碳氟醇对阳离子表面活性剂表面活性及胶团反离子结合度的影响

用表面张力及电动势法研究了C₁₀H₂₁N(CH₃)3Br、C₁₂H₂₅N(CH₃)3Br与C₃F₇CH₂OH混合水溶液的表面与胶团性质。结果表明,对于阳离子表面活性剂,C₃F₇CH₂OH的加入一方面增加表面活性,另一方面降低胶团反离子结合度。后者不同于阴离子表面活性剂/C₃F₇CH₂OH混合体系,可归因于C₃F₇CH₂OH略有酸性,因而具备一些类似阴离子表面活性剂的性质。     

CuO掺杂C3N对HF吸附性能的第一性原理研究

本文选择CuO作为掺杂物,新型类石墨烯二维材料C₃N为基底,基于第一性原理研究了本征C₃N以及掺杂单个和4～6个CuO分子的C₃N对HF的吸附过程,计算分析了各吸附体系的吸附能、差分电荷密度、态密度和恢复时间等参数.结果表明,经过掺杂改性后的C₃N对HF的吸附要强于本征C₃N,1CuO-C₃N对HF的吸附性能最好,5CuO-C₃N其次,而4CuO-C₃N与6CuO-C₃N对HF仅为物理吸附.另外还发现掺杂体系的能带带隙越小、金属性越强、其对HF的吸附作用就越强.再结合恢复时间,确定即使在高温环境中1CuO-C₃N也能实现对HF的有效去除,因此1CuO-C₃N可以作为HF的气体吸附剂应用于氟碳类绝缘气体的废气处理领域.     

新型双苯并环己酮芳亚胺镍(Ⅱ)催化降冰片烯与甲基丙烯酸丁酯共聚合

采用自制的新型双苯并环己酮芳亚胺镍催化剂双苯并环己酮-2,6-二甲基苯亚胺镍(Ⅱ)(Ni{C₁₀H₈(O)C[2,6-C₆H₃(CH₃)₂N]CH₃}₂, C1)和双苯并环己酮-2,6-二氯苯亚胺镍(Ⅱ)(Ni{C₁₀H₈(O)C[2,6-C₆H₃Cl₂N]CH₃}₂, C2)与三五氟苯硼[B(C₆F₅)₃]结合, 在一定的反应条件下可高效催化降冰片烯(NB)与甲基丙烯酸正丁酯(n-BMA)的乙烯基加成共聚合. 提出了催化聚合时存在的可能失活机理; 研究了不同单体投料比对催化活性、 产率及产物性能的影响. 根据Kelen-Tüdõs方法分别估算出2种单体在不同催化体系下的竞聚率, 即当催化体系为C1/B(C₆F₅)₃时, 竞聚率r_n-BMA=0.02, r_NB=16.28, r_NB·r_n-BMA=0.32; 当催化体系为C2/B(C₆F₅)₃时, r_n-BMA=0.01, r_NB=64.83, r_NB·r_n-BMA=0.65. 结果表明, 2种单体在2种体系催化下均为无规共聚合.     

有水条件下路易斯酸B(C6F5)3对醛酮的选择性催化还原

近年路易斯酸B（C₆F₅）₃催化的醛酮还原反应研究表明，路易斯酸B（C₆F₅）₃也可以作为一种"耐水"的催化剂在"有水"条件下进行催化反应.这些研究成果对进一步扩展受限路易斯酸碱对（FLPs）化学在水相中的应用及其发展至关重要.以硅烷作为还原剂，在路易斯酸B（C₆F₅）₃催化下成功对14种不同取代的醛酮在温和条件下实现了高效地还原成醇反应，产率可高达100%.通过核磁共振分析对反应机理进行的研究表明，在有水条件下，底物羰基氧与催化剂硼烷之间存在以水介导的相互作用，即可能存在"R¹R²C=O--H-O（-H）--B（C₆F₅）₃"的三组分络合形式.对不同路易斯碱与水及硼烷所组成的"LB--H-O（-H）--B（C₆F₅）₃"三组分复合物之间对应原子间距进行了比较研究，发现这种以水介导的相互作用对醛酮的羰基不仅具有质子化的活化作用，而且与硼烷的络合作用也更有利于硅烷作为还原剂在有水条件下使用.所报道的以硅烷作为还原剂，B（C₆F₅）₃催化的醛酮直接还原成醇反应，首次实现了FLPs在真正有水条件下的催化反应，并更进一步证明了在以硅烷作为还原剂时，体系中存在的水不仅会参与催化反应并会促使反应的进行.对有水条件下FLPs催化的醛酮还原的选择性及其催化反应机理，以及对其他反应的影响还需要更深入的研究.     

新型金属-双二硫杂戊烯(M-BDT)配合物的合成、表征及X射线的指标化

合成了4个新型NiBDT配位化合物,BDT为具有9个S原子的杂戊烯.元素分析、IR谱、UV谱确定这4个新配合物的化学式分别为[(CH₃)₄N]₂[Ni(C₅S₉)₂](1),[(C₂H₅)₄N]₂·[Ni(C₅S₉)₂](2),[(C₄H₉)₄N]₂[Ni(C₅S₉)₂](3),[(C₆H₅)(CH₃)₃N]₂[Ni(C₅S₉)₂](4).采用Ito法对配合物1的X射线粉末图进行了指标化,确定该晶体属单斜晶系,简单晶格,晶胞参数:a=0.680nm,b=0.714nm,c=2.302nm,γ=111.4°,Z=2.     

有机胺盐/硼烷体系与炔烃的硼氢化加成反应机理研究

炔烃的立体选择性硼氢化加成反应是有机合成中重要的反应之一.在硅烷的存在下,有机胺盐酸盐/硼烷体系可与炔烃在温和的反应条件下发生计量的加成反应.该反应不仅可高立体选择性地得到Z-式构型的1,2-硼氢化胺盐加成产物,而且反应产率高,产物易于分离提纯.对有机胺盐酸盐/硼烷体系与炔烃的加成反应机理进行的研究表明,胺盐与B（C₆F₅）₃及硅烷反应所生成的硼氢化胺盐"[R₂NH₂]⁺[H-B（C₆F₅）₃]^-",虽然被认为是受限路易斯酸碱对化学的活性中间体,但其本身并不能直接还原炔烃;炔烃必须首先被催化量的路易斯酸B（C₆F₅）₃活化后才可与[H-B（C₆F₅）₃]-加成.同时,胺盐氯阴离子Cl-与路易斯酸B（C₆F₅）₃之间的弱的相互作用直接决定着产物的立体选择性,[H-B（C₆F₅）₃]^-以反式加成的方式进攻活化后的炔烃最终得到Z-式构型的硼氢化加成产物.     

含全氟烃基的联苯酯类液晶的合成及其介晶性

全氟烃或半氟烃链无手性液晶化合物可能呈现铁电液晶性, 具有较大的学术及应用价值而受到研究人员的重视. 合成了全氟己基苯甲酸联苯酯类液晶化合物: ROC₆H₄C₆H₄O₂CC₆H₄C₆F₁₃ (3a～3e), C₃H₇C₆H₄C₆H₄O₂CC₆H₄C₆F₁₃ (6a)及其烃衍生物. 用差示扫描量热法(DSC)和偏光显微镜(POM)对其介晶性研究发现: 烃衍生物呈有序度较低的向列相, 熔点较高, 清亮点较低, 液晶相较窄. 全氟烃基取代的化合物出现多个有序度较高的近晶相, 熔点较低, 清亮点高, 介晶相温度范围宽.     

中国乌头之研究——Ⅵ.雪上一枝蒿的生物碱(2)

从云南省昭通县产的雪上一枝蒿中共分得生物碱五种,其中三种为已知物,即烏头碱、次岛头碱和一枝蒿乙素,另二种为新生物碱,暂名为一枝蒿戊素和己素。一枝蒿戊素的分子式为C₂₄H₃₉O₆N,其示性式为C₁₉H₂₂(OH)₃(OCH₃)3-(N·C₂H₅);一枝蒿己素的分子式为C₂₄H₃₉O₇N,其示性式为C₁₉H₂₁(OH)₄(OCH₃)₃(N·C₂H₅);另从云南省东川县出产的雪上一枝蒿中,尚分得一新生物碱,暂称为一枝蒿庚素,分子式为C₂₁H₃₁O₃N,其示性式为C₁₉H₂₄(:O)(OH)₂(N·C₂H₅)。     

B(C6 F5)3催化吲哚与苯乙炔的区域选择性加成

使用B（C₆F₅）₃替代稀有金属催化剂,实现了绿色、无毒、温和催化吲哚与苯乙炔的加成反应.对吲哚不同位置带有取代基的底物进行拓展,在室温条件下高产率获得了一系列双吲哚烷烃.对机理的初步探究表明,反应首先从苯乙炔被B（C₆F₅）₃活化开始,而后依次受到两分子吲哚进攻,经马氏加成得到相应产物.根据探究结果,给出了可能的反应机理.     

C59(CHPh2)N的电子结构、UV-Vis光谱、NMR谱及非线性光学性质的理论研究

用INDO系列方法对由(C₅₉N)₂和CH₂Ph₂合成的第一个C₅₉N衍生物C₅₉(CHPh₂)N进行了理论研究,得到了C₅₉(CHPh₂)N的稳定分子构型,表明C₅₉(CHPh₂)N为Cs对称性,并在此基础上讨论了C₅₉(CHPh₂)N的UV-Vis光谱、NMR谱.计算表明C₅₉(CHPh₂)N的二阶非线性光学系数β_μ较大.     

Synthesis, structural characterization and reactivity of the amino borane 1-(NPh2)-2-[B(C6F5)2]C6H4

The bright red title compound 1 was synthesized from (2-lithiophenyl)diphenylamine and bis(pentafluorophenyl)boron chloride. Its reactions with small acids like H₂O and HCl proceeded easily giving zwitterionic compounds. For 1 and its water adduct 2 the crystal structures were determined, the latter featuring an ammonium borate structure containing a short intramolecular hydrogen bond bridge. Treatment of 1 with Jutzi's acid, [H(OEt₂)₂][B(C₆F₅)₄], did not result in protonation of the nitrogen, but reaction of 1 with LiH in the presence of 12-crown-4, led to the isolation of the aminoborate [1-(Ph₂N)-2-{B(H)(C₆F₅)₂}C₆H₄][Li(12-crown-4)] (3). Borohydride 3 reacted with Jutzi's acid to regenerate 1 and liberate hydrogen.     

Measurement of C2F4Cl2, CCl4, CHF3 and O2 by wavelength modulation laser atomic absorption spectroscopy of excited Cl, F and O in a dc discharge applying semiconductor diode lasers

The concentrations of C₂F₄Cl₂ and CCl₄, CHF₃ and C₂F₄Cl₂, and O₂ have been measured in a dc gas discharge by wavelength modulation laser absorption spectroscopy of excited chlorine, fluorine and oxygen, respectively, applying semiconductor diode lasers. Argon and helium at reduced pressure were used as plasma gases. Preliminary 3σ detection limits of 0.6–1.5 ppb for chlorine compounds by absorption of the Cl 837.60 nm line, about 70 ppb of fluorine compounds by the F 739.87 nm line, and about 20 ppb oxygen molecules by the O 777.18 nm line were found.     

可见光诱导烯烃去芳香化成环合成含氟氮杂螺环已二烯酮

发展了一种可见光诱导的N-苄基丙烯酰胺去芳香化成环合成多氟烷基化氮杂螺环已二烯酮的反应。 此反应以多氟烷基碘或溴为自由基源,以fac-Ir(ppy)₃(fac:面式;ppy:2-苯基吡啶)作为光催化剂,在发光二极管(LED)蓝光灯照射条件下,使N-丙烯酰基-N-苄基苯甲酰胺串联自由基加成/去芳香化环合,合成了一系列含氟氮杂螺环已二烯酮类化合物,产率为61%~85%。 值得提出的是,此反应能快速在氮杂螺环已二烯酮骨架上引入多种多氟烷基基团如CF₃I、C₃F₇I、C₄F₉I、C₆F₁₃、C₈F₁₇I、CH₂CF₂I和BrCF₂CO₂Et(Et:乙基)等,且底物适用范围广、反应条件温和(室温)、催化体系绿色,为具有潜在药用价值和生理活性的多氟烷基化氮杂螺环已二烯酮的合成提供了一条高效、快捷的新途径。     

Reaction of octafluorotoluene, 3,5-dichlorotrifluoropyridine, 3-chlorotetrafluoro-yridine and tetrafluoropyrimidine with alkali-metal oximates

Treatment of octafluorotoluene (2) with approximately one-molar equivalents of the oximates R¹R²C = NO~ M⁺ (R¹ = R²=Me;R¹ = R² = Ph; R¹ = Me, R² = Ph;M = Na) (6a-c) in diethyl ether gives 4-(R¹R²C = NO)C₆F₄CF₃ (7a-c) as the only isolated products. Corresponding reaction of 3,5-dichlorotrifluoropyridine (3) with the oximates 6a-c affords 4-and 2-(R¹R²C = NO)C5F₂C12N (8a-c) and (9a-c), respectively (4-/2ratios at −35 °C: 65:35; 30:70; 12:88) ; the lithium oximates (R¹ = R² =Ph ; R¹ = Me, R² = Ph; M = Li) (6d) and (6e) give comparable results. With 3-chlorotetrafluoropyridine (4), treatment with sodium oximate 6c gives 4-(PhCMe = NO)-3-ClC₅F₃N (10) and 2-(PhCMe = NO)-5ClC₅F₃N (11) (ratio 44:56 at −35 °C). Such competition between S_NAr attack of these alkali-metal oximates at the C-4 and C-2 positions of chlorofluoropyridines 3 and 4 can be rationalized by invoking chelation of an alkali-metal cation with ring nitrogen in the transition state leading to formation of an orthio-quinonoidal σ-complex. Exclusive initial attack at the C-4 ring site appears to occur in the reaction of tetrafluoropyrimidine (5) with oximates 6a and 6c to afford 4-(MeC = NO)C₄F₃N₂ (12a) and 4-(PhCMe=NO)C₄F₃NN₂ (12b), respectively; Some further attack on product 12b by oximate 6c at the C-6 site takes place to give the disubstituted derivative 4,6-(PhCMe=NO)₂C₄F₂N₂ (13).     

Reactions of pentafluorophenylxenon(II) hexafluoroarsenate [C6F5Ze] [AsF6] with halide anions in acetonitrile

Reactions of [C₆F₅Xe]⁺ [AsF₆]⁻ in acetonitrile with halide anions X⁻ show different results depending on X. If X = I, Br or Cl, then C₆F₅X is obtained. If X = F, then C₆F₅H and C₆F₅---C₆F₅ are produced, and if X = HF₂, then C₆F₆, C₆F₅H and C₆F₅---C₆F₅ are formed.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

C5~C7烃类组分在Al2O3毛细管色谱柱上的分离及应用

详细研究了54种常见的C₅~C₇烃类组分在S型、KCl型和M型3种类型Al₂O₃毛细管色谱柱上的分离和定性,结果显示大部分C₅~C₇烃类组分在3种类型Al₂O₃毛细管色谱柱上的分离效果良好,但也存在一些组分分离不完全或共流出的现象,3种类型Al₂O₃毛细管色谱柱上的分离效果也存在一定的差异。共测定了15个C₅烃类组分,25个C₆烃类组分及14个C₇烃类组分在这3种类型Al₂O₃毛细管色谱柱上的线性程序升温保留指数,为C₅~C₇烃类组分在Al₂O₃毛细管色谱柱上的定性提供了依据。同时定量分析了某石化企业的裂解气样品中C₅~C₇烃类组分的含量。本研究拓展了Al₂O₃毛细管色谱柱的应用范围,可以为石化企业轻烃的分析提供参考。     

Synthesis, electrochemistry and structural characterization of luminescent rhenium(I) monoynyl complexes and their homo- and hetero-metallic binuclear complexes

A series of luminescent rhenium(I) monoynyl complexes, [Re(N---N)(CO)₃(CC---R)] (N---N=bpy, ^tBu₂bpy; R=C₆H₅, C₆H₄---Cl-4, C₆H₄---OCH₃-4, C₆H₄---C₈H₁₇-4, C₆H₄---C₆H₅, C₈H₁₇, C₄H₃S, C₄H₂S---C₄H₃S, C₅H₄N), together with their homo- and hetero-metallic binuclear complexes, {Re(N---N)(CO)₃(CC---C₅H₄N)[M]} (N---N=bpy, ^tBu₂bpy; [M]=[Re{(CF₃)₂-bpy}(CO)₃]ClO₄, [Re(NO₂-phen)(CO)₃]ClO₄, W(CO)₅) have been synthesized and their electrochemical and photoluminescence behaviors determined. The structural characterization and electronic structures of selected complexes have also been studied. The luminescence origin of the rhenium(I) alkynyl complexes has been assigned as derived states of a [dπ(Re)→π*(N---N)] metal-to-ligand charge transfer (MLCT) origin mixed with a [π(CCR)→π*(N---N)] ligand-to-ligand charge transfer (LLCT) character. The assignments are further supported by extended Hückel molecular orbital (EHMO) calculations, which show that the LUMO mainly consists of π*(N---N) character while the HOMO is dominated by the antibonding character of the Re---CCR moiety resulted from the overlap of the dπ(Re) and π(CCR) orbitals.     

Synthesis and characterization of hydroxo, pyrazolato and carboxylato derivatives of the PdR(PPh3)moiety (R = C6F5 or C6Cl5)

The hydroxo-complexes [{PdR(PPh₃)(μ-OH)}₂] (R = C₆F₅ or C₆Cl₅) have been obtained by reaction of the corresponding [{PdR(PPh₃)(μ-Cl)}2] complexes with NBu₄OH in acetone. In this solvent, the reaction of the hydroxo-bridged complexes with pyrazole (Hpz) and 3,5-dimethylpyrazole (Hdmpz) in 1:2 molar ratio leads to the formation of the new complexes [{Pd(C₅F₅)(PPh₃)(μ-azolate)}2] and [{Pd(C₆Cl₅)(PPh₃)}₂(μ-OH)(μ-azolate)] (azolate = pz or dmpz). The reaction of the bis(μ-hydroxo) complexes with Hpz and Hdmpz in acetone in 1:1 molar ratio has also been studied, and the resulting product depends on the organic radical (C₆F₅ or C₆Cl₅) as well as the azolate (pz or dmpz). The identity of the isomer obtained has been established in every case by NMR (¹H, ¹⁹F and ³¹P) spectroscopy. The reaction of the bis(μ-hydroxo) complexes with oxalic (H₂Ox) and acetic (HOAc) acids yields the binucle ar complexes [{PdR(PPh₃)}2(μ-Ox)] (R = C₆F₅ or C₆Cl₅) and [{Pd(C₆F₅)(PPh₃)(μ-OAc)}2], respectively. [{Pd(C₆F₅)(PPh₃)(μ-OH)}₂] reacts with PPh₃ in acetone in 1:2 ratio giving the mononuclear complex trans-[Pd(C₆F₅) (OH)(PPh₃)₂], whereas the pentachlorophenylhydroxo complex does not react with PPh₃, even under forcing conditions.