蒽在SDS/BA/H2O体系中的光谱特征

用紫外-可见吸收光谱和荧光发射光谱研究了蒽在不同组成和结构的十二烷基硫酸钠(SDS)/苯甲醇(BA)/H20微乳液中的光谱特征,探讨了微乳液组成和结构对蒽光谱特征的影响,阐述了蒽在微乳液中的定位。结果表明,蒽位于O/W微乳液的膜相和油核;在SDS/BA/H2O W/O微乳液中,蒽定位于油连续相。     

吩噻嗪在十二烷基硫酸钠/苯甲醇/水微乳液中的定位

采用循环伏安法和荧光猝灭法研究了吩噻嗪（PTZ）在十二烷基硫酸钠（SDS）/苯甲醇（BA ）/ 水（H2O）微乳液中的定位.结果表明,吩噻嗪在十二烷基硫酸钠/苯甲醇/水体系微乳液中位于微乳液膜相中靠近表面活性剂极性头基的一侧,PTZ分子中的S原子和N原子均可朝向表面活性剂的极性头基.     

Triton X-100/[bmim][PF6]/水离子液体微乳液增敏荧光猝灭法测定钨（Ⅵ）

本文报道了Triton X-100(辛基苯基聚氧乙烯醚)/[bmim][PF6](1-丁基-3-甲基咪唑六氟磷酸盐)/水离子液体微乳液(Triton X-100/[bmim][PF6]-M)增敏荧光猝灭法测定W(Ⅵ)。该体系λex=616nm,λem=690,W(Ⅵ)含量在0.2～10.0μg/mL范围内与其荧光猝灭值(△F)符合线性关系,相关系数r=0.9984,方法检出限为0.07μg/mL。同时以荧光剂亚甲基蓝在不同介质中的荧光量子产率初步探讨了离子液体微乳液的增敏机理。该方法可用于矿样中钨含量的测定。     

SDS/苯甲醇/H2O体系的相行为与结构

SDS／苯甲醇／H2O体系能生成胶束、微乳液、层状液晶、六角状液晶等分子有序组合作，它们之间转换关系可以从凝聚能理论得到解释．来甲酸在O／W微乳液中的分配系数K＝168，表明绝大多数苯甲醇被增溶于SDS胶束相内．随重量比本甲醇／SDS增加，层状液晶中的do值几乎不变，溶剂渗透率略有增加，六角状液晶中圆柱缔合体的半径r值几乎不变，溶剂渗透率增加．     

乳液静电纺丝PLA/PEG微纳纤维膜的可控制备及负载亲疏水性药物的释放

采用低能相反转法,以聚乳酸(PLA)、疏水性药物喜树碱(CPT)溶液为油(O)相,以明胶水溶液、亲水性药物黄芪多糖(APS)为水(W)相,制备水包油(O/W)初乳液.通过控制聚乙二醇(PEG)的浓度和分子量制备O/W纺丝液,经乳液静电纺丝获得PLA/PEG微纳纤维膜.采用粒径分布、光学显微镜(OM)、扫描电子显微镜(SEM)、红外光谱(FTIR)、X射线衍射(XRD)、接触角测试和细胞毒性实验对初乳液和PLA/PEG微纳纤维膜进行表征,并通过激光共聚焦显微镜(CLSM)观察药物的分布情况.结果表明,通过乳液静电纺丝可成功制备亲水性良好的不同微纳结构的PLA/PEG微纳纤维膜.PLA/PEG微纳纤维膜形貌不同,亲水性存在差异,无细胞毒性.体外药物释放结果表明,与pH=6.8和7.4的释放介质相比,在pH=5.8的释放介质中,药物累积释放率较高,表明载药PLA/PEG微纳纤维膜能够有效减缓CPT的释放,而APS释放速率较快,可实现亲疏水性药物的差别性释放.     

卤代荧光素荧光猝灭法测定肾上腺色腙

在pH=6.6 的缓冲介质中, 肾上腺色腙(CBZC)与二氯荧光素(DCF)、二溴荧光素(DBF) 和二碘荧光素(DIF)通过静电引力、芳基堆积作用和范德华力形成摩尔比为2: 1的复合物, 引起上述二卤代荧光素的荧光发生猝灭, 最大猝灭波长分别位于533, 536和560 nm. 其荧光猝灭值(ΔF)在一定范围内与肾上腺色腙浓度成正比, 荧光猝灭反应具有较高的灵敏度, 对CBZC的检出限分别为3.3 ng/mL(CBZC-DCF体系), 5.7 ng/mL(CBZC-DBF体系)和129.6 ng/mL(CBZC-DIF体系). 考察了共存物质的影响、荧光猝灭反应的适宜条件和影响因素, 结果表明, 该方法具有良好的选择性, 可用于CBZC的血药和尿药浓度的快速检测. 从温度的影响、荧光寿命以及Stern-Volmer图判断该反应为静态猝灭反应.     

DEA与SDS/n-C5H11OH/H2O微乳液的相互作用

以循环伏安法研究了N,N-二乙基苯胺（DEA）与十二烷基硫酸钠（SDS）/正戊醇（n-C5H11OH）/H2O体系O/W和W/O结构微乳液的相互作用.结果表明,DEA在SDS/n-C5H11OH/H2O体系微乳液中有两种定位方式:其一,DEA分子在微乳液液滴膜相中定位于表面活性剂和助表面活性剂的极性基团附近;其二,DEA分子在微乳液液滴膜相中定位于表面活性剂疏水基团一侧.两种定位的分布与微乳液的结构和组成相关.     

基于苯炔苯及荧光探针芘自组装单分子膜的制备及苯胺检测

利用重氮基的光分解活性、采用自组装的方法将带有功能基团NH₂ 的4-(4-氨基苯乙炔基)苯共价键接在石英基片上制备了共轭单分子膜; 利用膜上NH₂ 的反应活性, 通过酰胺化反应或自组装的方式将稠环芘修饰在单分子膜上,构筑了含有芘荧光探针的稳定发光超薄膜; 该薄膜能够与电子受体硝基苯胺间因相互作用形成电荷转移络合物而使其荧光猝灭, 并且该薄膜对硝基苯胺同分异构体的荧光猝灭响应有明显的差异, 其中对硝基苯胺对功能薄膜的猝灭效应最为明显, 其次是邻硝基苯胺和间硝基苯胺; 且具有明显的浓度依赖性.     

新型无表面活性剂微乳液体系：乙醇/呋喃甲醛/水

通常, 微乳液一般由四个组分构成：水相、油相、表面活性剂和助表面活性剂。本文报道了一种不含表面活性剂的微乳液体系(简称SFME),由呋喃甲醛(油相),水和乙醇三组分构成,不含传统的表面活性剂。对其相行为进行了研究,发现存在一个单相微乳液区和一个两相平衡区。采用电导率法和冷冻蚀刻电镜(FF-TEM)考察了单相区域中微乳液的微结构,结果表明可分为油包水(O/W)、双连续(BC)和水包油(W/O)三个区域。液滴直径介于30~80nm。     

无表面活性剂微乳液体系：N,N－二甲基甲酰胺/呋喃甲醛/水

通常微乳液一般由四个组分构成：水相、油相、表面活性剂和助表面活性剂。本文报道了一种不含表面活性剂的微乳液体系(简称SFME),由呋喃甲醛(油相),水和N,N－二甲基甲酰胺(DMF)三组分构成,不含传统的表面活性剂。对其相行为进行了研究,发现存在一个单相微乳液区和一个两相平衡区。采用电导率法和冷冻蚀刻电镜(FF-TEM)考察了单相区域中微乳液的微结构,结果表明可分为油包水(O/W)、双连续(BC)和水包油(W/O)三个区域。液滴直径介于40-70nm。     

Fluorescence Quenching of Anthracene by N,N-Diethylaniline and Phenothiazine in Triton X-100/n-C10H21OH/H2O Microemulsion

IntroductionDuring the last decade,microemulsions haveplayed important roles in the development of bio-logical,material,environmental and other relatedfields[1— 4] .Although photo- induced electron trans-fer processes are of considerable interest in biologyand chemistry,up to now,most of the studies ofthe photo- induced electron transfer in micelle andinverse micelle have been limited to one- or two-component water/surfactant systems[5] .As theirextensions to microemulsion,only a very limited…     

Spectroscopy characterization of anthracene in SDS/BA/H2O system

Spectroscopy characterization of anthracene in sodium dodecyl sulfate (SDS)/benzyl alcohol (BA)/water (H(2)O) microemulsion was studied by UV-visible absorption and fluorescence emission spectroscopy. The impact of the composition and structure of the microemulsion on spectroscopy characterization of anthracene were discussed. At the same time, we indicated the location of anthracene in microemulsion. The results indicated that in O/W microemulsion in SDS/BA/H(2)O system, anthracene exists both in the membrane phase and oil core, while in W/O microemulsion, anthracene exists in the oil continuous phase.     

Fluorescence Quenching of Anthracene by N,N-Diethylaniline and Phenothiazine in CTAB/n-C5H11OH/H2O Microemulsion

Photoinduced electron transfer reactions of anthracene with N,N-diethylaniline (DEA) and phenothiazine (PTZ) occurred in the membrane phase of the CTAB (hexadecyltrimethylammonium bromide)/n-C₅H₁₁OH (1-pentanol)/H₂O micro-emulsion. DEA and PTZ exist in the membrane phase of the microemulsion because the presence of vitamin-C (Vc) can change the quenching constant. The change of the quenching constant for the DEA–anthracene system with the presence of Vc is more obvious than that for the PTZ–anthracene system. Thus, the DEA molecules are much closer to the polar head of the microemulsion than PTZ. Compared with DEA, the distribution of PTZ in the microemulsion tends to follow Poisson statistics.     

Microenvironment Effect on the Location Distribution of Phenothiazine in Cetyltrimethylammonium Bromide/<Emphasis Type="Italic">n</Emphasis>-Pentanol/H<Subscript>2</Subscript>O W/O and Bi-continuous Microemulsions

In cetyltrimethylammonium/n-pentanol/H₂O W/O (W/O = water in oil microemulsion) mixtures and bi-continuous microemulsions, phenothiazine (PTZ) molecules exist in the membrane phase of the dispersion either with the N atom or with the S atom pointed toward the polar head of cetyltrimethylammonium (CTAB). Cyclic voltammetry has been used to investigate the effects of the compositions and structures of the microemulsions, pH, and the salt on the location distribution of PTZ in the membrane phase of the dispersion in CTAB/n-C₅H₁₁OH/H₂O W/O and bi-continuous microemulsions. The results show that the location distribution of PTZ in the membrane phase of the dispersion in microemulsions is mainly dependent on the hydrogen bond between PTZ and n-C₅H₁₁OH (or the counterion), and on the electrostatic attractive interaction between the N atom in PTZ and the polar head of CTAB.     

Fluorescence Quenching of Anthracene by N,N-Diethylaniline in the Sodium Dodecyl Sulfate/Benzyl Alcohol/Water System

Photoinduced electron-transfer reaction of anthracene with N,N-diethylaniline (DEA) was studied in the SDS (sodium dodecyl sulfate)/BA (benzyl alcohol)/H₂O system. In an oil/water microemulsion, only the excited anthracene located at the interface can be quenched by DEA. In a water/oil microemulsion, this quenching reaction occurs in the BA continuous phase. Besides being the quencher of the excited anthracene, DEA could also change the system's structure.     

Location of phenothiazine in sodium dodecyl sulfate/n-pentanol/water microemulsions

The location of phenothiazine (PTZ) in sodium dodecyl sulfate (SDS)/n-pentanol (n-C5H11OH)/water microemulsions is studied by cyclic voltammetry at a Pt electrode. The results indicate that PTZ exists in the membrane phase of microemulsion droplets with its N atom or S atom toward the polar head of the surfactant. In addition, we examine the effect of the compositions and structures of the microemulsions, pH, temperature, and the inorganic salts on the location distribution for PTZ in the membrane phase of the microemulsions. The results show that the location distribution for PTZ in the membrane phase of the microemulsions is mainly dependent on the hydrogen bond between the -NH in PTZ and n-pentanol (or the -SO4- of SDS) and on the electrostatic interaction between the S atom (or N atom) in PTZ and the polar head of SDS.     

Nonionic Microemulsion: Mechanism of Formation and Percolation

A series of microemulsions, both W/O and O/W, based on nonionic surfactants of the form (NP(EO)_n), were prepared using the titration method. Mixing a constant weight of surfactant with a constant volume of the dispersed phase and an initial volume of continuous phase produces an emulsion, which is titrated to clarity with another surfactant (cosurfactant). Plotting (a) the volume of cosurfactant necessary to transform an emulsion into a microemulsion containing a fixed volume of dispersed phase and constant weight of surfactant versus (b) different initial continuous-phase volumes yields a straight line. Extrapolating from experimentally determined values for the cosurfactant volume to the value corresponding to a zero-volume continuous phase allows the determination of the surfactant molar composition and the average number of ethylene oxides (EO) per nonylphenol adsorbed at the interface. Using a surfactant with the same number of ethylene oxides yields a single-surfactant microemulsion. Measurement of surfactants transmittance in the oil and water phases demonstrates that microemulsification occurs when the surfactant interfacial film is equally soluble in the two phases. Surface pressure measurements reveal that oil penetration impedes formation of O/W microemulsions with n-tetradecane or n-hexadecane as dispersed phase. Conductance, particle size, and transmittance measurements show that above a certain dispersed-phase volume percolation of the microemulsion occurs.