软铁磁薄板磁弹性耦合作用的变分原理

研究磁弹性耦合问题的关键是正确计算作用在铁磁弹性体上的磁力，该文以磁场系统的磁能与磁介质弹性板应变能之和作为软铁磁薄板位于外加磁场合作用系统的能量泛函，以磁标势函数和位移函数的变分为独立变量，给出软铁磁薄板在任意外磁场中磁弹性耦俣作用变分原理，由此不仅导出磁和结构变形的联立控制方程，而且获得作用在薄板上的磁力表达式，进而可以对两类不同性质的铁磁板耦合作用的实验现象进行理论模拟     

悬臂铁磁板磁弹性耦合作用的力学分析

对有限板宽的悬臂铁磁板在外磁场中的磁弹性相互耦合作用的力学行为，建立了描述板弯曲和稳定性的理论模型及有限元定量分析程序，研究了外磁场倾斜角对板磁弹性失稳的临界磁场值的影响。     

软铁磁薄板磁弹性屈曲的理论模型

铁磁弹性薄板的磁弹性屈曲问题一直作为电磁——弹性力学相互作用的一个基本模型进行研究，而作用在其磁介质上的磁力计算则是定量理论预测准确与否的关键．到目前为止，文献上已有的理论模型对悬臂铁磁梁式悬臂板在横向磁场中磁弹性屈曲的理论预测值始终高于实验值，有的甚至相差１００％左右．本文基于电磁力计算的微观安培电流模型，严格给出了软铁磁薄板等效横向磁力的宏观计算表达式．在此基础上，建立了电磁——力学相互耦合作用的非线性理论模型．该模型能描述铁磁薄板结构在非均匀横向磁场环境中的磁弹性失稳（或屈曲）．其定量分析采用了有限元法和有限差分法相结合．数值结果显示：本模型给出的磁弹性屈曲的临界磁场值与实验值符合良好．与此同时，文中还对文献中认为较成功的Ｍｏｏｎ－Ｐａｏ模型的基本假设进行了分析．定量结果发现：Ｍｏｏｎ－Ｐａｏ理论模型的基本假设仅在梁式板的长厚比Ｌ／ｈ比较大时（约在２００左右），是可以接受的，而当Ｌ／ｈ较小时，该假设将导致理论值与实验值的较大误差．Ｌ／ｈ比值越小，理论值与实验值的误差越大     

Buckling and post-buckling analysis for magneto-elastic–plastic ferromagnetic beam-plates with unmovable simple supports

This paper presents an analysis of buckling/snapping, bending and post-buckling/snapping behaviors of magneto-elastic–plastic interaction and coupling for soft ferromagnetic beam-plates with geometrically nonlinear deformation and unmovable simple supports at the ends of the plates. Based on the expression of magnetic force from the variational principle of ferromagnetic plates, the theory of thin plates with the nonlinear deformation of van Karman’s type, and the Mises yield criterion and the increment theory for plastic deformation, here, we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-coupling problems by the finite element method. Along with that the phenomena of buckling, bending, and post-buckling/snapping, or the characteristic curve of deflection versus magnitude of applied magnetic fields are numerically displayed, the critical values of buckling/snapping and yield magnetic fields, and the expansibility of plastic region after the plates undergo plastic deformation with increasing of the applied magnetic fields, as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.     

斜磁场作用下铁磁梁式板的磁场摄动分析

基于磁场摄动技术和广义变分原理得到的磁力公式,对铁磁梁式板在斜磁场作用下的磁场和磁力摄动展开研究.给出了考虑磁场端部效应情形时铁磁梁式板的摄动磁场及其磁力摄动表达式,使得解析分析斜磁场作用下铁磁梁式板磁弹性耦合问题成为可能.研究表明:只有考虑了磁场端部效应的斜磁场磁力摄动公式才能模拟铁磁结构的弯曲模式且能够定性揭示铁磁简支梁式板弯曲构形为双半波形.     

A theoretical model of magnetoelastic bucking for soft ferromagnetic thin plates

As an essential model of magnetoelastic interaction between magnetic field and mechanical deformation, the study on magnetoelastic buckling phenomenon of soft ferromagnetic plates in a magnetic environment has been conducted. One of the key steps for the theoretical prediction of the critical magnetic field is how to formulate magnetic force exerted on the magnetized medium. Till today, the theoretical predictions, from theoretical models in publications, of the magnetoelastic buckling of ferromagnetic cantilevered beam-plate in transverse magnetic field are all higher than their experimental data. Sometimes, the discrepancy between them is as high as 100%. In this paper, the macroscope formulation of the magnetic forces is strictly obtained from the microscope Amperion current model. After that, a new theoretical model is established to describe the magnetoelastic buckling phenomenon of ferromagnetic thin plates with geometrically nonlinear deformation in a nonuniform transverse magnetic field. The numerical method for quantitative analysis is employed by combining the finite elemental method for magnetic fields and the finite difference method for deformation of plates. The numerical results obtained from this new theoretical model show that the theoretical predictions of critical values of the buckling magnetic field for the ferromagnetic cantilevered beam-plate are in excellent agreement with their experimental data. By the way, the region of applicability to the Moon-Pao's model, or the couple model, is checked by quantitative results. This project was supported in part by the National Natural Science Foundation of China and the Foundation of the SEdC of China for Returned Chinese Scholars from Abroad.     

ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented.Based on the expression of magnetic force from the variational principle of ferromagnetic plates,the buckling and bending theory of thin plates,the Mises yield criterion and the increment theory for plastic deformation,we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method.Along with the phenom- ena of buckling/snapping and bending,or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed,the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads,the plastic regions expanding with the magnitude of applied magnetic field,as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.     

Modified H-R mixed variational principle for magnetoelectroelastic bodies and state-vector equation

Based upon the Hellinger-Reissner (H-R) mixed variational principle for three-dimensional elastic bodies, the modified H-R mixed variational theorem for magnetoelectroelastic bodies was established. The state-vector equation of magnetoelectroelastic plates was derived from the proposed theorem by performing the variational operations. To lay a theoretical basis of the semi-analytical solution applied with the magnetoelectroelastic plates, the state-vector equation for the discrete element in plane was proposed through the use of the proposed principle. Finally, it is pointed out that the modified H-R mixed variational principle for pure elastic, single piezoelectric or single piezomagnetic bodies are the special cases of the present variational theorem.     

Changes in the natural frequency of a ferromagnetic rod in a magnetic field due to magnetoelastic interaction

Based on the magnetoelastic generalized variational principle and Hamilton＇s principle, a dynamic theoretical model characterizing the magnetoelastic interaction of a soft ferromagnetic medium in an applied magnetic field is developed in this paper. From the variational manipulation of magnetic scale potential and elastic displacement, all the fundamental equations for the magnetic field and mechanical deformation, as well as the magnetic body force and magnetic traction for describing magnetoelastic interaction are derived. The theoretical model is applied to a ferromagnetic rod vibrating in an applied magnetic field using a perturbation technique and the Galerkin method. The results show that the magnetic field will change the natural frequencies of the ferromagnetic rod by causing a decrease with the bending motion along the applied magnetic field where the magnetoelastic buckling will take place, and by causing an increase when the bending motion of the rod is perpendicular to the field. The prediction by the mode presented in this paper qualitatively agrees with the natural frequency changes of the ferromagnetic rod observed in the experiment.     

ANALYSES ON NONLINEAR COUPLING OF MAGNETO-THERMO-ELASTICITY OF FERROMAGNETIC THIN SHELL I： GENERALIZED VARIATIONAL THEORETICAL MODELING

Based on the generalized variational principle of magneto-thermo-elasticity of the ferromagnetic elastic medium, a nonlinear coupling theoretical modeling for a ferromagnetic thin shell is developed. All governing equations and boundary conditions for the ferromagnetic shell are obtained from the variational manipulations on the magnetic scalar potential, temperature and the elastic displacement related to the total energy functional. The multi-field couplings and geometrical nonlinearity of the ferromagnetic thin shell are taken into account in the modeling. The general modeling can be further deduced to existing models of the magneto-elasticity and the thermo-elasticity of a ferromagnetic shell and magneto-thermo-elasticity of a ferromagnetic plate, which are coincident with the ones in literature.     

梯度弹性基础上正交异性薄板的弯曲

基于能量法和变分原理,采用双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板在分布载荷作用下的弯曲问题。首先,根据能量法与变分原理,给出了梯度弹性基础上正交异性薄板的弯曲微分平衡方程,并得到了梯度弹性基础刚度系数 与 的计算表达式;进而,假设 向正应力在厚度方向上均匀分布,推导了弹性基础 向位移衰减函数 的计算式。在算例中,通过将梯度弹性基础退化为均质基础,并与Vlazov模型对比,证明了本文理论的正确性;最后,求解了弹性模量呈幂律分布的梯度基础上薄板的挠度分布,分析了基础上下表层材料弹性模量比 与体积分数指数 对薄板挠度分布的影响。     

Decay and other estimates for a semi-infinite magnetoelastic cylinder: Saint-Venant''s principle

An analogue of the well known Toupin's version of Saint-Venant's principle is proved for a semi-infinite magnetoelastic cylinder under very mild assumptions on the asymptotic behaviour of the Dirichlet integral of the magnetic field and of the elastic energy. With regard to the elastic fields, we assign on the base either the stress or the displacement vector while we assume that the lateral surface is either traction free or held fixed at zero displacement. We make use of the first Korn inequality and estimate the total energy of the conductor in terms of the data for all the problems considered.     

Subregion generalized variational principles for elastic thick plates

Tn this paper, the subregion generalized variational principle for elastic thick plates is proposed. Its main points may be stated as follows:1. Each subregion may be assigned arbitrarily as a potential region or complementary region. The subregion variational principles of potential energy, complementary energy and mixed energy represent three special forms of this principle.2. The number of independent variational variables in each sub-region may be assigned arbitrarily. Any one of the subregions may be assigned as a one-variable-region, two-variable-region or three-variable-region.3. The conjunction conditions of displacements and stresses on each interline of neighbouring subregions may be relaxed. On the basis of this principle the finite element analysis of non-conforming elements for thick plates can be formulated.Different finite element models for thick plates can be obtained by different applications of this principle. In particular,the subregion mixed variational principle for thick plates may be applied to formulating the subregion mixed finite element method for thick plates.     

梯度弹性基础上正交异性薄板的屈曲分析

基于双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板的屈曲问题. 首先,基于能量法与变分原理,给出了梯度弹性基础上正交异性薄板的屈曲控制方程,并得到了梯度弹性基础刚度系数K₁ 与K₂的计算式;进而,通过将位移函数采用三角函数展开的方法,给出了单向压缩载荷作用下、四边简支正交异性弹性基础板屈曲载荷的计算式;在算例中,通过将该文的解退化到单纯的正交异性板,并与经典弹性解比较,证明了理论的正确性;最后,求解了弹性模量在厚度方向上呈幂律分布的梯度基础上的薄板屈曲问题,分析了基础上下表层材料弹性模量比与体积分数指数对屈曲载荷的影响.     

基于广义应变梯度理论的纳米梁挠曲电效应研究

挠曲电效应是应变梯度与电极化的耦合，它存在于所有的电介质材料中。在纳米电介质结构的挠曲电效应研究中，应变梯度弹性对挠曲电响应的影响一直以来被低估甚至被忽略了。根据广义应变梯度理论，应变梯度弹性中独立的尺度参数只有三个，而文献中所采用的一个或两个尺度参数的应变梯度理论只是它的简化形式。基于该理论，论文建立了考虑广义应变梯度弹性的三维电介质结构的理论模型，并以一维纳米梁为例研究了其弯曲问题的挠曲电响应及其能量俘获特性。结果表明，纳米梁的挠曲电响应存在尺寸效应，并且弹性应变梯度会影响结构挠曲电的尺寸效应，特别是当结构的特征尺寸低于尺度参数时。论文的工作为更进一步理解纳米尺度下的挠曲电机理和能量俘获特性提供理论基础和设计依据。     

复合材料层合板的二次屈曲和二次分枝点分析

为了研究复合材料层合板的二次分叉特性 ,利用能量变分原理和非线性几何方程建立了具有弹性约束的复合材料层合板在面内载荷作用下的非线性稳定性控制方程组。控制方程组用广义傅立叶级数法进行求解 ,并得到载荷 -挠度曲线。基于分叉理论中的 Lerray-Schaulder定理 ,采用小挠动法 ,直接导出了复合材料层合板的二次失稳方程。研究结果表明 ,非对称层板也可能存在分叉 ,弹性转动支持系数和铺层等因素对二次分叉有很重要的影响。随着弹性系数的增大 ,二次失稳载荷值与初次失稳载荷值之比下降     

加筋板结构的大变形

本文对受均布载荷，具有一根纵向加筋多根横向加筋的加筋板结构的残余变形导出了近似理论分析方法。从假设变形模态出发，依据极限分析原理获得可能变形模态和模态判别条件。在变形分析中，计及膜力（轴力）影响，但忽略弹性影响，得到了各变形模态下的残余变形估算公式。最后根据本文的理论分析方法和ＡＤＩＮＡ程序作了实例计算，两者的变形模态和最大残余变形均十分一致     

ANALYSES ON NONLINEAR COUPLING OF MAGNETO-THERMO-ELASTICITY OF FERROMAGNETIC THIN SHELL-Ⅰ: GENERALIZED VARIATIONAL THEORETICAL MODELING

Based on the generalized variational principle of magneto-thermo-elasticity of the ferromagnetic elastic medium, a nonlinear coupling theoretical modeling for a ferromagnetic thin shell is developed. All governing equations and boundary conditions for the ferromagnetic shell are obtained from the variational manipulations on the magnetic scalar potential, temperature and the elastic displacement related to the total energy functional. The multi-field couplings and geometrical nonlinearity of the ferromagnetic thin shell are taken into account in the modeling. The general modeling can be further deduced to existing models of the magneto-elasticity and the thermo-elasticity of a ferromagnetic shell and magneto-thermo-elasticity of a ferromagnetic plate, which axe coincident with the ones in literature.     

非连续变形计算力学模型的粘弹性分析方法Ⅰ:基本理论

基于粘弹性广义有限单元和接触力元，发展了适用于多体相互作用系统非连续变形分析的粘弹性数值分析方法，通过虚功原理，给出了其分区参变量最小势能原理，从而阐明了其理论基础。粘弹性广义有限单元的本构关系可由粘弹性退化为弹性或刚性，因此本文所提出的方法可对由刚体、弹性体和粘弹性体所构成的复杂多体系统在外荷载作用下的力学行为进行数值模拟，同时能够比本文精确地直接得到多体之间的接触应力。     

Analytical and numerical studies of free vibration frequencies of ferromagnetic plates with arbitrary electric conductance in a transverse magnetic field in the 3D setting

The problem on the vibrations of a magnetoelastic ferromagnetic plate was studied in [1–5] from the viewpoint of the averaging approach, i.e., on the basis of the classical Kirchhoff hypothesis. In [6–10], a new approach proposed for elastic plates in [11] was used to derive dispersion relations for magnetoelastic plates. In [10], the 3D approach was used to obtain the ferromagnetic plate vibration frequencies; in the case of a transverse magnetic field, the equations of the perturbed motion of the plates were written out with the initial stresses taken into account [5, 12] but without considering the initial strains. In [13, 14], the problems on the vibrations of conducting plates in a magnetic field were studied.In the present paper, we derive the dispersion equations, which are asymptotic equations for small magnetic fields and exact equations for the initial stresses and strains related by Hooke’s law. The corresponding numerical computations are also performed.