Site-Dependent TERS Study of a Porphyrin Molecule on Ag(100) at 7 K

Single-molecule tip-enhanced Raman spectroscopy (TERS) has emerged as an important technique for structural analysis at sub-molecular scale. Here in this work, we report aTERS study of an isolated free-base porphyrin molecule adsorbed on the Ag(100) surface at cryogenic temperature (∽7 K). Site-dependent TERS spectra reveal distinct local vibrational information for the chemical constituents within a single molecule. Moreover, distinct spatial features among di erent Raman peaks can be resolved from the TERS mapping images. These images are found to associate with related vibrational modes, enabling to resolve the mode associated with N-H bonds at the sub-nanometer level. This study will provide deep insights into the symmetry of adsorption con gurations and local vibrational information within a single molecule.     

金与银电极表面甘氨酸分子吸附作用的SERS光谱研究

本文利用表面增强拉曼光谱(SERS)技术研究了甘氨酸在金与银基底表面的吸附作用特征。研究表明甘氨酸分子以COO-的不对称形式吸附于金电极表面,且NH2也是其可能的吸附位点;而在银电极表面,则主要是通过COO-的对称形式而吸附。在此基础上,进一步研究了电极电位与溶液酸碱性对吸附于粗糙化银电极表面甘氨酸分子吸附作用的影响。研究结果表明,甘氨酸分子中去质子化羧基的吸附作用受电位影响较小,而电位对-NH3+吸附作用的影响程度较大。另一方面,溶液pH值对银电极表面的甘氨酸分子吸附行为的影响也较为显著。随着溶液酸性减小羧基倾向于相对于电极表面平行吸附。这是由于随着溶液碱性增大氨基质子化程度的减小,有利于氨基在银电极表面吸附。这将改变分子的吸附构型使其更接近于电极表面。这些变化主要出现在pH值大于10的条件下。     

Expanding generality of surface-enhanced Raman spectroscopy with borrowing SERS activity strategy

Surface-enhanced Raman scattering (SERS) was discovered three decades ago and has gone through a tortuous pathway to develop into a powerful diagnostic technique. Recently, the lack of substrate, surface and molecular generalities of SERS has been circumvented to a large extent by devising and utilizing various nanostructures by many groups including ours. This article aims to present our recent approaches of utilizing the borrowing SERS activity strategy mainly through constructing two types of nanostructures. The first nanostructure is chemically synthesized Au nanoparticles coated with ultra-thin shells (ca. one to ten atomic layers) of various transition metals, e.g., Pt, Pd, Ni and Co, respectively. Boosted by the long-range effect of the enhanced electromagnetic (EM) field generated by the highly SERS-active Au core, the originally low surface enhancement of the transition metal can be substantially improved giving total enhancement factors up to 10(4)-10(5). It allows us to obtain the Raman spectra of surface water, having small Raman cross-section, on several transition metals for the first time. To expand the surface generality of SERS, tip-enhanced Raman spectroscopy (TERS) has been employed. With TERS, a nanogap can be formed controllably between an atomically flat metal surface and the tip with an optimized shape, within which the enhanced EM field from the tip can be coupled (borrowed) effectively. Therefore, one can obtain surface Raman signals (TERS signals) from adsorbed species at Au(110), Au(111) and, more importantly, Pt(l10) surfaces. The enhancement factor achieved on these single crystal surfaces can be up to 106, especially with a very high spatial resolution down to about 14 nm. To fully accomplish the borrowing strategy from different nanostructures and to explain the experimental observations, a three-dimensional finite-difference time-domain method was used to calculate and evaluate the local EM field on the core-shell nanoparticle surfaces and the TERS tips. Finally, prospects and further developments of this valuable strategy are briefly discussed with emphasis on the emerging experimental methodologies.     

Fabrication of a Biocompatible Mica/Gold Surface for Tip-Enhanced Raman Spectroscopy

Tip-enhanced Raman spectroscopy (TERS) is a promising technique for structural studies of biological systems and biomolecules, owing to its ability to provide a chemical fingerprint with sub-diffraction-limit spatial resolution. This application of TERS has thus far been limited, due to difficulties in generating high field enhancements while maintaining biocompatibility. The high sensitivity achievable through TERS arises from the excitation of a localized surface plasmon resonance in a noble metal atomic force microscope (AFM) tip, which in combination with a metallic surface can produce huge enhancements in the local optical field. However, metals have poor biocompatibility, potentially introducing difficulties in characterizing native structure and conformation in biomolecules, whereas biocompatible surfaces have weak optical field enhancements. Herein, a novel, biocompatible, highly enhancing surface is designed and fabricated based on few-monolayer mica flakes, mechanically exfoliated on a metal surface. These surfaces allow the formation of coupled plasmon enhancements for TERS imaging, while maintaining the biocompatibility and atomic flatness of the mica surface for high resolution AFM. The capability of these substrates for TERS is confirmed numerically and experimentally. We demonstrate up to five orders of magnitude improvement in TERS signals over conventional mica surfaces, expanding the sensitivity of TERS to a wide range of non-resonant biomolecules with weak Raman cross-sections. The increase in sensitivity obtained through this approach also enables the collection of nanoscale spectra with short integration times, improving hyperspectral mapping for these applications. These mica/metal surfaces therefore have the potential to revolutionize spectromicroscopy of complex, heterogeneous biological systems such as DNA and protein complexes.     

Tip-enhanced Raman scattering

Tip-enhanced Raman scattering (TERS) is a technique that provides molecular information on the nanometre scale. Using a nanometre-sized metal particle results in a strong signal enhancement and a lateral resolution similar to the dimensions of the particle. As TERS is in a way the ultimate SERS experiment, the theoretical background will be briefly discussed with respect to the unique features and the specific effects that occur when only a single nanoparticle is used as a probe. All the major parts of the instrument will be revealed and the specific advantages of the different instrumental set ups will be investigated with respect to the particular requirements of the sample. Selected examples ranging from material science to cell biological applications demonstrate the capabilities and the potential of TERS in this tutorial review.     

Nanoscale Chemical Imaging of Interfacial Monolayers by Tip‐Enhanced Raman Spectroscopy

We report an investigation of interfacial fluorinated hydrocarbon (carboxylic‐fantrip) monolayers by nanoscale imaging using tip‐enhanced Raman spectroscopy (TERS) and density functional theory (DFT) calculations. By comparing TERS images of a sub‐monolayer prepared by spin‐coating and a π–π‐stacked monolayer on Au(111) in which the molecular orientation is confined, specific Raman peaks shift and line widths narrow in the transferred LB monolayer. Based on DFT calculations that take into account dispersion corrections and surface selection rules, these specific effects are proposed to originate from π–π stacking and molecular orientation restriction. TERS shows the possibility to distinguish between a random and locked orientation with a spatial resolution of less than 10 nm. This work combines experimental TERS imaging with theoretical DFT calculations and opens up the possibility of studying molecular orientations and intermolecular interaction at the nanoscale and molecular level.     

表面增强拉曼光谱:应用和发展

表面增强拉曼光谱技术(Surface-enhanced Raman spectroscopy,SERS)是一种具有超高灵敏度的指纹光谱技术,目前已广泛应用于表面科学、材料科学、生物医学、药物分析、食品安全、环境检测等领域,是一种极具潜力的痕量分析技术。 本文对SERS技术及相关的针尖增强拉曼光谱(Tip-enhanced Raman spectroscopy,TERS),壳层隔绝纳米粒子增强拉曼光谱(Shell-isolated nanoparticle-enhanced Raman spectroscopy,SHINERS)技术的发展及应用进行了综合评述,并探讨了其未来的研究热点及发展方向。     

Electron-enhanced Raman scattering: a history of its discovery and spectroscopic applications to solution and interfacial chemistry

Raman scattering spectroscopy can be used to distinguish highly similar molecules and obtain useful information on local physical and chemical environments at their functional group levels. However, obtaining a high-quality Raman spectrum requires high-power excitation and a long acquisition time owing to the inherently small Raman scattering cross section, which is problematic in the analyses of living cells and real-time environmental monitoring. Herein, a new Raman enhancement technique, electron-enhanced Raman scattering (EERS), is described in which artificially generated electrons affect the polarizability of target molecular systems and enhance their inherent Raman cross sections. The EERS technique stands in contrast to the well-known SERS technique, which requires roughened metal surfaces. The history of EERS and its spectroscopic applications to aqueous solutions are presented.     

DFT vibrational calculations of rhodamine 6G adsorbed on silver: analysis of tip-enhanced Raman spectroscopy

The tip-enhanced near-field Raman (TERS) bands of Rhodamine 6G (R6G), that we reported earlier [Chem. Phys. Lett. 2001, 335, 369.], are assigned on the basis of density-functional theory (DFT) calculations at the 6-311++G(d,p) level. The Raman and infrared intensities as well as frequencies of the vibrational modes are used for band assignments. These vibrational modes, in combination with characterization of resonant electronic transitions using time-dependent DFT calculations, predict spectral changes in resonant Raman and surface-enhanced resonant Raman scatterings of R6G. Moreover, the TERS spectra of R6G are analyzed in detail, where interactions between the tip and R6G molecules and their enhancement mechanisms are discussed. Finally, we propose a novel Raman spectroscopy technique capable of detecting molecular vibrations at sub-nanometer scale.     

Towards chemical analysis of nanostructures in biofilms II: tip-enhanced Raman spectroscopy of alginates

This study examines the feasibility of using tip-enhanced Raman spectroscopy (TERS) for label-free chemical characterization of nanostructures in biological systems. For this purpose, a well-defined model system consisting of calcium alginate fibers is studied. In a companion paper, calcium alginate fibers and their network structures were shown to be a good model for the extracellular polysaccharides of biofilms at the nanoscale. TERS analysis of biological macromolecules, such as alginates, is complicated by heterogeneity in their sequence, molecular weight, and conformations, their small Raman cross-section, and the large number of functional groups, which can chemically interact with the silver surface of the tip and cause significant band shifts. Due to these effects, Raman frequencies in TERS spectra of biopolymers do not necessarily resemble band positions in the normal Raman spectrum of the bulk material, as is the case for less complex samples (e.g., dye molecules) studied so far. Additionally, analyte decomposition due to laser heating can have a significant influence, and carbon contamination signals can sometimes even overwhelm the weak analyte signals. Based on the investigation of alginates, strategies for spectra correction, choice of appropriate reference samples, and data interpretation are presented. With this approach, characteristic frequency ranges and specific marker bands can be found for biological macromolecules that can be employed for their identification in complex environments. Figure TERS spectrum of a calcium alginate fiber bundle     

Fast Fabrication and Judgement of Tip-Enhanced Raman Spectroscopy-Active Tips

The quality of the scanning tip is crucial for tip-enhanced Raman spectroscopy (TERS) experiments towards large signal enhancement and high spatial resolution. In this work, we report a controllable fabrication method to prepare TERS-active tips by modifying the tip apex at the atomic scale, and propose two important criteria to in-situ judge the tip's TERS activity for tip-enhanced Raman measurements. One criterion is based on the downshift of the first image potential state to monitor the coupling between the far-field incident laser and near-field plasmon; the other is based on the appearance of the low-wavenumber Raman peaks associated with an atomistic protrusion at the tip apex to judge the coupling efficiency of emissions from the near field to the far field. This work provides an effective method to quickly fabricate and judge TERS-active tips before real TERS experiments on target molecules and other materials, which is believed to be instrumental for the development of TERS and other tip-enhanced spectroscopic techniques.     

Adsorption of organic molecules on rutile TiO2 and anatase TiO2 single crystal surfaces

The interaction of organic molecules with titanium dioxide surfaces has been the subject of many studies over the last few decades. Numerous surface science techniques have been utilised to understand the often complex nature of these systems. The reasons for studying these systems are hugely diverse given that titanium dioxide has many technological and medical applications. Although surface science experiments investigating the adsorption of organic molecules on titanium dioxide surfaces is not a new area of research, the field continues to change and evolve as new potential applications are discovered and new techniques to study the systems are developed. This tutorial review aims to update previous reviews on the subject. It describes experimental and theoretical work on the adsorption of carboxylic acids, dye molecules, amino acids, alcohols, catechols and nitrogen containing compounds on single crystal TiO(2) surfaces.     

Electrochemical TERS Elucidates Potential‐Induced Molecular Reorientation of Adenine/Au(111)

Electrochemical surface activity arises from the interaction and geometric arrangement of molecules at electrified interfaces. We present a novel electrochemical tip‐enhanced Raman spectroscope that can access the vibrational fingerprint of less than 100 small, non‐resonant molecules adsorbed at atomically flat Au electrodes to study their adsorption geometry and chemical reactivity as a function of the applied potential. Combining experimental and simulation data for adenine/Au(111), we conclude that protonated physisorbed adenine adopts a tilted orientation at low potentials, whereas it is vertically adsorbed around the potential of zero charge. Further potential increase induces adenine deprotonation and reorientation to a planar configuration. The extension of EC‐TERS to the study of adsorbate reorientation significantly broadens the applicability of this advanced spectroelectrochemical tool for the nanoscale characterization of a full range of electrochemical interfaces.     

Surface bonding on silicon surfaces as probed by tip-enhanced Raman spectroscopy

Tip-enhanced Raman spectroscopy (TERS) has been used to obtain the Raman signal of surface species on silicon single crystal surfaces without the necessity for surface enhancement by addition of Ag nanoparticles. By illuminating the hydrogen terminated silicon surface covered with a droplet of 4-vinylpyridine with UV light, a 4-ethylpyridine modified silicon surface can be easily obtained. By bringing a scanning tunneling microscope (STM) Au tip with a nanoscale tip apex to a distance of ca. 1 nm from the m...     

Characterization of enantiospecific chemisorption on chiral Cu surfaces vicinal to Cu(111) and Cu(100) using density functional theory

Surfaces of simple fcc metals such as Cu with nonzero and unequal Miller indices are intrinsically chiral. Density functional theory (DFT) calculations are a useful way to study the enantiospecific adsorption of small chiral molecules on these chiral metal surfaces. We report DFT calculations of seven chiral molecules on several structurally distinct chiral Cu surfaces. These surfaces include two surfaces with (111)-oriented terraces and one with (100)-oriented terraces. Calculations are also described on a surface that was modified to mimic the surface structures that typically appear on real metal surfaces following thermally driven fluctuations in step edges. Our results provide initial information on how variation in the surface structure of intrinsically chiral metal surfaces can affect the enantiospecific adsorption of small molecules on these surfaces.     

放射性碘分子在Cu2O表面的吸附:第一性原理密度泛函研究

采用第一性原理密度泛函计算方法和周期性平板模型系统研究了放射性碘分子在Cu₂O三个低指数表面的吸附行为。通过计算若干平衡吸附构型的结构参数和吸附能评估了不同特征吸附位的作用。构型优化计算表明所选晶面存在适度的结构弛豫。计算结果表明,与Cu₂O（110）表面相比,Cu₂O（100）和（111）晶面表现出更高的碘分子吸附反应活性。其中,表面氧原子位（O_S）和配位未饱和铜原子位（Cu_CUS）分别为Cu₂O（100）和（111）晶面的能量最优吸附位点。此外,针对几种典型吸附结构计算分析了其电子结构信息,以进一步阐明吸附体系之间的相互作用机理。     

Nanoscale Chemical Imaging Using Tip‐Enhanced Raman Spectroscopy: A Critical Review

Methods for chemical analysis at the nanometer scale are crucial for understanding and characterizing nanostructures of modern materials and biological systems. Tip‐enhanced Raman spectroscopy (TERS) combines the chemical information provided by Raman spectroscopy with the signal enhancement known from surface‐enhanced Raman scattering (SERS) and the high spatial resolution of atomic force microscopy (AFM) or scanning tunneling microscopy (STM). A metallic or metallized tip is illuminated by a focused laser beam and the resulting strongly enhanced electromagnetic field at the tip apex acts as a highly confined light source for Raman spectroscopic measurements. This Review focuses on the prerequisites for the efficient coupling of light to the tip as well as the shortcomings and pitfalls that have to be considered for TERS imaging, a fascinating but still challenging way to look at the nanoworld. Finally, examples from recent publications have been selected to demonstrate the potential of this technique for chemical imaging with a spatial resolution of approximately 10 nm and sensitivity down to the single‐molecule level for applications ranging from materials sciences to life sciences.     

Multiple Ionic-Covalent Couplings in Molecules and Clusters

The electronic states of molecules made of electropositive and electronegative components result from the interference between the covalent configurations and the ionic configurations. This work shows complex aspects of these ionic-covalent couplings in small molecules such as Li2H, Li2F, and Li4F. The extension of this type of analysis to the adsorption of the electrophilic molecules on the metal clusters or on the metal surfaces is supposed to lead to a radically new interpretation of the observed physical and chemical properties.     

Reflection–absorption IR and surface-enhanced IR spectroscopy of tetracarboethoxy t-butyl-calix[4]arene,as a host molecule with potential applications in sensor devices

A vibrational study of the calix[4]arene derivative 25,26,27,28-tetracarboethoxy-p-tert-butylcalix[4]arene (TCEC) is accomplished in this work. This characterization implies a study of its adsorption on metal (Cu and Ag) films by reflection–absorption IR spectroscopy (RAIRS) and surface-enhanced IR (SEIR) in transmission and reflection–absorption configurations. Metal surfaces for SEIR were obtained by a simple direct immobilization on Ge of Ag nanoparticles suspended in water. The goal of this research was an accurate vibrational characterization of the above calixarene molecule, paying special attention in the structural marker bands of ester groups, which play an important role in the molecular adsorption on such metals. The information derived from this study will serve to better understand the interaction of ester-functionalised calixarenes with these metals, in order to prepare sensor films with selective affinity towards polycyclic aromatic hydrocarbons (PAHs). The application of these surface techniques confirmed the importance of the ester groups in the immobilization and self-assembly of these host molecules to the metal surface and provided information about the orientation adopted by TCEC on the metal.