等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

酵母对抑制剂耐受的系统分析

纤维素生产乙醇的关键问题之一是水解产生的抑制性物质对乙醇发酵具有明显的抑制效应,因而引起了国内外研究者的广泛关注.研究发现,在抑制剂存在下,酵母在基因表达水平,蛋白水平和代谢物水平都有相应的耐受响应,且这些响应错综复杂.从系统角度运用组学的方法研究这一体系将有助于全面深入了解酵母的耐受机制.本文综述了系统研究的思路和方法在酵母对抑制剂耐受方面的研究状况;对主要研究手段和成果进行了回顾;并对酵母发酵乙醇系统分析的前景进行了展望.     

Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Polymeric complex micelle loaded with axially substituted silicon(Ⅳ) phthalocyanine

A novel axially substituted silicon(Ⅳ)phthalocyanine,namely di-pyridyloxy axially substituted silicon(Ⅳ)phthalocyanine 2 was synthesized and characterized by UV/vis,IR,elemental analysis,MS as well as ~1H NMR spectroscopy.Hydrophobic 2 was encapsulated by amphiphilic triblock copolymer poly[N~ε-(benzyloxycarbonyl-lysine]-poly(ethylene glycol)-poly[N~ε-(benzyl oxycarbonyl) (PLL(Z)-b-PEG-b-PLL(Z))to form hydrophobic 2-loaded polymeric complex micelle(PIC)(2-loaded PIC).Atom force microscopy(AFM)image showe...     

Synthesis of di-μ-OXO-tetra-（α-pentyloxy） tin（Ⅳ） phthalocyanine

Axially substituted tin phthalocyanines, namely dichloride-tetra-（α-pentyloxy） tin （Ⅳ） phthalocyanine 2, dihydroxy-tetra-（α-pentyloxy） tin （Ⅳ） phthalocyanine 3 and its dimmer di-μ-oxo-tetra-（α-pentyloxy） tin（Ⅳ） phthalocyanine 4 were synthesized. The catalytic effect of H2O-free CaCl2 in quinoline was used for condensation of dihydroxy tin phthalocyanine 3 to the cofacially array dimmer 4. Their structures were characterized by UV-vis, IR, elemental analysis, MS, as well as ^1HNMR spectroscopy.     

Synthesis,structural characterization and solubility of 2-(1-substituted-1,11-undecylidene)-5-arylimino-△~3 -1,3,4-thiadiazolines

A series of novel 2-(1-substituted-1,11-undecylidene)-5-arylimino-△~3-1,3,4-thiadiazolines(4) were synthesized and their structure was characterized by ~1H NMR,~(13)C NMR and elemental analysis.Their solubility in both polar and non-polar solvents is significantly improved owing to the introduction of ethyl or methylthio group at cyclododecyl ring as compared with parent compounds[1,2-(1,11-undecylidene)-5-arylimino-△~3-1,3,4-miadiazolines].However,their fungicidal activity against Rhizoctonia solani is ...     

Synthesis of 6-aryl-3-cinchophenyl-1,2,4-triazolo[3,4-b]-1,3,4-thiadiazoles

In recent years, fused heterocycles have been found to possess many unique properties in synthesis and pharmacology. Especially, 1,2,4-triazolo[3,4-b]-1,3,4-thiadiazoles derivatives have been attracting much attention of chemists and pharmacologists because of their broad-spectrum biological activities such as antibacterial¹, hypotensive and CNS depressant² activities. We have prepared some 3,6-substituted 1,2,4-triazolo[3,4-b]-1,3,4-thiadiazoles and found that these compounds exhibited antimacrobial, insecticidal and promote plant growth.^3-5 Cinchophen had been used widely as medicine in clinic,but has been obsolete in recent years due to its by-effect. In order to seek for other uses of cinchophen, as a continuation of our preceeding studies, we used cinchophen as the starting material to synthesize ten new 6-aryl-3-cinchophenyl-l,2,4-triazolo[3,4-b]-l,3,4-thiadiazoles 5a-j. Compound 1 was prepared by the reaction of cinchophen and ethanol in the presence of sulfuric acid. 1 then reacted with hydrazine hydrate in absolute ethanol to give 2 which yielded 3 on treatment with CS₂ and KOH. On refluxing of 3 with excess hydrazine hydrate, 4 was obtained. 4 reacted with various substituted benzoic acids in the presence of POCl₃ to afifort 5a-j.     

On the thermal behaviour of palladium (II) macrocyclic polycatenars

Polycatenar saturated macrocycles 1,10-bis[3,4,5-tris(4-dodecyloxy)benzoy1]-1,10-diaza-4,7,13,16-tetrathiacyclo-octadecane (3b) and 1,10-bis[3,4-bis(4-dodecyloxy)benzoy1] -1,10-diaza-4,7,13,16-tetrathiacyclo-octadecane (3d) reacted with [Pd(MeCN)₄][BF₄]₂ led to the cationic complexes [4b][BF₄]₂ and [4d][BF₄]₂, respectively. Complexes [4b][BF₄]₂ and [4d][BF₄]₂ showed smectic mesomorphism on heating as confirmed by small angle X-ray diffraction. A concurrent, irreversible structural change of the complex cations was observed and a tentative explanation is suggested.     

Preparation of a discotic 2,4,7,9-tetraaryl-6H-dibenzo[c,e][1,2]thiazine and generation of a persistent Radical 1

6H-Dibenzo[d,e][1,2]thiazine substituted with four 3,4-dioctyloxyphenyl groups forms a room temperature discotic phase with a clearing temperature of 104°C. Oxidation of the thiazine 2b with either metal oxides (PbO₂ or AgO) or SO₂Cl₂ gave a moderately stable radical 1b (a _N = 0.95 mT, g = 2.0045). Full conversion of 2b to 1b was observed with AgO in a toluene/MeCN mixture or with SO₂Cl₂. The radical 1b was isolated in the neat form with the latter oxidant. It shows sensitivity to molecular oxygen, which hampered its purification and subsequent thermal and magnetic studies.     

Comparing Singlet Oxygen Generation of Schiff Base Substituted Novel Silicon Phthalocyanines by Sonophotochemical and Photochemical Applications

Although the sonophotodynamic method has an effective therapeutic outcome for anticancer treatment compared with the photodynamic method, there are not enough related studies in the literature and this study aims to contribute to the development of sonophotodynamic studies. For this purpose, the Schiff base substituted silicon phthalocyanines were designed and synthesized as effective sensitizer candidates and the photophysicochemical and sonophotochemical features of the phthalocyanines were examined to increase singlet oxygen efficiency. The calculated Φ_Δ values indicate that the contribution of substituent groups improved the production of singlet oxygen compared with silicon (IV) phthalocyanine dichloride (SiPcCI₂) and also the sonophotochemical applications increased the singlet oxygen yields. The Φ_Δ values (Φ_Δ = 0.76 for axially bis-{4-[(E)-(pyridin-3-ylimino)methyl]phenol} substituted silicon (IV) phthalocyanine ( 2a ), 0.68 for axially bis-4-[(E)-{[(pyridin-3-yl)methyl]imino}methyl]phenol substituted silicon (IV) phthalocyanine ( 2b ) in photochemical study) reached to Φ_Δ = 0.98 for 2a , 0.94 for 2b in sonophotochemical study. This article will enrich the literature on increasing singlet oxygen yield.     

Two Zinc(Ⅱ) Complexes Based on 7rany-(1R,2R)-cyclohexanediamine: Molecular Structure Analyses and Preparation of Composite Membrane

Two novel complexes Zn2(chda)2(TPA)Cl2(1) and [Zn(chda)2(H2O)2](TPAXH2O)2(2)[chda is a chiral ligand of trans-(1R,2R)-cyclohexanediamine, H2TPA is terephthalic acid] were synthesized at room temperature. The molecular structures of complexes 1 and 2 were identified by single-crystal X-ray diffraction measurement. The results showed that complex 1 had a binuclear structure, each Zn(Ⅱ) ion was four coordinated by two N atoms of chda, one O atom of TPA and one Cl atom, to construct a distorted tetrahedral geometry. For complex 2, the Zn(Ⅱ) ion was six coordinated by two chda molecules and two water molecules to form a ZnN4O2 octahedral geometry. Complexes 1 and 2 further extended into three-dimensional supramolecular frameworks by hydrogen-bonding interactions. Hirshfeld surface analysis and fingerprint plots were used to further analyze the contribution of diflerent intermolecular interactions. Further, a composite membrane [Zn(chda)2(H2O)2](TPA)(H2O)2/CA was prepared by adding 10%(mass fraction) of complex 2 into cellulose acetate using acetone/chloroform( V:V-1:1) as solvent.     

二-吡啶氧基-轴向取代-四-α-(3-戊氧基)锡(IV)酞菁的合成与表征

以3-硝基邻苯二甲腈为起始原料, 与正戊醇反应合成3-戊氧基邻苯二甲腈(1), 然后在高温溶剂1-氯萘中经缩聚反应合成二氯-轴向取代-四-α-(3-戊氧基)锡酞菁(2), 2进一步与2-羟基吡啶在N,N-二甲基甲酰胺中合成二-吡啶氧基-轴向取代-四-α-(3-戊氧基)锡酞菁配合物3, 同时对相关化合物分别进行了元素分析, IR, ¹H NMR, UV/Vis, 荧光和质谱表征.     

Evaluation of carborane-containing nematic liquid crystals for electro-optical applications

Three new structurally similar compounds in series 1[2] and 2 containing 12- and 10-vertex p-carborane units (A and B) were prepared. Their thermal properties were investigated in the pure state and compared to those of their carbocyclic analogues. Using several higher homologues in the series 1[n], clearing temperatures for the unknown 1[4] and 1[10] were predicted. Optical, dielectric and rotational viscosity parameters for carborane derivatives 1[2] and 2 and their cyclohexane analogies were obtained by extrapolation of values measured for 10% solutions in a standard nematic host. The observed trends were rationalised using computed molecular parameters.