聚变堆相关的液态金属膜流初步实验研究

在磁约束核聚变堆的面对等离子部件设计中,液态金属锂膜流因具有带走杂质、保护面对等离子固壁等优点而被认为是优选方案之一.然而,如何克服聚变堆中强磁场环境下产生的磁流体力学效应并形成大面积均匀铺展锂膜流动是目前亟需解决的问题.本文通过搭建室温液态镓铟锡回路和高温液态锂回路,开展了两种不同特性的液态金属膜流实验,并采用传统可视化方法获得了展向磁场存在时镓铟锡和锂在导电底板形成的液膜流动表面特征.实验结果表明:无磁场时,两种液态金属膜流流动表面波动特性与常规流体膜流均一致,即随着流动雷诺数的增加表面波动变得更为混乱;而展向磁场存在时,镓铟锡膜流表面波动变得更为规则,且沿着磁场方向平行排列,表现为拟二维波动的特征;而锂膜流却产生了明显的磁流体力学阻力效应,表现为在流动方向局部产生锂滞留现象,且滞留点随雷诺数增大向下游移动.最后通过膜流受力分析,进一步阐述了锂膜流受到比镓铟锡膜流更为严重磁流体力学效应影响的原因.     

倾斜非均匀磁场下导电方管磁流体管流的数值模拟研究

热核聚变反应堆液态金属包层应用中的一个重要问题是液态金属在导电管中流动和强磁场相互作用产生的额外的磁流体动力学压降.这种磁流体动力学压降远远大于普通水力学压降.美国阿贡国家实验室ALEX研究小组,对非均匀磁场下导电管中液态金属磁流体动力学效应进行了实验研究,其实验结果成为液态金属包层数值验证的标准模型之一.液态金属包层在应用中会受到不同方向的磁场作用,本文以ALEX的非均匀磁场下导电方管中液态金属管流实验中的一组参数为基础,保持哈特曼数、雷诺数和壁面电导率不变,采用三维直接数值模拟的方法,研究了外加磁场与侧壁之间的倾角对导电方管内液态金属流动的速度、电流和压降分布的影响.研究结果表明:沿流向相同横截面上的速度、电流以及压力分布均随磁场的倾斜而同向旋转.倾斜磁场均匀段,横截面上的高速区位于平行磁场方向的哈特曼层和平行层交叉位置,压力梯度随磁场倾角的增大先增大后减小.倾斜磁场递减段,在三维磁流体动力学效应作用下,横截面上的高速射流位置向垂直磁场方向偏移.磁场递减段的三维磁流体动力学压降随磁场倾角的增大而增大.随磁场倾斜,截面上的射流峰值逐渐减小,二次流增强,引发层流向湍流的转捩.      

倾斜非均匀磁场下导电方管磁流体管流的数值模拟研究

热核聚变反应堆液态金属包层应用中的一个重要问题是液态金属在导电管中流动和强磁场相互作用产生的额外的磁流体动力学压降.这种磁流体动力学压降远远大于普通水力学压降.美国阿贡国家实验室ALEX研究小组,对非均匀磁场下导电管中液态金属磁流体动力学效应进行了实验研究,其实验结果成为液态金属包层数值验证的标准模型之一.液态金属包层在应用中会受到不同方向的磁场作用,本文以ALEX的非均匀磁场下导电方管中液态金属管流实验中的一组参数为基础,保持哈特曼数、雷诺数和壁面电导率不变,采用三维直接数值模拟的方法,研究了外加磁场与侧壁之间的倾角对导电方管内液态金属流动的速度、电流和压降分布的影响.研究结果表明:沿流向相同横截面上的速度、电流以及压力分布均随磁场的倾斜而同向旋转.倾斜磁场均匀段,横截面上的高速区位于平行磁场方向的哈特曼层和平行层交叉位置,压力梯度随磁场倾角的增大先增大后减小.倾斜磁场递减段,在三维磁流体动力学效应作用下,横截面上的高速射流位置向垂直磁场方向偏移.磁场递减段的三维磁流体动力学压降随磁场倾角的增大而增大.随磁场倾斜,截面上的射流峰值逐渐减小,二次流增强,引发层流向湍流的转捩.     

磁流体流动控制中的磁场配置效率研究

采用数值模拟方法研究了不同磁场空间构型对弹道式再入飞行器基准外形表面热流分布的影响. 计算模型为低磁雷诺数近似下的磁流体力学模型. 数值模拟结果表明两个大小相同、方向不同的磁偶极子对表面热流密度分布的影响存在较大差异,由此指出热流控制应用中磁场配置的效率问题. 随后的磁场详细作用机理分析表明上述差异的原因在于不同空间磁场分布对流动能量转化机制的影响不同. 以此为基础给出了在流动的不同区域,磁场空间分布应遵循的一般性原则.      

高超声速MHD球头激波脱体距离理论求解

高超声速飞行器强激波后高温气体形成具有导电性的等离子体流场, 电离气体为磁场应用提供了直接工作环境, 磁流体流动控制技术利用外加磁场影响激波后的离子或电子运动规律, 这可以有效改善高超声速飞行器气动特性. 激波脱体距离作为高超声速磁流体流动控制较为直观的气动现象, 受到研究者重点关注; 磁场添加后激波脱体距离发生变化, 其变化幅度直接反映磁控效果, 然而基于高超声速磁流体流动控制的相关理论模型较少, 需要进一步发展. 本文基于低磁雷诺数假设和偶极子磁场分布的条件, 通过对连续方程沿径向积分以及对动量方程采用分离变量的方法, 推导了高超声速磁流体流动控制下的球头激波脱体距离解析表达式. 理论分析结果表明, 激波脱体距离随着磁相互作用系数的增加而变大; 随着来流速度的增加, 磁相互作用系数变为影响激波脱体距离大小的主要因素. 本文理论模型可以达到快速评估磁控效果的目的, 对高超声速磁流体流动控制实验方案设计和结果分析具有一定的指导意义.      

界面剪切力作用下波状液膜流的水动力稳定性

液膜流的水动力稳定性作为保障其高效传热传质性能的重要因素之一,受多种因素的制约和影响. 当气液界面处存在因气流流动而产生剪切力作用时,剪切力将通过改变界面处的边界条件,从而影响液膜流动的稳定性. 基于边界层理论,采用积分法建立了剪切力作用下降液膜表面波演化方程,分析了界面剪切力对水动力稳定性的影响. 研究表明,正向剪切力为不稳定性因素,反向剪切力在较小雷诺数时为不稳定因素,在大雷诺数时为稳定性因素;正向剪切力使临界波数和临界波速增大,反向剪切力使其减小;剪切力对临界波速的影响在不同雷诺数下也有所不同.      

镓铟锡液滴撞击泡沫金属表面的运动学特性研究

常温下为液态的镓铟锡合金以其优异的导热性能在具有特殊要求的传热领域有着重要的应用价值,与传统流动介质相比较大的表面张力使得其产生的流动现象必有所区别.本文研究镓铟锡所形成的液滴撞击泡沫金属表面后所产生的铺展、回缩及回弹现象.采用高速相机拍摄液滴投影轮廓随液滴运动的变化过程,并通过图像处理获得不同撞击速度、底板表面孔径下的液滴铺展系数、中心位置轮廓高度以及液滴回弹后在空中的振动特性.研究结果表明:具有较高表面张力的镓铟锡液滴的铺展系数随无量纲时间的变化在铺展初始阶段仍满足常规流体的1/2次幂关系,只在铺展后期与底板的无量纲孔径有关系;液滴的最大铺展系数在较小无量纲孔径底板大于在光滑镍板,且随底板无量纲孔径增大而逐渐减小;在回弹过程,由于底板孔隙结构的存在使得液滴回弹后在空中的振动呈现3种形态:规则的横向和纵向振动、带旋转的横向和纵向振动以及旋转振动;最后,通过对振动频率的拟合和分析,进一步拓展了传统振动频率理论公式在非规则振动过程预测中的应用.      

镓铟锡液滴撞击泡沫金属表面的运动学特性研究

常温下为液态的镓铟锡合金以其优异的导热性能在具有特殊要求的传热领域有着重要的应用价值,与传统流动介质相比较大的表面张力使得其产生的流动现象必有所区别.本文研究镓铟锡所形成的液滴撞击泡沫金属表面后所产生的铺展、回缩及回弹现象.采用高速相机拍摄液滴投影轮廓随液滴运动的变化过程,并通过图像处理获得不同撞击速度、底板表面孔径下的液滴铺展系数、中心位置轮廓高度以及液滴回弹后在空中的振动特性.研究结果表明:具有较高表面张力的镓铟锡液滴的铺展系数随无量纲时间的变化在铺展初始阶段仍满足常规流体的1/2次幂关系,只在铺展后期与底板的无量纲孔径有关系;液滴的最大铺展系数在较小无量纲孔径底板大于在光滑镍板,且随底板无量纲孔径增大而逐渐减小;在回弹过程,由于底板孔隙结构的存在使得液滴回弹后在空中的振动呈现3种形态:规则的横向和纵向振动、带旋转的横向和纵向振动以及旋转振动;最后,通过对振动频率的拟合和分析,进一步拓展了传统振动频率理论公式在非规则振动过程预测中的应用.     

部分电极结构单极机的磁流体力学一维流动理论

本文提出了用待定电极壁边值并分区衔接的方法,完整地求解了环管中部分电极单极机的磁流体力学一维流动问题.做为两个特例,研究了环线电极和通常的全电极结构的单极机.对一些典型参数下的流场和感应磁场的分布进行了数值计算.与差分计算的结果比较,在数值和分布两方面都相当符合.着重研究了弥散效应及哈特曼边界层这些磁流体力学的特征现象,并用这些概念去讨论单极机的内部流动现象.结果表明,部分电极结构可以增加环管的流量,改善哈特曼边界层,控制二次流的发展.这些作用对具体的单极机应用有一定实用价值.     

气体速度对液膜在预膜板表面流动形态影响的LBM模拟

为了探究气流剪切作用对航空燃油在气动雾化喷嘴预膜板上流动形态的影响,首先对基于相场理论的两相流格子Boltzmann模型进行修正,并通过经典算例验证了修正后模型的准确性和可靠性.随后利用该模型模拟了同向气流驱动下液膜在水平预膜板表面上的流动,分析了气流速度对液膜流动形态的影响规律.研究表明,该模型可准确追踪具有大密度比的气液相界面的形态变化;气液剪切速度差会诱发两相界面出现Kelvin-Helm-holtz不稳定性现象,因而当气体速度升高时,气液剪切速度差增大,不仅液膜流动速度随之增高,且在铺展阶段液膜会产生较高振幅的波浪面并加快铺展过程,自由表面波动增强.     

Viscous lifting and drainage of a conducting fluid in the presence of a transverse magnetic field

A theoretical investigation of the effects of a transverse magnetic field on the combined problem of viscous lifting and drainage of a conducting fluid on a plate is presented. The effects of inertia and transverse magnetic field on the liquid film thickness is studied for two cases namely a plate withdrawn with a constant velocity and one withdrawn with a constant acceleration. The expressions for the flow rate and the free surface profiles are obtained for the above two cases. It is found that the free surface profiles are convex in nature as in the non-magnetic case thus showing that the inertia does not effect the general pattern of flow, and the effect of the magnetic field is to retard both the lifting and drainage of the fluid.     

磁场对液态金属流的制动效应

研究在静磁场作用下；连铸坯中液态金属的流动，建立了二维数学模型并考虑了湍流的影响．采用数值分析方法分析了磁场对液态金属流股的制动效应．计算结果说明静磁场可以有效地减小流股速度并使其分散，同时使上升到液态金属液面的反转流减弱．随着哈特曼数增高和雷诺数的减小，磁场的制动效应增强．     

Flow stability of a conducting liquid flowing down an inclined plane in the presence of a magnetic field

The stability of a steady flow of incompressible, conducting liquid down an inclined plane in the presence of longitudinal and transverse magnetic fields is studied. Solutions of the linearized magnetohydrodynamic equations with corresponding boundary conditions are found on the assumption that the Reynolds number R_g and the wave number are small. It is shown that the longitudinal magnetic field plays a stabilizing role. It is known [1] that the flow of a viscous liquid over a vertical wall is always unstable. In this article it is shown that the instability effect at small wave numbers may be eliminated if the longitudinal magnetic field satisfies the conditions found. The case when the Alfvén number and the wave number are small and the Reynolds number is finite is also examined.     

An analytical solution to the heat transfer problem in thick-walled hunt flow

The flow of a liquid metal in a rectangular duct, subject to a strong transverse magnetic field is of interest in a number of applications. An important application of such flows is in the context of coolants in fusion reactors, where heat is transferred to a lead-lithium eutectic. It is vital, therefore, that the heat transfer mechanisms are understood. Forced convection heat transfer is strongly dependent on the flow profile. In the hydrodynamic case, Nusselt numbers and the like, have long been well characterised in duct geometries. In the case of liquid metals in strong magnetic fields (magnetohydrodynamics), the flow profiles are very different and one can expect a concomitant effect on convective heat transfer. For fully developed laminar flows, the magnetohydrodynamic problem can be characterised in terms of two coupled partial differential equations. The problem of heat transfer for perfectly electrically insulating boundaries (Shercliff case) has been studied previously (Bluck et al., 2015). In this paper, we demonstrate corresponding analytical solutions for the case of conducting hartmann walls of arbitrary thickness. The flow is very different from the Shercliff case, exhibiting jets near the side walls and core flow suppression which have profound effects on heat transfer.     

Effect of Hall current on MHD natural convection flow from vertical permeable flat plate with uniform surface heat flux

The effect of the Hall current on the magnetohydrodynamic (MHD) natural convection flow from a vertical permeable flat plate with a uniform heat flux is analyzed in the presence of a transverse magnetic field.It is assumed that the induced magnetic field is negligible compared with the imposed magnetic field.The boundary layer equations are reduced to a suitable form by employing the free variable formulation (FVF) and the stream function formulation (SFF).The parabolic equations obtained from FVF are numer...     

Effects of magnetohydrodynamic flow past a vertical plate with variable surface temperature

An analysis is performed to study the magnetohydrodynamic flow of an electrically conducting, viscous incompressible fluid past a semi-infinite vertical plate with variable surface temperature under the action of transversely applied magnetic field. The heat due to viscous dissipation and the induced magnetic field are assumed to be negligible. The dimensionless governing equations are unsteady, two-dimensional, coupled and non-linear governing equations. It is found that the magnetic field parameter has a retarding effect on the velocities of air and water.     

Stability of flow of a thin layer of viscous magnetic liquid

The laminar flow of a thin layer of heavy viscous magnetic liquid down an inclined wall is examined. The stability and control of the flow of an ordinary liquid are affected only by alteration of the angle of inclination of the solid wall and the velocity of the adjacent gas flow. When magnetic liquids are used [1, 2], an effective method of flow control may be control of the magnetic field. By using magnetic fields of various configurations it is possible to control the flow of a thin film of viscous liquid, modify the stability of laminar film flow, and change the shape of the free surface of the laminarly flowing thin film, a factor which plays a role in mass transfer, whose rate depends on the phase contact surface area. The magnetic field significantly affects the shape of the free surface of a magnetic liquid [3, 4]. In this paper the velocity profile of a layer of viscous magnetic liquid adjoining a gas flow and flowing down an inclined solid wall in a uniform magnetic field is found. It is shown that the flow can be controlled by the magnetic field. The problem of stability of the flow is solved in a linear formulation in which perturbations of the magnetic field are taken into account. The stability condition is found. The flow stability is affected by the nonuniform nature of the field and also by its direction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 59–65, September–October, 1977.     

UDV measurements of single bubble rising in a liquid metal Galinstan with a transverse magnetic field

Liquid metal is an important type of energy transport carrier in nuclear reactors, such as in accelerator-driven sub-critical systems, fusion reactors and spallation neutron source devices. It is necessary to conduct research for bubbles rising in a liquid metal under different magnetic field intensities. The Perspex container is positioned concentrically inside a transverse magnetic field, which provides a homogeneous DC longitudinal magnetic field that passes through the fluid district. The coils are supplied with maximum field strength of 1.97 T. The equivalent diameter of the bubble is 3.1–5.6 mm. The Ultrasonic Doppler Velocimetry (UDV) method is used to evaluate the internal flow velocity of opaque liquid metals. Research shows that the influence of the Lorenz force on the bubble ascension velocity is not simply positive or negative. The magnetic field inhibits the ascension velocity of small bubbles with diameters of 3.1 mm and 3.4 mm. The terminal velocity for large bubbles with diameters of 4.57 mm, 5.15 mm and 5.6 mm is higher under a weak magnetic field than without a magnetic field. The positive effect happens under strong magnetic intensity. The target is to obtain the hydro-dynamical relationships between the terminal velocity, drag coefficient, the Eötvös number, Reynolds number, and Stuart number in a strong magnetic field using a multiple regression method to reveal that the mechanism of the induced current's restraining influence determines the ascension velocity of the bubble in viscous electric liquids with a strong magnetic field.