Rapid adsorption and entrapment of benzoic acid molecules onto mesoporous silica (FSM-16)

Changes in the molecular state of benzoic acid (BA) in the presence of folded sheet mesoporous material (FSM-16), which has uniformly sized cylindrical mesopores and a large surface area, were assessed with several analyses. When BA was blended with FSM-16 for 5 min (BA content=30%), the X-ray diffraction peaks of BA crystals disappeared, suggesting an amorphous state. Fluorescence analysis of the mixture showed a new fluorescence emission peak for BA at 386 nm after mixing with FSM-16. Fluorescence lifetime analysis of the BA component in the mixture at 386 nm showed a longer lifetime in comparison with that of BA crystals. The solid-state (13)C CP/MAS and PST/MAS NMR spectra of the mixture with FSM-16 showed a significantly different spectral pattern from the mixture with nonporous glass, whose NMR spectra were identical to those of BA crystals. These results indicate that BA molecules disperse quickly into the hexagonal channels of FSM-16 by a simple blending procedure and adsorbed BA molecules had clearly different physicochemical properties to BA crystals.     

Liquid crystal phases generated by supramolecular self-assembly of biforked amphiphilic imidazoles

Functional groups with the capability of hydrogen bonding are widely used in the molecular design and preparation of liquid crystalline supramolecular systems, a rapidly growing area of materials showing a high sensitivity towards external stimuli. A series of novel imidazole-containing Schiff's bases replenishing the family of supramolecular liquid crystals has been synthesised and characterised by proton nuclear magnetic resonance, Fourier transform infrared, and ultraviolet–visible spectroscopy, and elemental analyses. Variation of lengths of the terminal alkyl substituents in the obtained amphiphilic imidazoles within 6, 8, 10, 12, 14 and 16 carbon atoms leads to significant changes in their thermal behaviour, micro-segregation and supramolecular self-assembly. Lower homologues were non-mesomorphic, while intermediate members of the homologous series exhibited monotropic bilayered smectic and columnar mesophases. A higher homologue with 16 carbon atoms has an increased trend towards crystallisation of the aliphatic chains and did not exhibit mesomorphism again. The liquid crystalline mesophases were identified and investigated by polarised optical microscopy, differential scanning calorimetry, X-ray diffraction and thermal emission microscopy methods. According to X-ray diffraction characteristics, the smectic mesophase has a bilayered structure where the hydrophilic imidazole groups form a continuous hydrogen bonded network. The interface curvature created by the second alkyl chain leads to the appearance of columnar nanostructures in homologues with 12 and 14 aliphatic carbon atoms.     

Polymorphism-dependent fluorescence of 9,10-bis(pentafluorobenzoyloxy)anthracene

Anthracene derivatives possessing pentafluorobenzoyloxy moieties at 9- and 10-positions showed polymorphism affording two types of fluorescent crystals with blue and bluish green fluorescence in their crystalline state, respectively. Their single crystal X-ray structures showed that the degree of overlap of anthracene moieties was responsible for the difference in fluorescence. Fluorescence in the crystalline state originated in the dimer emission deduced from their excitation spectra.     

Engineering solid-state morphologies in carbazole-ethynylene macrocycles

We present a crystallographic study that systematically investigates the effects of the n-alkyl side-chain length on the crystal packing in shape-persistent macrocycles. The solid-state packing of carbazole-ethynylene-containing macrocycles is sensitive to the alkyl-chain length. In macrocycles containing n-alkyl side chains up to nine carbons in length, face-on aromatic π interactions predominate, while the addition of one carbon leads to a completely different packing arrangement. Macrocycles with C(10) or C(11) chains exhibit a novel packing motif wherein the alkyl chains intercalate between macrocycles, leading in one case to continuous solvent-filled channels. When crystals of the C(10) macrocycle are bathed in solvent, the included molecules exchange with the external solvent, and the alkyl chain disorder changes in response to changes in the guest volume in order to retain crystallinity. Powder X-ray diffraction data indicate that alkyl-macrocycle interactions in the longer chains "emulate" the distances typical of face-to-face π interactions, leading to deceptive indicators of π stacking.     

Heterocyclic quinol-type fluorophores: synthesis, X-ray crystal structures, and solid-state photophysical properties of novel 5-hydroxy-5-substituent-benzo[b]naphtho[1,2-d]furan-6-one and 3-hydroxy-3-substituent-benzo[kl]xanthen-2-one derivatives

Novel heterocyclic quinol-type fluorophores (4 a-c) and (5 a-c) that contain substituents (R = Me, Bu, Ph) with nonconjugated linkages to the chromophore skeleton have been synthesized and their photophysical properties have been investigated in solution and in the solid state. Considerable differences in the absorption and fluorescence spectra were observed between the two states. Quinols 4 a-c and 5 a-c exhibited almost the same absorption and fluorescence spectra in solution; however, their solid-state fluorescence excitation and emission spectra in the crystalline state were quite different. We performed X-ray crystallographic analyses to elucidate the dramatic effect of the substituents of the nonconjugated linkage on the solid-state fluorescence excitation and emission spectra. The relationships between the solid-state photophysical properties and the chemical and crystal structures of 4 a-c and 5 a-c are discussed on the basis of the X-ray crystal structures.     

Imidazolium camphorsulfonamides: chiral catanionic liquid crystals with tunable thermal properties

We report the synthesis of novel chiral catanionic liquid crystals bearing camphorsulfonamide substructures. The phase behaviour of these long-chain substituted imidazolium sulphates and sulfonates was investigated using X-ray diffraction (XRD), polarizing optical microscopy (POM) and differential scanning calorimetry (DSC). We observed that the phase behaviour clearly depends on the substitution of both cation and anion. The chiral camphorsulfonamide substructures have an unfavourable influence on the formation of liquid crystalline (LC-) phases. Contrary to N,N'-di-alkyl-imidazolium salts, the formation of LC phases was only observed when both cation and anion are substituted with long alkyl chains (C(12) or C(16)). Furthermore, the phase transition temperatures depend on the chain length of the alkyl groups, as higher phase transition temperatures were observed for compounds bearing longer alkyl chains. However, no macroscopic evidence for the formation of chiral mesophases was obtained.     

Synthesis and thermal behaviour of liquid crystalline pyridinium bromides containing a biphenyl core

A range of new pyridinium bromides was synthesized by the quaternization of different substituted pyridines with a group containing a biphenyl core and alkyl chains of differing lengths. The phase behaviour of the pyridinium bromides was studied by differential scanning calorimetry, polarizing optical microscopy and powder X-ray diffraction. It is shown that pyridinium moieties, linked to a rod-like biphenyl core via an alkyl spacer, can form ionic liquid crystals. Unsubstituted pyridinium groups promote mesomorphism. Liquid crystalline phases are formed only from 2- and 4-ethyl substituted pyridinium groups with sufficiently long alkyl terminal chains and spacers; i.e. decyl chains on both sides of the biphenyl core. Both the substitution pattern at the pyridinium group and the alkyl chain length have an influence on the polymorphism of the smectic phases. 3,5-Dimethyl substitution hinders mesophase formation.     

Synthesis and thermal behaviour of liquid crystalline pyridinium bromides containing a biphenyl core

A range of new pyridinium bromides was synthesized by the quaternization of different substituted pyridines with a group containing a biphenyl core and alkyl chains of differing lengths. The phase behaviour of the pyridinium bromides was studied by differential scanning calorimetry, polarizing optical microscopy and powder X-ray diffraction. It is shown that pyridinium moieties, linked to a rod-like biphenyl core via an alkyl spacer, can form ionic liquid crystals. Unsubstituted pyridinium groups promote mesomorphism. Liquid crystalline phases are formed only from 2- and 4-ethyl substituted pyridinium groups with sufficiently long alkyl terminal chains and spacers; i.e. decyl chains on both sides of the biphenyl core. Both the substitution pattern at the pyridinium group and the alkyl chain length have an influence on the polymorphism of the smectic phases. 3,5-Dimethyl substitution hinders mesophase formation.     

ORDERED STRUCTURAL EVOLUTION AND RELAXATION BEHAVIORS OF A SERIES MICROPHASE SEPARATED “HAIRY-ROD” POLYIMIDES WITH MULTIPLE ALKYL SIDE CHAINS

A series of “hairy-rod” polyimides, BBPA(n), with multiple alkyl side chains was prepared from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-biphenyldiamine substituted in the 2,2′-positions with benzoate, which was substituted in the 3,4,5-positions with ether side chains of varying lengths. The number of the methylene units, n, in these alkyl side chains were in even numbers ranging from 8 to 18. Combining techniques of one-dimensional (1D) and 2D wide angle x-ray diffraction, 1D small angle X-ray scattering, differential scanning calorimetry experiments, it was found that this series of “hairy-rod” polyimides possess a micro-phase separation between the backbones and side chains. This led to the formation of ordered structures in two different length scales, of which both are hexagonal packing: one is attributed to the alkyl side chains on the sub-nanometer scale, and another is for the whole polymer chains on the nanometer scale. The development of the hexagonal structure on the sub-nanometer scale was critically dependent upon the lengths of the alkylside chains. Three relaxation processes were captured by dynamic mechanical analysis, i.e., segmental motion of the backbones, α the melting of the side chain crystals, β1, which exits only for the materials with longer side chains(n=18,16); and the subglass relaxation of side chains, β2- The peak relaxation temperature of the α process decreased with increasing the length of side chains, while the one of the β2 process increased. The activation energy of the α relaxation was relatively independent on the length of side chain, whereas, β2 process showed the increasing of activation energy with increasing the length of side chains.     

Thermotropic phase behaviour of long-chain alkylmaltosides

The thermotropic phase behaviour and phase structure of crystalline and non-crystalline n-tetradecyl-beta-D-maltoside (C14G2) and n-hexadecyl-beta-D-maltoside (C16G2) have been investigated by means of differential scanning calorimetry and X-ray techniques. Upon lyophilisation, both compounds form a solid, lamellar phase comprising disordered head groups and hexagonally packed alkyl chains that are suggested to be tilted and interdigitated. This ordered lamellar phase melts into a metastable lamellar liquid crystal, which re-crystallises to a high-temperature crystalline polymorph comprising interdigitated, non-tilted alkyl chains. Remarkably, the high-temperature polymorph of C14G2 has the same melting point as that of C16G2, namely 105 degrees C for both surfactants. A low-temperature polymorph of anhydrous C14G2 crystallises from water at room temperature, whereas the hemihydrate of C14G2 crystallises at 6 degrees C from water, or from chloroform containing trace water. X-ray data suggest both these crystalline modifications to comprise interdigitated and tilted alkyl chains.     

Synthesis and the effect of alkyl chain length on optoelectronic properties of diarylethene derivatives

Photochromic symmetrical diarylethene derivatives 1a-6a bearing different long alkyl chains at 2-position of thiophene rings have been synthesized and their structures have been determined by single-crystal X-ray diffraction analysis. The effect of alkyl chain length on their optoelectronic properties, such as photochromism in solution as well as in the crystalline phase and electrochemical performance was investigated in detail. These diarylethenes have showed good photochromic behavior both in solution and in the single crystalline phase. Introduction of the long alkyl chains at 2-position of bis(5-formyl-3-thienyl)perfluorocyclopentene increased the absorption coefficients of both open- and closed-ring isomers and induced bathochromic shifts of the maximal wavelength absorption of the closed-ring isomers. The long alkyl chains can also decrease the cyclization/cycloreversion quantum yields and the oxidation potentials. The cyclic voltammetry indicated that the band gap of these diarylethene derivatives was significantly affected by the alkyl chain length.     

Alkyl chains length dependent fluorescence emission and reversible mechanofluorochromism of AIEE-based quinoline derivatives

Five quinoline derivatives containing different alkyl chains (QLACn, n?=?2, 4, 6, 8, 12) were synthesized to investigate the effect of alkyl chains on their photophysical properties. The fluorescent properties of the QLACn were affected by the alkyl chains, which indicated obvious blue-shifting trend and fluorescence emission are alkyl chains length-dependent by grinding-induced spectral shifts (Δλ_MFC). Longer alkyl-length revealed larger Δλ_MFC. Powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) measurements indicated that the transformation between microcrystalline and amorphous states upon external stimuli should be responsible for the observed reversible MFC behavior.     

Solid-state polymerization of oxetanes. II. Investigation of the growth of the polymer phase as related to the mechanism of polymerization

The radiation-induced solid-state polymerization of 3,3-bischloromethyloxetane (BCMO) was investigated by direct observation of the development of the morphology of the growing polymer phase in single crystals of the monomer. Electron microscopy shows that the polymerization gives rise to amorphous polymer in the first step. The polymer forms irregular platelets which aggregate into larger units without reflecting the crystalline order of the monomer. Subsequent to polymerization, the amorphous polymer crystallizes to the β-modification of poly-BCMO. If the partially polymerized crystals are extracted by solvents of the monomer, crystallization of the polymer is enhanced, and morphological artifacts arise which were previously mistaken for the true morphology of the “as polymerized” polymer. The copolymerization behavior of solid solutions of 3-ethyl-3-chloromethyloxetane (ECMO) and BCMO does not differ from the liquid bulk copolymerization with respect to copolymer composition, which is different from the composition of the monomer mixture. It is concluded that the polymer chains grow in noncrystalline zones as in a polymerization in the liquid state by which amorphous polymer is formed. No lattice control was observable in this solid-state polymerization.     

巴比妥酸楔形棒状液晶分子的合成、性质及与三嗪衍生物的氢键识别组装体

合成了一端含巴比妥酸, 另一端含带三条烷基链苯甲酸酯楔形单元, 中间为苯乙烯共轭单元的棒状分子5-{4-[3,4,5-三(十二烷氧基)苯甲酸酯]苯乙烯}-(1H,3H)-2,4,6嘧啶三酮(BA³/12); 采用偏光显微镜(POM)、 示差扫描量热法(DSC)、 X射线衍射(XRD)、 扫描电子显微镜(SEM)、 红外光谱(IR)、 核磁共振波谱(NMR)和荧光光谱等对其进行了表征. 结果表明, BA³/12能自组装形成晶格结构为c2mm的长方柱相液晶; 红外光谱及核磁共振氢谱表征数据初步证实了BA³/12与三嗪化合物6-(5-{4-[3,4-双(十二烷氧基)]苄氧基}苯基)噻吩-2,4-二氨基-1,3,5三嗪(1T²/12)形成的等摩尔氢键复合物BA/T的结构; BA/T不仅具有液晶性质且能形成具有三维网络状结构的超分子凝胶.     

Characterization of 4-chloro-3-nitrobenzophenone crystal grown by Bridgman technique

The large size 12 mm diameter 4-chloro-3-nitrobenzophenone (4C3N) single crystal has been grown by using vertical Bridgman technique. The grown crystal was confirmed by Powder X-ray diffraction analysis. The crystalline perfection of the grown crystal was examined by high-resolution X-ray diffraction study. The cutoff wavelength of the grown crystal was analyzed by optical studies. The thermal property of the grown crystal was studied by thermogravimetric and differential thermal analyses. The fluorescence spectra of grown 4C3N single crystals exhibit emission peak at 575 nm. The microhardness measurements were used to analyze the mechanical property of the grown crystal. The laser-induced surface damage threshold for the grown crystal was measured using Nd:YAG laser.     

Self-assembled multibilayers of europium alkanoates: structure, photophysics, and mesomorphic behavior

A series of europium alkanoates (C(n-1)H(2n-1)CO(2))(3)Eu, (n = 14, 16, 18, 20) have been synthesized and characterized in detail. X-ray diffraction and Fourier transform infrared spectroscopic measurements confirm the multibilayer structure of these homologues. In such bilayers, the europium ionic layers are well separated by the highly ordered alkyl chains which are in an all-trans conformation and perpendicular to both sides of the europium ionic layers. There is a mixed-coordination type of chelating bidentate and bridging bidentate between the carboxylate groups and the europium ions. All samples exhibit characteristic emission of europium, though the luminescent intensity has been partly quenched by the carboxylate groups. Differential scanning calorimetry (DSC) shows multiple melting points for these homologues, and temperature-dependent X-ray diffraction measurements also confirm the existence of the mesophase on heating. This mesophase is not truly liquid crystalline, but is similar to the smectic A phase of organic rodlike molecules. Meanwhile, it seems that with increasing atomic number of lanthanide ions, longer alkyl chains will be required to form such a mesophase for the corresponding lanthanide alkanoates.     

Synthesis and characterization of novel conjugated bisindenocarbazoles

We present the synthesis of five new bisindenocarbazoles with different alkyl substituents. The synthesis starts from 2,7-dibromocarbazole and leads to the bisindenocarbazoles 6-10 in five steps with an overall yield of about 50%. By substitution of the core with different alkyl chains in the last step of the synthesis, the morphology of the bisindenocarbazoles can be varied from crystalline materials to molecular glasses. The bisindenocarbazoles are electrochemically stable and exhibit a strong, saturated blue emission with a quantum yield of 63% in solution.     

New Fluorescence Domain “Excited Multimer” Formed upon Photoexcitation of Continuously Stacked Diaroylmethanatoboron Difluoride Molecules with Fused π‐Orbitals in Crystals

The crystal‐packing structures of seven derivatives of diaroylmethanatoboron difluoride ( 1 a – gBF₂ ) are characterized by no overlap of the π‐conjugated main units of two adjacent molecules (type I), overlap of the benzene ring π‐orbitals of two adjacent molecules (type II), and overlap of the benzene and dihydrodioxaborinine rings π‐orbitals of adjacent molecules (type III). The crystal‐packing structures govern the fluorescence (FL) properties in the crystalline states. The FL domain that is present in type I crystals, in which intermolecular orbital interactions are absent, leads to excited monomer‐like FL properties. In the case of the type II crystals, the presence of intermolecular overlap of the benzene rings π‐orbitals generates new FL domains, referred to as “excited multimers”, which possess allowed S₀–S₁ electronic transitions and, as a result, similar FL lifetimes at longer wavelengths than the FL of the type I crystals. Finally, intermolecular overlap of the benzene and dihydrodioxaborinine ring π‐orbitals in the type III crystals leads to “excited multimer” domains with forbidden S₀–S₁ electronic transitions and longer FL lifetimes at similar wavelengths as that in type I crystals.     

Highly fluorescent crystalline and liquid crystalline columnar phases of pyrene-based structures

A concept for highly ordered solid-state structures with bright fluorescence is proposed: liquid crystals based on tetraethynylpyrene chromophores, where the rigid core is functionalized with flexible, promesogenic alkoxy chains. The synthesis of this novel material is presented. The thermotropic properties are studied by means of differential scanning calorimetry (DSC), cross-polarized optical microscopy (POM), and X-ray diffraction. The mesogen possesses an enantiotropic Col(h) phase over a large temperature range before clearing. The material is highly fluorescent in solution and, most remarkably, in the condensed state, with a broad, strongly red shifted emission. Fluorescence quantum yields (Phi(F)) have been determined to be 70% in dichloromethane solution and 62% in the solid state. Concentration- and temperature-dependent absorption and emission studies as well as quantum-chemical calculations on isolated molecules and dimers are used to clarify the type of intermolecular interactions present as well as their influence on the fluorescence quantum yield and spectral properties of the material. The high luminescence efficiency in the solid state is ascribed to rotated chromophores, leading to an optically allowed lowest optical transition.     

V-shaped crystalline structures of di-n-alkyl esters of phosphoric acid

We prepared crystals of di-n-alkyl esters of phosphoric acid with chain lengths of n = 10, 12, 14, 16, and 18. These were characterized by single-crystal X-ray analysis and differential scanning calorimetry (DSC). It was found that the alkyl chains are in an extended all-trans conformation and aligned close to perpendicular, forming V-shaped molecules. This is in strong contrast to the typical arrangement of the alkyl chains of phospholipids where the two alkyl chains are arranged parallel in the same direction (e.g., tuning fork configuration in bilayers). Additionally, it was found that the arrangement of the V-shaped molecules of the di-n-alkyl esters in neighboring stacks of the lamellar crystals is antiparallel for short chain lengths (n = 10 and 12) and parallel for the longer (n = 14 and 16). DSC reveals that the melting of the crystals increases systematically with increasing chain lengths from 48 to 82 degrees C. The contribution of each methylene group to the melting enthalpy (70-133 kJ/mol) is independent of the chain length (3.9 kJ per mol CH2).