Surface properties and photocatalytic activity of nanocrystalline titania films

In this work the efficiency and physicochemical details of a thin film produced by help of a microwave assisted sol gel technique is compared to different commercial powders (Degussa P25 and Hombikat UV100) deposited on glass substrates. Furthermore, a supercritical produced TiO₂ powder (SC 134) was included in the comparison.The prepared TiO₂ films were characterized using XRD, XPS, AFM, DSC and DLS. The photocatalytic activity was determined using stearic acid as a model compound. Investigation of the prepared films showed that the Degussa P25 film and the sol–gel film were the most photocatalytic active films. The activity of the films was found to be related to the crystallinity of the TiO₂ film and the amount of surface area and surface hydroxyl groups. Based on the XPS investigation of the films before and after UV irradiation it was suggested that the photocatalytic destruction of organic matter on TiO₂ films proceeds partly through formation of hydroxyl radicals which are formed from surface hydroxyl groups created by interactions between adsorbed water and vacancies on the TiO₂ surface. Furthermore a correlation between the amount of OH groups on the surface of the different TiO₂ films and the photocatalytic activity was found.     

Sol–gel doped TiO<Subscript>2</Subscript> nanomaterials: a comparative study

Among the great number of sol–gel prepared nanomaterials, TiO₂ has attracted significant interest due to its high photocatalytic activity, excellent functionality, thermal stability and non-toxicity. The photocatalytic degradation of pollutants using un-doped and doped TiO₂ nanopowders or thin films is very attractive for applications in environmental protection, as a possible solution for water purification. The present work describes a comparative structural and chemical study of un-doped TiO₂ and the corresponding S- and Ag-doped materials. The photocatalytic activity was established by testing the degradation of organic chloride compounds from aqueous solutions. Sol–gel Ag-doped TiO₂ coatings, prepared by co-gelation and sol–gel Ag-doped TiO₂ coatings obtained from nanopowders were also compared. Their structural evolution and crystallization behaviour (lattice parameters, crystallite sizes, internal strains) with thermal treatment were followed by thermal analysis, X-ray diffraction, transmission electron microscopy, atomic force microscopy and specific surface areas measurements. X-ray photoelectron spectroscopy analyses were performed to characterize the surface composition and S or Ag speciation, which was used to interpret the catalytic data.     

Pyrolysis study of sol-gel derived TiO2 powders: Part IV. TiO2-anatase prepared by hydrolysing titanium(IV) isopropoxide without chelating agents

An amorphous TiO₂ gel was obtained by hydrolysing titanium(IV) isopropoxide with a stoichiometric amount of water using SnCl₂ as catalyst. In these operative conditions, a TiO₂ gel matrix containing a lower fraction of organic residual was obtained with respect to samples prepared by previously modifying the titanium alkoxide precursor with chelating ligands. Dried gel powders were characterized by N₂ adsorption analyses, FT-IR and XRD measurements. Thermogravimetric (TG) and differential thermal analysis (DTA) coupled with mass spectrometric (MS) and gas chromatographic (GC) measurements were performed in order to identify the organic products released from TiO₂ gel pyrolysis. The Tg-MS semiquantitative analysis of the main evolved species allowed to describe both the chemical composition of the initial TiO₂ gel and the chemical rearrangements occurring in the matrix during heating up to its crystallisation to anatase form at 420°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

Formation of Anatase Nanocrystals in Sol-Gel Derived TiO2-SiO2 Thin Films with Hot Water Treatment

We have successfully prepared transparent and porous anatase nanocrystals-dispersed films by treating the sol-gel derived TiO₂-SiO₂ films containing poly(ethylene glycol), PEG, with hot water. This process was done at temperatures lower than 100°C under atmospheric pressure, and thus anatase nanocrystals-dispersed films can be formed on various kinds of substrates including organic polymers with poor heat resistance. The changes in structure and composition of the TiO₂-SiO₂ gel films with hot water treatment were related to the formation process of anatase nanocrystals in the TiO₂-SiO₂ gel films with hot water treatment. The formation of anatase nanocrystals was found to proceed to hydrolysis of Si–O–Ti bonds and dissolution of SiO₂ component. In addition, porous film structure formed by leaching of PEG with hot water treatment led to homogenous dispersion of anatase nonocrystals in the films.     

Synthesis of bimodal porous structured TiO2 microsphere with high photocatalytic activity for water treatment

In this work bimodal structured titanium dioxide (TiO₂) microsphere has been prepared from commercial TiO₂ powder and nano-sized titania gel via sol–gel spray-coating technique. Crystallization and transformation behavior of titania gel were investigated. The results revealed that the crystallization and transformation of anatase particles were substantially affected by the concentration of solvent and calcination temperature. Anatase crystallite size of 10 nm was obtained at mole ratio of solvent/precursor 50/1 and calcination temperature of 450 °C. The prepared nano-sized titania gel was embedded within the core (commercial TiO₂, P25) during the spraying process. The prepared TiO₂ microsphere was characterized using X-ray diffractometer (XRD), scanning electron microscope (SEM), field emission electron microscope (FESEM) and micropore analysis. The photocatalytic activity was monitored by following the degradation of phenol with activity benchmarked against commercial P25 (Degussa). The increase of photocatalytic activity of TiO₂ microsphere was attributed to the nano-sized anatase crystallite which has been incorporated into the TiO₂ microsphere.     

NixCo3-xO4表面修饰对CdSe/TiO2纳米管阵列光电化学氧化水活性的影响

利用氨挥发诱导法在CdSe/TiO2纳米管阵列表面负载一层NixCo3-xO4。采用SEM、XRD、XPS、UV-Vis对样品进行表征,通过线性扫描伏安法测定光阳极的释氧电势来评价其光电水氧化活性。结果表明:表面NixCo3-xO4是尖晶石结构;相对于CdSe/TiO2纳米管阵列光阳极,NixCo3-xO4/CdSe/TiO2光阳极能将光电氧化水的过电势降低430 mV。Ni离子的引入使得NixCo3-xO4表面富含三价阳离子(Ni3+,Co3+),从而促进CdSe/TiO2光阳极光电水氧化的进行。     

Pure and modified TiO2 photocatalysts and their environmental applications

Semiconductor photocatalysis is a process that harnesses light energy in chemical conversions. In particular, its applications to environmental remediation have been intensively investigated. The characteristics of TiO₂, the most popular photocatalyst, is briefly described and selected studies on the degradation/conversion of various recalcitrant pollutants using pure and modified TiO₂ photocatalysts, which were carried out in this group, are reviewed. Photocatalytic reactions are multi-phasic and take place at interfaces of not only water/TiO₂ and air/TiO₂ but also solid/TiO₂. Examples of photocatalytic reactions of various organic and inorganic substrates that are converted through the photocatalytic oxidation or reduction are introduced. TiO₂ has been modified in various ways to improve its photocatalytic activity. Surface modifications of TiO₂ that include surface platinization, surface fluorination, and surface charge alteration are discussed and their applications to pollutants degradation are also described in detail.     

Two-Dimensional Sol-Gel Synthesis of Ultrathin Zirconia and Hetero-Layered Titania/Zirconia Films

Synthesis of ZrO₂ and hetero-layered TiO₂/ZrO₂ ultrathin films was investigated by two-dimensional sol-gel process assisted by n-octadecylacetoacetate (C₁₈AA). When a hexane solution of tetrabutoxyzirconium (TBZ) and C₁₈AA was spread on the water surface, Zr-based gel films stabilized with C₁₈AA were formed at the air/water interface. After deposition on substrates, the gel films were successfully transformed into ZrO₂ ultrathin films by heating at 773 K for 0.5 h, the thickness of which was controllable on the order of sub-nanometer level by the number of gel-layer deposition and the molar ratio of [TBZ]/[C₁₈AA]. Well-organized hetero-multilayers composed of ultrathin TiO₂ and ZrO₂ layers could be fabricated by the alternate deposition of C₁₈AA-stabilized Ti- and Zr-gel films.     

Structure of TiO2 in TiO2-SiO2 prepared by a complexing agent-assisted sol-gel procedure

Many types of TiO₂-SiO₂ (Ti:Si=50:50 mol%) were prepared by the sol-gel procedure with and without 2-methyl-2, 4-pentanediol (MPD) as an organic ligand. The effect of MPD on the gel structure and the properties of the TiO₂ crystals were studied by XRD and raman spectroscopy, and the effect of the sol standing time on the properties of the TiO₂ crystals were also studied by XRD spectroscopy. In the gels with MPD, anatase of TiO₂ appeared at approximately 580°C, and the crystal structures were similar despite the difference in the gel preparation procedure. The titania gels with MPD were presumed to be dispersed in the silica gel matrix without any Ti-O-Si bond. In the presence of MPD, the formation of titania gels is controlled and the specified TiO₂ crystal is produced.     

Characterization of Titanium Dioxide Doped with Nitrogen and Sulfur and its Photocatalytic Appraisal for Degradation of Phenol and Methylene Blue

The degradation of organic dyes in the presence of modified TiO₂ is still under intensive investigation. We report here an evaluation of the photocatalytic activity of nitrogen‐ (N‐) and sulfur‐ (S‐) doped TiO₂ for the degradation of phenol and methylene blue (MB). N‐doped TiO₂ (N–TiO₂), S‐doped TiO₂ (S–TiO₂), and N–S‐doped TiO₂ (N–S–TiO₂) were prepared using the sol–gel method. The photocatalytic activity was evaluated in a batch reactor using phenol and MB as models of pollutants. In addition, this investigation was performed using a household lamp as the visible light source. Properties of the synthesized materials in terms of Brunauer–Emmett–Teller (BET) surface analysis, field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and photocatalytic ability were examined. Our study shows that N–S–TiO₂ exhibits better photocatalytic degradation ability for all the considered dyes compared to the other doped TiO₂ materials. In conclusion, we have successfully prepared and evaluated the photocatalytic activity of N‐ and S‐doped TiO₂ for the degradation of phenol and MB using an ordinary household lamp.     

Effects of Heat Treatment on Photocatalytic Property of Sol-Gel Derived Polycrystalline TiO2

Polycrystalline TiO₂ in the bulk form was prepared by hydrothermal treatment of amorphous TiO₂ gel, and its photocatalytic activity for degradation of ethanol and physical properties were investigated after drying and calcination (300–650°C). The maximum photocatalytic activity reached when the polycrystalline TiO₂ was calcinated at temperatures from 300 to 500°C, which was almost the same as for a commercial TiO₂ powder. It was markedly reduced above 600°C. Photocatalytic activity of TiO₂ was affected by crystal growth of anatase, progress of sintering, anatase-rutile transformation and morphology of the polycrystalline TiO₂. It was a characteristic of the polycrystalline TiO₂ prepared in this study that the photocatalytic activity did not vary so much with the calcination temperature in the range of 300–500°C.     

Preparation of diatomite–TiO<Subscript>2</Subscript> composite for photodegradation of bisphenol-A in water

To enhance the photodegradation performance of pure titanium dioxide (TiO₂), diatomite was used as a porous carrier to immobilize TiO₂ powders using calcination method. The photodegradation of bisphenol-A (BPA; 4,4′-isopropylidenediphenol), which has been listed as one of endocrine disrupting chemicals, was carried out in a batch suspension reactor using pure TiO₂ powders and diatomite–TiO₂ composites, respectively. Under the controlled conditions, the photocatalytic efficiencies of the BPA degradation by the diatomite–TiO₂ composites can be found to be higher than those by pure TiO₂ powders. This result should be attributable to the accessibility of the BPA molecules to the surface of TiO₂ particle in the modified photocatalysts, showing that the enrichment of the organic solute enhanced the rate of photodegradation on the diatomite–TiO₂ composite. However, the photodegradation efficiency was not dependent on the pore properties of these TiO₂ photocatalysts. The experimental results further indicated that the photodegradation kinetics for the destruction of BPA in water followed the first-order model well. The apparent first-order reaction constants (k _obs), thus obtained from the fittings of the model, were in line with the destruction-removal efficiencies of BPA in all the photocatalytic experiments.     

Impact of TiO2 nanoparticles on morphology and performance of crosslinked polyimide organic solvent nanofiltration (OSN) membranes

Chemically crosslinked polyimide organic–inorganic composite nanofiltration membranes suitable for application in harsh organic solvents were successfully prepared by phase inversion of dope solutions. TiO₂ nanoparticles were dispersed in these dope solutions, comprising polyimide (PI) in N,N-dimethylformamide/1,4-dioxane. The impact of TiO₂ on the resulting PI membranes was investigated using SEM, TGA, water contact angle, dope viscosity measurements and mechanical strength. The presence of TiO₂ nanoparticles within the membrane matrix was proved by the detection of a peak characteristic of TiO₂ in the WAXS pattern. SEM pictures of the cross-section of the PI/TiO₂ membranes showed dramatically changed morphology compared to reference membranes with no TiO₂ addition. Macrovoids present in reference membranes were suppressed by increasing loading of TiO₂ nanoparticles, and eventually disappeared completely at a TiO₂ loading above 3 wt.%. Decreasing water contact angle and an increase in ethanol flux indicated that hydrophilicity increased as nanoparticle loading increased. The effect of TiO₂ on the functional performance of the membranes was evaluated by measuring flux and rejection using cross-flow filtration. Perhaps surprisingly, the presence of TiO₂ improved the compaction resistance of the membranes, whereas rejection and steady flux were almost unaltered.     

Photocatalytic activity of polyaniline/Fe-doped TiO2 composites by in situ polymerization method

This study was focused on the photocatalytic activity of polyaniline (Pani)/iron doped titanium dioxide (Fe–TiO₂) composites for the degradation of methylene blue as a model dye. TiO₂ nanoparticles were doped with iron ions (Fe) using the wet impregnation method and the doped nanoparticles were further combined with Pani via an in situ polymerization method. For comparison purposes, Pani composites were also synthesized in the presence undoped TiO₂. The photocatalyst and the composites were characterized by standard analytical techniques such as FTIR, XRD, SEM, EDX and UV–Vis spectroscopies. Fe–TiO₂ and its composites exhibited enhanced photocatalytic activity under ultraviolet light irradiation. Improved photocatalytic activity of Fe–TiO₂ was attributed to the dopant Fe ions hindering the recombination of the photoinduced charge carriers. Pani/Fe–TiO₂ composite with 30?wt.% of TiO₂ nanoparticles achieved 28% dye removal and the discoloration rate of methylene blue for the sample was 0.0025?min^?1. FTIR, XRD, SEM, EDX and UV–Vis spectroscopies supported the idea that Fe ions integrated into TiO₂ crystal structure and Pani composites were successfully synthesized in the presence of the photocatalyst nanoparticles. The novelty of this study was to investigate the photocatalytic activity of Pani composites, containing iron doped TiO₂ and to compare their results with that of Pani/TiO₂.     

Organic–inorganic hybrid membranes prepared from the sol–gel process of poly(butyleneadipate‐co‐terephthalate) and TiO2

Organic–inorganic hybrids based on poly(butyleneadipate‐co‐terephthalate)/titanium dioxide (PBAT/TiO₂) hybrid membranes were prepared via a sol–gel process. The PBAT/TiO₂ hybrid membranes were prepared for various PBAT/TiO₂ ratios. The resulting hybrids were characterized with a morphological structure, hydrophilicity, biodegradability, and thermal properties. The results showed that macrovoids underwent a transition into a sponge‐like membrane structure with the addition of TiO₂. After sol–gel transition, a strong interaction between the inorganic network and polymeric chains led to an increase in glass transition temperature (T_g), thermal degrading temperature, and hydrophilicity, and hence a higher biodegradability. According to X‐ray diffraction measurements of the crystal structure of the hybrid, the presence of TiO₂ did not change the crystal structure of PBAT. TiO₂ networks are uniformly dispersed into the PBAT matrix and no aggregation of TiO₂ networks in the hybrid membranes was observed through the small angle X‐ray scattering measurements. Thus, the sol–gel process of PBAT and TiO₂ can be used to prepare a hybrid with higher application temperature and faster biodegradation rate. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of TiO2 thin film immobilized on glass tube and its application to PCE photocatalytic destruction

TiO₂ was immobilized on to the surface of a pyrex glass tube through a dip coating process, and a pyrex glass tube with TiO₂ thin film was used as a batch reactor and continuous flow reactor for the photocatalytic destruction of PCE in water. TiO₂ could be successfully immobilized with a thickness of 0.3 μm in the pyrex glass tube. The TiO₂-immobilized pyrex glass tube itself showed high photocatalytic activity for the destruction of PCE in water.     

Synthesis of Hollow Mesoporous TiO2 Microspheres with Single and Double Au Nanoparticle Layers for Enhanced Visible‐Light Photocatalysis

A facile method was used to prepare hollow mesoporous TiO₂ and Au@TiO₂ spheres using polystyrene (PS) templates. Au nanoparticles (NPs) were simultaneously synthesized and attached on the surface of PS spheres by reducing AuCl₄^? ions using sodium citrate which resulted in the uniform deposition of Au NPs. The outer coating of titania via sol‐gel produced PS@Au@TiO₂ core–shell spheres. Removing the templates from these core–shell spheres through calcination produced hollow mesoporous and crystalline Au@TiO₂ spheres with Au NPs inside the TiO₂ shell in a single step. Anatase spheres with double Au NPs layers, one inside and another outside of TiO₂ shell, were also prepared. Different characterization techniques indicated the hollow mesoporous and crystalline morphology of the prepared spheres with Au NPs. Hollow anatase spheres with Au NPs indicated enhanced harvesting of visible light and therefore demonstrated efficient catalytic activity toward the degradation of organic dyes under the irradiation of visible light as compared to bare TiO₂ spheres.     

Development of TiO<Subscript>2</Subscript> photocatalysts suitable for practical use and their applications in environmental cleanup

Recently, environmental disruption is proceeding on a global scale through the consumption of huge amounts of fossil fuels and the emission of various chemical substances. However, these substances resist bio-treatment. TiO₂ generates electrons and holes by irradiation with light. Most organic micro-pollutants, including dioxins, are decomposed into carbon dioxide and water by the effect of the holes with high oxidative potential. By using such a photocatalytic reaction, various applications are feasible for environmental cleanup. In general, TiO₂ powder has been utilized as photocatalyst, although TiO₂ powder photocatalyst has several disadvantages: (1) it is difficult to handle, (2) photocatalytic reaction is slow and it takes a lot of time for treatment and (3) it is difficult to apply to plastics and textiles, because the photocatalyst decomposes them. We have developed a photocatalyst suitable for practical use and have developed high-activity photocatalysts such as TiO₂ photocatalytic transparent film, photocatalytic silica-gel, apatite-coated TiO₂ photocatalyst usable for plastics and textiles, photocatalytic paper, photocatalytic blue charcoal and photocatalytic oxygen scavenger. The application of these high-activity photocatalysts has been studied in deodorization, anti-bacterial, self-cleaning, anti-stain, water treatment, air purification such as photocatalytic decomposition of dioxins and VOC, and NO _x removal. Now various photocatalytic articles using these new photocatalyst materials are on the market in Japan. Photocatalytic technology can create many valuable products for environmental use all over the world.     

Formation of different products during photo-catalytic reaction on TiO<Subscript>2</Subscript> suspension in water with and without 2-propanol under diverse ambient conditions

Studies on photo-catalytic reduction of CO₂ using TiO₂ photo-catalyst (0.1%, w/v) as a suspension in water was carried out at 350 nm light. CO₂ from both commercially available source, as well as generated in situ through 2-propanol oxidation, was used for this study. The photolytic products such as hydrogen (H₂), carbon monoxide (CO) andmethane (CH₄) generated were monitored in TiO₂ suspended aqueous solution with and without a hole scavenger, viz., 2-propanol. Similar photolytic experiments were also carried out with varying ambient such as air, O₂, N₂ and N₂O. The yields of CO and CH₄ in all these systems under the present experimental conditions were found to be increasing with light exposure time. H₂ yield in N₂-purged systems containing 2-propanol was found to be more as compared to the without 2-propanol system. The rate of H₂ production in N₂-purged aqueous solutions containing 0.1% TiO₂ suspension were evaluated to be 0.226 and 5.8 μl/h, without and with 0.5 M 2-propanol, respectively. This confirmed that 2-propanol was an efficient hole scavenger and it scavenged photo-generated holes (h⁺), allowing its counter ion, viz., e⁻, to react with water molecule/H⁺ to yield more H₂. The formation of both CO and CH₄ in the photolysis of CO₂-purged aqueous solutions containing suspended TiO₂ in absence of 2-propanol reveal that the generation of CH₄ is taking place mainly through CO intermediate. In presence of air/O₂, the yield of H₂ in the system without 2-propanol was observed to be negligible as compared to the system containing 2-propanol in which low yield of H₂ was obtained with a formation rate of approx. 0.5 μl/h.     

光催化剂Sm2FeSbO7的制备及光物理和光催化性能表征

首次采用固相反应法制备了新型光催化剂Sm₂FeSbO₇,有效地降解了水中有机污染物。利用X射线衍射、扫描电镜、X射线光电子能谱、傅里叶变换红外光谱、透射电子显微镜和紫外－可见光谱仪对Sm₂FeSbO₇的结构和光催化性能进行了表征。Sm₂FeSbO₇为烧绿石型结构,立方晶系和空间群Fd3m结晶。Sm₂FeSbO₇的晶格参数a为1.035 434 nm。Sm₂FeSbO₇的带隙经估算为2.46 eV。用Sm₂FeSbO₇作为光催化剂在可见光照射下降解靛蓝胭脂红,并与氮掺杂TiO₂对比。结果表明,与掺氮TiO₂相比,Sm₂FeSbO₇在可见光照射下光催化降解靛蓝胭脂红显示出较高的光催化活性。总有机碳的减少,无机产物的逐渐形成,SO₄^2-和NO₃^-以及CO₂的演变揭示了在光催化过程中靛蓝胭脂红的连续矿化。检测了一些来自光催化降解靛蓝胭脂红的中间体,如邻硝基苯甲酸和邻硝基苯甲醛,并获得了可能的靛蓝胭脂红光催化降解路径。