Copper(II)-selective fluorimetric bulk optode membrane based on a 1-hydroxy-9,10-anthraquinone derivative having two propenyl arms as a neutral fluorogenic ionophore

A new optical chemical sensor has been developed for the selective determination of copper(II) ions in aqueous solutions. The reversible sensing system was prepared by incorporating 1-hydrpxy-2-(prop-2'-enyl)-4-(prop-2'-enyloxy)-9,10-anthraquinone (AQ) as a neutral Cu2+-selective fluoroionophore in the plasticized PVC membrane with potassium tetrakis(p-chlorophenyl borate) as an anionic additive. The response of the sensor is based on the fluorescence quenching of AQ by Cu2+ ions. At a pH 5.5, the proposed sensor displays a calibration response for Cu2+ over a wide concentration rang of 1.0 x 10(-2) to 1.0 x 10(-6) M, with a relatively fast response of less than 40 s. In addition to high stability and reproducibility, the sensor shows a unique selectivity towards Cu2+ ion with respect to common co-existing cations. The proposed fluorescence optode was applied successfully to the determination of copper(II) in black tea samples.     

Kinetic fluorimetric study of the oxidation reaction of folinic acid (leucovorin) with potassium permanganate. Determination in human urine

In this study a kinetic fluorimetric method for the determination of folinic acid (leucovorin, LV) in human urine has been developed. The fluorescence emission generated by the oxidation reaction between LV and potassium permanganate in alkaline medium has been monitored at 360nm (excitation wavelength 290nm). The effect of instrumental and experimental variables on the reaction was investigated and a 0.17M sodium hydroxide, 3.3x10(-5)M KMnO(4) concentration and a temperature of 70 degrees C were selected for the reaction. The concentration range has been optimized between 10 and 700ngml(-1) of LV. The correlation coefficient was 0.9989. The sensitivity of the proposed method is 9.5ngml(-1) (expressed as limit of detection in accordance with the Clayton criterion). The determination time per sample is smaller than 200s. The proposed kinetic fluorimetric method has been applied to the direct determination of this compound in human urine. Recovery values from urine samples, containing LV, range from 82 to 110% (mean 96%).     

Fluorimetric determination of hydrogen peroxide in water using acetaminophen

A fluorimetric procedure for the determination of hydrogen peroxide, based on the oxidation of acetaminophen with hydrogen peroxide in acidic medium, is described. The calibration graph was linear in the range 5.0 x 10(-8) - 2.4 x 10(-5) M hydrogen peroxide at an emission wavelength of 333 nm with excitation at 298 nm. The method has been applied to the determination of hydrogen peroxide in rain water, and the recoveries in milk samples were good.     

Use of surface-modified CdTe quantum dots as fluorescent probes in sensing mercury (II)

Thioglycolic acid (TGA)-capped CdTe quantum dots (QDs) were synthesized in aqueous medium, and their interaction with metal cations was studied with UV-vis absorption, steady-state and time-resolved fluorescence spectra. The results demonstrated that Hg(II), Cu(II) and Ag(I) could effectively quench the QD emission based on different action mechanisms: Cu(II) and Ag(I) quenched CdTe QDs because they bound onto particle surface and facilitated non-radiative electron/hole recombination annihilation of QDs; electron transfer process between the capping ligands and Hg(II) was mainly responsible for the remarkable quenching effect of Hg(II). To prevent the approach of metal cations to QD core, the original TGA-capped CdTe QDs were further coated by denatured bovine serum albumin (dBSA). It was found that the dBSA-coated CdTe QDs could be quenched effectively by Hg(II), but Cu(II) and Ag(I) could hardly quench the QDs even at fairly higher concentration levels because the dBSA shell layer effectively prevented the binding of metal cations onto the QD core. On the basis of this fact, a simple, rapid and specific method for Hg(II) determination was proposed. Under optimal conditions, the quenched fluorescence intensity increased linearly with the concentration of Hg(II) ranging from 0.012 x 10(-6) to 1.5 x 10(-6) mol L(-1). The limit of detection for Hg(II) was 4.0 x 10(-9) mol L(-1). The developed method was successfully applied to the detection of trace Hg(II) in real samples.     

An optode sensor for Cu2+ with high selectivity based on porphyrin derivative appended with bipyridine.

A porphyrin derivative (fluorophore) appended with bipyridine (ionophore) has been applied for preparation of a Cu2+-sensitive optical chemical sensor, which is based on fluorescence quenching of porphyrin derivative entrapped in a poly(vinyl chloride) membrane by the energy transfer process. The sensor exhibits a linear response toward Cu2+ in the concentration range 2.0 x 10(-8) - 1.0 x 10(-5) M, with a working pH range from 6.0 to 8.0 and a high selectivity. The detection limit is 5 x 10(-9) M. The response time for Cu2+ is less than 5 min with concentrations lower than 5 x 10(-6) M. The optode can be regenerated using 0.3 M EDTA (pH 9) and acetate buffer solution. The effect of the composition of the sensor membrane was studied, and the experimental conditions were optimized. The sensor has been used for direct determination of Cu2+ in water samples with satisfied results.     

Aqueous synthesis of type-II core/shell CdTe/CdSe quantum dots for near-infrared fluorescent sensing of copper(II)

Type-II core/shell CdTe/CdSe quantum dots (QDs) were synthesized in aqueous medium by employing thiol-capped CdTe QDs as core template and CdCl(2) and Na(2)SeSO(3) as shell precursors, respectively. Compared with the original CdTe cores, the core/shell CdTe/CdSe QDs showed an obvious red-shifted emission with the color-tune capability to the near-infrared (NIR) wavelength, because of the formation of an indirect excitation. The prepared QDs exhibited high stability and moderate fluorescence quantum yields (10-20%), and their core/shell heterostructure was characterized by UV-vis absorption, steady-state and time-resolved fluorescence spectra, X-ray powder diffraction, X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. The fluorescence of the core/shell QDs could be markedly quenched by Cu(II), and approximate concentrations of other physiologically important cations, such as Zn(II), Ca(II), Na(I) and K(I) etc., had no effect on the fluorescence. Based on this, a simple and rapid method for Cu(II) determination was proposed using the NIR CdTe/CdSe QDs as fluorescent probes. Under optimal conditions, the response was linearly proportional to the concentration of Cu(II) between 0.05 to 50.0 x 10(-6) mol L(-1), the limit of detection was 2.0 x 10(-8) mol L(-1). The developed method was successfully applied to the detection of trace Cu(II) in real samples.     

A fluorescent chemosensor for copper(II) based on a carboxylic acid-functionalized tris(2,2'-bipyridine)-ruthenium(II) complex.

In this research, bis(2,2'-bipyridine)(4-methyl-2,2'-bipyridine-4'-carboxylic acid)ruthenium(II).2PF(6)- complex (1), was first used as a fluorescent chemosensor to recognize Cu(II) in EtOH/H(2)O (1:1, v/v) solution. The response of the sensor is based on the fluorescence quenching of complex 1 by binding with Cu(II). The analytical performance characteristics of the proposed Cu(II)-sensitive chemosensor were investigated. The sensor can be applied to the quantification of Cu(II) with a linear range covering from 5.0 x 10(-8) to 1.0 x 10(-4) M and a detection limit of 4.2 x 10(-8) M. The experiment results show that the response behavior of 1 to Cu(II) is pH independent in medium condition (pH 4.0 - 8.0), and show excellent selectivity for Cu(II) over other transition metal cations.     

Kinetic fluorimetric determination of Cu(II) and Zn(II) by their incorporation reactions into a water-soluble porphyrin

Kinetics of incorporation of Cu, Zn, Fe, Co, Ni and Mn divalent ions into coproporphyrin-I in imidazole buffer solution, pH 7.0, has been studied by monitoring the decrease in fluorescence intensity of the free base porphyrin. All reactions followed simple second-order rate law, the rate constants being decreased in the order Zn > Cu > Co > Fe > Mn, Ni. the kinetic fluorimetric method for the determination of Cu(II) and Zn(II) using their incorporation reactions into the porphyrin was developed. Initial rate and fixed-time methods were used to construct calibration graphs over the range 0-1.0 x 10(-5)M of both metals. The analytical characteristics of the method and effect of foreign ions were determined. In the presence of sodium thiosulphate as the masking reagent the determination of micromolar concentrations of Zn in the presence of a 10-fold excess of Cu is possible.     

Selective fluorescent Hg(II) detection in aqueous solutions with a dye intermediate

A dye intermediate, 1-amino-8-naphthol-3,6-disulfonic acid sodium (ANDS) was first used to selectively recognize Hg(II) in aqueous solutions with its fluorescence being strong quenched. The fluorescence quenching of ANDS was attributed to the formation of an inclusion complex between Hg(II) and ANDS by 2:1 complex ratio (K=6.2 x 10(9)), which has been utilized as the basis of the fabrication of the Hg(II)-sensitive fluorescent chemosensor. The analytical performance characteristics of the proposed chemosensor were investigated. The sensor shows a linear response toward Hg(II) in the concentration range 2.9 x 10(-6) to 5.5 x 10(-5)M with a limit of detection of 5.3 x 10(-7)M, and a working pH range from 5.0 to 9.0. It shows excellent selectivity for Hg(II) over a large number of cations such as alkali, alkaline earth and transitional metal ions. The proposed method was utilized successfully for the detection of Hg(2+) in water samples.     

Single-sweep polarography of the copper(II)-3-hydroxy-1-p-sulphonatophenyl-3-phenyltriazene complex and its analytical applications

A polarographic investigation of the copper-3-hydroxy-1-p-sulphonatophenyl-3-phenyltriazene (HSPT) complex in 0.05 M sodium tetraborate medium is described and a simple and sensitive single-sweep polarographic method for the determination of trace amounts of copper in biological samples is proposed. The complex was shown to be Cu(HSPT)2 with log beta' = 11.38. The polarographic wave is caused by the reduction of copper(II) in the adsorbed complex to copper amalgam on the surface of a mercury electrode. The current peak is directly proportional to the concentration of copper in the range 8.0 x 10(-9)-4.0 x 10(-6) M and the detection limit is 5.0 x 10(-9) M.     

Fluorescent quenching method for determination of trace hydrogen peroxide in rain water

A simple and sensitive fluorescent quenching method for the determination of trace hydrogen peroxide (H(2)O(2)) has been proposed to determine hydrogen peroxide in rain water sample. The method is based on the reaction of H(2)O(2) with 3,3'-diethyloxadicarbocyanine iodide (DI) to form a compound which has no fluorescence in acetate buffer solution (pH 3.09). The maximum emission wavelength of the system is located at 604 nm with excitation at 570 nm. Under the optimal conditions, the calibration graph was obtained between the quenched fluorescence intensity and hydrogen peroxide concentration in the range of 5.0 x 10(-7) to 9.0 x 10(-4) mol L(-1). The proposed method was applied to determine H(2)O(2) in rain water samples, and the result was satisfactory. The mechanism involved in the reaction was also studied.     

Differences of Eu(III) and Cm(III) chemistry in ionic liquids: investigations by TRLFS

In this study the coordination structure and chemistry of Eu(III) and Cm(III) in the ionic liquid C(4)mimTf(2)N (1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) was investigated by time-resolved laser fluorescence spectroscopy (TRLFS). The dissolution of 1 x 10(-2) M Eu(CF(3)SO(3))(3) and 1 x 10(-7) M Cm(ClO(4))(3) in C(4)mimTf(2)N leads to the formation of two species for each cation with fluorescence emission lifetimes of 2.5 +/- 0.2 ms and 1.0 +/- 0.3 ms for the Eu-species and 1.0 +/- 0.3 ms and 300.0 +/- 50 micros for the Cm-species. The interpretation of the TRLFS data indicates a comparable coordination for both the lanthanide and actinide cation in this ionic liquid. The quenching influence of Cu(II) on the fluorescence emission of Eu(III) and Cm(III) was also measured by TRLFS. While Cu(ii) does not quench the Cm(III) fluorescence emission in C(4)mimTf(2)N the Eu(III) fluorescence emission lifetime for both Eu-species in C(4)mimTf(2)N decreases with increasing Cu(II) concentration. Stern-Volmer constants were calculated (k(SV) = 1.54 x 10(6) M(-1) s(-1) and k(SV) = 2.70 x 10(6) M(-1)). By contrast, the interaction of Cu(II) with Eu(III) and Cm(III) in water leads to a quenching of both the lanthanide and actinide fluorescence. The calculated Stern-Volmer constants are 1.20 x 10(4) M(-1) s(-1) for Eu(III) and 1.27 x 10(4) M(-1) s(-1) for Cm(III). The investigations show, while the chemistry of trivalent lanthanides and actinides is similar in an aqueous system it is dramatically different in ionic liquids. This difference in chemical behavior may provide the opportunity for a separation of lanthanides and actinides with regard to the reprocessing of nuclear fuel.     

Spectrofluorimetric Determination of Cu2＋ Using New Fluorogenic Reagent

A new synthesized fluorogenic reagent,8-[(2-pyridine)methylideneamino] quinoline (PMAQ), was utilized for spectrofluorimetric determination of Cu(II) at trace levels. PMAQ, a good fluorogenic reagent, though insoluble in water, but is soluble in ethanol and 20% ethanol-water. The excitation and the fluorescence wavelengths of PMAQ were 310 and 434 nm respectively. When the reagent was complexed with Cu(II), the fluorescence intensity decreased proportionally with the concentration of Cu(II) at pH 4.5 by a static quenching effect. The highest sensitivity to Cu^2＋ determination was shown to be at PMAQ concentration of 1.0×10^－5mol•L^－1. In order to enhance the quenching effect, the Cu(II)-PMAQ complex solution was kept at 22 ℃ for 20 min. Though the interferences by Co(II) and Fe(III) were very serious, they were however, completely eliminated by being masked with oxalate and ascorbate ions respectively. The linear dynamic range for Cu(II) determination was between 25—441 µg•L^－1 with the detection limit of 18 µg•L^－1 (RSD＝3.7%, n＝6). The proposed method was successfully applied to the determination of Cu(II) in real samples including human blood serum, commercial tea and wheat flour.     

New fluorimetric determination of hemoglobin used as a substitute of mimietic peroxidase

Hemoglobin (Hb) could be used as a substitute of peroxidase in the catalytic oxidation of tetra-substituted amino aluminum phthalocyanine (TAA1Pc) by H2O2. We found that the fluorescence of TAA1Pc (a red-region fluorescent dye with a maximum excitation wavelength at 606 nm and a maximum emission wavelength at 673 nm) could significantly be quenched by H2O2 in the presence of Hb. The value of F0/F (where the relative fluorescence intensity of blank solution and that of the sample solution containing Hb were given by F0 and F, respectively) is linearly related to the concentration of Hb. Based on this, a novel fluorimetric method was developed for the determination of Hb in aqueous solution. Under optimal conditions, Hb could be determined in the concentration range of 5 x 10(-11) - 12 x 10(-8) mol L(-1) with a detection limit of 1.5 x10(-11) mol L(-1). The relative standard deviation of ten replicate measurements was 1.95% for solution containing 1 x10(-9 ) mol L(-1) Hb. The proposed method has been applied to the analysis of Hb in human blood and the results were in good agreement with those reported by a hospital laboratory. So this is a new, high sensitive and precise fluorescence quenching method to determine Hb.     

Spectrophotometric determination of a nanomolar amount of ascorbic acid using its catalytic effect on copper(II) porphyrin formation

A simple, fast and sensitive flow-injection method is proposed for the determination of nanomolar amounts of ascorbic acid in tea, urine and blood. The procedure is based on the accelerating effect of a nanomolar level of ascorbic acid on the reaction of cooper(II) with 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin, H(2)tmpyp(4+). Ascorbic acid reduces Cu(II) to Cu(I) which catalyzes the incorporation of Cu(II) into H(2)tmpyp(4+) to form Cu(II)(tmpyp)(4+). In this method two solutions, one containing ascorbic acid and H(2)tmpyp(4+) and the other containing copper(II) and acetate buffer (pH 5.0), were injected into two flowing streams of water through two sample injectors of 120 mu1 sample volume. The mixture was allowed to react in a 2 m reaction coil and the colored solution of Cu(II)(tmpyp)(4+) was monitored at 550 nm (epsilon = 2.01 x 10(4)M(-1)cm(-1)). The present method was applied to the determination of ascorbic acid in tea, urea and blood. Reducing agents such as sugars and vitamins B(1), B(2), B(6) and B(12) did not give serious errors at a concentration of 10(-6) M for the determination of 1.0 x 10(-8)M ascrobic acid. The relative standard deviation of the present method was 2.8% for the determination of 1.0 x 10(-8)M ascorbic acid. The reaction mechanism was clarified from the kinetic results of the formation of Cu(II)(tmpyp)(4+) in the presence of various concentrations of ascorbic acid, copper(II) and hydrogen ion.     

Stopped-flow spectrophotometric determination of hydrogen peroxide with hemoglobin as catalyst

A rapid and sensitive method was proposed for the determination of hydrogen peroxide based on the catalytic effect of hemoglobin using o-phenylenediamine as the substrate. Stopped-flow spectrophotometric method was used to study the kinetic behavior of the oxidation reaction. The catalytic effectiveness of hemoglobin was compared with other four kinds of catalysts. The initial rate of the formation of the reaction product 2,3-diaminophenazine at the wavelength of 425 nm was monitored, permitting a detection limit of 9.2x10(-9) mol/l H(2)O(2). A linear calibration graph was obtained over the H(2)O(2) concentration range 5.0x10(-8)-3.5x10(-6) mol/l, and the relative standard deviation at a H(2)O(2) concentration of 5.0x10(-7) mol/l was 2.08%. Satisfied results were obtained in the determination of H(2)O(2) in real samples by this method.     

Functionalized CdS quantum dots-based luminescence probe for detection of heavy and transition metal ions in aqueous solution

Strong luminescence CdS quantum dots (QDs) have been prepared and modified with l-cysteine by a facile seeds-assistant technique in water. They are water-soluble and highly stable in aqueous solution. CdS QDs evaluated as a luminescence probe for heavy and transition metal (HTM) ions in aqueous solution was systematically studied. Five HTM ions such as silver(I) ion, copper(II) ion, mercury(II) ion, cobalt(II) ion, and nickel(II) ion significantly influence the photophysics of the emission from the functionalized CdS QDs. Experiment results showed that the fluorescence emission from CdS QDs was enhanced significantly by silver ion without any spectral shift, while several other bivalent HTM ions, such as Hg(2+), Cu(2+), Co(2+), and Ni(2+), exhibited effective optical quenching effect on QDs. Moreover, an obvious red-shift of emission band was observed in the quenching of CdS QDs for Hg(2+) and Cu(2+) ions. Under the optimal conditions, the response was linearly proportional to the concentration of Ag(+) ion ranging from 1.25 x 10(-7) to 5.0 x 10(-6)molL(-1) with a detection limit of 2.0 x 10(-8)molL(-1). The concentration dependence of the quenching effect on functionalized QDs for the other four HTM ions could be well described by typical Stern-Volmer equation, with the linear response of CdS QDs emission proportional to the concentration ranging from 1.50 x 10(-8) to 7.50 x 10(-7)molL(-1) for Hg(2+) ion, 3.0 x 10(-7) to 1.0 x 10(-5)molL(-1) for Ni(2+) ion, 4.59 x 10(-8) to 2.295 x 10(-6)molL(-1) for Cu(2+) ion, and 1.20 x 10(-7) to 6.0 x 10(-6)molL(-1) Co(2+) ion, respectively. Based on the distinct optical properties of CdS QDs system with the five HTM ions, and the relatively wide linear range and rapid response to HTM ions, CdS QDs can be developed as a potential identified luminescence probe for familiar HTM ions detection in aqueous solution.     

Bis(2-hydroxyacetophenone)ethylenediimine as a neutral carrier in a coated-wire membrane electrode for lead(II).

A coated-wire ion-selective electrode (CWISE), based on a Schiff base as a neutral carrier, was successfully developed for the detection of Pb(II) in aqueous solution. CWISE exhibited a linear response with a Nernstian slope of 29.4 +/- 0.5 mV/decade within the concentration range of 1.0 x 10(-5) - 1.0 x 10(-1) M lead ion. CWISE has shown detection limits of 5.0 x 10(-6) M. The electrode exhibited good selectivity over a number of alkali, alkaline earth, transition and heavy metal ions. This sensor yielded a steady potential within 10 to 20 s at a linear dynamic range. The electrode was suitable for use in aqueous solutions in a pH range of 2.0 to 5.0. Applications of this electrode for the determination of lead in real samples and as indicator electrode for potentiometric titration of Pb2+ ion using K2CrO4 are reported.     

A simple and rapid spectrophotometric method for determination of ultra trace amounts of thallium(III) with 4-(4'-N,N-dimethylaminophenyl) urazole as a new reagent

A simple and selective spectrophotometric method is proposed for the determination of ultra trace amounts of Tl(III). The reported method is based on the oxidation of 4-(4'-N,N-dimethylaminophenyl)urazole (DAPU) to the corresponding triazolinedione (TAD) by Tl(III) at pH 4.0. The reaction was monitored spectrophotometrically by measuring the increasing color of TAD compound at 514 nm by the fixed-time method. At a given time of 2.0 min at 30 degrees C, the working range of calibration was 5.0 x 10(-8) - 2.0 x 10(-5) M Tl(III) and detection limit of 5.0 x 10(-8) M was obtained. The influences of pH, reagent concentration, ionic strength and temperature were studied. The effect of diverse ions on the determination of Tl(III) by the proposed method was also investigated. Thallium in real samples was determined by this method, with satisfactory results.     

Influence of Cu(II) on the interaction between sulfite and horseradish peroxidase in vitro

This paper discussed the quantitative influence of Cu(II) on the interaction between horseradish peroxidase (HRP) and sulfite (SO3(2-)), which is a derivate of sulfite dioxide in human bodies, by using fluorescence spectrum and ultraviolet (UV) absorption spectrometry in vitro. The results show that under the conditions of physiological pH and room-temperature, Cu(II) can bind strongly with both the protein part and the ferroporphyrin part in HRP at a low concentration (10(-4) mol L(-1)), and the combination constants are 2.047 x 10(3) and 7.66 x 10(2) L mol(-1), respectively. Under the same conditions, SO3(2-) at low concentrations (<0.15 mol L(-1)) has little quenching for the fluorescence of HRP at 330 nm, and the combination constant is 0.108 L mol(-1). While the fluorescence intensity at 440 nm enhance gradually with the increased concentration of SO3(2-) (<0.1 mol L(-1)), and the combination constant is 8.219 L mol(-1). These indicate that SO3(2-) at low concentration has little reaction with the enzyme protein part in HRP but obvious reaction with the ferroporphyrin part in HRP. After SO3(2-) at low concentrations is added into the HRP-Cu(II) binary system, the reaction constants between SO3(2-) and the enzyme protein part in HRP increase rapidly. Compared with the absence of Cu(II), the combination constant of SO3(2-) with the enzyme protein part in HRP increases nearly 70 times with a certain Cu(II) concentration (5.0 x 10(-4) mol L(-1)) in the system. However, the presence of Cu(II) in the system has little effect on the reaction constants between SO3(2-) and the ferroporphyrin part in HRP.