大尺寸近化学计量比铌酸锂晶体的制备

研究了扩散法制备近化学计量比铌酸锂晶体的工艺,从原料配比、合成方式、晶片放置方式和扩散工艺等方面进行了工艺优化.对不同厚度和切割方向的铌酸锂晶体进行扩散处理,对三英寸Z-cut铌酸锂晶体进行了批量扩散试验,并对扩散后的晶体进行了组分和均匀性测试.结果表明,厚度为3.1 mm的Z-cut晶体组分达到近化学计量比,光学质量达到实用化要求,而XYZ=5.1 mm×5.1 mm×21.0 mm的晶体光学质量较差,同时厚度达1.8mm的Z-cut三英寸近化学计量比铌酸锂晶片可实现批量制备.     

近化学计量比掺镁铌酸锂晶体的抗光折变性能

应用气相传输平衡技术,我们获得了3种近化学计量比掺镁铌酸锂晶体,晶体的掺镁量接近我们以前提出的第二阈值.在我们实验室所能达到的最大光强26 MW/cm2照射下,在所有近化学计量比掺镁铌酸锂晶片中没有观察到光斑畸变,该光强比同成分铌酸锂晶体所能承受的光强高6个量级,为目前已报道的铌酸锂晶体之最.应用双光束全息写入法测得掺1.0 mol; Mg近化学计量比铌酸锂晶体的光折变饱和值仅有4.6×10-7,比同成分铌酸锂晶体小两个量级,从已有实验数据推测,该晶体的抗光折变能力应当比同成分铌酸锂晶体高9个量级以上.     

同成分铌酸锂晶体中反位铌的扩散研究

通常商业使用的同成分铌酸锂晶体(CLN)是固液同成分共熔点配比,其Li2O含量约为48.6mol;,晶体中存在大量的锂空位和反位铌等本征缺陷,进而影响了晶体的电光系数、折射率、光折变等性能.研究表明,将缺锂的晶体在高温、富锂气氛下进行扩散处理可获得接近化学计量配比的铌酸锂晶体(nSLN),这种方法获得的nSLN晶体光学质量高,且技术简便、成本低,具有实际应用价值.本文分析了富锂气氛下CLN晶体扩散过程中反位铌的扩散机制和扩散路径,认为反位铌在扩散过程中将迁移到晶体外部,并通过CLN晶片的单边扩散进行了验证.     

8英寸铌酸锂晶体生长研究

铌酸锂单晶薄膜(LNOI)在新一代信息技术中关键通信器件领域的作用日益显著,随着铌酸锂单晶薄膜制备技术和光子集成技术的发展,降低芯片成本、增加芯片集成度是光子集成芯片永恒不变的发展方向,因此迫切需求大尺寸铌酸锂晶体。本文讨论了大尺寸坩埚中熔体自然对流随着液面下降的变化规律,研究了8英寸(1英寸=2.54 cm)铌酸锂Z轴、X轴两个提拉方向的生长特点,获得等径尺寸大于φ210 mm×50 mm的8英寸Z轴、X轴铌酸锂晶体。1 mm厚X轴铌酸锂晶圆的透过率显示波长380～3 300 nm光谱的透过率超过了70%,晶片纹影图像显示晶体中存在折射率脉理缺陷。     

富锂熔体中提拉法生长近化学计量比铌酸锂(LiNbO3)晶体

利用提拉法,在富锂(Li2O∶NbO3=58.5/41.5)熔体中生长了质量良好的近化学计量比铌酸锂单晶,其紫外吸收边位置为308nm,居里温度超过了1200℃.测量了其Z向晶片的压电系数d33,并且观察了Z向晶片的180°畴,结果证明除少数区域外,所生长晶体为单畴.     

用于GaN薄膜生长的γ-LiAlO2晶体基片制备工艺研究

研究了铝酸锂晶体的化学机械抛光工艺.自制了SiO2悬浮液作为抛光剂,主要研究抛光过程中抛盘转速、抛光时间以及抛光压力等系列抛光工艺参数对抛光晶片表面质量的影响规律.通过优化抛光工艺参数获得了适宜制备氮化镓薄膜的铝酸锂晶体基片,最小的表面粗糙度为2.695 nm.结合氮化镓薄膜的制备条件,对抛光好的铝酸锂晶体基片采用退火的方法去除生长态晶体的热应力和机械应力.利用扫描电子显微镜研究了退火后晶片的表面质量,同时用激光共聚焦技术研究了晶体表面腐蚀坑的三维形貌.退火处理导致了铝酸锂晶体表面腐蚀坑的数目和深度增加.随着退火温度的升高和退火的保温时间的增加,铝酸锂晶体中锂元素挥发,晶体表面质量下降.但是适当的保温时间能够改善铝酸锂晶体的完整性,释放在晶体生长和试样制备过程中存在的热应力和机械应力,改善了晶体质量.     

铌酸锂晶体的缺陷及其控制

针对铌酸锂晶体中的缺陷研究,本文总结了国内外学者提出的不同晶体缺陷模型及各自的特点,并介绍了我们提出的铌位依赖、锂位敏感模型.在分析晶体缺陷研究的基础上提出了对铌酸锂晶体进行缺陷控制的意义及理论依据,指出缺陷控制的主要任务是保护锂格位.本文还简要概括了铌酸锂晶体缺陷控制的主要手段,并建议从反映铌酸锂晶体性能的角度来研究缺陷结构.     

铌酸锂晶体的生长研究

近年来,铌酸锂晶体由于其自身所具有的多种优异性能和巨大的应用前景而受到了人们的广泛关注,但生长出满足不同市场要求的高质量铌酸锂单晶体比较困难.本文从晶体生长技术的角度综述了铌酸锂单晶体不同的生长方法以及各自的特点,并分析了在生长铌酸锂晶体时出现的一些问题.     

高掺镁铌酸锂晶体OH-吸收光谱的低温研究

本文测量了纯铌酸锂和高掺镁铌酸锂晶体的低温红外光谱,观察了OH-吸收峰的温度依赖特性.研究发现纯铌酸锂的OH-振动吸收峰基本不随温度而变化,而高掺镁铌酸锂晶体的OH-振动吸收峰的主峰峰位随温度的降低向高波数方向移动.通过分析两种晶体中不同的缺陷模型以及H+在晶格中的占位,我们提出高掺镁铌酸锂晶体中的H+紧邻高电性杂质缺陷(MgNb)3-分布,直接参与缺陷集团,完全不同于纯铌酸锂晶体中H+的分布情形,这造成了高掺镁铌酸锂晶体中OH-振动吸收峰随温度的变化.而集团内部缺陷之间相互作用随温度降低而增强的趋势是OH-振动吸收峰右移的主要原因.     

四价掺杂铌酸锂晶体抗光折变性能研究

我们在同成份铌酸锂晶体中掺入四价离子铪,生长了掺杂浓度分别为2、4、6mol;的掺铪铌酸锂系列晶体.掺铪浓度达到4mol;时,晶体的抗光损伤能力为5×105W/cm2,比同成份纯铌酸锂晶体提高了4个数量级.应用全息法测得掺4、6mol;铪的铌酸锂晶体最大折射率变化为8.7×10-6,与高掺镁(6.5mol;)铌酸锂晶体的类似.晶体的红外吸收谱和紫外-可见光吸收谱也显示,掺杂浓度为4mol;时具有明显的阈值特征.由此可以确定铪离子在铌酸锂晶体中的阈值浓度约为4mol;.     

CsI-LiCl共晶材料的坩埚下降法生长与闪烁性能研究

本文采用坩埚下降法,在真空密封的石英坩埚中成功生长出CsI-LiCl与CsI-LiCl:Na共晶闪烁体。通过扫描电子显微镜(SEM)观察晶体微结构表明该共晶中LiCl相与CsI相存在周期性的层状排列,CsI相的厚度在5 μm左右。共晶样品的X射线激发发射谱显示在CsI-LiCl和CsI-LiCl:Na共晶样品存在缺陷发光,在CsI-LiCl样品中还观察到了纯CsI的自陷激子(STE)发光。CsI-LiCl样品在α粒子激发下的多道能谱中观察到明显的全能峰,这一结果证明CsI-LiCl共晶可用于热中子探测的潜力。     

静电纺丝法制备CeO2微纳米纤维及其除氟性能

以聚丙烯腈(PAN)为载体,六水合硝酸铈[Ce(NO₃)₃·6H₂O]为原料,采用静电纺丝法制备了Ce(NO₃)₃/PAN纤维,在空气中热处理得到CeO₂微纳米纤维,通过XRD、BET和SEM对CeO₂微纳米纤维进行表征。采用静态吸附实验探讨了CeO₂微纳米纤维去除水溶液中氟离子的性能,考察了溶液pH值、初始氟离子浓度及共存阴离子等对吸附性能的影响。结果表明,pH=3时,CeO₂微纳米纤维对F^-的吸附性能最佳,CeO₂吸附量随着F^-浓度的增大呈上升趋势。CeO₂微纳米纤维对F^-的吸附等温线遵循Langmuir模型,二级动力学模型能很好地描述CeO₂微纳米纤维对F^-的吸附过程。CeO₂微纳米纤维的除氟性能优良,可为其实际应用提供理论参考。     

Selinidin: Crystal structure generated by C–H···O, C–H···π and π-π interactions

The title compound, 9,10-dihydro-8,8-dimethyl-2-oxo-2H,8H-benzo[1,2-b:3,4-b']dipyran-9-yl-2-methyl-2-butenoate, C₁₉H₂₀O₅, was isolated from the roots of Selinum vaginatum. The compound crystallizes into monoclinic space group P2 ₁ with unit cell parameters: a = 12.830(2) Å, b = 9.041(1) Å, c = 14.983(1) Å, β = 95.09(1)°, Z = 4. The crystal structure has been determined using direct methods and refined by full-matrix least-squares to a final R value of 0.0529 for 3142 observed reflections. There are two independent molecules, A and B, per asymmetric unit. In both the molecules, the coumarin nucleus is planar. However pronounced differences are observed in the conformation of dihydropyran ring which has a half-chair conformation with an 8β-9α orientation in molecule A and is intermediate between half-chair and sofa in molecule B. Differences also occur in the conformation of the 2-methylbutenoyloxy side chain at C9 due to the different geometry of C–H···π interactions in molecules A and B. Molecules A and B are connected by π–π interactions between their coumarin fragments forming dimers. The dimers interact through C–H···O and C–H···πhydrogen bonds.     

Chromene and Imidazole Based D-π-A Chemosensor Preparation and Its Anion Responsive Effects

We have designed and synthesized the colorimetric chemosensor through the reactions of 2-(4H-chromen-4-yildene)malonitrile and 4-imidazolecarboxaldehyde. Due to its well conjugated D-π-A system and the existence of NH- fragment in structure, we expected that the chemosensor can detect anion using NH- fragment in the imidazole moiety of the structure. In this regard, UV-Vis absorption spectra were measured to investigate sensing properties of the probe toward different anions in DMSO. This chemosensor can detect both fluoride and cyanide ion with absorption change in intensity. In addition, pH sensing property was also investigated upon the addition of hydroxide ion. These properties are related to the deprotonation effect. The ICT system in this molecule was also observed by the computational approach using Material Studio 4.3 package.     

电子显微分析在表征纳米晶体化学组分中的应用

纳米材料的化学组分及含量影响其光、电、声、热、磁等物理性能,电子显微分析是表征纳米晶体化学组分的重要方法之一.本文综述了X-射线能谱(EDS)、X-射线波谱(WDS)、电子能量损失谱(EELS)和选区电子衍射(SAED)等现代电子显微分析技术在表征纳米晶体化学组分、形貌、尺寸和结构等方面的应用及其研究进展,并比较了这些分析方法存在的差异,提出了其应用中存在的不足及今后的研发方向.     

4- and 5-nitroindane

Mononitration of indane produces a mixture of 4- and 5- nitroindanes. Crystallization from mixtures occurs after distillation improves composition of a major component to above 80%. 4-Nitroindane: triclinic, space group (#2),a=7.332(4) Å,b=8.304(4) Å,c=8.358(4) Å, =61.43(4)°, =67.60(4)°, =70.15(4)°,V=405.4(4) ų,Z=2. Non-H-atoms are nearly planar, aliphatic H's are eclipsed. 5-Nitroindane: monoclinic, space groupP2₁/c (#14),a=10.946(8) Å,b=15.643(10) Å,c=9.415(6) Å, =92.34(5)°,V=1611(2) ų,Z=8. Non-H-atoms in the two molecules differ in torsion of the nitro group with respect to indane and fold of the nonbenzylic methylene group. Semiempirical calculations (PM3) suggest that distorsion from planarity may be associated with the two lowest energy vibrational modes. Uv, ir, ms, proton, and¹³C-nmr spectra are correlated with the solid state structures.     

6<Emphasis Type="Italic">S</Emphasis>,8α-Dihydroxy-14,15-Dihydrocarapin (Khayanone) from the Stem Bark of <Emphasis Type="Italic">Khaya Senegalensis</Emphasis> (Meliaceae): Isolation and its Crystal Structure

Khayanone was isolated from the stem bark of African mahogany, Khaya senegalensis (Meliaceae), and characterized as 6S,8α-dihydroxy-14,15-dihydrocarapin on the basis of spectral analysis and single crystal X-ray diffraction study. The compound crystallizes in the tetragonal space group P4 ₁ 2 ₁ 2 with unit cell parameters: a = 13.2315(19) Å, c = 29.118(6) Å, Z = 8. The crystal structure has been solved by direct methods and refined to R = 0.0375 for 4552 unique reflections. The six-membered rings A and B exist in boat conformations, rings C and D in chair conformations, and the furan ring is planar. The crystal structure is stabilized by O-H···O and C-H···O interactions. This is the first report about 6S configuration of mexicanolide revealed by X-ray diffraction analysis. The configuration of oxygenated C-6 in mexicanolide-group limonoids is discussed.     

Nuclear magnetic resonance: a powerful tool to study liquid crystals

Nuclear magnetic resonance (NMR) is a spectroscopic technique widely used to investigate materials and soft matter in particular. In this brief review, the main uses of NMR techniques to investigate different aspects of liquid crystals, such as the orientational and dynamic properties, the supramolecular structure and average molecular conformations, are described. In the second part of the paper, the case study of a ‘de Vries’ liquid crystal is reported and the main results obtained by combining different NMR techniques are discussed.     

X-ray analysis of sideroxol from <Emphasis Type="Italic">Sideritis leptoclada</Emphasis>

Sideroxol (1), a kaurane diterpene which has the ent-7α,18-dihydroxy-15β,16β-epoxykaurane structure (MW = 320.47, C₂₀H₃₂O₃) was obtained from the acetone extract of Sideritis leptoclada plant as well as from some other Sideritis species. It crystallizes in the orthorhombic space group P2₁, 2₁, 2₁ with a = 10.967(3), b = 24.555(5), c = 6.372(4) Å, Dc = 1.240 g cm⁻³, Z = 4, and refines to R = 0.065 for 721 independent reflections. The skeleton consists of three fused six-membered rings and a five-membered ring with fused epoxide. The six membered rings exhibited slightly distorted chair conformation. In addition to sideroxol, two kaurane and five kaurene diterpenes were isolated from the hexane and acetone extracts of the studied plant.     

Photoluminescence characteristics of Mg- and Si-doped GaN thin films grown by MOCVD technique

We have studied the optical, structural and surface morphology of doped and undoped GaN thin films. The p- and n-type thin films have been successfully prepared by low-pressure MOCVD technique by doping with Mg and Si, respectively. The different carrier concentrations were obtained in the GaN thin films by varying dopant concentrations. Photoluminescence (PL) studies were carried to find the defect levels in the doped and undoped GaN thin films at low temperature. In the undoped GaN thin films, a low intensity and broad yellow band peak was observed. The donor–acceptor pair (DAP) emission and its phonon replicas were observed in both the Si or Mg lightly doped GaN thin films. The dominance of the blue and the yellow emissions increased in the PL spectra, as the carrier concentration was increased. The XRD and SEM analyses were employed to study the structural and surface morphology of the films, respectively. Both the doped and the undoped films exhibited hexagonal structure and polycrystalline nature. Mg-doped GaN thin films showed columnar structure whereas Si-doped films exhibited spherical shape grains.