PVC-CFRP管钢筋混凝土柱抗震性能非线性有限元分析

在试验研究基础上,借助有限元分析软件,选取合理材料本构关系,建立PVC-CFRP管钢筋混凝土柱有限元分析模型,验证分析模型的正确性。对试验进行延拓分析,探讨混凝土强度等级、纵筋配筋率、CFRP条带层数及剪跨比等对试件骨架曲线、刚度退化影响规律,分析低周往复荷载作用下PVC-CFRP管钢筋混凝土柱的受力性能,揭示低周往复荷载作用下PVC-CFRP管钢筋混凝土柱的受力工作机理。     

Debonding of FRP-plated reinforced concrete beam,a bond-slip analysis. I. Theoretical formulation

External bonding of FRP plates or sheets has emerged as a popular method for strengthening reinforced concrete. Debonding along the FRP–concrete interface can lead to premature failure of the structure. In this study, a bond-slip model is established to study the interface debonding induced by a flexural crack in a FRP-plated concrete beam. The reinforced concrete beam and FRP plate are modeled as two linearly elastic Euler–Bernoulli beams bonded together through a thin layer of FRP–concrete interface. The interface layer is essentially modeled as a large fracture processing zone of which the stress–deformation relationship is described by a nonlinear bond-slip model. Three different bond-slip models (bi-linear, triangular and linear-damaging) are used. By dividing the debonding process into several stages, governing equations of interfacial shear and normal stresses are obtained. Closed-form solutions are then obtained for the interfacial shear and normal stresses and the deflection of the beam in each stage of debonding. In such a way, the proposed model unifies the whole debonding process, including elastic deformation, debonding initiation and growth, into one model. With such a superior feature, the proposed model provides an efficient and effective analytical tool to study FRP–concrete interface debonding.     

纤维增强混凝土材料的界面剪应力分布研究

针对纤维与混凝土界面的破坏过程,提出了几种简化的粘结-滑移本构模型,以双线性局部粘结-滑移本构模型为基础,在受力平衡和变形协调的基本原理基础上,推导了纤维脱粘过程中界面剪应力的解析解.采用弹簧粘结单元,通过数值方法模拟了纤维与混凝土之间的粘结-滑移过程,给出了纤维与混凝土界面脱粘过程中界面剪应力的分布、变化情况.对解析解、有限元计算结果和试验结果之间的差异进行了对比分析,验证了简化模型的合理性和有效性.     

FRP-to-concrete interfaces between two adjacent cracks: Theoretical model for debonding failure

External bonding of fibre reinforced polymer (FRP) composites has become a popular technique for strengthening concrete structures all over the world. The performance of the interface between FRP and concrete is one of the key factors affecting the behaviour of the strengthened structure. Existing laboratory research has shown that the majority of reinforced concrete (RC) beams strengthened with a bonded FRP soffit plate fail due to debonding of the plate from the concrete. Two types of debonding failures have been commonly observed: plate end debonding and intermediate crack induced debonding. In order to understand and develop methods to predict such debonding failures, the bond behaviour between concrete and FRP has been widely studied using simple shear tests on FRP plate/sheet-to-concrete bonded joints and a great deal of research is now available on the behaviour of these bonded joints. However, for intermediate crack induced debonding failures, the debonding behaviour can be significantly different from that observed in a simple shear test. Among other factors, the most significant difference may be that the FRP plate between two adjacent cracks is subject to tension at both cracks. This paper presents an analytical solution for the debonding process in an FRP-to-concrete bonded joint model where the FRP plate is subject to tension at both ends. A realistic bi-linear local bond-slip law is employed. Expressions for the interfacial shear stress distribution and the load–displacement response are derived for different loading stages. The debonding process is discussed in detail. Finally, results from the analytical solution are presented to illustrate how the bond length affects the behaviour of such bonded joints. While the emphasis of the paper is on FRP-to-concrete joints, the analytical solution is equally applicable to similar joints between thin plates of other materials (e.g. steel and aluminium) and concrete.     

Cohesive zone model of intermediate crack-induced debonding of FRP-plated concrete beam

External bonding of FRP plates or sheets has emerged as a popular method for strengthening reinforced concrete structures. Debonding along the FPR–concrete interface can lead to premature failure of the structures. In this study, debonding induced by a flexural crack in a FRP-plated concrete beam is analyzed through a nonlinear fracture mechanics method. The concrete beam and FRP plate are modeled as linearly elastic simple beams connected together through a thin layer of FRP–concrete interface. A bi-linear cohesive (bond-slip) law, which has been verified by experiments, is used to model the FRP–concrete interface as a cohesive zone. Thus a cohesive zone model for intermediate crack-induced debonding is established with a unique feature of unifying the debonding initiation and growth into one model. Closed-form solutions of interfacial stress, FRP stress and ultimate load of the plated beam are obtained and then verified with the numerical solutions based on finite element analysis. Parametric studies are carried out to demonstrate the significant effect of FRP thickness on the interface debonding. The bond-slip shape is examined specifically. In spite of its profound effect on softening zone size, the bond-slip shape has been found to have little effect on the ultimate load of the plated beam. By making use of such a unique feature, a simplified explicit expression is obtained to determine the ultimate load of the plated concrete beam with a flexural crack conveniently. The cohesive zone model in this study also provides an efficient and effective way to analyze more general FRP–concrete interface debonding.     

THEORETICAL MODEL ON INTERFACE FAILURE MECHANISM OF REINFORCED CONCRETE CONTINUOUS BEAM STRENGTHENED BY FRP

Fiber reinforced polymer （FRP） composites are increasingly being used for the re-pair and strengthening of deteriorated concrete structural components through adhesive bonding of prefabricated strips/plates and the wet lay-up of fabric. Interfacial bond failure modes have attracted the attention of researchers because of the importance. The objective of the present study is to analyse the interface failure mechanism of reinforced concrete continuous beam strength-ened by FRP. An analytical solution has been firstly presented to predict the entire debonding process of the model. The realistic bi-linear bond-slip interfacial law was adopted to study this problem. The crack propagation process of the loaded model was divided into four stages （elastic,elastic-softening,elastic-softening-debonded and softening-debonded stage）. Among them,elastic-softening-debonded stage has four sub-stages. The equations are solved by adding suitable stress and displacement boundary conditions. Finally,critical value of bond length is determined to make the failure mechanism in the paper effective by solving the simultaneously linear algebraic equations. The interaction between the upper and lower FRP plates can be neglected if axial stiffness ratio of the concrete-to-plate prism is large enough.     

Cohesive fracture simulation and failure modes of FRP–concrete bonded interfaces

A work-of-fracture method using three-point bend beam (3PBB) specimen, commonly employed to determine the fracture energy of concrete, is adapted to evaluate the mode-I cohesive fracture of fiber reinforced plastic (FRP) composite–concrete adhesively bonded interfaces. In this study, a bilinear damage cohesive zone model (CZM) is used to simulate cohesive fracture of FRP–concrete bonded interfaces. The interface cohesive process damage model is proposed to simulate the adhesive–concrete interface debonding; while a tensile plastic damage model is used to account for the cohesive cracking of concrete near the bond line. The influences of the important interface parameters, such as the interface cohesive strength, concrete tensile strength, critical interface energy, and concrete fracture energy, on the interface failure modes and load-carrying capacity are discussed in detail through a numerical finite element parametric study. The results of numerical simulations indicate that there is a transition of the failure modes controlling the interface fracture process. Three failure modes in the mode-I fracture of FRP–concrete interface bond are identified: (1) complete adhesive–concrete interface debonding (a weak bond), (2) complete concrete cohesive cracking near the bond line (a strong bond), and (3) a combined failure of interface debonding and concrete cohesive cracking. With the change of interface parameters, the transition of failure modes from interface debonding to concrete cohesive cracking is captured, and such a transition cannot be revealed by using a conventional fracture mechanics-based approach, in which only an energy criterion for fracture is employed. The proposed cohesive damage models for the interface and concrete combined with the numerical finite element simulation can be used to analyze the interface fracture process, predict the load-carrying capacity and ductility, and optimize the interface design, and they can further shed new light on the interface failure modes and transition mechanism which emulate the practical application.     

循环加载条件下混凝土Ⅰ型裂缝扩展模拟的接触算法

沿裂缝可能开展路径设置接触点对,把求解接触问题的有限元混合法进行扩展,以实现循环加载条件下混凝土Ⅰ型裂缝扩展的数值模拟.根据荷载过程状态和缝面接触状态的不同,将循环荷载作用下的混凝土本构关系抽象为力学模型中的六种不同接触状态,不同的接触状态对应着不同的位移-应力曲线关系.以缝面张开位移和接触应力作为接触状态转变的判断参量,并给出了各状态的转变关系和数值判断条件,以接触算法实现了循环加载条件下混凝土Ⅰ型断裂扩展的数值模拟.首先给出了有限元混合法求解接触问题的基本思路,然后引入循环荷载下的混凝土本构关系,再对Ⅰ型裂缝扩展的数值实现方法进行了阐述,最后通过数值算例说明了数值实现方法的正确性和有效性.     

Dual finite element methods in homogenization for elastic–plastic fibrous composite material

The problem of homogenization for a periodic, elastic–perfectly plastic, fiber reinforced, composite material is considered. The overall mechanical behavior of the material is described using the anisotropic model of elastic–plastic body with kinematic hardening. The appropriate initial–boundary value problem, set for one repeatable cell of the composite, is solved in order to find the effective constitutive relations. The cell problem is solved using the finite element method formulated in two dual forms: in displacements and in stresses. Stress functions are used in the latter formulation.     

碳纤维布与钢板复合加固梁剥离破坏研究

通过12根碳纤维布与钢板复合加固钢筋混凝土梁的抗弯性能研究,结果表明复合加固方式能有效地改善被加固构件的受力性能,但常由于复合加固层的剥离可能导致加固效果的降低。复合加固层与被加固构件之间的剥离是由于薄弱截面在剪应力及正应力的集中作用下而产生的,文中对复合加固层与混凝土之间的粘结剪应力及剥离正应力的计算公式分别进行推导,并进一步对碳纤维布与钢板复合加固的剥离机理进行分析,为工程应用提供依据。     

FRP加固梁的FRP-混凝土界面脱胶分析

为了研究纤维增强聚合物(fiber reinforced polymer, FRP) 加固梁的FRP-混凝土界面脱胶破坏过程,本文将混凝土梁和FRP 板均视为线弹性的欧拉-伯努利梁(Euler-Bernoulli beams), 且两者通过粘结层胶结在一起. 对于FRP-混凝土结构,有两种形式的脱胶破坏：板端脱胶破坏和跨中裂缝导致的脱胶破坏.对于FRP-混凝土梁,利用合理的粘结模型按第2 种脱胶失效形式,详细讨论了FRP-混凝土界面的脱胶过程,得到了不同阶段的胶结滑移、界面剪应力和FRP 轴向力的解析解. 实验研究验证了理论分析的结果,参数研究进一步探讨了胶结长度和粘结层厚度对于FRP-混凝土界面脱胶行为的影响.     

一个新的钢筋混凝土损伤塑性模型

为了准确、高效地对拆除爆破工程进行数值模拟,考虑钢筋混凝土受拉刚化效应以及配筋率对受拉刚化效应的影响和受压箍筋约束效应,采用组合模量的方法给出了一个简化的钢筋混凝土本构关系,在LS-DYNA有限元软件中的混凝土损伤塑性模型的基础上,通过参数修改建立新的钢筋混凝土损伤塑性模型模拟来钢筋混凝土。在实验验证的基础上,采用钢筋混凝土损伤塑性等效模型对一双切口钢筋混凝土烟囱延时爆破拆除效果进行数值模拟,数值模拟结果表明该模型可以准确反映烟囱倒塌破坏及运动过程。     

A numerical model for reinforced concrete structures

This paper describes a two-dimensional approach to model fracture of reinforced concrete structures under (increasing) static loading conditions. The first part is dedicated to the concrete material. The concrete is described in compression by a non-local isotropic damage constitutive law. In tension, a fictitious crack/crack band model is proposed. The influence of biaxial stress states is incorporated in the constitutive relations. In the second part a bond model is described. It accounts for different failure mechanisms, a pullout failure and a splitting failure. This approach is applied to prestressed concrete beams with different failure mechanisms. The numerical results are compared to experimental data and show good agreement.     

A three-parameter elastic foundation model for interface stresses in curved beams externally strengthened by a thin FRP plate

Externally bonding of fiber reinforced polymer (FRP) plates or sheets has become a popular method for strengthening reinforced concrete structures. Stresses along the FRP–concrete interface are of great importance to the effectiveness of this type of strengthening because high stress concentration along the FRP–concrete interface can lead to the FRP debonding from the concrete beam. In this study, we develop an analytical solution of interface stresses in a curved structural beam bonded with a thin plate. A novel three-parameter elastic foundation model is used to describe the behavior of the adhesive layer. This adhesive layer model is an extension of the two-parameter elastic foundation commonly used in existing studies. It assumes that the shear stress in the adhesive layer is constant through the thickness, and the interface normal stresses along two concrete/adhesive and adhesive/FRP interfaces are different. Closed-form solutions are obtained for these two interfacial normal stresses, shear stress within the adhesive layer, and beam forces. The validation of these solutions is confirmed by finite element analysis.     

钢筋混凝土平面框架节点单元BCJ⁃5N

本文基于四根刚臂梁结合12个外接一维单元建立了钢筋混凝土框架节点单元，单元具有5个节点15个 自由度，称之为“BCJ-5N”单元．每个节点具有3个自由度，与普通梁单元一致，从而确保本单元适合于同普 通一维梁柱单元一起进行钢筋混凝土结构平面非线性分析．单元考虑了梁受力钢筋在框架节点内的黏结滑移作 用，并通过钢筋混凝土梁正截面强度设计建立了梁端弯矩与截面转角关系的骨架曲线，结合Lowes加载卸载模 型，组成了完整的静力、动力分析的框架节点单元，并将其移植到 ABAQUS通用分析平台上，通过对两跨三 层钢筋混凝土框架结构的滞回分析和三跨三层钢筋混凝土框架结构的动力分析两个算例，验证了本模型适合于 进行循环荷载和动力荷载作用下平面框架结构非线性响应分析．     

Process of debonding in RC beams shear-strengthened with FRP U-strips or side strips

Reinforced concrete (RC) beams may be strengthened for shear using externally bonded fiber reinforced polymer (FRP) composites in the form of side bonding, U-jacketing or complete wrapping. The shear failure of almost all RC beams shear-strengthened with side bonded FRP and the majority of those strengthened with FRP U-jackets, is due to debonding of the FRP. The bond behavior between the externally-bonded FRP reinforcement (referred to as FRP strips for simplicity) and the concrete substrate therefore plays a crucial role in the failure process of these beams. Despite extensive research in the past decade, there is still a lack of understanding of how debonding of FRP strips in such a beam propagates and how the debonding process affects its shear behavior. This paper presents an analytical study on the progressive debonding of FRP strips in such strengthened beams. The complete debonding process is modeled and the contribution of the FRP strips to the shear capacity of the beam is quantified. The validity of the analytical solution is verified by comparing its predictions with numerical results from a finite element analysis. This analytical treatment represents a significant step forward in understanding how interaction between FRP strips, steel stirrups and concrete affects the shear resistance of RC beams shear-strengthened with FRP strips.     

钢筋混凝土结构的三维有限元非线性分析

提出了一个简单的混凝土三维本构模型,结合两种钢筋分布模式编制了钢筋混凝土结构非线性分析的三维有限元程序,通过两个经典的算例对比分析,表明本文提出的混凝土本构模型能够有效地模拟结构的破坏荷载和破坏过程。     

Analysis on interface damage of fiber reinforced composites under cyclic load

Based on the shear-lag model, the interface damage of fiber reinforced composites near a matrix crack under cyclic load is analyzed. The governing equations for load and unload processes are derived and solved. The effective debond stress and the debond velocity are then obtained. Furthermore, the degradation of friction stress on the interface caused by slipping is taken into account. Results are given for the degradation behavior and the steady state of debonding.