Room‐Temperature Solution‐Processed PbS Quantum Dot Solar Cells

Colloidal quantum dots (CQDs) are attractive absorber materials for high‐efficiency photovoltaics because of their facile solution processing, bandgap tunability due to quantum confinement effect, and multi‐exciton generation. To date, all published performance records for PbS CQDs solar cells have been based on the conventional hot‐injection synthesis method. This method usually requires relatively strict conditions such as high temperature and the utility of expensive source material (pyrophoric bis(trimethylsilyl) sulfide (TMS‐S)), limiting the potential for large‐scale and low‐cost synthesis of PbS CQDs. Here we report a facile room‐temperature synthetic method to produce high‐quality PbS CQDs through inexpensive ionic source materials including Pb(NO₃)₂ and Na₂S in the presence of triethanolamine (TEA) as the stabilizing ligand. The PbS CQDs were successfully prepared with an average particle size of about 5 nm. Solar cells based on the as‐synthesized PbS CQDs show a preliminary power conversion efficiency of 1.82%. This room‐temperature and low‐cost synthesis of PbS CQDs will further benefit the development of solution‐processed CQD solar cells.     

PbS/CdS Core–Shell Quantum Dots Suppress Charge Transfer and Enhance Triplet Transfer

A sub‐monolayer CdS shell on PbS quantum dots (QDs) enhances triplet energy transfer (TET) by suppressing competitive charge transfer from QDs to molecules. The CdS shell increases the linear photon upconversion quantum yield (QY) from 3.5 % for PbS QDs to 5.0 % for PbS/CdS QDs when functionalized with a tetracene acceptor, 5‐CT . While transient absorption spectroscopy reveals that both PbS and PbS/CdS QDs show the formation of the 5‐CT triplet (with rates of 5.91±0.60 ns⁻¹ and 1.03±0.09 ns⁻¹ respectively), ultrafast hole transfer occurs only from PbS QDs to 5‐CT . Although the CdS shell decreases the TET rate, it enhances TET efficiency from 60.3±6.1 % to 71.8±6.2 % by suppressing hole transfer. Furthermore, the CdS shell prolongs the lifetime of the 5‐CT triplet and thus enhances TET from 5‐CT to the rubrene emitter, further bolstering the upconverison QY.     

Two novel branched chain polymeric metal complexes based on Cd(II), Zn(II) with fluorene,thiophene, 8‐hydroxyquinoline,and 1,10‐phenathroline ligand: synthesis,characterization, photovoltaic properties,and their application in DSSCs

Two novel side chain polymeric metal complexes (PFT‐Cd and PFT‐Zn) have been designed, synthesized, and characterized. These polymers were found to be good thermally stable and high glass transitions temperature, which indicate that these polymers could be applied as photovoltaic materials for dye‐sensitized solar cells (DSSCs). The obtained polymers exhibited good photovoltaic property. The DSSCs based on the PFT‐Cd and PFT‐Zn exhibited a maximum solar‐to‐electricity conversion efficiency (η) up to 3.37% (J_sc = 7.27 mA/cm², V_oc = 0.67 V, and FF = 0.69) and 3.01% (V_oc = 0.72 V, J_sc = 6.10 mA/cm², FF = 0.69) under simulated AM 1.5 G solar irradiation (90–95 mW/cm²). The result shows that these novel materials are suitable for the dye‐sensitized solar cells. Copyright © 2011 John Wiley & Sons, Ltd.     

CdSe量子点敏化纳米二氧化钛太阳电池的电化学交流阻抗谱

量子点敏化纳米TiO2太阳电池(QDSSCs)具有诱人的发展前景,但是与传统的染料敏化太阳电池(DSSCs)相比,其目前的光电转换效率还非常低(仅为3%左右).为了寻找QDSSCs光电转换效率低的原因,本文主要采用外加偏压下的交流阻抗谱技术对通常以S2-/S-x离子对为电解质的CdSe胶体量子点敏化纳米TiO2电极的准...     

Efficient All-Perovskite Tandem Solar Cells with Low-Optical-Loss Carbazolyl Interconnecting Layers

Combining wide-band gap (WBG) and narrow-band gap (NBG) perovskites with interconnecting layers (ICLs) to construct monolithic all-perovskite tandem solar cell is an effective way to achieve high power conversion efficiency (PCE). However, optical losses from ICLs need to be further reduced to leverage the full potential of all-perovskite tandem solar cells. Here, metal oxide nanocrystal layers anchored with carbazolyl hole-selective-molecules (CHs), which exhibit much lower optical loss, is employed to replace poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT : PSS) as the hole transporting layers (HTLs) in lead-tin (Pb-Sn) perovskite sub-cells and ICLs in all-perovskite tandem solar cells. Optically transparent indium tin oxide nanocrystals (ITO NCs) layers are employed to enhance anchoring of CHs, while a mixture of two CHs is adopted to tune the surface energy-levels of ITO NCs. The optimized mixed Pb-Sn NBG perovskite solar cells demonstrate a high PCE of 23.2 %, with a high short-circuit current density (J_sc) of 33.5 mA cm⁻². A high PCE of 28.1 % is further obtained in all-perovskite tandem solar cells, with the highest J_sc of 16.7 mA cm⁻² to date. Encapsulated tandem solar cells maintain 90 % of their reference point after 500 h of operation at the maximum power point (MPP) under 1-Sun illumination.     

Ag2S quantum dot-sensitized WO3 photoelectrodes for solar cells

This work investigates the photovoltaic properties of new-architecture Ag₂S quantum dot-sensitized solar cells (QDSCs) fabricated on WO₃ electrodes. Liquid-junction Ag₂S QDSCs were fabricated from QDs synthesized using the successive ionic layer adsorption and reaction process. The optimal QDSC yielded an efficiency η of 0.20 % under a 100-mW/cm² light illumination. Coating the QDSC with a compact layer and a scattering layer improved η to 0.31 % with a short-circuit current density J _sc of 5.81 mA/cm² and an open-circuit voltage V _oc of 0.21 V. η increased to 0.53 % at a reduced 0.1 sun illumination with a J _sc of 1.11 mA/cm². The external quantum efficiency (EQE) spectrum covered the spectral range of 350–900 nm with a maximal EQE of 29 % at λ?=?650 nm. This work demonstrates the feasibility of the new-configuration Ag₂S QDSCs fabricated on WO₃ electrodes.     

Carbon quantum dots-embedded graphitic carbon nitride nanotubes for enhancing the power conversion efficiency of sensitized solar cells

Graphitic carbon nitride (CN) has been widely used as a photocatalyst. Very few researchers have reported the use of CN in quantum dot-sensitized solar cells (QDSCs). In this study, we prepared nitrogen-rich carbon quantum dot (CQD)-embedded CN nanotubes (CCNTs) with freeze-dried urea and CQD precursors. The prepared CCNTs were used as efficient light harvesters in QDSCs for the first time; their use significantly improved the power conversion efficiency (PCE) of the solar cells compared to those of CQD, CN NT, and bulk CN-sensitized solar cells. The CCNT-sensitized solar cell exhibits 1.01% PCE, which is the highest value among carbon-based QDSCs. Moreover, the CCNTs-sensitized device showed superior photostability over those of CQDs-, CN NTs-, and bulk CN-sensitized devices. The improved performance of the CCNT-sensitized solar cell can be attributed to the facilitated photoelectron transport and suppressed charge recombination. The integration of nitrogen-rich CQDs in CCNTs adjusts the band alignment and maximizes the visible light harvest by reducing the energy barriers, which improves the charge collection efficiency of the device.     

Influence of highly efficient PbS counter electrode on photovoltaic performance of CdSe quantum dots-sensitized solar cells

PbS electrode with high catalytic activity to S_n ^2? reduction certificated by the measurements of electrochemical impedance spectroscopy and cyclic voltammetry was prepared by a simple method. The high catalytic activity makes it be a low-cost alternative counter electrode to platinum (Pt) to be used in quantum dots-sensitized solar cells (QDSSCs) based on polysulfide electrolyte. The photovoltaic performance enhancement of the quantum dots (QDs)-sensitized semiconductor thin films due to the PbS counter electrode was evaluated by fabricating QDSSCs based on CdSe QDs-sensitized ZnO (SnO₂) thin film. CdSe QDs-sensitized ZnO thin film has the lower internal total series resistance and electron transmission time, the higher electron lifetime and electron collection efficiency than the CdSe QDs-sensitized SnO₂ thin film. Replacing the Pt counter electrode with the PbS counter electrode leads to more improvement on the short circuit photocurrent density for QDSSC based on the ZnO thin film than the SnO₂ thin film. Therefore, the process to limit the photovoltaic performance of CdSe QDs-sensitized solar cell and the possible way to improve the photovoltaic performance were analyzed.     

CdSe Quantum Dots and N719‐Dye Decorated Hierarchical TiO2 Nanorods for the Construction of Efficient Co‐Sensitized Solar Cells

Three‐dimensional hierarchical TiO₂ nanorods (HTNs) decorated with the N719 dye and 3‐mercaptopropionic or oleic acid capped CdSe quantum dots (QDs) in photoanodes for the construction of TiO₂ nanorod‐based efficient co‐sensitized solar cells are reported. These HTN co‐sensitized solar cells showed a maximum power‐conversion efficiency of 3.93 %, and a higher open‐circuit voltage and fill factor for the photoanode with 3‐mercaptopropionic acid capped CdSe QDs due to the strong electronic interactions between CdSe QDs, N719 dye and HTNs, and the superior light‐harvesting features of the HTNs. An electrochemical impedance analysis indicated that the superior charge‐collection efficiency and electron diffusion length of the CdSe QD‐coated HTNs improved the photovoltaic performance of these HTN co‐sensitized solar cells.     

Long‐Lived Charge Carriers in Mn‐Doped CdS Quantum Dots for Photoelectrochemical Cytosensing

Photoelectrochemical (PEC) biosensing with semiconductor quantum dots (QDs) has received great attention because it integrates the advantages of both photo‐excitation and electrochemical detection. During the photon‐to‐electricity conversion in PEC processes, electron–hole (charge) separation competes with electron–hole recombination, and the net effect essentially determines the performance of PEC biosensors. Herein, we propose a new approach for slowing down electron–hole recombination to increase charge separation efficiency for PEC biosensor development. Through doping with Mn²⁺, a pair of d bands (⁴T₁ and ⁶A₁) is inserted between the conduction and valence bands of CdS QDs, which alters the electron–hole separation and recombination dynamics, allowing the generation of long‐lived charge carriers with ms‐scale lifetime that decay about 10⁴–10⁵‐fold more slowly than in the case of undoped QDs. Photocurrent tests indicated that Mn²⁺ doping resulted in an approximately 80 % increase in photocurrent generation compared with undoped CdS QDs. For application, the Mn‐doped CdS QDs were coated on the surface of a glassy carbon electrode and functionalized with a cell surface carbohydrate‐specific ligand (3‐aminophenylboronic acid). In this way, a sensitive cytosensor for K562 leukemia cells was constructed. Moreover, the sugar‐specific binding property of 3‐aminophenylboronic acid allowed the electrode to serve as a switch for the capture and release of cells. This has been further explored with a view to developing a reusable PEC cytosensing platform.     

Novel Metal Complexes Unit of Phenanthroline Derivative for Being Used as Auxiliary Electron Acceptor in Dye Sensitizer Molecules

Donor-acceptor-π bridge-acceptor (D−A−π−A) motif dyes are promising dye sensitizers in dye-sensitized solar cells (DSSCs). In this study, to strengthen with-drawing electron force of the auxiliary electron acceptors(A) in D−A−π−A motif dye sensitizers, the metal complexes unit is be used as auxiliary electron acceptor(A) instead of organic electron-withdrawing monomer. The four polymeric metal complexes were designed, synthesized, and characterized, which used metal complexes of phenanthroline derivatives as auxiliary acceptors (A), benzodithiophene-dithiophene derivatives (BDTT) as donors (D), and 8-hydroxyquinoline derivatives as π-bridges and acceptors of the dye sensitizers, and have been used for dye sensitizers. Under AM 1.5 G (100 mW cm⁻²), the photovoltaic test results indicated that the short-circuit photocurrent density (J_sc) of the DSSCs based four polymeric metal complexes are 11.26, 13.68, 14.42 and 15.57 mA cm⁻² and power conversion efficiency (PCE) are 5.96 %, 7.83 %, 8.07 %, 9.28 % respectively. Both J_sc and PCE value of the four polymeric metal complexes increased in order. This may be due to the fact that larger radius of metal ion under the same change number can enhance the coordination bond and cause stronger electron-withdrawing ability of auxiliary acceptor and stronger charge-transfer ability between the donor and the acceptor, which results in higher J_sc and higher PCE of the polymeric complex dye sensitizer.     

Synthesis,Spectral, Electrochemical and Photovoltaic Studies of A3B Porphyrinic Dyes having Peripheral Donors

Three new ‘push-pull’ A₃B Zn(II)porphyrin dyes having meso-pyrenyl, carbazolyl and phenothiazine as electron donors ( A ) and phenylcarboxylic acid as acceptor/anchor ( B ) were synthesized and utilized for DSSC application. The spectral and electrochemical redox properties of these new dyes were studied and compared with trans-A₂BC Zn(II) porphyrin dyes under similar experimental conditions. Red-shifted, broadened absorption peaks, lower fluorescence quantum yields, and shortened lifetimes were observed for the A₃B dyes as compared to zinc tetraphenylporphyrin control, ZnTPP. DFT optimized structures suggested effective charge separation related to enhanced charge injection efficiency. Driving force for electron injection (ΔG_inj) and dye regeneration (ΔG_reg) calculated from the spectral and electrochemical studies predicted facile electron injection from excited dye into semiconductor TiO₂ in the constructed solar cells. Phenothiazine appended dye ( KP - TriPTZ - Zn ) showed the highest η value of 7.3 % for PCE with greater J_sc and V_oc values due to its better light harvesting ability and reduced dye aggregation as compared to other dyes. Our studies demonstrate that the dyes having multiple electron-donating groups exhibit higher photon-to-current conversion efficiency.     

Enhancement of photocurrent of polymer‐gelled dye‐sensitized solar cell by incorporation of exfoliated montmorillonite nanoplatelets

Poly(n‐isopropylacrylamide) (PNIPAAm) and its nanocomposite with exfoliated montmorillonite (MMT) were prepared by soap‐free emulsion polymerization and individually applied to gel the electrolyte systems for the dye‐sensitized solar cells (DSSCs). Each exfoliated MMT nanoplatelet had a thickness of ～ 1 nm, carried ～ 1.8 cation/nm², and acted like a two‐dimensional electrolyte. The DSSC with the LiI/I₂/tertiary butylpyridine electrolyte system gelled by this polymer nanocomposite had higher short‐circuit current density (J_sc) compared to that gelled by the neat PNIPAAm. The former has a J_sc of 12.6 mA/cm², an open circuit voltage (V_oc) of 0.73 V, and a fill factor (FF) of 0.59, which harvested 5.4% electricity conversion efficiency (η) under AM 1.5 irradiation at 100 mW/cm², whereas the latter has J_sc = 7.28 mA/cm², V_oc = 0.72 V, FF = 0.60, and η = 3.17%. IPCE of the nanocomposite‐gelled DSSC were also improved. Electrochemical impedance spectroscopy of the DSSCs revealed that the nanocomposite‐gelled electrolytes significantly decreased the impedances in three major electric current paths of DSSCs, that is, the resistance of electrolytes and electric contacts, impedance across the electrolytes/dye‐coated TiO₂ interface, and Nernstian diffusion within the electrolytes. The results were also consistent with the increased molar conductivity of nanocomposite‐gelled electrolytes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 47–53, 2008     

Assessment of Luminescent Downshifting Layers for the Improvement of Light‐Harvesting Efficiency in Dye‐Sensitized Solar Cells

Luminescence downshifting (LDS) of light can be a practical photon management technique to compensate the narrow absorption band of high‐extinction‐coefficient dyes in dye‐sensitized solar cells (DSSCs). Herein, an optical analysis on the loss mechanisms in a reflective LDS (R‐LDS)/DSSC configuration is reported. For squaraine dye (550–700 nm absorption band) and CaAlSiN₃:Eu²⁺ LDS material (550–700 nm emission band), the major loss channels are found to be non‐unity luminescence quantum efficiency (QE) and electrolyte absorption. By using an ideal LDS layer (QE=100 %), a less absorbing electrolyte (Co‐based), and antireflection coatings, approximately 20 % better light harvesting is obtained. If the absorption/emission band of dye/LDS is shifted to 800 nm, a maximal short‐circuit current density (J_sc) of 22.1 mA cm^?2 can be achieved. By putting the LDS layer in front of the DSSC (transmissive mode), more significant loss channels are observed, and hence a lower overall efficiency than the R‐LDS configuration.     

Energy Relay from an Unconventional Yellow Dye to CdS/CdSe Quantum Dots for Enhanced Solar Cell Performance

A new design for a quasi‐solid‐state Forster resonance energy transfer (FRET) enabled solar cell with unattached Lucifer yellow (LY) dye molecules as donors and CdS/CdSe quantum dots (QDs) tethered to titania (TiO₂) as acceptors is presented. The Forster radius is experimentally determined to be 5.29 nm. Sequential energy transfer from the LY dye to the QDs and electron transfer from the QDs to TiO₂ is followed by fluorescence quenching and electron lifetime studies. Cells with a donor–acceptor architecture (TiO₂/CdS/CdSe/ZnS‐LY/S^2?‐multi‐walled carbon nanotubes) show a maximum incident photon‐to‐current conversion efficiency of 53 % at 530 nm. This is the highest efficiency among Ru‐dye free FRET‐enabled quantum dot solar cells (QDSCs), and is much higher than the donor or acceptor‐only cells. The FRET‐enhanced solar cell performance over the majority of the visible spectrum paves the way to harnessing the untapped potential of the LY dye as an energy relay fluorophore for the entire gamut of dye sensitized, organic, or hybrid solar cells.     

Development of a new conjugated polymer containing dialkoxynaphthalene for efficient polymer solar cells and organic thin film transistors

A new semiconducting polymer, poly((5,5‐E‐α‐((2‐thienyl)methylene)‐2‐thiopheneacetonitrile)‐alt‐2,6‐[(1,5‐didecyloxy)naphthalene])) (PBTADN), an alternating copolymer of 2,3‐bis‐(thiophene‐2‐yl)‐acrylronitrile and didecyloxy naphthalene, is synthesized and used as an active material for organic thin film transistors (OTFTs) and organic solar cells. The incorporation of 2,3‐bis‐(thiophene‐2‐yl)‐acrylronitrile as an electron deficient group and didecyloxy naphthalene as an electron rich group resulted in a relatively low bandgap, high charge carrier mobility, and finally good photovoltaic performances of PBTADN solar cells. Because of the excellent miscibility of PBTADN and PC₇₁BM, as confirmed by Grazing Incident X‐ray Scattering (GIXS) measurements and Transmission Electron Microscopy (TEM), homogeneous film morphology was achieved. The maximum power conversion efficiency of the PBTADN:PC₇₁BM solar cell reached 2.9% with a V_oc of 0.88 V, a short circuit current density (J_sc) of 5.6 mA/cm², and a fill factor of 59.1%. The solution processed thin film transistor with PBTADN revealed a highest saturation mobility of 0.025 cm²/Vs with an on/off ratio of 10⁴. The molecular weight dependence of the morphology, charge carrier mobility, and finally the photovoltaic performances were also studied and it was found that high molecular weight PBTADN has better self assembly characteristics, showing enhanced performance. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Application of the Organic Photosensitizers Bearing Two Carboxylic Acid Groups to Dye‐Sensitized Solar Cells

Three electron donor‐?? bridge‐electron acceptor (D‐π‐A) organic dyes bearing two carboxylic acid groups were applied to dye‐sensitized solar cells (DSSC) as sensitizers, in which one triphenylamine or modified triphenylamine and two rhodanine‐3‐acetic acid fragments act as D and A, respectively. It was found that the introduction of t‐butyl or methoxy group in the triphenylamine subunit could lead to more efficient photoinduced intramolecular charge transfer, thus improving the overall photoelectric conversion efficiency of the resultant DSSC. Under global AM 1.5 solar irradiation (73 mW·cm^?2), the dye molecule based on methoxy‐substituted triphenylamine achieved the best photovoltaic performance: a short circuit photocurrent density (J_sc) of 12.63 mA·cm^?2, an open circuit voltage (V_oc) of 0.55 V, a fill factor (FF) of 0.62, corresponding to an overall efficiency (η) of 5.9%.     

Cyclometalated Ruthenium(II) Complexes Featuring Tridentate Click‐Derived Ligands for Dye‐Sensitized Solar Cell Applications

A series of heteroleptic bis(tridentate) Ru^II complexes featuring N^C^N‐cyclometalating ligands is presented. The 1,2,3‐triazole‐containing tridentate ligands are readily functionalized with hydrophobic side chains by means of click chemistry and the corresponding cyclometalated Ru^II complexes are easily synthesized. The performance of these thiocyanate‐free complexes in a dye‐sensitized solar cell was tested and a power conversion efficiency (PCE) of up to 4.0 % (J_sc=8.1 mA cm^?2, V_oc=0.66 V, FF=0.70) was achieved, while the black dye ((NBu₄)₃[Ru(Htctpy)(NCS)₃]; Htctpy=2,2′:6′,2′′‐terpyridine‐4′‐carboxylic acid‐4,4′′‐dicarboxylate) showed 5.2 % (J_sc=10.7 mA cm^?2, V_oc=0.69 V, FF=0.69) under comparable conditions. When co‐adsorbed with chenodeoxycholic acid, the PCE of the best cyclometalated dye could be improved to 4.5 % (J_sc=9.4 mA cm^?2, V_oc=0.65 V, FF=0.70). The PCEs correlate well with the light‐harvesting capabilities of the dyes, while a comparable incident photon‐to‐current efficiency was achieved with the cyclometalated dye and the black dye. Regeneration appeared to be efficient in the parent dye, despite the high energy of the highest occupied molecular orbital. The device performance was investigated in more detail by electrochemical impedance spectroscopy. Ultimately, a promising Ru^II sensitizer platform is presented that features a highly functionalizable “click”‐derived cyclometalating ligand.     

Effect of degradation on electronic properties of polymer solar cells

We present here the effect of degradation on electronic properties of polymer solar cells. Investigations were performed on two types of solar cells based on the bulk‐heterojunction network of poly(3‐hexylthiophene) and phenyl [6,6] C₆₁ butyric acid methyl ester, one with slow degradation whereas other with faster degradation. Samples were prepared in identical conditions with controlled atmosphere, but for faster degradation, one of the samples was exposed to ambient air (rich in O₂ and H₂O molecules) before deposition of top metal electrode. The sample with slow degradation showed linear degradation in short circuit current density (J_sc), whereas the sample with faster degradation exhibited exponential degradation in J_sc. Linear degradation happens due to degradation in the active layer only whereas the exponential degradation is because of through degradation of the solar cell. The effect of degradation is investigated on different diode parameters. Because of different degradation processes in the two samples, the variations in diode parameters with time are different. Copyright © 2013 John Wiley & Sons, Ltd.