Adaptive neural network control for coordinated motion of a dual-arm space robot system with uncertain parameters

Control of coordinated motion between the base attitude and the arm joints of a free-floating dual-arm space robot with uncertain parameters is discussed. By combining the relation of system linear momentum conversation with the Lagrangian approach, the dynamic equation of a robot is established. Based on the above results, the free-floating dual-arm space robot system is modeled with RBF neural networks, the GL matrix and its product operator. With all uncertain inertial system parameters, an adaptive RBF neural network control scheme is developed for coordinated motion between the base attitude and the arm joints. The proposed scheme does not need linear parameterization of the dynamic equation of the system and any accurate prior-knowledge of the actual inertial parameters. Also it does not need to train the neural network offline so that it would present real-time and online applications. A planar free-floating dual-arm space robot is simulated to show feasibility of the proposed scheme.     

Impact dynamics analysis of free-floating space manipulator capturingsatellite on orbit and robust adaptive compound controlalgorithm design for suppressing motion

The impact dynamics, impact effect, and post-impact unstable motion sup- pression of free-floating space manipulator capturing a satellite on orbit are analyzed. Firstly, the dynamics equation of free-floating space manipulator is derived using the sec- ond Lagrangian equation. Combining the momentum conservation principle, the impact dynamics and effect between the space manipulator end-effector and satellite of the cap- ture process are analyzed with the momentum impulse method. Focusing on the unstable motion of space manipulator due to the above impact effect, a robust adaptive compound control algorithm is designed to suppress the above unstable motion. There is no need to control the free-floating base position to save the jet fuel. Finally, the simulation is proposed to show the impact effect and verify the validity of the control algorithm.     

Dynamics and adaptive control of a dual-arm space robot with closed-loop constraints and uncertain inertial parameters简

A dynamics-based adaptive control approach is proposed for a planar dual-arm space robot in the presence of closed-loop constraints and uncertain inertial parameters of the payload. The controller is capable of controlling the po- sition and attitude of both the satellite base and the payload grasped by the manipulator end effectors. The equations of motion in reduced-order form for the constrained system are derived by incorporating the constraint equations in terms of accelerations into Kane＇s equations of the unconstrained system. Model analysis shows that the resulting equations perfectly meet the requirement of adaptive controller design. Consequently, by using an indirect approach, an adaptive control scheme is proposed to accomplish position/attitude trajectory tracking control with the uncertain parameters be- ing estimated on-line. The actuator redundancy due to the closed-loop constraints is utilized to minimize a weighted norm of the joint torques. Global asymptotic stability is proven by using Lyapunov＇s method, and simulation results are also presented to demonstrate the effectiveness of the proposed approach.     

Robust attitude control for rapid multi-target tracking in spacecraft formation flying

A robust attitude tracking control scheme for spacecraft formation flying is presented. The leader spacecraft with a rapid mobile antenna and a camera is modeled. While the camera is tracking the ground target, the antenna is tracking the follower spacecraft. By an angular velocity constraint and an angular constraint, two methods are proposed to compute the reference attitude profiles of the camera and antenna, respectively. To simplify the control design problem, this paper first derives the desired inverse system （DIS）, which can convert the attitude tracking problem of 3D space into the regulator problem. Based on DIS and sliding mode control （SMC）, a robust attitude tracking controller is developed in the presence of mass parameter uncertainties and external disturbance. By Lyapunov stability theory, the closed loop system stability can be achieved. The numerical simulations show that the proposed robust control scheme exhibits significant advantages for the multi-target attitude tracking of a two-spacecraft formation.     

OPTIMAL MOTION PLANNING FOR A RIGID SPACECRAFT WITH TWO MOMENTUM WHEELS USING QUASI-NEWTON METHOD

An optimal motion planning scheme based on the quasi-Newton method is proposedfor a rigid spacecraft with two momentum wheels. A cost functional is introduced to incorporatethe control energy, the final state errors and the constraints on states. The motion planning fordetermining control inputs to minimize the cost functional is formulated as a nonlinear optimalcontrol problem. Using the control parametrization, one can transform the infinite dimensionaloptimal control problem to a finite dimensional one that is solved via the quasi-Newton methodsfor a feasible trajectory which satisfies the nonholonomic constraint. The optimal motion planningscheme was applied to a rigid spacecraft with two momentum wheels. The simulation results showthe effectiveness of the proposed optimal motion planning scheme.     

Open-plus-closed-loop control for chaotic motion of 3D rigid pendulum

An open-plus-closed-loop （OPCL） control problem for the chaotic motion of a 3D rigid pendulum subjected to a constant gravitationM force is studied. The 3D rigid pendulum is assumed to be consist of a rigid body supported by a fixed and frictionless pivot with three rotational degrees. In order to avoid the singular phenomenon of Euler＇s angular velocity equation, the quaternion kinematic equation is used to describe the motion of the 3D rigid pendulum. An OPCL controller for chaotic motion of a 3D rigid pendulum at equilibrium position is designed. This OPCL controller contains two parts： the open-loop part to construct an ideal trajectory and the closed-loop part to stabilize the 3D rigid pendulum. Simulation results show that the controller is effective and efficient.     

Time-delayed feedback control optimization for quasi linear systems under random excitations

A strategy for time-delayed feedback control optimization of quasi linear systems with random excitation is proposed. First, the stochastic averaging method is used to reduce the dimension of the state space and to derive the stationary response of the system. Secondly, the control law is assumed to be velocity feedback control with time delay and the unknown control gains are determined by the performance indices. The response of the controlled system is predicted through solving the Fokker-Plank-Kolmogorov equation associated with the averaged Ito equation. Finally, numerical examples are used to illustrate the proposed control method, and the numerical results are confirmed by Monte Carlo simulation .     

Numerical solutions of linear quadratic control for time-varying systems via symplectic conservative perturbation

Optimal control system of state space is a conservative system, whose approximate method should be symplectic conservation. Based on the precise integration method, an algorithm of symplectic conservative perturbation is presented. It gives a uniform way to solve the linear quadratic control (LQ control) problems for linear time-varying systems accurately and efficiently, whose key points are solutions of differential Riccati equation (DRE) with variable coefficients and the state feedback equation. The method is symplectic conservative and has a good numerical stability and high precision. Numerical examples demonstrate the effectiveness of the proposed method.     

Coordinating control of multiple rigid bodies based on motion primitives

This paper studies the problem of coordinated motion generation for a group of rigid bodies.Two classes of coordinated motion primitives,relative equilibria and maneuvers,are given as building blocks for generating coordinated motions.In a motion-primitive based planning framework,a control method is proposed for the robust execution of a coordinated motion plan in the presence of perturbations.The control method combines the relative equilibria stabilization with maneuver design,and results in a closeloop motion planning framework.The performance of the control method has been illustrated through a numerical simulation.     

Optimal control of nonholonomic motion planning for a free-falling cat

The nonholonomic motion planning of a free-falling cat is investigated. Non-holonomicity arises in a free-falling cat subject to nonintegrable angle velocity constraints or nonintegrable conservation laws. When the total angular momentum is zero, the motion equation of a free-falling cat is established based on the model of two symmetric rigid bodies and conservation of angular momentum. The control of system can be converted to the problem of nonholonomic motion planning for a free-falling cat. Based on Ritz approximation theory, the Gauss-Newton method for motion planning by a falling cat is proposed. The effectiveness of the numerical algorithm is demonstrated through simulation on model of a free-falling cat.     

存在关节力矩输出死区及外部干扰的漂浮基空间机械臂积分滑模神经网络自适应控制

探讨了载体位置和姿态都不受控时,漂浮基空间机械臂在带有关节力矩输出死区及外部干扰情况下轨迹跟踪的控制算法设计问题。死区与外部干扰影响系统的跟踪精度与稳定性。为此引入积分型切换函数,减少外部干扰引起的稳态误差,并利用径向基函数神经网络逼近动力学方程的未知部分,设计了一种积分滑模神经网络控制方案。控制算法的优点是,在死区斜率与边界参数不确定及最优逼近误差上确界未知的条件下,可以利用最优逼近误差、死区及干扰的补偿项来消除影响。李亚普诺夫稳定性分析证明了闭环系统的稳定性,且轨迹跟踪误差将收敛到0的某个小邻域内。仿真算例证实了该控制算法的有效性,实现了空间机械臂的轨迹跟踪控制。     

漂浮基双臂空间机器人姿态与末端抓手惯性空间轨迹协调运动的模糊滑模控制

本文讨论了载体姿态受控、位置不受控制的双臂空间机器人系统的控制问题.利用拉格朗日方法并结合系统动量守恒关系,建立了双臂空间机器人系统的非线性系统动力学模型.以此为基础,考虑到空间机器人系统结构的复杂性及其某些参数的变动性,根据具有较强鲁棒性的变结构控制理论,设计了双臂空间机器人载体姿态与两机械臂末端抓手惯性空间轨迹协调运动的滑模变结构控制方案.为了克服滑模变结构控制器抖振的缺点,附加设计了一个模糊控制器,以便根据系统的输出来动态调节滑模变结构控制器等速趋近率的系数,从而既确保了系统的快速响应而又消除了原有的抖振.系统数值仿真,证明了上述控制方案良好的控制效果.     

存在关节死区的空间机器人无扰快速终端滑模控制

针对机械臂一般操作过程中运动学的非完整特性进行运动规划时没有考虑机械臂与待抓取目标之间的关系与关节的实际特性, 研究了存在关节死区的漂浮基平面三连杆空间机械臂拦截目标前最后阶段的载体无扰动空间规划与控制. 首先根据拉格朗日第二类方程, 建立存在关节死区的载体位姿均不受控的漂浮基平面三连杆空间机械臂的动力学模型, 推导出三连杆空间机械臂反作用零空间的数学模型, 并对反作用零空间进行向量范数约束算法研究; 进而提出了一种具有抗干扰性与高收敛性的非奇异快速终端滑模控制算法实现系统的姿态无扰控制, 该方法采用变系数双幂次趋近率与非奇异快速终端滑模面相结合的方式, 提高系统状态收敛速度与抗干扰性. 为了消除机械臂关节存在的死区特性, 设计了自适应死区补偿器, 通过自适应控制来逼近死区特性的上界, 以消除关节死区对系统带来的影响, 确保跟踪控制的有效执行. 最后基于Lyapunov函数法证明了系统的稳定性, 并通过系统数值仿真结果验证了存在死区情况下机械臂的各关节角跟踪上无反应空间下的期望轨迹的同时载体的姿态处于稳定状态, 验证了所提方法的有效性.      

漂浮基柔性关节空间机器人自适应滑模运动控制及振动主动抑制

讨论了关节柔性且系统参数不确定的漂浮基空间机器人系统的动力学建模过程、运动轨迹跟踪控制算法设计及系统柔性振动的主动抑制问题。利用系统动量、动量矩守恒关系和拉格朗日法对系统动力学进行分析,并建立系统动力学方程。基于奇异摄动法将系统分解为表示系统刚性运动部分的慢变子系统和表示系统柔性运动部分的快变子系统。针对慢变子系统提出了一种自适应滑模控制算法。该控制算法是由基于滑模面的等效控制项、自适应控制项和PID反馈控制项组成。因此,它集合了滑模控制、自适应算法和PID技术的优点,且弥补了三种算法各自的缺点。该控制算法能够有效地补偿系统的转动误差和不确定参数,提高控制系统的精度。针对快变子系统,提出基于速度差值的反馈控制算法来抑制柔性关节引起的系统柔性振动,保证系统的稳定性。最后,通过仿真实验证明了提出的混合控制算法的有效性。     

漂浮基柔性两杆空间机械臂的关节运动鲁棒控制与柔性振动最优控制Robust joint motion control and vibration optimal control for a free-floating two-flexible-link space manipulator

讨论了载体位置、姿态均不受控情况下,具有有界干扰及有界未知参数的漂浮基柔性两杆空间机械臂的具有鲁棒性的关节运动控制与柔性振动最优控制算法设计问题。首先选择合理的联体坐标系,利用拉格朗日方程并结合动量守恒原理得到漂浮基柔性两杆空间机械臂系统的动力学方程。通过合理选择联体坐标系与利用奇异摄动理论,实现了两个柔性杆柔性振动之间、关节运动与两柔性杆柔性振动的解耦,得到了柔性两杆空间机械臂的慢变子系统与柔性臂快变子系统。针对两个子系统设计相应的控制规律,即增广鲁棒慢变子系统控制律与柔性臂快变子系统最优控制律,这两个相应的子系统控制规律综合到一起构成飘浮基柔性两杆空间机械臂总的关节运动与臂柔性振动控制的组合控制律。系统的数值仿真证实了方法的有效性。该控制方案不需要直接测量漂浮基的位置、移动速度和移动加速度。     

浮动基座空间机械臂系统的动力学建模与惯性轨迹跟踪的滑模控制

本文利用多刚体系统动力学方法对载体位置、姿态均不受控制的浮动基空间机械臂系统的运动学、动力学作了分析,并结合系统的动量与动量矩守恒关系建立了系统的动力学方程及运动的广义Jacobi关系。以此为基础,对空间机械臂末端抓手追踪惯性空间期望轨迹的控制问题作了研究。考虑到空间机械臂系统的结构复杂性及某些参数（如液体控制燃料的数量）的变动性,根据具有较强鲁棒性的变结构滑模控制理论,设计了轨迹跟踪控制的变结构滑模控制方案。此控制方案的优点在于：在操作过程中不需要对空间机械臂载体的位置、姿态进行主动控制,因此将大大减少位置、姿态控制装置的燃料消耗。通过对平面三杆自由浮动空间机械臂系统的仿真计算,证实了文中提出的变结构滑模控制方案的有效性。     

漂浮基空间机械臂关节空间轨迹的鲁棒自适应跟踪控制

本文讨论了具有不确定系统参数的漂浮基空间机械臂系统的控制问题,由于截体的位置与姿态均不变控制,空间机械臂系统的控制方程失去了关于系统惯性参数的线性性质,给控制系统设计带来极大的困难,基于增广变量的思想,我们克服了上述难点,保持了控制方程关于系统惯性参数的线性关系;在此基础上,针对系统中机械臂参数不确定,载荷参数未知的情况,提出了关节空间轨迹追踪的鲁棒自适应控制方案,并应用Lyapunov直接方法对上述控制方案的渐近稳定性条件作了证明,提出的控制方案适用于空间站舱内机械手控制系统设计,仿真运算证实了该方法的有效性。     

空间机械臂捕获卫星过程的碰撞动力学模拟及镇定运动的鲁棒控制

讨论了漂浮基空间机械臂捕获未知运动目标卫星的接触碰撞动力学建模和接触碰撞后系统镇定运动的控制问题。利用第二类拉格朗日方法和牛顿-欧拉法分别建立了接触碰撞前漂浮基空间机械臂和目标卫星两分体系统的动力学模型;以此为基础借助于空间机械臂与目标卫星接触点间的运动几何关系、力传递关系,计算了接触碰撞所产生的影响效应;捕获卫星后,联立空间机械臂与卫星接触碰撞前的动力学模型,建立了接触碰撞后两系统组合体动力学模型;并设计了增广鲁棒控制算法,以对受碰撞冲击后处于不稳定的组合体系统进行镇定运动控制。上述控制方法能应用于空间机械臂载体位置不受控情况,并能使组合体系统控制方程关于卫星不确定参数呈线性化关系。最后,利用数值仿真模拟捕获过程系统运动状态,验证了上述鲁棒控制镇定运动的效果。