共查询到20条相似文献,搜索用时 48 毫秒
1.
2.
3.
4.
5.
对欹器的工作过程进行静力学分析,通过逐步实现其工作要求的方法,对欹器的形状进行了一种简化设计,给出了其简单的形状及其相关数据. 相似文献
6.
7.
8.
铅耗能器主要利用金属铅塑性耗能,是一种构造简单、耗能性能优良而又经济的耗能减震元件。本文提出了一种隔板式铅耗能器。根据其构造和耗能原理,设计了四种不同约束形式的耗能元件,并通过EHF-EM电液伺服疲劳试验机进行了低周循环试验,分析了这四种约束形式对隔板式铅耗能器的力学性能与耗能性能的影响,揭示了其耗能机制。研究结果表明:隔板式铅耗能器主要具有屈服位移小、造价低廉、构造简单、工作性能稳定、耗能性能优良的特点,在建筑结构和大型机械减振控制方面具有广泛的应用前景;对比分析表明,其中B型耗能器力学性能尤为优越,耗能能力大且随位移增大刚度增强,同时对结构振动还具有限位功能。 相似文献
9.
设计了一个层叠式PVDF压电作动器用于壳结构的振动控制。考虑压电层、粘接层、壳体耦合关系,推导了表面局部粘贴层叠式PVDF压电作动器的圆柱壳的振动控制方程,给出了作动力与压电层和粘接层层数、厚度之间的关系以及作动力与作动器粘贴位置之间的关系。针对一端固定、另一端自由的圆柱壳,进行了振动控制仿真。结果表明层叠式PVDF压电作动器作动力与作动器层数近似成线性关系,增大作动器层数能有效增大作动力,在低控制电压下能显著抑制圆柱壳振动,作动器周向不完全粘贴时,在径向产生的径向作动力对壳体横向振动控制非常有利。说明了层叠式PVDF压电作动器是一种可用于壳体结构振动并具有良好作动效果的作动器。 相似文献
10.
求解一类可分离凸规划的对偶显式模型DP-EM方法 总被引:1,自引:0,他引:1
推导对偶目标函数的精确显式表达式,可选用更多成熟高效的求解方法,从而进一步提高了非线性规划对偶理论求解结构拓扑优化问题的效率.研究工作来源于非线性凸规划同其对偶规划的间隙为零,可以等价转化为对偶问题求解,通常可以大大地缩小问题的规模,可是二者不具有显式关系却影响了对偶解法的应用.所幸的是,结构优化当中一大类问题包括连续体结构拓扑优化问题,不仅具有凸性,而且具有变量可分离性,于是原变量和对偶变量之间有了显式关系,因此,对偶解法成了38年来被应用的有效方法之一.然而长期以来,对偶问题的目标函数并不是显式,这缘于含参数的极小化问题导致目标函数为隐式表达,常见的显式化方法是进行二阶近似.本文突破了对偶问题难以显式化只能采用近似显式的定势,将我们提出的"对偶规划-显式模型"(DP-EM)方法应用于连续体结构拓扑优化,并与对偶序列二次规划(DSQP)算法及移动渐近线(MMA)算法为求解器的方法进行计算效率对比,结果显示:(1)MMA算法比DP-EM算法和DSQP算法的外部迭代次数均多;(2)DP-EM算法与DSQP算法外循环次数相同,而内循环数显著减少.说明了DP-EM算法具有显式对偶函数的优势. 相似文献
11.
对《力学》中的物体自由度进行多方面分析,以深化教学、提高学生正
确分析物理问题的能力.使用实际教学分析的研究方法,在《力学》范围内讨论自由度与坐标、
自由与约束的关系并得以下结论:
(1) 同一物体的自由度随其所在的``空间'不同而不同, 不因坐标系的选取不同而
异, 在同类参考系中不因参考系的动静而有别;(2)自由度遵循叠加原理.
讨论了质点系的总自由度及相关计算问题,并指出研究《力学》中自由度的意义. 相似文献
12.
13.
14.
Tibor Javor 《Experimental Mechanics》1968,8(4):171-176
The present paper deals with development and design of new methods utilizing Wiedemann's effect for determination of state of strain in building structures. Wiedemann's effect and some features of torsional strain of magnetic field are the basis of new experimental method. Especially the point electromagnetic strain gages using the effect of pure torsion of electromagnetic field to enable universal examination. For strain-gage measurements, almost all physical quantities are used which can be related to the variation in length of the structures. From the electric strain measurements, the most commonly used methods are the measurements by resonance-wire strain gages or by electric-resistance strain gages. In this paper, electromagnetic strain gages are discussed using the Wiedemann effect, and the author describes some new measuring equipment and his own suggestions and methods based on an application of this effect. 相似文献
15.
16.
17.
18.
It is well known that the problem on nonseparating potential flow of an incompressible fluid about an array of profiles reduces to an integral equation for a certain real function, determined on the contours of the profiles of the array. As such a function one can take, as was done, for instance, in [1–5], the relative velocity of the fluid on the profiles of the array. For arrays of profiles of arbitrary shape it is necessary to solve the corresponding integral equation numerically. In the particular examples of the calculation of aerodynamic arrays that are available [1–3] the numerical methods used were based on the approximate evaluation of contour integrals by rectangle formulas. As investigations showed, sizeable errors arose thereby in the approximate solution obtained, these being especially significant in the case of curved profiles of relatively small bulk. In the present paper a method for the numerical solution of the integral equation obtained in [5] is proposed. The method is based on the replacement of a profile of the array with an inscribed N polygon, the length of whose sides is of the order N–1 and whose internal angles are close to . Convergence with increasing N of the numerical solution to an exact solution of the integral equations at the reference points is demonstrated. Examples of the calculation are given.Novosibirsk. Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 105–112, March–April, 1972. 相似文献
19.