GLOBAL ATTRACTOR FOR HASEGAWA-MIMA EQUATION

The long time behavior of solution of the Hasegawa-Mima equation with dissipation term was considered. The global attractor problem of the Hasegawa-Mima equation with initial periodic boundary condition was studied. Applying the uniform a priori estimates method, the existence of global attractor of this problem was proved, and also the dimensions of the global attractor was estimated.     

Dispersion of multi-walled carbon nanotubes in poly（p-phenylene） thin films and their electrical characteristics

Dispersion of multi-walled carbon nanotubes in poly（p-phenylene） composite exposed to toluene was experimentally investigated. 3 mg of multi-walled carbon nanotubes with nominal size of 20 nm was compounded with 30 mg of poly（p-phenylene） with the presence of terpineol as binding initiator. To investigate an optimal condition for homogenizing all constituents, ultrasonication with an output power of 750W was employed with compounding time of 3, 10, 20 and 30 min. With FTIR analyses, it could be confirmed that homogeneous composite of multi-walled carbon nanotubes and poly（p-phenylene） could be prepared. SEM analyses were also conducted to examine the dispersion of multi-walled carbon nanotubes in the polymer matrix. Then intrinsic electrical resistance of the composites after being exposed to toluene was also investigated. It was found that the composite film prepared with ultrasonication for 20 min could provide sufficiently sensitive response with respect to varied concentration of toluene.     

DRIFT MOTION OF FREE-ROTOR GYROSCOPE WITH RADIAL MASS-UNBALANCE

The motion of a rigid body about fixed point with small radial mass-unbalance in homogeneous gravitational field was discussed. The dynamical equations described by state variables of the body were established, and approximate analytical solutions for a spinning body with high speed were obtained by use of the average method. The influence of the radial mass-unbalance of the rotor to the precession character of a free-rotor gyroscope was analyzed. And a physical explanation of the drift phenomenon of the gyro was given. An applicable formula of gyro‘ s constant drift in analytical form was obtained, which is perfectly coincident with the numerical calculate‘on     

Generalized variational principles of the viscoelastic body with voids and their applications

From the Boltzmann‘ s constitutive law of viscoelastic materials and the linear theory of elastic materials with voids, a constitutive model of generalized force fields for viscoelastic solids with voids was given. By using the variational integral method, the convolution-type functional was given and the corresponding generalized variational principles and potential energy principle of viscoelastic solids with voids were presented. It can be shown that the variational principles correspond to the differential equations and theinitial and boundary conditions of viscoelastic body with voids. As an application, a generalized variational principle of viscoelastic Timoshenko beams with damage was obtained which corresponds to the differential equations of generalized motion and the initial and boundary conditions of beams. The variational principles provide a way for solving problems of viscoelastic solids with voids.     

Analytical solutions of steady vibration of free rectangular plate on semi-infinite elastic foundation

The method of double Fourier transform was employed in the analysis of the semi-infinite elastic foundation with vertical load.And an integral representations for the displacements of the semi-infinite elastic foundation was presented.The analytical solution of steady vibration of an elastic rectangle plate with four free edges on the semi-infinite elastic foundation was also given by combining the analytical solution of the elastic rectangle plate with the integral representation for displacements of the semi- infinite elastic foundation.Some computational results and the analysis on the influence of parameters were presented.     

FINITE ELEMENT METHOD ON NUMERICAL SIMULATION OF STRATUM CORNEUM''''S PENETRATION PROPERTY

How the outer substance could penetrate through the skin lies in the stratum corneum, because it is the main barrier in the multi-layers of the skin. Supposing the keratin cell with a special geometry as tetrakaidecahedron, the penetration property of stratum corneum was the key problem which was numerically simulated with finite element method. At first the discretization of the stratum corneum region was given in two steps: first, the discretization of the keratin cell; second, the discretization of fattiness that surrounds the keratin. Then there was the work of numerical simulation. In this procedure, the finite element method and the multi-grid method were used. The former was to obtain the discretization of basic elements; the latter was to decrease the high frequency error. At last the visualization of the numerical simulation was shown.     

FINITE ELEMENT METHOD ON NUMERICAL SIMULATION OF STRATUM CORNEUM＇S PENETRATION PROPERTY

How the outer substance could penetrate through the skin lies in the stratum corneum, because it is the main barrier in the multi-layers of the skin. Supposing the keratin cell with a special geometry as tetrakaidecahedron, the penetration property of stratum corneum was the key problem which was numerically simulated with finite element method. At first the discretization of the stratum corneum region was given in two steps： first, the discretization of the keratin cell; second, the discretization of fattiness that surrounds the keratin. Then there was the work of numerical simulation. In this procedure, the finite element method and the multi-grid method were used. The former was to obtain the discretization of basic elements; the latter was to decrease the high frequency error. At last the visualization of the numerical simulation was shown.     

Design optimization of the S-frame to improve crashworthiness

In this paper, the S-frames, the front side rail structures of automobile, were investigated for crashworthihess. Various cross-sections including regular polygon, nonconvex polygon and multi-cell with inner stiffener sections were investigated in terms of energy absorption of S-frames. It was determined through extensive numerical simulation that a multi-celI S-frame with double vertical internal stiffeners can absorb more energy than the other configurations. Shape optimization was also carried out to improve energy absorption of the S-frame with a rectangular section. The center composite design of experiment and the sequential response surface method （SRSM） were adopted to construct the approximate design sub-problem, which was then solved by the feasible direction method. An innovative double S- frame was obtained from the optimal result. The optimum configuration of the S-frame was crushed numerically and more plastic hinges as well as shear zones were observed during the crush process. The energy absorption efficiency of the structure with the optimal configuration was improved compared to the initial configuration.     

METHOD TO CALCULATE STRESS INTENSITY FACTOR OF V-NOTCH IN BI-MATERIALS

Based on Zak＇s stress function, the eigen-equation of stress singularity ofbi-materials with a V-notch was obtained. A new definition of stress intensity factor for a perpendicular interfacial V-notch of bi-material was put forward. The effects of shear modulus and Poisson＇s ratio of the matrix material and attaching material on eigen-values were analyzed. A generalized expression for calculating/（i of the perpendicular V-notch of bi-materials was obtained by means of stress extrapolation. Effects of notch depth, notch angle and Poisson＇s ratio of materials on the singular stress field near the tip of the V-notch were analyzed systematically with numerical simulations. As an example, a finite plate with double edge notches under uniaxial uniform tension was calculated by the method presented and the influence of the notch angle and Poisson＇s ratio on the stress singularity near the tip of notch was obtained.     

EXACT LINEARIZATION BASED MULTIPLE-SUBSPACE ITERATIVE RESOLUTION TO AFFINE NONLINEAR CONTROL SYSTEM

To the optimal control problem of affine nonlinear system, based on differential geometry theory, feedback precise linearization was used. Then starting from the simulative relationship between computational structural mechanics and optimal control, multiple-substructure method was inducted to solve the optimal control problem which was linearized. And finally the solution to the original nonlinear system was found. Compared with the classical linearizational method of Taylor expansion, this one diminishes the abuse of error expansion with the enlargement of used region.     

Evolution of a 2-D disturbance in a supersonic boundary layer and the generation of shocklets

Through direct numerical simulation, the evolution of a 2-D disturbance in a supersonic boundary layer has been investigated. At a chosen location, a small amplitude T-S wave was fed into the boundary layer to investigate its evolution. Characteristics of nonlinear evolution have been found. Two methods were applied for the detection of shocklets, and it was found that when the amplitude of the disturbance reached a certain value, shocklets would be generated, which should be taken into consideration when nonlinear theory of hydrodynamic stability for compressible flows is to be established.     

MAXIMAL ELEMENTS FOR G-B-MAJORIZED MAPPINGS IN PRODUCT G-CONVEX SPACES AND APPLICATIONS (Ⅱ)

By applying existence theorems of maximal elements for a family of G_B-majorized mappings in a product space of G-convex spaces, some coincidence theorem, Fan-Browder type fixed point theorem and some existence theorems of solutions for a system of minimax inequalities are proved under noncompact setting of G-convex spaces. These theorems improve and generalize many important known results in literature. Contributed by Duping Xie-ping Foundation items: the National Natural Science Foundation of China (19871059); the Natural Science Foundation of Education Department of Sichuan Province ([2000]25) Biography: Duping Xie-ping (1938∼), Professor (E-mail: dingxip@sichu.edu.cn)     

Visco-elastic systems under both deterministic and bound random parameteric excitation

The principal resonance of a visco-elastic systems under both deterministic and random parametric excitation was investigated. The method of multiple scales was used to determine the equations of modulation of amplitude and phase. The behavior, stability and bifurcation of steady state response were studied by means of qualitative analysis. The contributions from the visco-elastic force to both damping and stiffness can be taken into account. The effects of damping, detuning, bandwidth, and magnitudes of deterministic and random excitations were analyzed. The theoretical analysis is verified by numerical results. Foundation item: the National Natural Science Foundation of China (10072049) Biography: XU Wei (1957∼), Professor, Doctor (E-mail: weixu@nwpu.edu.cn)     

A NOTE ON BIFURCATIONS OF u″+μ(u-uk)=0(4≤k∈Z+)

Bifurcations of one kind of reaction-diffusion equations, u″+μ(u-u^k)=0(μ is a parameter,4≤k∈Z⁺), with boundary value condition u(0)=u(π)=0 are discussed. By means of singularity theory based on the method of Liapunov-Schmidt reduction, satisfactory results can be acquired.     

Thermo-piezoelectric effects on the postbuckling of axially-loaded hybrid laminated cylindrical panels

IntroductionCompositelaminatedcylindricalpanelhasbeenusedextensivelyasastructuralconfiguration,mainlyintheaerospaceindustry .Oneoftherecentadvancesinmaterialandstructuralengineeringisinthefieldofsmartstructureswhichincorporatesadaptivematerials.Bytakingadvantageofthedirectandconversepiezoelectriceffects,piezoelectriccompositestructurescancombinethetraditionalperformanceadvantagesofcompositelaminatesalongwiththeinherentcapabilityofpiezoelectricmaterialstoadapttotheircurrentenvironment.Therefore…     

THE MULTI-SYMPLECTIC ALGORITHM FOR “GOOD” BOUSSINESQ EQUATION

The multi-symplectic formulations of the “Good” Boussinesq equation were considered. For the multi-symplectic formulation, a new fifteen-point difference scheme which is equivalent to the multi-symplectic Preissman integrator was derived. The numerical experiments show that the multi-symplectic scheme have excellent long-time numerical behavior. Foundation items: the Foundation for Key Laboratory of Scientific/Engineering Computing Institute of Computational Mathematics and Scientific/Engineering Computing, Chinese Academy of Sciences; the Natural Science Foundation of Huaqiao University. Biography: ZENG Wen-ping (1940-), Professor (E-mail: qmz@1sec.cc.ac.cn)     

MIXED FINITE ELEMENT METHODS FOR THE SHALLOW WATER EQUATIONS INCLUDING CURRENT AND SILT SEDIMENTATION （Ⅰ）——THE CONTINUOUS-TIME CASE

An initial-boundary value problem for shallow equation system consisting of water dynamics equations, silt transport equation, the equation of bottom topography change, and of some boundary and initial conditions is studied, the existence of its generalized solution and semidiscrete mixed finite element (MFE) solution was discussed, and the error estimates of the semidiscrete MFE solution was derived. The error estimates are optimal.     

Global existence and blow-up phenomena of classical solutions for the system of compressible adiabatic flow through porous media

By means of maximum principle for nonlinear hyperbolic systems, the results given by HSIAO Ling and D. Serre was improved for Cauchy problem of compressible adiabatic flow through porous media, and a complete result on the global existence and the blowup phenomena of classical solutions of these systems. These results show that the dissipation is strong enough to preserve the smoothness of ‘ small ‘ solution.     

New method to option pricing for the general black-scholes model—An actuarial approach

Using physical probability measure of price process and the principle of fair premium, the results of Mogens Bladt and Hina Hviid Rydberg are generalized. In two cases of paying intermediate divisends and no intermediate dividends, the Black-Scholes model is generalized to the case where the risk-less asset (bond or bank account) earns a time-dependent interest rate and risk asset (stock) has time-dependent the continuously compounding expected rate of return, volatility. In these cases the accurate pricing formula and put-call parity of European option are obtained. The general approach of option pricing is given for the general Black-Scholes of the risk asset (stock) has the continuously compounding expected rate of return, volatility. The accurate pricing formula and put-call parity of European option on a stock whose price process is driven by general Ornstein-Uhlenback (O-U) process are given by actuarial approach. Foundation items: the National Natural Science Foundation of China (69972036); the Natural Science Foundation of Henan Education Committee (1999110010) Biography: YAN Hai-feng (1964∼), Associate Professor, Doctor (E-mail: yhaif@263.net)