Spectrophotometric determination of chloride in PtAl(2)O(3)/SiO(2) catalysts with Hg(SCN)(2)Fe(3+) reagent

A method is described for the determination of chloride in PtAl(2)O(3)/SiO(2) catalysts, based on its extraction with alkali followed by reaction with Hg(SCN)(2)Fe(3+) reagent and spectrophotometric measurement at 460 nm. Beer's law is obeyed in the concentration range 5-75 mug of chloride in 25 ml of aqueous solution. The molar absorptivity is 1.99 x 10(3) l.mole(-1).cm(-1). The rapid colour development, excellent reproducibility and absence of interference from the species most often present in the catalysts are the advantages of the method.     

Chemical reactions inside structured nano-environment: S(N)2 vs. E2 reactions for the F(-) + CH(3)CH(2)Cl system

A new receptor for S(N)2 transition states, named NPTROL, is proposed. This molecule has a cavity and four hydroxyl groups that are able to interact with ionic S(N)2 and E2 transition states. Its catalytic effect and selectivity was investigated through high level ab initio calculations using the fluoride ion plus ethyl chloride in DMSO solution as a model system. Calculations at the ONIOM[CCSD(T)/6-311+G(2df,2p)?:?MP2/BASIS1] level of theory and solvent effects, included through a continuum solvation model, indicate that NPTROL is able to catalyze the S(N)2 pathway and has an inverse effect on the E2 pathway. Inside the NPTROL cavity, the ΔG(?) for the S(N)2 transition state is 5.00 kcal mol(-1) lower than that for E2, and as a consequence this reaction becomes highly selective toward the S(N)2 product.     

Determination of nickel with 2-(2-quinolylazo)-5-diethylaminoaniline as a chromogenic reagent.

A sensitive, selective and rapid method for the determination of nickel based on a rapid reaction of nickel(II) with 2-(2-quinolylazo)-5-diethylaminoaniline (QADEAA) has been developed. In the presence of pH = 6.0 ammonia-ammonium chloride buffer solution and sodium dodecyl sulfonate (SDS) medium, QADEAA reacts with nickel to form a violet complex having a molar ratio of 1:2 (nickel to QADEAA). The molar absorptivity of the complex is 1.38 x 10(5) l mol(-1) cm(-1) at 595 nm. Beer's law is obeyed in the range of 0.01-0.4 microg/ml. This method had been applied to the determination of nickel with good results.     

双（呋喃甲醛）缩二胺钴（II）配合物的合成及其氧合和催化氧化性能研究

合成和表征了氯化双（呋喃甲醛）缩邻苯二胺合钴（II）（1）、氯化双（呋 喃甲醛）缩乙二胺合钴（II）（2）、氯化双（呋喃甲醛）缩1,2-丙二胺合钴（ II）（3）和氯化双（呋喃甲醛）缩1,3-丙二胺合钴（II）（4）。在吡啶溶液中 和不同温度下,测定了配合物的饱和吸氧量,求出了氧加合常数和热力学参数ΔH °,ΔS°。并以这些配合物为催化剂,活化分子氧氧化环已烯得到高选择性的烯 丙位氧化产物。讨论了温度、配体结构对配合物氧合性能的影响和配体结构以及添 加NHPI（N-羟基邻苯二甲酰亚胺）对环已烯氧化反应的影响。     

Synthesis, amino-functionalization of mesoporous silica and its adsorption of Cr(VI)

Mesoporous silica materials with a centered rectangular symmetry (cmm) have been synthesized through a facile direct-templating method using tetraethylorthosilicate (TEOS) and amphiphilic block co-polymers Pluronic P123 under acidic conditions. The amino groups have been grafted to as-synthesized mesoporous silica by [1-(2-amino-ethyl)-3-aminopropyl]trimethoxysilane (AAPTS). Thus obtained amino-functionalized mesoporous silica (denoted as NN-silica) was used for sequestration of Cr(VI) from aqueous solution. After sequestration of Cr(VI), the sample was denoted as Cr(VI)-silica. The parent mesoporous silica, NN-silica and Cr(VI)-silica were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and N(2) adsorption-desorption isotherms. XRD and TEM results confirm that the structure of these samples is centered rectangular symmetry (cmm). N(2) adsorption-desorption isotherms show that there is a remarkable decrease in surface area and pore volume for NN-silica (S(BET)=54.5 m(2)g(-1), V(P)=0.09 cm(3)g(-1)) and Cr(VI)-silica (S(BET)=53.2 m(2)g(-1), V(P)=0.07 cm(3)g(-1)) compared to the parent mesoporous silica (S(BET)=444.0 m(2)g(-1), V(P)=0.71 cm(3)g(-1)). The BJH desorption average diameter of NN-silica, Cr(VI)-silica and the parent mesoporous silica is 4.40 nm, 4.07 nm and 5.11 nm, respectively. The results reveal the channels of as-synthesized mesoporous silica are essentially grafted with abundant amino groups and loaded with Cr(VI). The adsorption experiment results show that the functionalized mesoporous silica materials possess an increased Cr(VI) adsorption capacity and the maximum Cr(VI) loadings at 25, 35 and 45 degrees C can reach 2.28, 2.86 and 3.32 mmol/g, respectively.     

High-frequency and -field electron paramagnetic resonance of high-spin manganese(III) in tetrapyrrole complexes

High-field and -frequency electron paramagnetic resonance (HFEPR) spectroscopy has been used to study three complexes of high spin Manganese(III), 3d4, S = 2. The complexes studied were tetraphenylporphyrinatomanganese(III) chloride (MnTPPCI), phthalocyanatomanganese(III) chloride (MnPcCl), and (8,12-diethyl-2,3,7,13,17,18-hexamethylcorrolato)manganese(III) (MnCor). We demonstrate the ability to obtain both field-oriented (single-crystal like) spectra and true powder pattern HFEPR spectra of solid samples. The latter are obtained by immobilizing the powder, either in an n-eicosane mull or KBr pellet. We can also obtain frozen solution HFEPR spectra with good signal-to-noise, and yielding the expected true powder pattern. Frozen solution spectra are described for MnTPPCl in 2:3 (v/v) toluene/CH2Cl2 solution and for MnCor in neat pyridine (py) solution. All of the HFEPR spectra have been fully analyzed using spectral simulation software and a complete set of spin Hamiltonian parameters has been determined for each complex in each medium. Both porphyrinic complexes (MnTPPCl and MnPcCl) are rigorously axial systems, with similar axial zero-field splitting (zfs): D approximately -2.3 cm(-1), and g values quite close to 2.00. In contrast, the corrole complex, MnCor, exhibits slightly larger magnitude, rhombic zfs: D approximtely -2.6 cm(-1), absolute value(E) approximately 0.015 cm(-1), also with g values quite close to 2.00. These results are discussed in terms of the molecular structures of these complexes and their electronic structure. We propose that there is a significant mixing of the triplet (S = 1) excited state with the quintet (S= 2) ground state in Mn(III) complexes with porphyrinic ligands, which is even more pronounced for corroles.     

Palladium nanoparticles supported on poly (N-vinylpyrrolidone)-grafted silica as new recyclable catalyst for Heck cross-coupling reactions

Novel catalytic system based on palladium nanoparticles supported on poly (N-vinylpyrrolidone) (PVP) grafted silica was prepared. Aminopropylsilica was reacted with acryloyl chloride to form acrylamidopropylsilica, and onto this functionalized silica vinylpyrrolidone monomer was polymerized by free-radical polymerization. The complexation of PVP-grafted silica with PdCl₂ was carried out to obtain the heterogeneous catalytic system. X-ray diffraction (XRD) technique and transmission electron microscopy (TEM) image showed that palladium dispersed through the support in nanometer size. This catalytic system exhibited excellent activity in cross-coupling reactions of aryl iodides, bromides and also chlorides with olefinic compounds in Heck-Mizoraki reactions in short reaction time and high yields. Elemental analysis of Pd by inductively coupled plasma (ICP) technique and hot filtration test showed low leaching of the metal into solution from the supported catalyst. The catalyst can be reused several times in repeating Heck reaction cycles without considerable loss in its activity.     

Green oxidation of 2-imidazolines with tert-butyl hydroperoxide catalyzed by supported manganese(III) porphyrin in water

Green oxidation of 2-substituted imidazolines with tert-butyl hydroperoxide catalyzed by tetraphenylporphyrinatomanganese(III) chloride, [Mn(TPP)Cl], supported on polystyrene and silica bound imidazole is reported. A variety of 2-imidazolines were efficiently converted to their corresponding imidazoles by these catalytic systems in H₂O. Ultrasonic (US) irradiation enhanced the catalytic activity of these catalysts and higher product yields were observed at shorter reaction times. These catalysts were re-used several times without significant loss of their catalytic activities. The effect of reaction parameters such as catalyst amount, reaction temperature, and the effect of US irradiation on the catalytic activity was also investigated.     

Silica Chloride (SiO2-Cl) and Trimethylsilyl Chloride (TMSCl) Promote Facile and Efficient Dehydration of Tertiary Alcohols

Abstract

Silica chloride (SiO₂-Cl), as a heterogeneous reagent, has been used for the efficient dehydration of tertiary alcohols under mild reaction conditions. For comparison, we have also used trimethylsilyl chloride (TMSCl) as a homogeneous reagent for this purpose. We have found that silica chloride is a more efficient reagnet than trimethylsilyl chloride for this purpose. Handling of SiO₂-Cl is much safer and easier than TMSCl, especially for large-scale operation. The selectivity of the method is also demonstrated by several competitive reactions. Ether formation, rearranged products, and polymerization have not been observed in the reactions.     

Heterometallic Co(III)(4)Fe(III)(2) Schiff Base Complex: Structure, Electron Paramagnetic Resonance, and Alkane Oxidation Catalytic Activity

The heterometallic complex [Co(4)Fe(2)OSae(8)]·4DMF·H(2)O (1) was synthesized by one-pot reaction of cobalt powder with iron chloride in a dimethylformamide solution of salicylidene-2-ethanolamine (H(2)Sae) and characterized by single crystal X-ray diffraction analysis, magnetic measurements, high frequency electron paramagnetic resonance (HF-EPR), and M?ssbauer spectroscopies. The exchange coupling in the Fe(III)-Fe(III) pair is of antiferromagnetic behavior with J/hc = -190 cm(-1). The HF-EPR spectra reveal an unusual pattern with a hardly detectable triplet signal of the Fe(III) dimer. The magnitude of D (ca. 13.9 cm(-1)) was found to be much larger than in related dimers. The catalytic investigations disclosed an outstanding activity of 1 toward oxidation of cycloalkanes with hydrogen peroxide, under mild conditions. The most efficient system showed a turnover number (TON) of 3.57 × 10(3) with the concomitant overall yield of 26% for cyclohexane, and 2.28 × 10(3)/46%, respectively, for cyclooctane. A remarkable turnover frequency (TOF) of 1.12 × 10(4) h(-1) (the highest initial rate W(0) = 3.5 × 10(-4) M s(-1)) was achieved in oxidation of cyclohexane. Kinetic experiments and selectivity parameters led to the conclusion that hydroxyl radicals are active (attacking C-H bonds) species. Kinetic and electrospray ionization mass spectrometry (ESI-MS) data allowed us to assume that the trinuclear heterometallic particle [Co(2)Fe(Sae)(4)](+), originated from 1 in solution, could be responsible for efficient generation of hydroxyl radicals from hydrogen peroxide.     

Functionalized mesoporous silica supported copper(II) and nickel(II) catalysts for liquid phase oxidation of olefins

Highly ordered 2D-hexagonal mesoporous silica has been functionalized with 3-aminopropyltriethoxysilane (3-APTES). This is followed by its condensation with a dialdehyde, 4-methyl-2,6-diformylphenol to produce an immobilized Schiff-base ligand (I). This material is separately treated with methanolic solution of copper(II) chloride and nickel(II) chloride to obtain copper and nickel anchored mesoporous materials, designated as Cu-AMM and Ni-AMM, respectively. The materials have been characterized by Fourier transform infrared (FT-IR) and UV-vis diffuse reflectance (DRS) spectroscopy, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), N(2) adsorption-desorption studies and (13)C CP MAS NMR spectroscopy. The metal-grafted mesoporous materials have been used as catalysts for the efficient and selective epoxidation of alkenes, viz. cyclohexene, trans-stilbene, styrene, α-methyl styrene, cyclooctene and norbornene to their corresponding epoxides in the presence of tert-butyl hydroperoxide (TBHP) as the oxidant under mild liquid phase conditions.     

Catalytic dioxygen activation by (nitro)(meso-tetrakis(2-n-methylpyridyl)porphyrinato)cobalt(III) cation derivatives electrostatically immobilized in nafion films: an experimental and DFT investigation

Complexes of the (nitro)( meso-tetrakis(2- N-methylpyridyl)porphyinato)cobalt(III) cation, [LCoTMpyP(2)(NO 2)] (4+), in which L = water or ethanol have been immobilized through ionic attraction within Nafion films (Naf). These immobilized six-coordinate species, [LCoTMPyP(2)(NO 2)/Naf], have been found to catalyze the oxidation of triphenylphosphine in ethanol solution by dioxygen, therefore retaining the capacity to activate dioxygen catalytically without an additional reducing agent as was previously observed in nonaqueous solution for the non-ionic (nitro)cobalt porphyrin analogs. Heating these immobilized six-coordinate species under vacuum conditions results in the formation of the five-coordinate nitro derivatives, [CoTMPyP(2)(NO 2)/Naf] at 85 degrees C and [CoTMPyP(2)/Naf] at 110 degrees C. The catalytic oxidation of gas-phase cyclohexene with O 2 is supported only by the resulting immobilized five-coordinate nitro complex as was previously seen with the corresponding solution-phase catalyst in dichloromethane solution. The simultaneous catalytic oxidation of triphenylphosphine and cyclohexene with O 2 in the presence of the Nafion-bound six-coordinate ethanol nitro complex is also observed; however, this process is not seen for the CoTPP derivative in dichloromethane solution. The oxidation reactions do not occur with unmodified Nafion film or with Nafion-supported [BrCo(III)TmpyP]/Naf or [Co(II)TmpyP]/Naf, indicating the necessity for the nitro/nitrosyl ligand in the oxidation mechanism. The existence of a second reactive intermediate is indicated because the two simultaneous oxidation reactions depend on two distinct oxygen atom-transfer steps having different reactivity. The absence of homogeneous cyclohexene oxidation by the six-coordinate (H 2O)CoTPP(NO 2) derivatives in the presence of Ph 3P and O 2 in dichloromethane solution indicates that the second reactive intermediate is lost by an unidentified route only in solution, implying that the immobilization of it in Nafion allows it to react with cyclohexene. Although direct observation of this species has not been achieved, a comparitive DFT study of likely intermediates in several catalytic oxidation mechanisms at the BP 6-31G* level supports the possibility that this intermediate is a peroxynitro species on the basis of relative thermodynamic accessibility. The alternate intermediates evaluated include the reduced cobalt(II) porphyrin, the dioxygen adduct cobalt(III)-O 2 (-), the oxidized cobalt(II) pi-cation radical, and the nitrito complex, cobalt(III)-ONO.     

Controlled-pore silica glass modified with N-propylsalicylaldimine for the separation and preconcentration of trace Al(III), Ag(I) and Hg(II) in water samples.

Controlled-pore silica glass modified with N-propylsalicylaldimine (SCPSG) has been investigated as a surface-active matrix for the separation of some metal ions. The porous silica glass base was confirmed to have better stability towards hydrolysis in aqueous solution buffered at pH=9 in comparison to silica gel, which showed twice the surface area of controlled-pore silica glass. The different analytical parameters affecting the batch mode separation and preconcentration of trace Al(II), Ag(I) and Hg(II) in environmental samples using SCPSG, prior to their determination using inductively coupled plasma mass spectrometry (ICP-MS), were studied. The optimum conditions are pH 9.0 +/- 0.1, time of stirring 30 min and the eluent concentration 0.5 mol dm(-3) HNO3. The ion-exchange capacity of SCPSG with respect to Al(III), Ag(I) and Hg(II) was 0.27, 0.18 and 0.23 mmol g(-1), respectively. The recovery values for the metal ions were 96.8 +/- 0.86, 98.1 +/- 0.60 and 96.2 +/- 1.06%, and the analytical detection limits were 26.1, 1.49 and 0.44 pg cm(-3), respectively, for a preconcentration factor of 100. The method has been applied to the determination of the investigated metal ions in natural water samples as well as certified and reported samples and the results were found to be accurate.     

Interaction of nickel with 4-(2'-benzothiazolylazo) salicylic acid (BTAS) and simultaneous first-derivative spectrophotometric determination of nickel(II) and iron(III)

The solution properties of nickel complex with 4-(2'-benzo-thiazolylazo) salicylic acid (BTAS) have been studied by zero-order absorption spectrophotometry in 40% (v/v) ethanol at 20 degrees C and an ionic strength of 0.1 mol dm(-3) (KNO(3)). The equilibria that exist in solution were established and the basic characteristics of complexes formed were determined. A new direct spectrophotometric method for the determination of trace amounts of the nickel is proposed based on the formation of the Ni (BTAS) complex at pH 7.0. The absorption maximum, molar absorbtivity, and Sandell's sensitivity of 1:1 (M:L) complex are 525 nm, 0.6 x 10(4) l mol(-1) cm(-1) and 2.824 x 10(-9) microg cm(-2), respectively. The use of first-derivative spectrophotometry eliminates the interference of iron and enables the simultaneous determination of nickel and iron using BTAS. Quantitative determination of Ni(II) and Fe(III) is possible in the range (0.59-7.08) and (2.1-8.4) microg ml(-1), respectively with a relative standard deviation of 0.5%. The proposed method has been successfully applied to the simultaneous spectrophotometric determination of nickel and iron in steel alloys and aluminum alloys.     

Mesostructured gamma-Al(2)O(3) with a lathlike framework morphology

A novel three-step assembly pathway is reported for the formation of a mesostructured alumina with framework pore walls made of crystalline, lathlike gamma-Al(2)O(3) nanoparticles. In the initial supramolecular assembly step of the pathway a mesostructured alumina with a wormhole framework morphology and amorphous pore walls is assembled through the hydrolysis of Al(13) oligocations and hydrated aluminum cations in the presence of a nonionic diblock or triblock poly(ethylene oxide) surfactant as the structure-directing porogen. The walls of the initial mesostructure are then transformed in a second hydrolysis step at a higher temperature to a surfactant-boehmite mesophase, denoted MSU-S/B, with a lathlike framework made of boehmite nanoparticles. A final thermal reaction step topochemically converts the intermediate boehmitic mesophase to a mesostructure with crystalline gamma-Al(2)O(3) pore walls, denoted MSU-gamma, with retention of the lathlike framework morphology. The boehmitic MSU-S/B intermediates formed from the chloride salts of aluminum incorporate chloride anions into the mesostructure. Chloride ion incorporation tends to disorder the nanoparticle assembly process, leading to a broadening of the slit-shaped framework pores in the final MSU-gamma phases and to the introduction of intra- and interparticle textural mesopores. However, the well-ordered MSU-gamma phases made from aluminum nitrate as the preferred aluminum reagent exhibit narrow framework pore size distributions and average pore sizes that are independent of the surfactant size and packing parameter, in accord with a lathlike framework assembled from nanoparticles of regular size and connectivity. The high surface areas ( approximately 300-350 m(2)/g) and pore volumes ( approximately 0.45-0.75 cm(3)/g) provided by these mesostructured forms of gamma-Al(2)O(3) should be useful in materials and catalytic applications where the availability of surface Lewis acid sites and the dispersion of supported metal centers govern reactivity.     

Catalytic Hydrolysis of Phosphate Diesters by Lanthanide(III) Cryptate (2.2.1) Complexes

Lanthanide(III) Cryptate (2.2.1) chlorides (Ln(2.2.1)Cl(3); Ln = La (1a), Ce(1b), and Eu(1c); (2.2.1) = 4,7,13,16,21-pentaoxa-1,10-diazabicyclo[8.8.5]tricosane) are effective for the catalytic hydrolysis of bis(4-nitrophenyl) phosphate. Kinetic studies reveal that the europium(III) complex (1c) catalyzes the hydrolysis to produce 6 equiv of 4-nitrophenol with a significant rate (k(1) = 1.5 x 10(-)(4) s(-)(1) at 0.40 mM) at pH 8.5 and 50 degrees C. The catalytic activity of the complexes is increased with decreasing the ionic size, i.e, La < Ce < Eu. While the use of hydrogen peroxide further increase the activity of 1b (k(1) = 1.6 x 10(-)(3) s(-)(1) at 0.40 mM), the presence of molecular oxygen does not affect the activity at all. Crystal of 1a.CH(3)OH([La(2.2.1)(Cl)(2)](Cl)(CH(3)OH)) belongs to the space group Pnma with a = 17.072(3) ?, b = 19.037(3) ?, c = 14.725(2) ?, V = 4786(1) ?(3), Z = 8, D(x)() = 1.691 g cm(-)(3), &mgr; = 21.7 cm(-)(1). The encryptated metal ion is nine-coordinated, and all the heteroatoms of the cryptate (2.2.1) ligand coordinate the metal center to form a bowl-shaped structure. Two coordinating chloride anions are located on the open face with a cis geometry. The existence of coordinated water to the europium(III) complex 1c in the aqueous solution was confirmed by time-resolved Eu(III) luminescence spectroscopy. From the decay constants in H(2)O and D(2)O, the numbers of coordinated water molecules (q) are found to be 3.02 at pH of 5.0. The above kinetic and spectroscopic observation are supportive of mechanisms in which the metal complexes act as a center for binding and activation as well as a source of nucleophilic metal hydroxides.     

Magnetism, electron paramagnetic resonance, electrochemistry, and mass spectrometry of the pentacopper(II)-substituted tungstosilicate [Cu5(OH)4(H2O)2(A-alpha-SiW9O33)2]10-, a model five-spin frustrated cluster

The dimeric, pentacopper(II)-substituted tungstosilicate [Cu(5)(OH)(4)(H(2)O)(2)(A-alpha-SiW(9)O(33))(2)](10)(-) (1) has been characterized by single-crystal X-ray diffraction, elemental analysis, IR, electrochemistry, magnetic measurements, electron paramagnetic resonance (EPR), and mass spectrometry (MS). Magnetization and high-field EPR measurements reveal that the pentameric copper core {Cu(5)(OH)(4)(H(2)O)(2)}(6+) of 1 exhibits strong antiferromagnetic interactions (J(a) = -51 +/- 6 cm(-)(1), J(b) = -104 +/- 1 cm(-)(1), and J(c) = -55 +/- 3 cm(-)(1)) resulting in a spin S(T) = (1)/(2) ground state. EPR data show that the unpaired electron spin density is localized on the spin-frustrated apical Cu(2+) ion with g(zz) = 2.4073 +/- 0.0005, g(yy) = 2.0672 +/- 0.0005, g(xx) = 2.0240 +/- 0.0005, and A(zz) = -340 +/- 20 MHz (-0.0113 cm(-)(1)). 1 can therefore be considered as a model system for a five-spin, electronically coupled, spin-frustrated system. Polyanion 1, which is stable over a wide pH domain (pH 1-7), was characterized by cyclic voltammetry (CV) in a pH 5 medium. Its CV was constituted by an initial two-step reduction of the Cu(2+) centers to Cu(0) through Cu(+), followed at more negative potential by the redox processes of the W centers. Controlled potential coulometry of 1 allows for the reduction of the five Cu(2+) centers, as seen by consumption of 10.05 +/- 0.05 electrons per molecule. Polyanion 1 triggers efficiently the electrocatalytic reduction of nitrate and nitrite, and it also catalyzes the reduction of N(2)O. To our knowledge, this is the first example of N(2)O catalytic reduction by a polyoxoanion. Fourier transform ion cyclotron resonance MS was used to unambiguously assign the molecular weight of the solution-phase species 1 and the oxidation states of the Cu atoms in the central {Cu(5)(OH)(4)(H(2)O)(2)}(6+) core. Infrared (IR) multiphoton dissociation MS/MS of 1 showed evidence of a condensation process similar to bronze formation at low irradiation intensity. Higher IR intensity resulted in the formation of stable fragments consistent with those previously observed in the solution chemistry of polyoxoanions.     

Surface-Mediated Organometallic Synthesis: High-Yield Preparations of Neutral and Anionic Osmium Carbonyl Clusters by Controlled Reduction of Silica-Supported [Os(CO)(3)Cl(2)](2) and OsCl(3) in the Presence of Na(2)CO(3) or K(2)CO(3)

[Os(3)(CO)(12)], [H(4)Os(4)(CO)(12)], [H(2)Os(4)(CO)(12)](2)(-), [Os(5)C(CO)(14)](2)(-), and [Os(10)C(CO)(24)](2)(-) have been synthesized selectively and in high yields by reductive carbonylation or hydrogenation of OsCl(3) or alpha-[Os(CO)(3)Cl(2)](2) supported on silica in the presence of alkali carbonates. The selectivity of the reaction is controlled by the choice of (i) the nature and quantity of the alkali carbonate (Na(2)CO(3) or K(2)CO(3)) added to silica, (ii) temperature, (iii) reaction time, and (iv) the gas-phase composition (CO, CO + H(2), or H(2)). These surface-mediated syntheses are often more selective and more efficient and usually require less drastic conditions than the best known syntheses in solution, confirming the potential use of the silica surface as a new reaction medium to prepare both neutral and anionic metal carbonyl clusters.     

Visual colorimetry for trace antimony(V) by ion-pair solid-phase extraction with bis[2-(5-chloro-2-pyridylazo)-5-diethylaminophenolato]cobalt(III) on a PTFE type membrane filter.

A new visual colorimetry for trace antimony(V) based on ion-pair solid-phase extraction to a PTFE-type membrane filter with bis[2-(5-chloro-2-pyridylazo)-5-diethylaminophenolato]cobalt(III) ion ([Co(5-Cl-PADAP)(2)](+)) has been developed. Experiments showed that hexachloroantimonate(V) ion (SbCl(6)(-)) was adsorbed with [Co(5-Cl-PADAP)(2)](+) to the front surface of the PTFE filter. The adsorption of antimony(V) ion was promoted by the addition of lithium chloride as a source of chloride ion. The excess reagent of [Co(5-Cl-PADAP)(2)](+) was eluted by rinsing with a 10 wt% methanol aqueous solution. In this case, the slow rate of the hydrolysis reaction of SbCl(6)(-) and the difference of the hydrophobicity of the ion pairs were important for adsorption and separation with a PTFE-type membrane filter. The antimony(V) concentration was determined through a visual comparison with a standard series. The visual detection limit was 0.10 microg. The calibration curve assessed with the reflection spectrometric responses at 580 nm was linear in the concentration range of 0.10 - 1.2 microg (r = 0.996). The proposed method has been applied to the determination of sub-microgram levels of antimony(V) ion in water samples.     

A FACILE SYNTHESIS OF N-ARYL AZIRIDINES

Reaction of N-aryl-β-amino alcohols with p-toluenesulphonyl chloride under phase transfer catalytic condition gave the corresponding N-aryl aziridines in good yields, whereas N-alkyl-β-amino alcohol [for e.g., L-ephedrine] gave the corresponding N-tosyl derivative as the major product, along with the expected N-alkyl aziridines in lower yield.