A Novel Efficient Ligand in Anionic Polymerization at Elevated Temperature

This work confirmed a novel ligand in the anionic polymerization, lithium phenoxide, which helped to improve the controllability of the polymerization. The stability of n‐BuLi against THF at 0°C was effectively improved by adding lithium phenoxide. More than 60% n‐BuLi in THF was alive with the presence of lithium phenoxide after stirring at 0°C for 20 min, compared to 2% under same conditions but without lithium phenoxide. The propagation of polymerization of styrene (St) and methyl methacrylate (MMA) were retarded after adding lithium phenoxide. And by adding more than 10 fold lithium phenoxide, completed conversion was achieved in the polymerization of MMA in THF at 0°C. The lithium phenoxide showed both promoting and inhibiting effects in the polymerization of isoprene (Ip): it promoted the formation of 3,4‐structure, while mitigated the formation of 1,2‐ and 1,4‐structures. In general, the polymerization rate of Ip was promoted by lithium phenoxide.     

Comportement polarographique et solvatation de quelques cations dans le mélange binaire diméthylsulfoxyde-carbonate de propylène

The electrochemical oxidation of 2,4,6-tri-tert-butylphenol as well as the phenoxide and phenoxy radical derived from it has been investigated in acetonitrile and ethanol+water. The ease of oxidation decreases in the order phenoxide, phenoxy radical, phenol with the separation between potentials for phenoxide oxidation and phenoxy radical oxidation being 1.2 V in acetonitrile. The phenoxide is oxidized to the stable phenoxy radical in a highly reversible reaction in acetonitrile and alkaline ethanol+water. Oxidation of the radical produces a phenoxonium ion which is attacked by water giving 2,4,6-tri-tert-butyl-4-hydroxy-2,5-cyclohexadienone. This two electron product is also formed upon oxidation of the phenol in either solvent. However, in acidic media the hydroxydienone dealkylates give 2,6-di-tert-butylhydroquinone which is oxidized to the final product 2,6-di-tert-butyl-1,4-benzoquinone. The dealkylation is quite rapid in anhydrous acetonitrile but the rate is depressed by the addition of water.A novel double potential step experiment was used to characterize the oxidation of the phenoxy radical. A step to a potential where the phenoxide is oxidized to the phenoxy radical is followed by a step to a potential where the phenoxy radical is oxidized. The current during the second step is unusually small because protons produced by the oxidation of the radical deactivate the phenoxide. The current-time curve was found to agree with that predicted by digital simulation.     

Single‐Electron Transfer in σ‐Complexation Reactions of 2,6‐Dimethoxy‐3,5‐dinitropyridine with Para‐X‐phenoxide Anions in Aqueous Solution

Second‐order rate constants have been measured spectrophotometrically for reactions of 2,6‐dimethoxy‐3,5‐dinitropyridine 1 with 4‐X‐substituted phenoxide anions (X = OMe, Me, H, Cl, and CN) 2a–e in aqueous solution at various temperatures. The effect of phenoxide substituents on the reaction rate was examined quantitatively on the basis of kinetic measurements, leading to nonlinear correlations of Δ^≠H and Δ^≠S with Hammett's substituent constants (σ). Each Hammett plots exhibits two intersecting straight lines for the reactions of 1 with the phenoxide anions 2a–e , whereas the Yukawa–Tsuno plots for the same reactions are linear. The large negative ρ values (?4.03 to ?3.80) obtained for the reactions of 1 with the phenoxide anions possessing an electron‐donating group supports the proposal that the reactions proceed through a single‐electron transfer mechanism.     

Antihydrophobic cosolvent effects for alkylation reactions in water solution, particularly oxygen versus carbon alkylations of phenoxide ions

Antihydrophobic cosolvents such as ethanol increase the solubility of hydrophobic molecules in water, and they also affect the rates of reactions involving hydrophobic surfaces. In simple reactions of hydrocarbons, such as the Diels-Alder dimerization of 1,3-cyclopentadiene, the rate and solubility data directly reflect the geometry of the transition state, in which some hydrophobic surface becomes hidden. In reactions involving polar groups, such as alkylations of phenoxide ions or S(N)1 ionizations of alkyl halides, cosolvents in water can have other effects as well. However, solvation of hydrophobic surfaces is still important. By the use of structure-reactivity relationships, and comparing the effects of ethanol and DMSO as solvents, it has been possible to sort out these effects. The conclusions are reinforced by an ab initio computer model for hydrophobic solvation. The result is a sensible transition state for phenoxide ion as a nucleophile, using its oxygen n electrons to avoid loss of conjugation. The geometry of alkylation of aniline is very different, involving packing (stacking) of the aniline ring onto the phenyl ring of a benzyl group in the benzylation reaction. The alkylation of phenoxide ions by benzylic chlorides can occur both at the phenoxide oxygen and on ortho and para positions of the ring. Carbon alkylation occurs in water, but not in nonpolar organic solvents, and it is observed only when the phenoxide has at least one methyl substituent ortho, meta, or para. The effects of phenol substituents and of antihydrophobic cosolvents on the rates of the competing alkylation processes indicate that in water the carbon alkylation involves a transition state with hydrophobic packing of the benzyl group onto the phenol ring. The results also support our conclusion that oxygen alkylation uses the n electrons of the phenoxide oxygen as the nucleophile and does not have hydrophobic overlap in the transition state. The mechanisms and explanations for competing oxygen and carbon alkylations differ from previous proposals by others.     

A tantalum(V) carbene complex: formation of a carbene-bis(phenoxide) ligand by sequential proton and hydride abstraction

Proton and subsequent hydride abstraction from the bis(phenoxide) ligand of the trimethyltantalum(V) complex affords a cationic tantalum(V) carbene complex, in which two phenoxide groups are linked to the carbene center. The electrophilic nature of the carbene functionality is demonstrated by the reaction with PPh3.     

Micellar catalysis of the reaction of 2,4-dinitrofluorobenzene with phenoxide and thiophenoxide ions

The reactions of 2,4-dinitrofluorobenzene with phenoxide and thiophenoxide ion in water are strongly catalyzed by micelles of cetyltrimethylammonium bromide (CTABr) by factors of 230 and 1100 respectively. Nonionic micelles of Brij weakly catalyze the reaction with thiophenoxide ion. Spectral measurements show that phenoxide, and especially thiophenoxide, ions interact strongly with micelles of CTABr which also markedly change the acid dissociation of phenol under given buffer conditions.     

Efficient regioselective aldol condensation of methyl ketones promoted by organoaluminum compounds,and its application to muscone synthesis

Regioselective aldol condensation of 2-octanone and 2-butanone at the methyl side proceeded in high yields using a system of dialkylaluminum phenoxide/tertiary amine. The intramolecular aldol condensation of 2,15-hexadecanedione was carried out by the same system, especially di-i-butylaluminum phenoxide/pyridine, to give dehydromuscone in 65% yield. Its hydrogenation afforded muscone (3-methylcyclopentadecanone).     

Crystallization of bisphenol-A polycarbonate induced by organic salts: Chemical modification of the polymer. I. Model reactions

The chemical modifications induced in diphenyl carbonate (DPC) by sodium arylcarboxylates between 200 and 250°C were studied to model the behavior of bisphenol-A polycarbonate – salt systems. Reaction between the salt and DPC produces sodium phenoxide, the phenyl arylcarboxylate corresponding to the salt, and carbon dioxide. The two latter compounds probably result from the decarboxylation of an unstable intermediate compound, viz., a mixed carboxylic carbonic anhydride. CO₂ and sodium phenoxide act as catalysts transforming DPC into phenyl salicylate via the formation of a small amount of sodium salicylate. Electrophilic acylation of sodium phenoxide by DPC is another possible but minor source of phenyl salicylate. Above 250°C, phenyl salicylate becomes unstable and pyrolyzes into o-phenoxybenzoic acid, which is immedicately esterified in the presence of DPC into phenyl o-phenoxybenzoate. In DPC + sodium o-chlorobenzoate systems, reaction between phenyl o-chlorobenzoate and sodium phenoxide is another source of phenyl o-phenoxybenzoate.     

Radiolytic transformations of chlorinated phenols and chlorinated phenoxyacetic acids

Hydroxyl radical reactions of selected chlorinated aromatic phenols (2,4-dichlorophenol, 2,4,6-trichlorophenol, and pentachlorophenol) and chlorinated phenoxyacetic acids [2,4-dichlorophenoxyacetic acid (2,4-D), 2,4-D methyl ester, 2-(2,4-dichlorophenoxy)propionic acid (2,4-DP)] were studied using the radiolysis techniques of pulse radiolysis and gamma radiolysis. Hydroxyl radical addition was the prominent reaction pathway for the chlorinated phenoxyacetic acids and also for the chlorinated phenols at pH values below the pK(a) of the compounds. A very prominent change in (*)OH reactivity was observed with the chlorinated phenoxide ions in high pH solutions. Two different reaction pathways were clearly present between the hydroxyl radical and the chlorinated phenoxide ions. One of the reaction pathways was suppressed when the concentration of chlorinated phenoxide ions was increased 10-fold. Amid a greater electron-withdrawing presence on the aromatic ring (higher chlorinated phenoxide ions), the hydroxyl radical reacted preferably by way of addition to the aromatic ring. Steady-state experiments utilizing gamma radiolysis also showed a substantial decrease in oxidation with an increase in pH of substrate.     

Heat-Resistant Polymer-Grafted Carbon Black: Grafting of Poly(Organophosphazenes) onto Carbon Black Surface

Abstract

The grafting of poly(organophosphazenes) onto carbon black surface by the reaction of poly(dichlorophosphazene) (PDCP) with carbon black having sodium phenoxide groups was investigated. PDCP was prepared by the ring-opening polymerization of hexachlorocyclotriphos-phazene in solution using sulfamic acid as a catalyst. The introduction of sodium phenoxide groups onto carbon black was achieved by treatment of phenolic hydroxyl groups on the surface with sodium hydroxide in methanol. Poly(diphenoxyphosphazene) (PDPP) was successfully grafted onto carbon black by the reaction of PDCP with sodium phenoxide groups introduced onto the surface followed by the replacement of chlorine atoms in PDCP with phenoxy groups. The percentage of grafting onto carbon black increased to 206% at 30°C after 12 h. It was found that only 1.4% of sodium phenoxide groups on carbon black surface was used for the grafting of PDCP because of the blocking of the surface by grafted polymer chains. Poly(diaminophenylphosphazene) and poly-(diethoxyphosphazene) were also grafted onto carbon black surface by the treatment of PDCP-grafted carbon black with aniline and sodium ethoxide, respectively. Poly(organophosphazenes)-grafted carbon blacks produced stable colloidal dispersions in good solvents for grafted polymers. Furthermore, thermogravimetric analysis indicated that poly-(organophosphazenes)-grafted carbon blacks were stable in air about 300°C.     

CO2-Transfer durch Metallphenolate: N-Methyl-ε-carolactam/Natriumphenolat als selektives Reagenz für Carboxylierungsreaktionen

CO₂ Transfer by Metal Phenoxides: N-Methyl-ε-caprolactam/Sodium Phenoxide as a Selective Reagent for Carboxylation Reactions Carboxylation reaction of aceton and other substrates with active C H bonds can be carried out selectively by complexes of sodium phenoxide with N-methyl-ε-caprolactam („NMC”︁) and CO₂. With aceton 3-keto-glutaric acid is formed in 85% yield upon hydrolysis. X-Ray structural analysis of the tetrameric [(NMC)Na(OPh)]₄ shows that sodium- and oxygen ions of the phenoxide occupy the positions of a cubus. NMC acts as monodendate ligand, the oxygen atoms of the phenoxide are tridendate bridging ligands. The lithium compound has a similar structure. The complex solved in NMC takes up 0.5 mol CO₂ per mol Natrium which at room temperature and normal pressure is transformed to aceton.     

Alkylation of phenol by myrtenol

Alkylation of phenol by myrtenol in the presence of aluminum phenoxide and aluminum isopropoxide was studied in the temperature range 120–160°C. The reaction occurred with the formation of an array of alkylated phenols. Isomerization of the terpene substituent as a result of rearrangements of the bicyclic myrtenol structure was observed. The side reaction of myrtenol reduction occurred during the alkylation in the presence of aluminum isopropoxide. A significant number of compounds with two aromatic moieties was formed in the presence of aluminum phenoxide.     

由双(氯代酞酰亚胺)与双酚盐的亲核取代缩聚合成聚酰亚胺的研究

本工作是由双(氯代酞酰亚胺)与双酚盐,采用惯常的氢氧化钠溶液制备酚盐方法,通过亲核取代缩聚合成聚酰亚胺。研究了各种参数以及不同结构的单体对双(氯代酞酰亚胺)二苯醚与双酚的缩聚反应的影响。结果表明反应的难易一般决于苯氧负离子的电子密度和反应中心正电荷对电子的吸引力以及聚合物的溶解性。双酚A的苯氧负离子虽有较强的亲核性而且所得聚合物也有较好的溶解性,但很难得到高分子量的聚合物。从电子密度大的苯氧基同时也具有较强的与体系中微量水份形成氢键的能力出发考虑,通过多次排水方法使得双(4-氯代酞酰亚胺)二苯醚与双酚A缩聚所合成的聚酰亚胺的分子量有较大的提高,其比浓对数粘度达0.55dl/g(DMAC,30℃)。还进行了各种单体的共聚。对所合成的聚酰亚胺,进行了溶解性和热稳定性的初步研究。     

Metallomacrocycles as ligands: synthesis and characterisation of aluminium-bridged bisglyoximato complexes of palladium and iron

Dialuminiummacrocycles based on bisglyoximato moieties were prepared and their coordination chemistry with Fe(II) and Pd(II) was investigated. The bridging aluminium centers were supported by several types of tetradentate diphenoxide diamine ligands. The nature of the ancillary ligands bound to aluminium was found to affect the overall geometry and symmetry of the metallomacrocycles. Enantiopure, chiral diphenoxide ligands based on the (R,R)-trans-1,2-diaminocyclohexane backbone afforded cleanly one metallomacrocycle isomer. The size and electronic properties of remote substituents on aluminium-bound ligands affected the binding mode and electronic properties of the central iron. A structurally characterized iron complex shows trigonal prismatic coordination mode, with phenoxide bridges between iron and aluminium. Increasing the size of the phenoxide substituents led to square bipyramidal coordination at iron. Employing p-NO(2)- instead of p-tBu-substituted phenoxide as supporting ligands for aluminium caused a 0.27 V positive shift of the Fe(III)/Fe(II) reduction potential. These results indicate that the present synthetic approach can be applied to a variety of metallomacrocycles based on bisglyoximato motifs to affect the chemistry at the central metal.     

Palladium-catalyzed synthesis of 2,3-dihydro-2-ylidene-1,4-benzodioxins

Palladium-catalyzed condensation of benzene-1,2-diol with various propargylic carbonates afforded regio- and stereoselectively 2,3-dihydro-2-ylidene-1,4-benzodioxins. The reaction is suggested to proceed by the formation of a (sigma-allenyl)palladium complex, followed by the intermolecular attack of the phenoxide ion on this complex to generate a new (sigma-allyl)palladium complex in equilibrium with the corresponding (eta(3)-allyl)palladium complex. Intramolecular attack of the phenoxide ion afforded the corresponding benzodioxan compound. This last attack occurs predominantly at the more electrophilic end of the (eta(3)-allyl)palladium intermediate. The Z- or E-stereochemistry of the products was established by (1)H NMR and proton NOE measurements and also by X-ray analysis on an example. The Z-stereochemistry generally observed is in agreement with the formation of this (eta(3)-allyl)palladium intermediate. However, in the case of tertiary propargylic carbonates, the E-stereochemistry generally observed could be explained by an intramolecular attack of the phenoxide ion on the intermediate (sigma-allyl)palladium complex, in slow equilibrium with the (eta(3)-allyl)palladium complex.     

Gas phase anionic ipso substitution reactions of some alkyl phenyl ethers

It is shown by ¹⁸O labelling that phenoxide anions are formed both by an S_N2 and a nucleophilic aromatic substitution mechanism in the reaction of OH^? with methyl phenyl ether. These mechanisms are of minor importance in the ethyl phenyl ether system where phenoxide anions are generated almost exclusively by an E₂ mechanism.     

Diastereoselective synthesis of β-substituted α-hydroxyphosphinates through hydrophosphinylation of α-heteroatom-substituted aldehydes

The diastereoselective synthesis of β-substituted α-hydroxyphosphinates was achieved by hydrophosphinylation of α-oxy aldehydes and α-amino aldehydes with ethyl allylphosphinate catalyzed by lithium phenoxide.     

Direct measurement of surface complex loading and surface dipole and their effect on simple device behavior

Tin complexes of phenoxide ligands having a range of dipole moments were prepared on the surface of indium-tin oxide (ITO). Surface complex loadings and stoichiometries were measured by quartz crystal microgravimetry. Work functions of ITO substrates treated with these various surface complexes were measured using a Kelvin probe. Surface complex dipole moments were then calculated based on measured surface loadings. Changes in the ITO work function effected by surface phenoxide complex introduction correlate with these surface complex dipole moments and with total surface dipole per unit area, and current densities in simple hole-only diode devices also correlate with these total surface dipoles.     

Measurement of total alkali and phenol in process liquor by FIA

Flow injection analysis (FIA) has been applied to the determination of total phenol and total alkali in high concentration alkaline phenoxide liquors as it occurs in industrial process streams. The total alkali content and total phenol content in samples containing 20–50% (w/v) sodium phenoxide can be directly measured without mutual interference. The first is measured by peak width measurement based FIA with conductimetric detection utilizing an electronic circuit to permit automatic measurement from minima to minima. The total phenol is measured by the Berthelot reaction using NaOCl and ammonia to form indophenol blue, monitored at 660 nm with a light emitting diode-based detector.     

Kinetics of the Reactions of 4-Nitrochlorobenzene with Substituted Phenolates in an Aprotic Polar Solvent

The kinetics of 4-nitrochlorobenzene reactions with substituted phenolates in the medium of N,N-dimethylacetamide was studied. The BrØnsted relation is fulfilled by substituted potassium phenolates: the nucleophilicity of phenolates increases with an increase in their basicity. The rate-limiting step in the reactions of 4-nitrochlorobenzene with substituted phenolates and potassium resorcinate is changed from the phenoxide anion to the phenoxide dianion. In the latter case, electron transfer from the resorcinate dianion with the generation of radical species can be responsible for the reaction rate.