STABILITY OF POLY（N,N＇-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE） MICROGEL DISPERSION AND ADJUSTMENT OF THE HYDROPHOBICITY IN THE MICROGELS

In the UV-Vis spectra of pure light-scattering systems, there is an exponential relationship between absorbance and wavelength （A = Kλ^-n）. Here, the exponent n is named as flocculation-coagulation parameter. In the present paper, the effects of different additives on the stability of poly（N,N＇-methylenebisacrylamide-co-4-vinylpyridine） （poly（Bis-co-4-VP）） microgel dispersion were studied in detail via this parameter. The results showed that the stability of the dispersion mainly comes from the ionization of pyridine groups, making the microgel positively charged on its surface. This was confirmed by the measurement of Zeta potential and the result of conductometric titration. The result of fluorescence analysis indicated that the hydrophobicity in the microgels is enhanced with the increase in total 4-VP unit content.     

Preparation of α-Fe2O3 Nanofiber via Electrospinning Process

A thin PVA/FeCl3 composite fiber was prepared by using sol-gel processing and electrospinning techniques. A nanofiber of α-Fe2O3 with the diameter of 50-150 nm was obtained via high temperature calcination of the PVA/FeCl3 composite fiber. The material was characterized by infra-red (IR) spectroscopy, X-ray diffraction(XRD), and scanning electron microscopy(SEM). The results show that the fiber after the calcination at 700℃ was a pure α-Fe2O3 nanofiber.     

Solution Blowing of Poly（dimethylsiloxane）/Nylon 6 Nanofiber Mats for Protective Applications

A new strategy was developed to fabricate superhydrophobic nylon 6 nanofibers, in which the blend solutions of poly(dimethylsiloxane)(PDMS) prepolymer and nylon 6 was spun using an innovative solution blowing process, and then the PDMS prepolymer contianning nanofibers were cured to obtain PDMS/nylon 6 nanofiber mats. Morphology, surface composition, non-wetting property and protective performance were investigated. The results showed that the addition of PDMS prepolymer improved the spinnability of the spinning solutions, and the PDMS/nylon 6 nanofibers had smooth surfaces and diameters from 100 nm to 350 nm. The presence of PDMS effectively enhanced the hydrophobicity of the nanofiber mats, showing water contact angles of 132° to 161° for PDMS contents of 1 wt% to 3 wt%. The PDMS/nylon 6 mats also possessed excellent protective and transport properties. The results indicated the potential application of the novel nanofiber mats in protective clothing.     

A VERSATILE AND REGIOSELECTIVE SYNTHESIS OF VICINAL AZIDOALCOHOLS USING CROSS-LINKED POLY（4-VINYLPYRIDINE） SUPPORTED AZIDE ION UNDER SOLVENT-FREE CONDITIONS

A new polymeric reagent, cross-linked poly（4-vinylpyridine） supported azide ion, [P4-VP]N3, was introduced as polymeric reagents for efficient and regioselective conversion of epoxides to azidohydrins in the presence of cross-linked poly（4-vinylpyridine） supported sulfuric acid, [P4-VP]H2SO4, as a solid proton source and as catalyst under solvent-free conditions. The advantages of this polymeric reagent over some of those reported in the literature are easy work-up procedure and regeneration of the reagent.     

Electrospinning Synthesis and Photoluminescence Properties of SnO2：xEu3＋ Nanofibers

NnO2：xEu3＋（x=O, 1%, 3%, 5%, molar fraction） fibers were synthesized by electrospinning technology. The size of the as-prepared fibers is relatively uniform and the average diameter is about 200 nm with a large draw ratio. The as-prepared Eu3＋ doped SnO2 nanofibers have a rutile structure and consist of crystallitc grains with an average size of about 10 nm. A slight red shift of the A1gand Bag vibration modes and an additional peak at 288 nm were observed in the Raman spectra of the nanofibers. The energies of bandgaps of the SnO2 nanofiber with Eu doping of 1% and 3% are 2.64 eV, and the energy of bandgap is 2.94 eV with Eu doping of 5%（molar fraction）. There is only orange emission（5D0→7F1 magnetic dipole transition） for Eu doped SnO2 nanofibers, and no red emission could be observed. The orange emission upon indirect excitation splits into three peaks and the peak intensity at the excitation wavelength of 275 nm is higher than that at the excitation wavelength of 488 nm.     

Melt-electrospinning of PMMA

<正>The melt electrospinning of PMMA was investigated.The averaged fiber diameter thus obtained was reduced from 34.0μm to 19.7μm by adding di-(2-ethylhexyl)phthalate to reduce viscosity of the molten PMMA,and it further lowered down to 4.0μm when a KCl/ice-water solution was used as collection media.A comparison study on the PMMA fibers made through melt electrospinning and done by solution electrospinning was made.It was found that solution electrospinning was capable of fabricating very thin fibers as small as to a nanometer size,but resulted in a much wider fiber diameter range than melt-electrospinning did.In general,within some extent an increase in applied voltage and amount of the additive or a decrease in collection distance can give rise to a decreased fiber diameter and improved mechanical performance for the PMMA fibers by melt electrospinning.It was also indicated that the mechanical properties of the PMMA fibers made through melt-electrospinning were superior to those by solution elctropspinning.     

Study on supported combined liquid membrane containing HEH（EH）P and HNO3 for trivalent gadolinium transfer

A novel kind of supported combined liquid membrane（SCLM） has been studied for the Gd（Ⅲ） transfer.SCLM contained polyvinylidene fluoride membrane（PVDF） as the liquid membrane support and renewal solution including HNO₃ solution as the stripping solution and 2-ethyl hexyl phosphonic acid-mono-2-ethyl hexyl ester（HEH（EH）P） as the carrier dissolved in kerosene. The mixed solution of carrier and kerosene was membrane solution.The optimum transport conditions of Gd（Ⅲ） were that concentration of HNO₃ solution was 4.00 mol/L,concentration of carrier was 0.16 mol/L,and volume ratio of membrane solution to stripping solution was 30:30 of the renewal phase,and pH value was 4.80 of the feed phase.Under the optimum condition studied, when initial concentration of Gd（Ⅲ） was 1.00×10^-4 mol/L,the transfer rate of Gd（Ⅲ） was 96.8%during 130 min.     

STABILITY OF POLY(N,N''''-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE)MICROGEL DISPERSION AND ADJUSTMENT OF THE HYDROPHOBICITY IN THE MICROGELS

In the UV-Vis spectra of pure light-scattering systems,there is an exponential relationship between absorbance and wavelength(A=Kλ~(-n)).Here,the exponent n is named as flocculation-coagulation parameter.In the present paper,the effects of different additives on the stability of poly(N,N'-methylenebisacrylamide-co-4-vinylpyridine)(poly(Bis-co-4-VP)) microgel dispersion were studied in detail via this parameter.The results showed that the stability of the dispersion mainly comes from the ionization of pyridine groups,making the microgel positively charged on its surface.This was confirmed by the measurement of Zeta potential and the result of conductometric titration.The result of fluorescence analysis indicated that the hydrophobicity in the microgels is enhanced with the increase in total 4-VP unit content.     

Change Color Effect and Spectral Properties of Gold Nanoparticle-cationic Surfactants System

The change color effect of gold nanoparticle solutions was studied by means of resonance scattering and absorption spectrometry and scan electron microscopy. The red Au nanoparticles with a size of 10 nm exhibit a resonance absorption peak and a resonance scattering peak all at 525 nm. After some inorganic electrolyte was added to a red Au nanoparticles solution, the color of the solution became blue and the absorbance at 600-700 nm was significantly increased. The ratio of the concentration of rnonovalent cations, at which the resonance scattering of the system at 525 nm is maximal to that of divalent cations, is in the range of 100 : 1--100 ; 1. 8. It is in good agreement with the Schulze-Hardy rule of the coagulation value of electrolyte. After adding some cationic surfactants to the above solution, the color of the solution is in deep blue, with two resonance absorption peaks at 550 and 680 nm, and a greatly enhanced resonance scattering peak at 525 nm. The experiments demonstrate that the stronger the hydrophobicity of the cationic surfactant is, the stronger the change color effect of the Au nanoparticle solution promoted by cationic surfactant is. The change color effect of Au nanoparticle solution is resulted from the increased diameter of Au nanoparticles, and the changes of resonance absorotion DeaR and resonance scattering.     

Acyl Thioacetamide-group Chelated Nanofiber to Adsorb Silver Ions from Aqueous Systems

The acyl thioacetamide-group chelated nanofiber was prepared from polyacrylonitrile（PAN） fiber with thioacetamide as vulcanization agent by an electrospinning process combined with chemical modification.It was found that the chelated nanofiber displays a high adsorption capacity and adsorption selectivity for Ag（Ⅰ） ions from aqueous systems.The adsorption capacity of Ag（Ⅰ） ions on chelated nanofiber increases with the increase of adsorption time.Kinetics of the Ag（Ⅰ） ions adsorption was found to follow pseudo-second-order rate equation.Based on the characterization results,a possible mechanism of Ag（Ⅰ） ions adsorbed on the acyl thioacetamide-group chelated nanofiber was proposed.The chelated nanofiber could not only chelate to Ag（Ⅰ） ions but also reduce them.This study provides a promising nanofiber material for removing heavy metal ions.     

聚丙烯腈纳米纤维的再细化

通过电纺丝法研究了溶剂种类、溶液浓度、纺丝倾斜角、聚合物分子量对纳米纤维形态和直径的影响,寻找到最佳工艺条件,并得到了平均直径为20nm的超细纤维.     

魔芋葡甘聚糖/聚乙烯醇纳米纤维膜及其释药行为研究

为了研制药物缓释效果优良的薄膜材料,利用静电纺丝设备研制不同比重的魔芋葡甘露聚糖/聚乙烯醇纳米纤维膜,并通过扫描电镜、傅里叶变换红外光谱和示差扫描量热法表征纳米纤维膜的结构和性能,结合体外实验和数学模型研究其缓释行为.结果显示当魔芋葡甘露聚糖含量占纳米纤维膜总质量约76%时,纳米纤维膜中微纤丝粗细最均匀且结点较少,纳米纤维膜中魔芋葡甘聚糖和聚乙烯醇之间存在明显的相互作用,含有5-氨基水杨酸的纳米纤维膜在pH=7.4 PBS磷酸盐缓冲液中25 h的累积释放量大约为45%,显示出良好的药物缓释效果,其缓释行为与Higuchi模型具有较高的拟合度.研究表明利用静电纺丝设备研制的魔芋葡甘聚糖/聚乙烯醇纳米纤维膜可以为药物缓释载体的开发提供理论依据.     

恩诺沙星分子印迹纳米纤维膜的制备及性能

通过沉淀聚合法制备了恩诺沙星（ENRO）分子印迹聚合物（MIPs）微球,将其添加到聚乙烯醇（PVA）溶液中,采用静电纺丝技术制备了恩诺沙星分子印迹纳米纤维膜（MINFMs）. 利用扫描电子显微镜（SEM）研究了纺丝液浓度、纺丝电压及接收距离对MINFMs纤维直径及表面形貌的影响,从溶胀性、孔隙率、吸附容量及吸附选择性等几个方面对印迹膜的性能进行了评价. 结果表明,在环境温度25 ℃、相对湿度 40%~50%、MIPs加入量8%（质量分数）、PVA质量分数7%、纺丝电压15 kV和接收距离25 cm的条件下,得到的MINFMs的纤维形态良好,纤维平均直径为180 nm. MINFMs的溶胀度和孔隙率分别为136.76%和33.42%,均大于非印迹纳米纤维膜（NINFMs）. 动力学吸附性能结果显示,MINFMs在300 min后吸附基本达到平衡,且明显高于NINFMs的吸附量;Scatchard分析结果表明,在所研究的浓度范围内MINFMs对模板ENRO的结合位点是等价的,其离解平衡常数（K_d）与最大表观结合量（Q_max）分别为505.817 mg/L和3.862 mg/g. 与环丙沙星（CIP）和氧氟沙星（OFL）相比,MINFMs对ENRO表现出更强的特异性吸附能力.     

聚4-乙烯基吡啶与Cu(Ⅱ)离子配合过程及配合物的结构

采用粘度法确定了聚4-乙烯基吡啶(P4VP)在乙醇/水混合溶剂中的临界交迭浓度c*, 分别在稀溶液与亚浓溶液浓度范围内, 采用光谱法与电导滴定法研究了P4VP与Cu(II)离子的配合过程及配合物的结构, 通过红外光谱(FTIR)对配合物的化学结构进行了表征, 并用差示扫描量热法(DSC)测定了配合物的热性能. 结果表明, 对于相对分子质量为1.06×105的P4VP, 其c*为15 mmol&#8226;L&#8722;1(按P4VP中的链节量计算). 在稀溶液中P4VP与Cu(II)离子形成可溶性的分子内配合物, 表观配位数为9~10；在亚浓溶液中, P4VP与Cu(II)离子发生分子间配合作用, 由于配位交联, 形成不溶性的配合物P4VP-Cu(II), 配位数为3. P4VP与Cu(II)离子形成配合物后, 玻璃化温度明显提高.     

丙烯腈-衣康酸基纳米纤维纱线的热稳定及碳化研究

碳纳米纤维主要以聚丙烯腈(PAN)作为前驱体,通过纺丝、热稳定、碳化等后处理工艺制备而得。但是,PAN基纳米纤维取向度低、致密性差,热稳定后环化度低,碳化后导电性差等缺点阻碍其在高性能碳纳米纤维领域的发展。因此,在PAN分子链中引入衣康酸(IA),通过溶液聚合法合成了P(AN-co-IA)共聚物并通过静电纺丝法制备了P(AN-co-IA)基纳米纤维纱线。研究了纱线中纳米纤维的取向度、致密性以及在热稳定后的环化反应程度。重点研究了P(AN-co-IA)基碳纳米纤维纱线的线电阻、微观结构与碳化温度的关系。用扫描电子显微镜(SEM)对纱线进行形貌表征。用X-射线衍射仪(XRD)、傅里叶显微红外仪(FT-IR)、拉曼光谱仪(Raman)对纱线进行结构分析。结果表明,P(AN-co-IA)基原丝纱线的结构较致密,取向度较高。热稳定后的P(AN-co-IA)基纳米纤维的环化度高于PAN基纳米纤维。当碳化温度升至1100℃时,P(AN-co-IA)基碳纳米纤维纱线的线电阻明显降低至14Ω/cm。当碳化温度继续升高至1400℃,纱线的线电阻没有明显变化,但通过Raman光谱分析其无序碳结构会大幅增加。本文的研究结果为制备高取向性、高致密性和高电导性的碳纳米纤维纱线提供了一定的理论及实验基础。     

Quantitative Quaternization of Poly(4-Vinyl Pyridine)

Quaternization of poly(4-vinyl pyridine), (P4-VP) by common alkyl halides can be performed with relatively low (up to 65–70%) conversion yields. Here we describe fully quaternization of P(4-VP) with activated halides such as chloro 2-propanone and 2-chloroacetamide in dimethylformamide (DMF) at room temperature.     

Polymerization of 4-vinylpyridine with acylating agents

The reaction of 4-vinylpyridine (4-VP) with acylating agents in diethyl ether was investigated. Acetyl chloride (AcCl) and trifluoroacetic anhydride [(TFAc)₂O] yield colored oligomers with 4-VP, denoted P-4VP—AcCl (III) and P-4VP—(TFAc)₂O (IV). Nuclear magnetic resonance spectrometry was used to analyze these products. A structure (XII), representing a random copolymer resulting from 1,2-polyaddition and 1,6-polyaddition to 4-VP, is proposed for III and IV. Alternative mechanisms which explain these observations are discussed. Acetic anhydride (Ac₂O) does not acylate 4-VP. It is proposed that this result is caused by the inability of Ac₂O to quaternize 4-VP as an initial step leading to polymerization.     

Effects of metal salts on polymerization. Part VII. Radical polymerization and spectra of vinylpyridine in the presence of cobaltous chloride

The radical polymerizability of vinylpyridines in the presence of cobaltous chloride was studied in DMF solution, and the results were correlated with the spectroscopic data obtained for methanol solution. In general, the behavior of vinylpyridine complexed with cobaltous chloride is qualitatively the same as that of zinc complexes reported previously. The rates of polymerization were enhanced by the addition of cobaltous chloride when 4-vinylpyridine(4-VP) or 2-methyl-5-vinylpyridine(MVP) was the monomer, whereas the polymerization of 2-vinylpyridine(2-VP) was retarded by cobaltous chloride. The monomer reactivity of all the vinylpyridines was also enhanced by complex formation as studied by copolymerization with styrene. The enhancement of reactivity of 4-VP complexed with cobaltous chloride is somewhat smaller than that of the corresponding zinc complex.     

The Polymerization of Propargyl Chloride Activated by Interaction with Poly(4-vinylpyridine)

The reaction between poly (4-vinylpyridine) and propargyl chloride was studied in methanol. It was shown that, independently of the ratio of reactants to each other, the end products of the reaction are polymers with conjugated bond systems formed by the opening of the propargyl triple bond which was activated by interaction with poly (4-vinylpyridine). It was shown that “normal” quarternization of poly (4-vinylpyridine) by propargyl chloride precedes accelerated polymerization of propargyl chloride which begins at 6 to 8% alkylation. It was established that the solution becomes structured before accelerated polymerization begins. A possible mechanism for this reaction has been proposed.