单轴荷载下饱水岩石静态和动态抗压强度的细观力学分析

由于单轴荷载下饱水岩石的动态力学特性与静态力学特性存在很大差异,从宏观上进行力学分析 存在局限性。根据岩石受压全应力应变曲线的细观机制,分析了静态及动态单轴荷载条件下孔隙水影响饱水 岩石裂纹扩展的情况。在静态单轴压缩条件下,初始裂隙受压使自由水产生孔隙水压力,自由水对翼裂纹有 向外挤压的应力,促进裂纹扩展。在动态单轴压缩条件下,自由水会产生粘结力,抑制裂纹扩展。根据翼裂纹 受压扩展原理,推导出饱水单轴条件下动态抗压强度、静态抗压强度的计算公式,在相同断裂韧度下,饱水岩 石静态抗压强度风干岩石静态抗压强度饱水岩石动态抗压强度。对自然风干和饱水砂岩进行单轴静态、 动态压缩实验,结果与理论模型的结果相符。     

压缩载荷作用下岩石的细观损伤和塑性研究

建立岩石微裂纹扩展的细观力学模型,研究了岩石的细观损伤和塑性性质.压缩载荷下微裂纹尖端翼裂纹稳定扩展表征岩石的细观损伤,采用应变能密度准则求解复合型断裂的翼裂纹扩展长度,微裂隙统计的二参数Weibull函数模型反映绝对体积应变对微裂纹分布数目影响,进而用翼裂纹扩展所表征的应力释放体积和微裂纹数目来表示含有微裂隙的岩石损伤演化变量;宏观塑性屈服函数采用Voyiadjis等的等效塑性应变的硬化函数,反映了塑性内变量对硬化函数的影响;建立岩石模型的本构关系及其数值算法,并用回映隐式积分算法编制了模型的本构程序.分析弹塑性损伤模型的围压对岩石损伤的影响,并从围压和短微裂隙长度等因素分析模型的岩石的损伤和宏观塑性特性.     

动荷载下岩石裂纹动态扩展行为实验研究综述

岩石的动态裂纹扩展特性在岩石力学和岩石工程研究中具有重要意义。动荷载下岩石中裂纹的扩展行为是瞬间发生的，这对实验中测试和加载技术具有很大的挑战性。为综述动荷载下岩石材料裂纹扩展研究取得的丰硕成果，总结了岩石动态裂纹扩展测试技术、实验设备和实验方法等方面的最新进展。首先，讨论了动态岩石裂纹扩展测试的各种测量技术（X射线计算机断层扫描技术、焦散线法、数字图像相关法、裂纹扩展计、导电碳膜测试方法、声发射）；然后，以应变率为主线，从低到高依次总结了中低应变率、高应变率和超高应变率下岩石内裂纹动态扩展行为研究，系统讨论了落锤冲击装置、霍普金森压杆、爆炸实验中对裂纹扩展测试的实验方法和动态裂纹扩展特性，总结了不同应变率条件下岩石裂纹的起裂、扩展、止裂及动态断裂韧度等的演变规律。     

侧向受拉脆性岩石压缩本构及蠕变失效研究

轴向压缩作用下,脆性岩石侧向应力严重影响岩石力学特性。侧向压应力影响下的轴向压缩岩石力学行为已经得到广泛研究,然而侧向拉应力对轴向压缩岩石力学行为影响研究很少。本文基于脆性岩石翼型裂纹扩展模型中,初始裂纹面法向应力与剪切应力的正负方向为判断依据,研究了侧向拉应力对轴向压缩力学行为的影响。发现恒定的侧向拉应力作用下,轴向压缩应力渐进变化过程中,脆性岩石内部细观初始裂纹面的法向应力只能为压缩应力,不存在拉应力情况。分析了从侧向压应力到拉应力转化过程中,脆性岩石轴向压应力与细观裂纹扩展长度关系、轴向压应力与轴向应变关系、岩石峰值强度、裂纹启裂应力及初始弹性模量的变化规律。并分析了侧向拉应力对岩石蠕变裂纹长度、裂纹速率、轴向应变及应变率演化曲线,以及对蠕变失效时间及稳态蠕变应变率的影响。讨论了侧向拉压应力突变转化以及侧向拉应力分级增大对轴向压缩岩石蠕变演化行为影响。该研究为深部地下工程围岩稳定性评价提供了一定理论依据。     

陶瓷材料动态压缩损伤本构模型

运用细观损伤力学理论,从动态压缩载荷下陶瓷材料内翼型裂纹的产生和扩展的损伤机理出发,建立了陶瓷材料的弹脆性动态损伤本构模型,给出相应的损伤演化方程.假设裂纹成核满足Weibull分布,讨论了成核分布参数、原始缺陷尺寸对材料动态断裂应力、断裂应变的影响,并用动态损伤演化模型计算了冲击载荷下AD90陶瓷的动态应力应变曲线,计算结果和实验结果符合很好.     

传爆药静态压缩力学性能及损伤特性研究

为研究聚黑-14C（JH-14C）传爆药静态压缩力学性能及损伤特性,开展准静态压缩实验,获得了不同应变率下的应力-应变曲线,建立了描述不同应变率下JH-14C力学行为的非线性本构模型;利用扫描电镜（SEM）对回收试样进行细微形貌观测,获得了准静态压缩JH-14C损伤特性的表征。结果表明:JH-14C压缩强度随应变率的升高而提高;实验与计算结果对照验证了本构模型的有效性;准静态压缩实验中,JH-14C主要损伤模式为脱湿和穿晶断裂。     

考虑应变率效应的混凝土随机损伤本构模型研究

混凝土材料组分复杂且具有随机分布的特点, 其受力力学行为不可避免地存在非线性和随机性. 同时, 在动力荷载作用下, 混凝土材料具有不可忽视的率敏感性. 为了综合反映混凝土受力力学行为中的非线性、随机性与率敏感性, 本文从对材料的纳-微观裂纹扩展分析入手, 引入速率过程理论描述纳观裂纹的扩展速率, 并研究了对应的能量耗散过程. 在此基础上通过裂纹层级模型将纳观分析推演到微观尺度, 建立了微观能量耗散的基本表达式. 进而与微-细观随机断裂模型相结合, 形成了混凝土纳-微-细观随机损伤本构模型. 同时, 基于速率相关势垒的分析, 揭示了动力强度的提高源自加载速率和原子键断裂速率的竞争机制. 据此, 假定微裂纹间相互作用与应变率比值的相关关系以建立微弹簧能量耗散速率与应变率的联系, 实现了从静力本构模型向动力本构模型的扩展. 数值算例表明, 建议模型能够同时反映混凝土材料力学行为中的非线性、随机性和率敏感性. 最后通过与相关试验结果的对比, 验证了建议模型的正确性.      

动力损伤后的脆性岩石静力蠕变断裂模型研究

应力波动力扰动下脆性岩石的静力蠕变特性,对深部地下工程围岩变形的评价有重要的实践意义.动力载荷作用导致的局部细观裂纹损伤严重影响脆性岩石蠕变力学行为.基于细观裂纹扩展与应力关系模型、动力扰动损伤演化函数、静动力载荷演化路径函数与黏弹性本构模型,提出一种应力波动力扰动下脆性岩石蠕变断裂特性的宏细观力学模型.其中动力损伤通过控制岩石内部细观裂纹数量变化实现.模型描述了应力波动力扰动下岩石的应变时间演化曲线,解释了岩石动力扰动下蠕变失效特性.研究了不同应力波幅值及周期影响下的脆性岩石应变-时间关系曲线,并通过试验结果验证了模型的合理性.讨论了动力损伤变化形式,突变发生时刻,突变量的大小对岩石蠕变失效特性的影响.分析了应力波幅值、周期对岩石动态动力损伤效应以及蠕变失效特性的影响.主要研究结果:动力损伤的变化值越大,岩石蠕变失效发生时间越短.冲击载荷扰动期间,动力损伤发生的时刻及增加的形式,对动力扰动后的岩石应变及蠕变破坏时间影响很小.动力损伤变化量随应力波幅值增加、周期减小而加速增大.应力波幅值越大、周期越小,岩石发生蠕变失效时间越短.     

考虑微裂纹相互作用的的岩石微观力学弹塑性损伤模型研究

本文建立基于微裂纹扩展的岩石弹塑性损伤微观力学模型。用自洽方法考虑裂隙间相互影响,压缩载荷下微裂纹尖端翼裂纹稳定扩展表征岩石的微观损伤,基于应变能密度准则用Newton迭代法求复合型断裂的翼裂纹扩展长度,并采用微裂隙统计的二参数Weibull函数模型反映绝对体积应变对微裂纹分布数目影响,进而用翼裂纹扩展所表征的应力释放体积和微裂纹数目来表示含有微裂隙的岩石损伤演化变量;宏观塑性屈服函数采用Voyiadjis等的等效塑性应变的硬化函数,反映塑性内变量对硬化函数的影响;建立岩石的弹塑性损伤本构关系及其数值算法,并用回映隐式积分算法编制了弹塑性损伤模型的程序。从围压和微裂隙长度等因素分析弹塑性损伤模型的岩石的损伤和宏观塑性特性。     

采用压缩单裂纹圆孔板确定岩石动态起裂、扩展和止裂韧度

爆炸、冲击、地震等人为或自然灾害不可避免,经常造成大量土木工程设施的破坏,因此岩石在动态载荷作用下的行为受到特别关注.岩石动态断裂韧度是评价岩石抵抗裂纹动态起裂、扩展和止裂性能的材料参数,开展岩石动态断裂韧度测试方法的研究对相关理论基础和实验技术的要求较高.岩石动态断裂韧度分为动态起裂、动态扩展、动态止裂三种,虽然关于动态起裂和动态扩展的研究已有一些成果,对岩石动态止裂的研究仍是一个难题,至今几乎无人问津.研究表明,在分离式霍普金森压杆撞击压缩单裂纹圆孔板岩石试样的I型动态断裂试验中,动态起裂、扩展、止裂的全过程可以由黏贴在压缩单裂纹圆孔板试样上的裂纹扩展计监测,岩石的动态起裂、扩展、止裂韧度可以用实验-数值-解析法确定.特别值得一提的是首次测出了岩石的动态止裂韧度.裂纹扩展计信号还显示,压缩单裂纹圆孔板在止裂后,停止的裂纹还会再次动态起裂、扩展并超出裂纹扩展计的检测范围.从能量的角度分析了动态止裂的过程,指出测试动态止裂韧度时要注意的一些问题.结果显示,岩石动态起裂韧度和动态扩展韧度分别随动态加载率和裂纹扩展速度的增大而增大,岩石动态起裂韧度略大于动态止裂韧度.      

Upper and lower bounds for constitutive relation of crack-weakened rock masses under dynamic compressive loads

A micro-mechanics-based model is proposed to investigate the rate-dependent constitutive relation for crack-weakened rock masses subjected to dynamic compressive loads. The present micro-mechanical model reveals that the nucleation, growth and coalescence of sliding cracks dominate the failure and macroscopic properties of crack-weakened rock masses subjected to dynamic compressive loads. The interactions among multiple parallel sliding cracks in crack-weakened rock masses subjected to dynamic compressive loads are examined asymptotically in an explicit and quantitative manner in order to reveal fully their so-called shielding and magnification effects on the stress–strain relation. Based on the micro-mechanical framework and the asymptotic analysis, analytical upper and lower bounds are proposed for the rate-relation for rock masses containing multiple rows of echelon cracks subjected to dynamic compressive loads. The factors that affect the rate-dependent properties of crack-weakened rock masses have been analyzed. The strain energy density factor approach, which is related to crack growth velocity and dynamic fracture toughness of rock material, is employed in the analysis. The rate-dependent constitutive relation of crack-weakened rock masses is derived from micro-mechanical framework and the asymptotic analysis. The closed-form explicit expression for the rate-dependent constitutive relation of rock masses containing echelon cracks subjected to dynamic compressive loads is obtained. Finally, the present model is used to analyze the complete stress–strain relation and strength for jointed rock masses at shiplock slope of the Three Gorges Dam.     

A micro–macro method for predicting the shear strength of brittle rock under compressive loading

Microcracks have great significance for shear strength of brittle rock in compression. A major challenge of this area is to establish the correlation of microcracks and macroscopic shear strength. A new micro–macro method is presented to predict the shear strength of brittle rock in compression. This method incorporates the microcrack model suggested by Ashby, Mohr–Coulomb failure criterion and a crack-strain relation. This crack–strain relation is presented to link the crack growth and axial strain by combining the micro and macro definitions from rock damage. The shear strength and stress–strain relationship of Jinping marble are theoretically investigated in detail. The rationality of this suggested method is verified by using the experimental results founded on Jinping marble. Effects of the initial microcrack size, friction coefficient and confining pressure on internal friction angle, cohesion, and shear strength are also discussed.     

Localization of deformation and stress–strain relation for mesoscopic heterogeneous brittle rock materials under unloading

Stress redistribution induced by excavation of underground engineering and slope engineering results in the unloading zone in parts of surrounding rock masses. The mechanical behaviors of crack-weakened rock masses under unloading are different from those of crack-weakened rock masses under loading. A micromechanics-based model has been proposed for brittle rock material undergoing irreversible changes of their microscopic structures due to microcrack growth when axial stress is held constant while lateral confinement is reduced. The basic idea of the present model is to classify the constitution relation of rock material into four stages including some of the stages of linear elasticity, pre-peak nonlinear hardening, rapid stress drop, and strain softening, and to investigate their corresponding micromechanical damage mechanisms individually. Special attention is paid to the transition from structure rearrangements on microscale to the macroscopic inelastic strain, to the transition from distribution damage to localization of damage and the transition from homogeneous deformation to localization of deformation. The closed-form explicit expression for the complete stress–strain relation of rock materials containing cracks under unloading is obtained. The results show that the complete stress–strain relation and the strength of rock materials under unloading depend on the crack spacing, the fracture toughness of rock materials, orientation of the cracks, the crack half-length and the crack density parameter.     

Dynamic toughness in elastic nonlinear viscous solids

This work addresses the interrelationship among dissipative mechanisms—material separation in the fracture process zone (FPZ), nonelastic deformation in the surrounding background material and kinetic energy—and how they affect the macroscopic dynamic fracture toughness as well as the limiting crack speed in strain rate sensitive materials. To this end, a micromechanics-based model for void growth in a nonlinear viscous solid is incorporated into a microporous strip of cell elements that forms the FPZ. The latter is surrounded by background material described by conventional constitutive relations. In the first part of the paper, the background material is assumed to be purely elastic. Here, the computed dynamic fracture toughness is a convex function of crack velocity. In the second part, the background material as well as the FPZ are described by similar rate-sensitivity parameters. Voids grow in the strain rate strengthened FPZ as the crack velocity increases. Consequently, the work of separation increases. By contrast, the inelastic dissipation in the background material appears to be a concave function of crack velocity. At the lower crack velocity regime, where dissipation in the background material is dominant, toughness decreases as crack velocity increases. At high crack velocities, inelastic deformation enhanced by the inertial force can cause a sharp increase in toughness. Here, the computed toughness increases rapidly with crack velocity. There exist regimes where the toughness is a non-monotonic function of the crack velocity. Two length scales—the width of the FPZ and the ratio of the shear wave speed to the reference strain rate—can be shown to strongly affect the dynamic fracture toughness. Our computational simulations can predict experimental data for fracture toughness vs. crack velocity reported in several studies for amorphous polymeric materials.     

综合考虑宏细观缺陷的岩体动态损伤本构模型

针对节理岩体同时含有节理、裂隙等宏观缺陷及微裂隙、微孔洞等细观缺陷的客观事实, 提出了在节理岩体动态损伤本构模型中应同时考虑宏细观缺陷的观点。为此, 首先对基于细观动态断裂机理的经典岩石动态损伤本构模型—TCK(Taylor-Chen-Kuszmaul)模型进行了阐述, 其次基于Lemaitre等效应变假设推导了综合考虑宏细观缺陷的复合损伤变量(张量), 进而在此基础上建立了相应的节理岩体动态损伤本构模型, 并利用该模型讨论了载荷应变率及节理条数对岩体动态力学特性的影响规律。结果表明, 在不同载荷应变率下试件在变形初始阶段是重合的, 而后随着应变的增加, 试件峰值强度、峰值应变及总应变均随载荷应变率的增加而增加; 随着节理条数的增加, 试件峰值强度逐渐降低, 但降低趋势逐渐变缓并趋于某一定值。上述研究结论与目前的理论及实验研究结果的基本规律是一致的, 说明了本模型的合理性。     

脆性断裂的微观机理和非平衡统计特性

Ⅰ.引言如何才能将断裂的微观机理与宏观特性结合起来,把断裂理论建立于微裂纹演化的微观动力学基础上,从而统一导出所有重要的宏观力学量并以某些更基本的物理量表示之?这是人们为实现材料的强度和韧性设计必需解决的一个重要理论课题。就脆性断裂来说,尽管现有几个主要代表性的理论如断裂力学理论、位错理论和统计理论都各取得一定成就,但就其理论框架来说,由于明显的局限性,却难以发展成可供指导设计的理论。因此,人们在探索微观与宏观相结合的断裂理论。最近的工作表明:从微裂纹演      

Dynamic damage constitutive relation of mesoscopic heterogenous brittle rock under rotation of principal stress axes

A micro-mechanics-based model is developed to investigate microcrack damage mechanism of four stages of brittle rock under rotation of the principal stress axes. They consist of linear elastic, non-linear hardening, rapid stress drop and strain softening. The frictional sliding crack model is applied to analyze microcracks nucleation, propagation and coalescence. The strain energy density factor approach is applied to determine the critical condition of microcrack nucleation, propagation and coalescence. The inelastic strain increments are formulated within the framework of thermodynamics with internal variables. Rotation of principal stress axes affect the dynamic damage constitutive relationship and the failure strength of brittle rock.     

ANALYSIS OF THE LOCALIZATION OF DAMAGE AND THE COMPLETE STRESS-STRAIN RELATION FOR MESOSCOPIC HETEROGENEOUS ROCK UNDER UNIAXIAL TENSILE LOADING

The mechanical behavior of rock under uniaxial tensile loading is different from that of rock under compressive loads. A micromechanics-based model was proposed for mesoscopic heterogeneous brittle rock undergoing irreversible changes of their microscopic structures due to microcrack growth. The complete stress-strain relation including linear elasticity, nonlinear hardening, rapid stress drop and strain softening was obtained. The influence of all microcracks with different sizes and orientations were introduced into the constitutive relation by using the probability density function describing the distribution of orientations and the probability density function describing the distribution of sizes. The influence of Weibull distribution describing the distribution of orientations and Rayleigh function describing the distribution of sizes on the constitutive relation were researched. Theoretical predictions have shown to be consistent with the experimental results.