Steric and electrostatic effects in dye-cellulose interactions by the MTD and CoMFA approaches

This paper presents the application of the MTD (minimal steric difference) analysis and CoMFA (comparative molecular field analysis) to series of anthraquinone vat, mono and disazo and disperses dyes with known affinities for cellulose fiber. A comparison of the results demonstrates that these methods usually agree with the prediction of structural features favorable for dyeing. A series of n = 49 anthraquinone vat dyes was studied by MTD with r2 between 0.903 and 0.941 and r2CV values in the range of 0.827-0.878. For CoMFA, r2 = 0.992, r2CV = 0.841 were obtained; the CoMFA field is in rather good agreement with vertex attributions, by MTD for attractive and repulsive vertices. Anionic disazo dyes were studied by the CoMFA method (n = 21, r2 = 0.999, r2CV = 0.703). Monoazo dyes (several series) were studied by CoMFA and MTD. The effect of lipophilicity on dye fiber affinity was, also, studied for these dyes. Disperse dye adsorption was analyzed by MTD and CoMFA (n = 27, r2 = 0.925, r2CV = 0.776). Conclusions refer to the effect of structural features of dye molecules upon adsorption on cellulose fibers.     

偕胺肟合铁(Ⅲ)纤维对还原棕BR染料的吸附

采用部分偕胺肟化的聚丙烯腈纤维与铁离子反应,形成偕胺肟合铁(Ⅲ)纤维,以此为吸附材料,吸附水溶液中的还原棕染料. 研究了其吸附反应条件、吸附规律及吸附反应动力学. 结果表明,pH值11.5～12.5、温度60 ℃和吸附时间60 min为最佳吸附反应条件. 偕胺肟合铁(Ⅲ)纤维对还原棕的吸附反应符合Langmuir方程和Freundlich等温吸附经验式. 采用不同初始浓度研究吸附时间与溶液浓度的关系,用微分法确定了反应级数和反应速率常数. 由不同温度下的速率常数,并结合Arrhenius方程求出了反应的活化能. 结果表明,偕胺肟合铁(Ⅲ)纤维对还原棕的吸附符合一级反应动力学特征,速率方程c=c_0e~(-kt),速率常数k=32.01e~(-E_a/RT),活化能E_a=11.55 kJ/mol.     

Generation of redox systems by fiber materials on the reduction of vat and sulfur dyes: Research and practical implementation

An essential part of the processes of refinement of textile materials from natural cellulose fiber is based on redox reactions of the components of process solutions both with admixtures in the fiber and with cellulose. The reducing agents involved in these processes are used in the alkaline treatment of textile materials as antioxidants whose function is to prevent oxidative destruction of cellulose; reducing agents are also introduced into vat or sulfur dye compositions to convert these insoluble dyes into soluble leuco compounds.     

Understanding adsorption phenomena: investigation of the dye-cellulose interaction

To understand the structural factors that control the adsorption of acid dyes onto cotton (cellulose), the adsorption of 15 acid dyes from water has been studied. An equilibrium exists between dye adsorbed in the cotton and dye in solution, and by measurement of the temperature dependence (277-333K) of the equilibrium constant, the enthalpy and entropy of binding are obtained. For most dyes adsorption is driven by the binding enthalpy, which is ascribed to van der Waals forces. Acid dyes consist of an aromatic core with peripheral solubilizing groups (generally sulfonates). Dyes in which the sulfonates are on one side of the molecule have the largest binding enthalpy. Assuming a binding geometry where the sulfonates protrude into water pools in the bulk amorphous regions and as much as possible of the dye core touches the surface, then a good correlation exists between the binding enthalpy and the summation of 1/r(6) over all the C, N, and O dye atoms, where r is the distance of each atom from the cellulose surface.     

Surface characterization of stepwise oxidized spruce thermomechanical pulp samples by different analytical methods

An investigation of the fiber samples with various amounts of lignin, hemicelluloses and cellulose was conducted by means of dye adsorption, spectrometric and chemical analyses. Five fiber samples were prepared by the oxidation of unbleached Norway spruce thermo-mechanical pulp with acidic potassium permanganate solution. Each sample was oxidized with defined amount of KMnO₄ and the degree of oxidation was determined as kappa number. Fibers were additionally characterized by conductometric titration, the determination of hemicelluloses and infrared spectrometry. Sorption of various types of dye, namely Methylene Blue (MB), Crystal Violet (CV) and Astra Blue (AB) on the fiber surface was studied and compared to the kappa number and other fiber characteristics. The adsorption of MB and CV is found to follow the amount of anionic (carboxylic) groups, which at first increase and later decrease toward the final stages of oxidation. The behavior of AB is nearly the opposite, its adsorption increases with the depletion of lignin and carboxylate groups, pointing to a different mechanism of AB binding on fibers.     

Multilinear regression and comparative molecular field analysis (CoMFA) of azo dye-fiber affinities. 2. Inclusion of solution-phase molecular orbital descriptors

For a data set with 30 direct azo dyes taken from literature, quantitative structure-activity relationship (QSAR) analyses have been performed to model the affinity of the dye molecules for the cellulose fiber. The electronic structure of the compounds was characterized using quantum chemical gas-phase (AM1) and continuum-solvation molecular orbital parameters. As regards the solution phase, COSMO appears to be better suited than SM2 in quantifying relative trends of the aqueous solvation energy. For the dye-fiber affinity, the leave-one-out prediction capability of multilinear regression equations is superior to CoMFA, with predictive squared correlation coefficients ranging from 0.63 (pure CoMFA) to 0.89. At the same time, solution-phase CoMFA is superior to previously derived AM1-based CoMFA models. As a general trend, the dye-fiber affinity increases with increasing electron donor capacity that corresponds to an increasing hydrogen bond acceptor strength of the azo dyes. The discussion includes the consideration of structural features that are likely to be involved in dye-fiber and dye-dye hydrogen bonding interactions, and possible links between CoMFA electrostatic results and the atomic charge distribution of the compounds.     

Theoretical investigation of azo dyes adsorbed on cellulose fibers: 1. Electronic and bonding structures

Structural, bonding and electronic characteristics of complexes of anthraquinone and 1-arylazo-2-naphtol dyes and cellulose I _β are studied using B3LYP density functional method with 6-31G** basis set based on the partially and fully optimized structures. Results reveal that for both partially and fully optimized complexes, there is a stabilizing attraction between dyes and cellulose surface. The hydrazone (Hy) tautomer in anionic state (Hy–SO₃ ^?) shows the strongest interaction with the cellulose surface. Natural bond orbital (NBO) and atoms-in-molecules (AIM) analyses have been carried out to study the nature of azo dyes-cellulose bonds in detail. According to NBO analysis, a remarkable charge transfer occurs between the –SO₃ ^? and –SO₃H functional groups of the dye and the cellulose surface which can be regarded as the main source of the large dye–cellulose interaction energy. AIM analysis confirms the existence of hydrogen and van der Waals bonds between the azo dyes and cellulose. Furthermore, a very good agreement is observed between the number of hydrogen bonding sites and dye–cellulose interaction energies.     

Acid/Base Properties and Adsorption of an Azo Dye on Coating Pigments

Adsorption of an anionic disazo dye, Food Black 2 on coating pigments from polar solvents was studied. Pigments (kaolin, precipitated CaCO₃, amorphous SiO₂, TiO₂, Al₂O₃, and talc) were chosen to be representative of those used in paper for ink‐jet printing. The predominating driving force for the adsorption was electrostatic interactions for all the pigments except talc, for which hydrophobic interactions were dominant. Lewis acid‐base properties of the pigments were studied by measuring adsorption of Lewis acid‐probe molecules from both polar and nonpolar media. The pigments studied were found to be amphoteric, containing both acidic and basic surface groups. However, in the presence of polar solvents, the adsorption of acid‐base probe molecules was greatly reduced, which indicates that Lewis acid‐base interactions have only a small influence on the adsorption of azo dyes from polar media such as water.     

Effect of Humic Acids on the State of Disperse,Acid, and Vat Dyes in Aqueous Solutions

Effect of humic acids (biopolymeric compounds of anionic type recovered from peat) on the state of disperse, acid, and vat dyes in aqueous solutions was studied; vat dye was studied in the form of water-soluble sodium salt of leuco acid.     

Decolourization of vat dyes on cotton fabric with infrared laser light

A method for the decolourization of coloured cotton fabric dyed with vat dyes, based on exposure to infrared laser light, has been tested. Pulsed CO₂ laser has been used for all experiments. To detect changes in colour shade, reflection data of original and dyed cotton irradiated at various fluency of infrared laser light were measured on a UV–VIS spectrophotometer, and then colour intensity was calculated for each vat dye. To observe changes in chemical composition and morphology of fiber surfaces, an analysis was performed by X-ray photoelectron spectroscopy and scanning electron microscopy due to thermal effects. Thermal stability of vat dyes and cotton fabric was determined with differential scanning calorimetry method to simulate the heating process during exposure of samples to the infrared laser irradiation.     

Anthraquinone and Azo Dyes in Dyeing Processes of PET Films and PET Knitted Fabrics Using Supercritical CO2 Medium

Summary: Dyeing processes using supercritical fluid present advantages over the conventional dyeing process using aqueous medium. Previous works from our group on polymeric fibers such as N,N-dimethylacrylamide (DMAAm) modified poly(ethylene terephthalate), PET, showed higher sorption of disperse dyes in supercritical medium. Furthermore, recent studies showed that the association of UV radiation and DMAAm treatment leads to a better incorporation of dyes in modified PET soaked in aqueous medium. In this work, modified and non-modified PET knitted fabrics (KF) were dyed in supercritical CO₂ medium. Azo and anthraquinone dyes were used in order to compare the extent of incorporated dye in PET films and PET KF in supercritical CO₂. The dyeing process variables were studied by factorial design and by a response surface methodology (RSM) technique. The anthraquinone dye presented a better incorporation in PET than the azo dye. The UV light exposure and the dyeing times inputs showed positive main effects in the incorporation of dyes in PET films and PET KF. From the RSM data, DMAAm and UV light modified PET KF presented 7.43 mg of incorporated azo dye by g of PET if the optimized dyeing conditions, time: 135 min and pressure: 212 bar would be used. In the respective optimized dyeing conditions for the anthraquinone dye, time 150 min and pressure 229 bar, the incorporated dye would be 22.9 mg of dye by g of PET.     

Application of sulphanilamides disazo dyes with Tropaeolin O for simple, rapid and sensitive spectrophotometric assay of medicines

A rapid, simple and sensitive spectrophotometric method for the determination of some sulphanilamides is described. The method is based on the formation of blue coloured disazo dyes by the diazotization of sulphonamides viz. sulphanilamide (SA), sulphamerazine (SMR), sulphamethazine (SMZ), sulphadimethoxine (SDM), sulphamethoxazole (SMX), sulphadiazine (SDA), sulfathiazole (STZ), sulphaguanidine (SGN), sulphamonomethoxine (SMM), sulphamethoxypyridazine (SMP) in 0.5M hydrochloric acid media at ice bath followed by the azocoupling reaction with acid monoazo dye Tropaeolin O (TrO) at pH=10.5. Formed products are stable for 10h at room temperature. Effective molar absorptivities at absorbance maxima 595nm for disazo dyes were ～10(4)M(-1)cm(-1). Stoichiometric ratios of the components of disazo dyes were determined by means of mole ratio and continuous variations methods. Linear ranges for sulphanilamides determination were 0.4-14.0μgml(-1). The methods were successfully approved at suphanilamides determination in model solutions and commercial pharmaceutical preparations.     

Automated extraction of direct,reactive, and vat dyes from cellulosic fibers for forensic analysis by capillary electrophoresis

Systematic designed experiments were employed to find the optimum conditions for extraction of direct, reactive, and vat dyes from cotton fibers prior to forensic characterization. Automated microextractions were coupled with measurements of extraction efficiencies on a microplate reader UV–visible spectrophotometer to enable rapid screening of extraction efficiency as a function of solvent composition. Solvent extraction conditions were also developed to be compatible with subsequent forensic characterization of extracted dyes by capillary electrophoresis with UV–visible diode array detection. The capillary electrophoresis electrolyte successfully used in this work consists of 5 mM ammonium acetate in 40:60 acetonitrile–water at pH 9.3, with the addition of sodium dithionite reducing agent to facilitate analysis of vat dyes. The ultimate goal of these research efforts is enhanced discrimination of trace fiber evidence by analysis of extracted dyes. Figure Fitted absorbance response surface for extraction of a direct dye, C. I. yellow 58, using a ternary solvent system.     

非肽类凝血酶抑制剂的比较分子力场分析

在血栓症和止血疗法中凝血酶起重要的生物调节作用，凝血酶抑制剂由于基溶 血栓作用成为药物设计的热点，对非肽类芳基磺酸酯系列凝血酶抑制剂进行了三维 定量构效关系研究。用Autodock方法和比较分子力场分析相结合构建了该类分子的 定量构效关系模型，得到三维等值线图。模型的传统相关系数r~2=0.956，交叉验 证系数q~2=0.681, F_(4,16) = 85.985，标准偏差S = 0.158。该模型为凝血酶抑 制剂的进一步结构改造提供了有益的启示。     

Multimodal sorption of nonionic dyes with two amino groups by various polymers from water

Sorption isotherms of nonionic dyes with two amino groups (one anthraquinone dye and two azo dyes) on various polymers from water were measured at 40–90°C (Nylon-6 and cellulose film) and at 95°C (polyester microfiber). The isotherms were curved, convex to upward, in the range of low dye concentration C_s in water and almost linear in the range of medium to saturated C_s. The isotherms measured at low temperature (40°C for cellulose, 40–60°C for Nylon-6, and at 95°C for polyester) were satisfactorily described by considering three concurrent modes of sorption. They are Nernst type partitioning and bimodal Langmuir sorption (sorption by the higher affinity sites with a small saturation value and that by the lower affinity sites with a large saturation value). However, for the sorption of the anthraquinone dye and one azo dye by Nylon-6 film at high temperature (80–90°C), the amount of dye sorbed by the high affinity site decreased to negligibly small. Accordingly, the isotherms were expressed well by simple dual-sorption model. © 1995 John Wiley & Sons, Inc.     

Über siliciumaromatische Verbindungen. III. Trimethylsilyl- und Triphenylsilyl-substituierte Farbstoffe der Anthrachinonreihe

The influence of the presence of trimethylsilyl and triphenylsilyl groups in substituents of anthraquinone on the properties of anthraquinone vat, acid, and dispersion dyes was investigated.     

FAB mass spectrometry of sulphonated dyes. Application to water analysis

Summary Several commercial dyes (nitro, azo, disazo, trisazo, oxazine and anthraquinone) ranging from mono to trisulphonated compounds were analyzed by fast atom bombardment (FAB) mass spectrometry. Glycerol and dithiothreitol + dithioerythritol (51) gave the best results for the analysis of these dyes and their additives, respectively. (M + Na)⁺ ions, cleavage of azo groups, loss of sulphonate from (M + H)⁺ or (M + Na)⁺ ions were the fragments most commonly observed. Detection limits of some dyes spiked to real water extracts in order to evaluate its potential application to the identification of organic pollutants in water are reported.

---

FAB-Massenspektrometrie von sulfonierten Farbstoffen. Anwendung in der Wasseranalyse