基于离散模型的混凝土构件破坏过程研究

刚体-弹簧元模型是一种离散化分析模型,可以反映连续体从开裂到破坏不连续过程的真实裂缝形态。本文在总结既有相关研究的基础上,引入并程序化刚体-弹簧元模型用于混凝土构件开裂破坏行为研究,特别是有关混凝土构件开裂后直至破坏的裂缝真实形态研究。首先确定了三维刚体-弹簧元模型中刚体单元的划分、弹簧元的特性（混凝土材料本构关系施加于弹簧元）、刚体单元与弹簧元装配方式、钢筋本构关系及其与混凝土相互作用,然后实现了刚体-弹簧元模型用于混凝土构件开裂破坏行为研究的程序化,并以剪切破坏的钢筋混凝土构件进行实例验证。结果表明,基于刚体-弹簧元模型的程序可以较为准确地反映该钢筋混凝土构件从开裂到破坏真实裂缝形态。     

Three dimensional combined fracture–plastic material model for concrete

This paper describes a combined fracture–plastic model for concrete. Tension is handled by a fracture model, based on the classical orthotropic smeared crack formulation and the crack band approach. It employs the Rankine failure criterion, exponential softening, and it can be used as a rotated or a fixed crack model. The plasticity model for concrete in compression is based on the Menétrey–Willam failure surface, the plastic volumetric strain as a hardening/softening parameter and a non-associated flow rule based on a nonlinear plastic potential function. Both models use a return-mapping algorithm for the integration of constitutive equations. Special attention is given to the development of an algorithm for the combination of the two models. The suggested combination algorithm is based on a recursive substitution, and it allows for the two models to be developed and formulated separately. The algorithm can handle cases when failure surfaces of both models are active, but also when physical changes such as crack closure occur. The model can be used to simulate concrete cracking, crushing under high confinement and crack closure due to crushing in other material directions. The model is integrated in a general finite element package ATENA and its performance is evaluated by comparisons with various experimental results from the literature.     

Formulation and numerical implementation of a constitutive law for concrete with strain-based damage and plasticity

A triaxial constitutive law for concrete within the framework of isotropic damage combined with plasticity is proposed in this paper. It covers typical characteristics of concrete like non-linear uniaxial compression and tension, bi- and triaxial failure criteria and dilatancy with a unified strain-based approach. Thus, this model is quite simple and especially suitable for strain-driven methods like common finite elements. It is complemented with a regularization method based on the crack band approach. A further issue is discussed with procedures for the model parameter determination for a wide range of concrete grades. The application of the model is demonstrated with typical benchmark tests for plain concrete.     

混凝土复合型裂纹扩展的非局部近场动力学建模分析

基于非局部近场动力学理论,构建了修正的能反映混凝土宏观拉压异性和断裂特征的近场动力学本构模型,开发了相应的离散、加载和时间积分算法,实现典型混凝土构件中复合型裂纹扩展过程模拟。在物质点对尺度上定义局部损伤并考虑物质点对的相对转动,通过求解时空微-积分方程实现裂纹的自然萌生与扩展,避免裂尖不连续带来的求解奇异性、网格依赖性和网格重构以及常规近场动力学本构模型的泊松比限制。通过含单边和双边初始裂纹四点剪切混凝土梁裂纹扩展破坏全过程模拟,得到破坏形态、破坏荷载以及完整的荷载-裂纹开口滑移曲线,并与试验和其他数值模拟结果对比,验证了模型的精确性和算法的稳定性。     

伴随微孔洞生长的裂纹弹塑性定常扩展

裂纹在韧性材料中扩展时,将们随着微孔洞的萌生和生长,孔洞的萌生和深化将直接影响着材料的总体断裂韧性和强度,以往的研究主要集中在将裂纹的扩展刻划为微孔洞的萌生、生长和汇合这样一个过程。从传统的断裂过程区模型出发研究微孔洞的萌生和生长对材料总体断裂韧性的影响,通过采用Ｇｕｒｓｏｎ模型,建立塑性增量本构关系,然后针对定常扩展情况直接进行分析,孔洞对材料断裂韧性的影响由本构关系刻划,而在孔洞汇合模型中,上     

Dynamic fracture of concrete compact tension specimen: Experimental and numerical study

Compared to quasi-static loading concrete loaded by higher loading rates acts in a different way. There is an influence of strain-rate and inertia on resistance, failure mode and crack pattern. With increase of loading rate failure mode changes from mode-I to mixed mode. Moreover, theoretical and numerical investigations indicate that after the crack reaches critical velocity there is progressive increase of resistance and crack branching. These phenomena have recently been demonstrated and discussed by O?bolt et al. (2011) on numerical study of compact tension specimen (CTS) loaded by different loading rates. The aim of the present paper is to experimentally verify the results obtained numerically. Therefore, the tests and additional numerical studies on CTS are carried out. The experiments fully confirm the results of numerical prediction discussed in O?bolt et al. (2011). The same as in the numerical study it is shown that for strain rates lower than approximately 50/s the structural response is controlled by the rate dependent constitutive law, however, for higher strain rates crack branching and progressive increase of resistance is observed. This is attributed to structural inertia and not the rate dependent strength of concrete. Maximum crack velocity of approximately 800 m/s is measured before initiation of crack branching. The comparison between numerical and experimental results shows that relatively simple modeling approach based on continuum mechanics, rate dependent microplane model and standard finite elements is capable to realistically predict complex phenomena related to dynamic fracture of concrete.     

混凝土黏聚开裂模型若干进展

黏聚模型是用来描述混凝土断裂行为的基本模型, 首先介绍了混凝土的黏聚开裂模型的基本概念,总结了确定黏聚区的本构方程的各种方法,即直接单轴拉伸测试、J积分方法、R曲线法、柔度法和逆推法.然后介绍了黏聚模型在I型和复合型裂纹问题、疲劳断裂问题中的应用以及黏聚模型与混凝土尺寸效应的关系.最后对黏聚开裂模型与桥联模型、带状裂缝模型进行了比较和总结, 指出了该模型存在的问题, 并对其以后的发展方向提出了建议.      

Dynamic fracture of concrete – compact tension specimen

The behavior of concrete structures is strongly influenced by the loading rate. Compared to quasi-static loading concrete loaded by impact loading acts in a different way. First, there is a strain-rate influence on strength, stiffness, and ductility, and, second, there are inertia forces activated. Both influences are clearly demonstrated in experiments. Moreover, for concrete structures, which exhibit damage and fracture phenomena, the failure mode and cracking pattern depend on loading rate. In general, there is a tendency that with the increase of loading rate the failure mode changes from mode-I to mixed mode. Furthermore, theoretical and experimental investigations indicate that after the crack reaches critical speed of propagation there is crack branching. The present paper focuses on 3D finite-element study of the crack propagation of the concrete compact tension specimen. The rate sensitive microplane model is used as a constitutive law for concrete. The strain-rate influence is captured by the activation energy theory. Inertia forces are implicitly accounted for through dynamic finite element analysis. The results of the study show that the fracture of the specimen strongly depends on the loading rate. For relatively low loading rates there is a single crack due to the mode-I fracture. However, with the increase of loading rate crack branching is observed. Up to certain threshold (critical) loading rate the maximal crack velocity increases with increase of loading rate, however, for higher loading rates maximal velocity of the crack propagation becomes independent of the loading rate. The critical crack velocity at the onset of crack branching is found to be approximately 500 m/s.     

基于石膏材料的小结构重力坝损伤本构模型研究

大坝模型试验的模型材料力学性能是试验成功与否的关键影响因素。基于石膏模型材料基本力学性质和混凝土材料基本相似的实际情况,考虑石膏模型材料的孔隙率,在能量损伤理论模型的基础上,结合工程规范,建立了石膏模型材料的受拉损伤本构模型。同时,分析了模型材料应变率对材料峰值应力的影响,引入动应力提高系数,并给出了与应变率相关的模型材料受拉损伤本构模型。利用该本构模型模拟了动荷载下石膏模型重力坝的破坏过程,并与模型试验结果进行对比。结果表明：数值模拟得到的重力坝开裂破坏的位置、形式与模型试验结果较为接近。     

利用无网格方法分析斜拉破坏钢筋混凝土梁

从传统的混凝土分离裂缝模型和弥散裂缝模型出发，使用不同的模型模拟不同发展阶段的混凝土裂缝，并利用无网格方法可以灵活布置节点和边界的优点，使分离裂缝模型的使用得到很大的简化。通过在宏观裂缝表面布置基于试验结果的混凝土与混凝土界面单元，正确地模拟了裂缝表面抗剪能力的变化。算例表明，使用本文方法可以准确模拟斜拉破坏混凝土梁的破坏过程，且精度和数值稳定性要高于传统的有限元弥散裂缝方法。     

Damage accumulation and crack growth in bilinear materials with softening: Application of strain energy density theory

A pseudo-elastic damage-accumulation model is developed by application of the strain energy density theory. The three-point bending specimen is analyzed to illustrate the crack growth characteristics according to a linear elastic softening constitutive law that is typical of concrete materials. Damage accumulation is accounted for by the decrease of elastic modulus and fracture toughness. Both of these effects are assessed by means of the strain energy density functions in the elements around a slowly moving crack. The rate of change of the strain energy density factor S with crack growth as expressed by the relation dS/da = constant is shown to describe the failure behavior of concrete. Results are obtained for different loading steps that yield different slopes of lines in an S versus a (crack length) plot. The lines rotate about the common intersect in an anti-clockwise direction as the load steps are increased. The intersect shifts upward according to increase in the specimen size. In this way, the combined interaction of material properties, load steps and specimen geometry and size are easily analyzed in terms of the failure mode or behavior that can change from the very brittle to the ductile involving stable crack growth. An upper limit on specimen or structural size is established beyond which stable crack growth ceases to occur and failure corresponds to unstable crack propagation or catastrophic fracture. The parameters that control the failure mode are the threshold values of the strain energy density function (dW/dV)_c and the strain energy density factor S_c.     

Development of “event-to-event” nonlinear technique to lightly reinforced concrete beams by simplified constitutive modeling

The two-dimensional dual boundary element method is applied in this paper for the static analysis of lightly reinforced concrete beams, along with a nonlinear noniterative approach, called “event-to-event” technique. This numerical technique put some restrictions on the model development, such as continuity of the process of discrete crack growth and necessity of converting the constitutive law curves in a multi-linear form. The steel–concrete interaction is taken into account by employing a modification of a simplified bond slip model, known from the literature. A number of numerical examples are solved, analyzed and compared with results from experimental studies. A parametric study is carried out in order to reveal the specific features of the theory and to assess the potential of the numerical method, nonlinear technique and constitutive modeling employed.     

混凝土梁三点弯曲断裂模式转变的近场动力学模拟

混凝土结构的宏观损伤开裂与其非均质微观结构紧密相关。底部带切口的混凝土梁在进行三点弯曲破坏时,随着切口的位置由梁中向梁边转移,裂纹由从切口处萌生并生长转变为从梁的中部萌生。本文采用半均质化近场动力学（IH-PD）模型和全均质化近场动力学（FH-PD）模型,分别对混凝土梁三点弯断裂问题进行模拟研究。IH-PD模型根据混凝土中骨料体积分数随机生成不同键的组合方式,将微观尺度的非均质性引入模型,无需详细描绘骨料形状和分布即可考虑混凝土非均质性。本文将IH-PD与FH-PD模型得到的断裂模式随切口位置的变化关系,与实验结果对比,分析微观结构对混凝土梁开裂的影响;基于非均质材料特征尺寸与IH-PD模型网格参数的相关性,模拟骨料大小对混凝土梁断裂模式的影响;另外,通过在IH-PD模型中设置预损伤的方式引入随机分布的孔隙,探讨孔隙率对混凝土断裂模式的影响。     

基于近场动力学理论的准脆性材料的本构力函数的构建

近场动力学理论(PD)是基于非局部思想的连续介质力学新理论,用于研究材料破坏问题。根据准脆性材料破坏的线性和非线性的力学行为,在初始微观弹脆性材料(PMB)的本构力函数中引入了键的损伤模型,将键的断裂过程分成了线性的弹性变形阶段和非线性的损伤变形阶段,以此构建了准脆性材料的本构力函数的基本形式。以典型的准脆性材料为例构建了其本构力函数,通过在压缩载荷下对含预制不同角度单裂纹缺陷的类岩材料的裂纹扩展进行PD数值模拟仿真,裂纹起裂位置和扩展方向与试样试验结果在一定程度上保持了一致,证明了该基于近场动力学理论的典型准脆性材料的本构力函数可用于该类材料的破坏分析。     

Fractal effect and anisotropic constitutive model for concrete

An elasto-anisotropic damage constitutive model for concrete is developed in this work. Disregarding the coupling between the isotropic and the anisotropic damage, the isotropic damage variables are defined as functions of the microcrack fractal dimension, and the anisotropic parts are expressed by the lengths of cracks in concrete which various in different directions. The Helmholtz free energy is decomposed into the elastic deforming, damage and irreversible deforming components, with the last component used to replace the plastic deformation. Therefore the damage constitutive formulas for concrete are derived based on continuum damage mechanics. Evolution laws for both isotropic and anisotropic damage variables are derived, in which the anisotropic parts are obtained by modifying an empirical model. The critical fracture stress and the fracture toughness are investigated for materials with a single fractal crack based on the fractal geometry and the Griffith fracture criterion. Numerical computation is conducted for concrete under the uniaxial and the biaxial compression. The results indicate that the material stiffness degradation can be well addressed when the anisotropic damage is incorporated; the irreversible deformation is greatly related to the behavior of the descending branch beyond the peak load. The validation of the presented model is proofed by comparing results with the experimental data. This model provides an approach to link the macro properties of a material with its micro-structure change.     

Development of an approach to constitutive modelling of concrete: Isotropic damage coupled with plasticity

The paper presents an approach to constitutive modelling of concrete using damage mechanics and plasticity theory. The thermodynamic formulation, and parameter identification of a non-local coupled damage-plasticity model are presented in this study. The particular focus is the calibration of model parameters. It is shown that both the local parameters and the parameters governing the non-local interaction can be determined from experimental data reliably and consistently. A novel procedure is developed for parameter identification, using the separation of total dissipation energy into additive parts corresponding to different dissipation mechanisms. The relationship between the local and non-local parameters is also addressed, helping to obtain model responses consistent with the fracture energy of the material. The application of the model and the calibration procedure proposed in this study to the numerical failure analysis of concrete structures is illustrated through a series of real structural tests, showing both the performance of the model and the consistency of the proposed calibration procedure.     

基于三维细观模型的全级配混凝土静态力学性能的数值模拟

根据混凝土材料的细观组成和力学特性,研究了骨料几何形状和空间分布规律,建立全级配混凝土三维凸多面体随机细观模型,引入了混凝土细观组份材料的本构模型,分别模拟了单轴、双轴和三轴状态下混凝土的静态力学性能,并建立混凝土梁的三维宏细观分析模型,研究了三点弯曲梁的变形及裂缝扩展情况。结果表明,本文建立的细观力学模型的计算结果与实验数据吻合较好,可以较好地模拟各种复杂应力条件下混凝土的静态力学性能和损伤破坏机理。     

基于0.2定围压比状态下的约束混凝土性能研究

通过对混凝土施加0.2定围压比,使单轴受压混凝土裂缝发展受到约束,研究了混凝土在接近无裂纹发展状态下的受压力学性能。本文以在MTS815.02岩石电液伺服系统上对不同强度等级的混凝土试件在定围压比为0.2时的单调、循环加卸载受压常规三轴试验为基础,研究分析了0.2定围压比对混凝土受压应力-应变规律的影响和围压对混凝土裂缝发展的限制效果,并根据0.2定围压比下混凝土材料的特殊性能,提出了无裂纹发展状态下混凝土上升段表达式及参数。分析结果表明,0.2定围压比下,各强度混凝土本构关系均表现出了类似金属材料的本构关系,且低强混凝土试件应力-应变的提高幅度优于中强混凝土试件。综上所述,0.2定围压比改善了混凝土在受压时无征兆失效(脆性破坏)的力学性能。     

循环加载条件下混凝土Ⅰ型裂缝扩展模拟的接触算法

沿裂缝可能开展路径设置接触点对,把求解接触问题的有限元混合法进行扩展,以实现循环加载条件下混凝土Ⅰ型裂缝扩展的数值模拟.根据荷载过程状态和缝面接触状态的不同,将循环荷载作用下的混凝土本构关系抽象为力学模型中的六种不同接触状态,不同的接触状态对应着不同的位移-应力曲线关系.以缝面张开位移和接触应力作为接触状态转变的判断参量,并给出了各状态的转变关系和数值判断条件,以接触算法实现了循环加载条件下混凝土Ⅰ型断裂扩展的数值模拟.首先给出了有限元混合法求解接触问题的基本思路,然后引入循环荷载下的混凝土本构关系,再对Ⅰ型裂缝扩展的数值实现方法进行了阐述,最后通过数值算例说明了数值实现方法的正确性和有效性.     

Strong discontinuity analysis of a class of anisotropic continuum damage constitutive models – Part II: Concrete material application

On the basis of the strong discontinuity analysis, a discrete model expressed in terms of traction vector-displacement jump has been constructed from a continuous model expressed in terms of stress–strain law. In the first part of the paper, this approach has been extended to a class of anisotropic continuum damage constitutive models [1]. In this second part of the paper, the proposed class of discrete anisotropic damage constitutive models is particularized. More precisely, a micromechanical-based anisotropic damage constitutive model is derived. This model accounts in a natural manner for particular crack families orientation. The aims of this paper are (i) to illustrate the capabilities of the proposed discrete enhanced model in reproducing the induced anisotropy appearing in quasi-brittle materials when cracking and (ii) to assess the numerical robustness of the time integration scheme. For this purpose, two numerical examples at the material point level are exposed after a brief presentation of the time integration scheme. The correspondence between the continuous and the discrete model as well as the induced anisotropy features are emphasized.