Er∶LaAl3(BO3)4晶体的生长和光谱性质研究

采用助熔剂法生长了Er: LaAl3(BO3)4晶体.LaAl3(BO3)4晶体属正交晶系,晶胞参数a=0.93586(4) nm,b=0.79904(3) nm,c=0.43626 (6) nm,V=0.34595 nm3.测量了晶体在室温的吸收光谱和荧光光谱.该晶体吸收光谱能级丰富;在1533 nm波长处有较强的荧光光谱,对应于4I13/2→4I15/2的能级跃迁;晶体的荧光寿命为2.72ms.研究了晶体的热学性质,室温时的比热容大约为0.595 J/g·℃.     

2.7μm激光晶体Yb,Er,Ho∶GSGG的生长与光谱性能研究

用提拉法成功生长出了Yb,Er,Ho∶ GSGG晶体,对其光谱性能进行了研究.测量了晶体在320～3000 nm波段内的吸收光谱.用970 nm激光激发,测量了晶体的稳态和瞬态荧光光谱,拟合得到2.7～3 μm激光上下能级寿命,用F-L公式计算了晶体的发射截面.与Er∶ GSGG和Yb,Er∶ GSGG晶体的光谱参数进行了比较,结果表明,Yb,Er,Ho∶GSGG是一种更适合LD泵浦,实现低阈值、高效率2.79 μm激光输出的新型激光晶体.     

矾山磷矿石的结构分析与矾山磷矿石晶体的发光性能研究

本文采用X射线衍射、电子探针、扫描电镜等测试手段,对矾山磷矿石及其所含磷灰石和云母单矿物晶体进行了组成与结构的分析,并采用jade5软件计算了磷灰石及云母的晶体化学式.通过分析矾山磷灰石的荧光光谱,初步研究了其发光性能.结果表明:矾山磷矿石样品主要由磷灰石及镁黑云母晶体组成.所含磷灰石为氟磷灰石,晶胞参数为:a=0.940 nm,c=0.689nm,该矿物晶体有发光性能,其发光性能与其所含Ce元素有关.所含云母为镁黑云母,晶胞参数为:a=0.534 nm,b=0.927 nm,c=1.024 nm,β=100.092°.     

高温超导衬底材料SrLaAlO4晶体的生长及特性

用提拉法生长了不开裂的高温超导衬底材料SrLaAlO4晶体,晶体尺寸为(25～30)mm×(50～60)mm.该晶体具有K2NiF4型结构,晶格常数为a=0.375nm,c=1.263nm.生长的晶体颜色随着生长时炉膛内氧气氛的含量的增加而逐渐加深.测量了晶体的室温下的介电常数及介电损耗分别为20及8×10-4.     

Na3La2(BO3)3晶体生长及光谱特性

本文以起始摩尔比为1:1的Na2CO3:H3BO3,并添加5;质量分数的NaF为助熔剂,用顶部籽晶法生长出φ35mm×5mm的透明Na3La2(BO3)3单晶.该晶体属正交晶系,空间群:Amm2,晶胞参数为a=0.51580(10)nm,b=1.1350(2)nm,c=0.73230(15)nm,α=β=γ=90°.测量了Na3La2(BO3)3晶体在室温下的透过光谱,紫外截止波长约为200nm.该晶体常温下稳定,不吸潮,但却易溶于稀酸.     

Nd∶NaY(WO4)2激光晶体生长

采用提拉法生长出了四方晶系白钨矿结构的Nd:NaY(WO4)2(简称Nd∶NYW)激光晶体,尺寸为20mm×30mm.通过TG-DTA差热分析得到晶体的熔点为1211℃,从XRD分析得到晶胞参数为a=b=0.5212nm ,c=1.1268nm ,晶胞体积V=0.3062nm3.讨论了Nd∶NYW晶体的生长工艺,给出了晶体生长的最佳工艺参数.通过比较Nd∶NaBi(WO4)2(简称Nd∶NBW)和Nd:NYW的XRD、红外光谱和拉曼光谱测试结果,认为二者结构基本相同,为四方晶系白钨矿结构、I(4)空间群.     

2.1μm激光晶体Cr,Tm,Ho∶YAG的生长、光谱和激光性能

采用提拉法成功生长出了优质的Cr,Tm,Ho∶ YAG晶体,并对其光谱及激光性能进行了研究.测量了晶体在350～2700 nm波段内的吸收光谱.用450 nm激光激发,测量了晶体的稳态和瞬态荧光光谱,拟合得到2.1 μm激光上能级的寿命为10.65 ms.用F-L公式计算了晶体在2.1 μm处的发射截面为6.92×10-20 cm2,并与其他Ho3+掺杂的激光晶体进行了对比.采用氙灯泵浦Cr,Tm,Ho∶ YAG晶体棒,实现2.1 μm的脉冲输出.在3 Hz和10 Hz时的激光阈值分别为33.11 J和33.88 J,斜效率均为4.5;,比市售成熟的激光棒的激光输出效率更高.     

非线性光学晶体Ba2B5O9Cl的合成、晶体生长及性能的研究

首次以LiF-H3BO3为助熔剂,用顶部籽晶法,生长出尺寸为12 mm×13mm×5mm的Ba2B5O9Cl透明单晶.通过热性能分析证实该晶体为非同成分熔融化合物,属于正交晶系,空间群Pnn2,晶胞参数为a=1.1576(2) nm,b=1.1619(2)nm,c =0.66874(13) nm,V=0.8994(3) nm3,Z=4.该晶体中含有BO3和BO3基团,具有三维网状的晶体结构.Ba2B5O9Cl粉末的非线性光学效应约为KDP的3.5倍,同时还进行了红外、漫反射光谱性能的研究.     

Nd3+:CaLa2B10O19晶体的生长和性质研究

用泡生法生长出不同Nd3+掺杂浓度的Nd3+:CaLa2B10O19(NLCB)晶体,测试了晶体的透射光谱、荧光光谱、倍频效应等性质.NLCB晶体在580nm和805nm处有很强的吸收,能与二极管激光器有效耦合.在900nm和1.06μm处各有一荧光峰,1.06μm处的荧光寿命为75μs.NLCB的粉末倍频效应为KDP的2倍.     

钨酸铅闪烁晶体垂直梯度凝固法生长及光学性能研究

本文报道了垂直梯度凝固法(VGF)生长PWO晶体的研究结果.通过优化工艺参数,成功获得直径25mm、长度140mm的PWO晶体.通过测试PWO晶体的XRD、透过光谱、荧光光谱等,研究了所得晶体的光学性能.结果表明:VGF法生长PWO晶体在350～420 nm处的光学透过率明显提高,荧光发光主峰位于435 nm,是快发光峰,但慢发光比例有所增加.     

CsI-LiCl共晶材料的坩埚下降法生长与闪烁性能研究

本文采用坩埚下降法,在真空密封的石英坩埚中成功生长出CsI-LiCl与CsI-LiCl:Na共晶闪烁体。通过扫描电子显微镜(SEM)观察晶体微结构表明该共晶中LiCl相与CsI相存在周期性的层状排列,CsI相的厚度在5 μm左右。共晶样品的X射线激发发射谱显示在CsI-LiCl和CsI-LiCl:Na共晶样品存在缺陷发光,在CsI-LiCl样品中还观察到了纯CsI的自陷激子(STE)发光。CsI-LiCl样品在α粒子激发下的多道能谱中观察到明显的全能峰,这一结果证明CsI-LiCl共晶可用于热中子探测的潜力。     

静电纺丝法制备CeO2微纳米纤维及其除氟性能

以聚丙烯腈(PAN)为载体,六水合硝酸铈[Ce(NO₃)₃·6H₂O]为原料,采用静电纺丝法制备了Ce(NO₃)₃/PAN纤维,在空气中热处理得到CeO₂微纳米纤维,通过XRD、BET和SEM对CeO₂微纳米纤维进行表征。采用静态吸附实验探讨了CeO₂微纳米纤维去除水溶液中氟离子的性能,考察了溶液pH值、初始氟离子浓度及共存阴离子等对吸附性能的影响。结果表明,pH=3时,CeO₂微纳米纤维对F^-的吸附性能最佳,CeO₂吸附量随着F^-浓度的增大呈上升趋势。CeO₂微纳米纤维对F^-的吸附等温线遵循Langmuir模型,二级动力学模型能很好地描述CeO₂微纳米纤维对F^-的吸附过程。CeO₂微纳米纤维的除氟性能优良,可为其实际应用提供理论参考。     

X-ray analysis of sideroxol from <Emphasis Type="Italic">Sideritis leptoclada</Emphasis>

Sideroxol (1), a kaurane diterpene which has the ent-7α,18-dihydroxy-15β,16β-epoxykaurane structure (MW = 320.47, C₂₀H₃₂O₃) was obtained from the acetone extract of Sideritis leptoclada plant as well as from some other Sideritis species. It crystallizes in the orthorhombic space group P2₁, 2₁, 2₁ with a = 10.967(3), b = 24.555(5), c = 6.372(4) Å, Dc = 1.240 g cm⁻³, Z = 4, and refines to R = 0.065 for 721 independent reflections. The skeleton consists of three fused six-membered rings and a five-membered ring with fused epoxide. The six membered rings exhibited slightly distorted chair conformation. In addition to sideroxol, two kaurane and five kaurene diterpenes were isolated from the hexane and acetone extracts of the studied plant.     

New zeotype borophosphates with chiral tetrahedral topology: (H)0.5M1.25(H2O)1.5[BP2O8]·H2O (M = Co(II) and Mn(II))

Two new isostructural open‐framework zeotype transition metal borophosphate compounds, (H)_0.5M_1.25(H₂O)_1.5[BP₂O₈]·H₂O (M = Co(II) and Mn(II)) were synthesized by mild hydrothermal method. The structure of compounds were characterized by single‐crystal X‐ray diffraction which have ordered, alternating, vertex‐sharing BO₄, PO₄, and (MO₄)OM(H₂O)₂ groups with hexagonal, P 6₁ 2 2 (No 178) space group and unit cell parameters for Co a = 9.4960(6) Å, c = 15.6230(13) Å, for Mn a = 9.6547(12) Å, c = 15.791(3) Å, Z = 1 for both of them. TGA/DTA analysis, IR spectroscopy were used for characterization. Magnetic susceptibility measurements for both of the compound indicate strong antiferromagnetic interaction between metal centers. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photoluminescence characteristics of Mg- and Si-doped GaN thin films grown by MOCVD technique

We have studied the optical, structural and surface morphology of doped and undoped GaN thin films. The p- and n-type thin films have been successfully prepared by low-pressure MOCVD technique by doping with Mg and Si, respectively. The different carrier concentrations were obtained in the GaN thin films by varying dopant concentrations. Photoluminescence (PL) studies were carried to find the defect levels in the doped and undoped GaN thin films at low temperature. In the undoped GaN thin films, a low intensity and broad yellow band peak was observed. The donor–acceptor pair (DAP) emission and its phonon replicas were observed in both the Si or Mg lightly doped GaN thin films. The dominance of the blue and the yellow emissions increased in the PL spectra, as the carrier concentration was increased. The XRD and SEM analyses were employed to study the structural and surface morphology of the films, respectively. Both the doped and the undoped films exhibited hexagonal structure and polycrystalline nature. Mg-doped GaN thin films showed columnar structure whereas Si-doped films exhibited spherical shape grains.     

Solubility of Ag2O into the Na2O–B2O3–Al2O3 system

The solubility of Ag₂O was measured for the Na₂O–B₂O₃ and Na₂O–B₂O₃–Al₂O₃ system with the rotating crucible method and static method, respectively, under air atmosphere at temperatures ranging from 1273 to 1423 K. The contamination of melts from crucibles could be avoided by the rotating crucible method, with which it became possible to measure the solubility of Ag₂O for the Na₂O–B₂O₃ system above the melting point of Ag for the first time. It was found that the addition of Na₂O decreases the solubility of Ag₂O while the addition of Al₂O₃ had little effect on the solubility. The effect of Na₂O and Al₂O₃ on the solubility of Ag₂O is expressed by interaction coefficients and is analyzed in terms of the basicity of melts. The solubility of Ag₂O in Na₂O–B₂O₃–Al₂O₃ melts increased with increased temperature. This phenomena was explained by a small enthalpy change in oxidation of silver.     

Considerations on the structure and physical properties of B2O3-SiO2 and GeO2-SiO2 glasses

Data of density, refractive index and thermal expansion coefficient for B₂O₃-SiO₂ and GeO_2-SiO₂ glasses have been analyzed. The volumes of the structural units are the same found for the vitreous B₂O₃, GeO₂ and SiO₂. The volume of any structural unit is constant over the entire composition region of the glass system. The same has been found for the differential refraction and unit refraction of the structural units in these glasses. Different features are observed for the differential expansion of the structural units. There is a considerable change with composition in the differential expansion of BO₃, GeO₄ and SiO₄ units. The effect is attributed to a change in the asymmetry of vibrations with the number of Si-O-B or Si-O-Ge linkages in the matrix. The thermal expansion coefficient is mainly determined by the contribution of B₂O₃ or GeO₂ in the concerned glasses.     

Molecular structure and crystal packing of uncomplexed 1,6-bis(N-cyano-p-methoxy-anilino)-2,4-hexadiyne, C22H18N4O2

The X-ray crystal structure of 1,6-bis(N-cyano-p-methoxy-anilino)-2,4-hexadiyne, C₂₂H₁₈N₄O₂, is determined. The crystal packing is dominated by phenyl stacking interactions. Weak C–H···N hydrogen bonds help align the molecules. C–H··· hydrogen bonding is not apparent.     

Structural and electrical properties of vapour phase grown Cd1 − xFexTe single crystals

Cd_1 − xFe_xTe single crystals were prepared by vapour phase growth method in the composition range of 0 ≤ x ≤ 0.03. Chemical analysis, surface morphology, structural investigations and electrical properties were carried out by EDAX, SEM, XRD, TEM and transport technique, respectively. Microscopic variations between the target and actual compositions were noticed. Morphology studies revealed that dislocation aided growth is active in the present crystals. TEM and XRD studies confirmed that the samples of all compositions crystallized in zinc blende structure, and the lattice parameters varied almost linearly decreases with Fe content. At room temperature, the resistivity of the Cd_1 − xFe_xTe crystals of all compositions (x = 0.01, 0.015, 0.02, 0.025 and 0.03) lies in the range of 3.5-6.5 M Ω, the activation energies lie in the range of 63-133 meV, and the samples were show the ‘p’ type conductivity.     

空位浓度对纤锌矿CdS电子结构和光学性质影响的第一性原理研究

本文基于密度泛函理论的平面波超软赝势方法,采用第一性原理研究了含Cd空位缺陷CdS和含S空位缺陷纤锌矿CdS的几何结构、能带结构、电子态密度及光学性质。通过计算分析可知,含Cd空位缺陷的CdS体系均为p型半导体,含S空位缺陷的CdS体系跃迁方式均由直接跃迁变为间接跃迁。Cd、S空位缺陷的CdS体系的态密度总能量降低。空位CdS体系相较于本征CdS体系的静介电常数均有提高,并随着空位浓度的增大而增大,Cd空位缺陷体系更为明显,极化能力得到显著提升。空位Cd的CdS体系相较于本征CdS体系在红外波段存在明显的吸收,空位S的CdS体系相较于本征CdS体系在可见光波段存在明显的吸收。