基于整体局部1,3位移模式的层合板层间应力研究

为提高层合板层间应力计算的准确性,对Reddy型高阶剪切理论的基本位移模式进行改进,提出整体-局部1,3高阶位移模式．在满足层间位移连续,层间剪切应力连续,以及上下表面自由的条件下,与前人提出的整体-局部1,2-3位移模式相比,层合板板结构每个节点的独立变量由13缩减到11,并且不随层数的增加而变化．将整体-局部1,3高阶位移模式位移和应力的数值解与解析解进行对比,验证了整体-局部1,3位移模式的准确性,可应用于复合材料层合板的位移和应力分析．     

材料非线性对复合材料层合板热自由边界效应的影响

本文用准三维有限元法研究了材料非线性对复合材料层合板热自山边界效应的影响,给出了修正型Hahn-Tsai非线性应力-应变关系的三维形式。由本文非线性分析方法得到的层间应力与以往由线性分析方法得到的层间应力做了比较,结果表明:材料非线性能显著降低层间剪应力的集中程度,但对层间正应力影响不太明显。     

Layup optimization with GA for tapered laminates with internal plydrops

Layup optimization of the maximum strength of laminated composites with internal ply-drops is performed by genetic algorithm (GA). Interlaminar stresses are considered in estimating the strength of laminates and calculated by the stress function based complementary virtual work principle. Out-of-plane stress functions are expanded in terms of harmonic series through the thickness direction and initially satisfied the traction free boundary conditions of laminates automatically. As the number of expansion terms is increased, stress concentration near the dropped plies is predicted with better accuracy. Since the proposed analysis is relatively simple and efficient in the prediction of interlaminar stress concentration near the ply-drops, the layup optimization of composite laminates with dropped plies considering interlaminar strength can be easily performed by GA. In the formulation of genetic algorithm, a repair strategy is adopted to satisfy given constraints and multiple elitism scheme is implemented to efficiently find multiple global optima or near-optima.     

含椭圆孔非对称层合板的Green函数

运用作者建立的复合材料层合板问题的求解方法，得到了含椭圆孔和裂纹的无限大非对称层合板在广义集中载荷作用下的Ｇｒｅｅｎ函数．利用这些结果可研究含孔或裂纹的非对称层合板在集中载荷作用下的力学行为，还可结合边界元方法对复杂层合板结构建立有效的数值分析方法     

基于逆复合二次径向基函数的对称复合材料层合板自由振动分析

利用逆复合二次径向基函数无网格配点法对Reddy的高阶剪切变形理论进行离散,预测了对称复合材料层合板的自由振动特性.将不同材料参数、几何尺寸和边界条件的层合板固有频率计算结果与相关文献中的结果进行对比,结果表明:逆复合二次径向基函数在对称复合材料层合板自由振动分析方面具有收敛性好及精度高等一系列优点.     

有限长压电层合简支板自由振动的三维精确解

基于三维弹性理论和压电理论，导出了有限长矩形压电层合简支板的动力学方程及相应的边界条件，给出了一种求解压电层合板自由振动三维精确解的方法；分析了正、逆向压电效应对层合板振动频率的影响．本文所述的方法和结果对于求解其他三维动态问题，验证、比较其他简化模型、有限元计算结果以及工程应用都有指导意义．     

Interlaminar hygrothermal stresses in laminated plates

Within the elasticity formulation the most general displacement field for hygrothermal problems of long laminated composite plates is presented. The equivalent single-layer theories are then employed to determine the global deformation parameters appearing in the displacement fields of general cross-ply, symmetric, and antisymmetric angle-ply laminates under thermal and hygroscopic loadings. Reddy’s layerwise theory is subsequently used to determine the local deformation parameters of various displacement fields. An elasticity solution is also developed in order to validate the efficiency and accuracy of the layerwise theory in predicting the interlaminar normal and shear stress distributions. Finally, various numerical results are presented for edge-effect problems of several cross-ply, symmetric, and antisymmetric angle-ply laminates subjected to uniform hygrothermal loads. All results indicate high stress gradients of interlaminar normal and shear stresses near the edges of laminates.     

Numerical analysis of edge effect in laminated composite structures

In order to further study free edge effect in composite laminates, a new method is developed. This method is based on the perturbation and modified method of least square. In this paper, we emphatically discuss the solution within the boundary layer region, the socalled inner solution. As an example, we will discuss structures composed of two and four symmetric laminates. Project Supported by the Science Fund of the Chinese Academy of Science.     

NONLINEAR THREE-DIMENSIONAL ANALYSIS OF COMPOSITELAMINATED PLATES

ＮＯＮＬＩＮＥＡＲＴＨＲＥＥ－ＤＩＭＥＮＳＩＯＮＡＬＡＮＡＬＹＳＩＳＯＦＣＯＭＰＯＳＩＴＥＬＡＭＩＮＡＴＥＤＰＬＡＴＥＳ￥(江晓禹，张相周，陈百屏)ＪｉａｎｇＸｉａｏｙｕ；（ＳｏｕｔｈｗｅｓｔｅｒｎＪｉａｏｔｏｎｇＵｎｉｖｅｒｓｉｔｙ，Ｃｈｅｎｇｄｕ６...     

多椭圆孔有限大复合材料层板的应力研究

基于经典层板理论，将复合材料层板的弹性问题化归为均匀各向异性板求解，采用各向异性体平面弹性理论中的复势方法，以Ｆａｂｅｒ级数、保角映射及最小二乘边界配置技术为工具，提出了多椭圆孔有限大层板在任意外载作用下的级数解，详细探讨了各参数对孔边应力分布的影响规律，得到了许多有益结论。     

Extended Kantorovich method for local stresses in composite laminates upon polynomial stress functions

The extended Kantorovich method is employed to study the local stress concentrations at the vicinity of free edges in symmetrically layered composite laminates subjected to uniaxial tensile load upon polynomial stress functions. The stress fields are initially assumed by means of the Lekhnitskii stress functions under the plane strain state. Applying the principle of complementary virtual work, the coupled ordinary differential equations are obtained in which the solutions can be obtained by solving a generalized eigenvalue problem. Then an iterative procedure is estab-lished to achieve convergent stress distributions. It should be noted that the stress function based extended Kantorovich method can satisfy both the traction-free and free edge stress boundary conditions during the iterative processes. The stress components near the free edges and in the interior regions are calculated and compared with those obtained results by finite element method (FEM). The convergent stresses have good agreements with those results obtained by three dimensional (3D) FEM. For generality, various layup configurations are considered for the numerical analysis. The results show that the proposed polynomial stress function based extended Kan-torovich method is accurate and efficient in predicting the local stresses in composite laminates and computationally much more efficient than the 3D FEM.     

Mechanical behaviour of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity

This work presents a new multi-layer laminated composite structure model to predict the mechanical behaviour of multi-layered laminated composite structures. As a case study, the mechanical behaviour of laminated composite beam (90°/0°/0°/90°) is examined from both a static and dynamic point of view. The results are compared with the model “Sinus” and finite element method studied by Abou Harb. Results show that this new model is more precise than older ones as compared to the results by the finite element method (Abaqus). To introduce continuity on the interfaces of each layer, the kinematics defined by Ossadzow was used. The equilibrium equations and natural boundary conditions are derived by the principle of virtual power. To validate the new proposed model, different cases in bending, buckling and free vibration have been considered.     

An enhanced beam-theory model of the mixed-mode bending (MMB) test—Part I: Literature review and mechanical model

The paper presents a mechanical model of the mixed-mode bending (MMB) test used to assess the mixed-mode interlaminar fracture toughness of composite laminates. The laminated specimen is considered as an assemblage of two sublaminates partly connected by an elastic–brittle interface. The problem is formulated through a set of 36 differential equations, accompanied by suitable boundary conditions. Solution of the problem is achieved by separately considering the two subproblems related to the symmetric and antisymmetric parts of the loads, which for symmetric specimens correspond to fracture modes I and II, respectively. Explicit expressions are determined for the interfacial stresses, internal forces, and displacements.     

Analytical solutions to edge effect of composite laminates based on symplectic dual system

In the symplectic space composed of the original variables, displacements, and their dual variables, stresses, the symplectic solution for the composite laminates based on the Pipes-Pagano model is established in this paper. In contrast to the traditional technique using only one kind of variables, the symplectic dual variables include displacement components as well as stress components. Therefore, the compatibility conditions of displacement and stress at interfaces can be formulated simultaneously. After being introduced into the symplectic dual system, the uniform schemes, such as the separation of variables and symplectic eigenfunction expansion method, can be implemented conveniently to analyze composite laminate problems. An analytical solution for the free edge effect of composite laminates is obtained, showing the effectiveness of the symplectic dual method in analyzing composite laminates.     

Large deflection analysis of the moderately thick general theta ply laminated plates on nonlinear elastic foundation with various boundary conditions

This paper presents a powerful method i.e. the kinetic Dynamic Relaxation for analyzing general theta ply laminated plates, resting on nonlinear elastic foundation with different boundary conditions. Comprehensive comparison and parametric studies prove accuracy and efficiency of the proposed approach with interesting specifications such as fully vector calculations, independency to configuration, situation and angle of plies so that general theta ply laminated plate with simultaneous coupling between membrane, bending and shear strains could be analyzed as simple as analyzing of symmetric cross ply plate. Moreover, the proposed technique could simply satisfy complicated boundary conditions such as free and movable edges.     

复合材料层合板自由振动分析的无网格自然邻接点Petrov-Galerkin法

基于一阶剪切变形理论,提出了复合材料层合板自由振动分析的无网格自然邻接点Petrov-Galerkin法。计算时在复合材料层合板中面上仅需要布置一系列的离散节点,并利用这些节点构建插值函数。在板中面上的局部多边形子域上,采用加权余量法建立复合材料层合板自由振动分析的离散化控制方程,并且这些子域可由Delaunay三角形方便创建。自然邻接点插值形函数具有Kronecker delta函数性质,因而无需经过特别处理就能准确地施加本质边界条件。对不同边界条件、不同跨厚比、不同材料参数和不同铺设角度的复合材料层合板,由本文提出的无网格自然邻接点Petrov-Galerkin法进行自由振动分析时均可得到满意的结果。数值算例结果表明,本文方法求解复合材料层合板的自由振动问题是行之有效的。     

Stiffness reduction of cracked general symmetric laminates using a variational approach

In this paper, stiffness reduction of general symmetric laminates containing a uniform distribution of matrix cracks in a single orientation is analyzed. An admissible stress field is considered, which satisfies equilibrium and all the boundary and continuity conditions. This stress field has been used in conjunction with the principle of minimum complementary energy to get the effective stiffness matrix of a cracked general symmetric laminate. Natural boundary conditions have been derived from the variational principle to overcome the limitations of the existing variational methods on the analysis of general symmetric laminates. Therefore, the capability of analyzing cracked symmetric laminates using the variational approach has been enhanced significantly. It has been shown that the method provides a rigorous lower bound for the stiffness matrix of a cracked laminate, which is very important for practical applications. Results derived from the developed method for the properties of the cracked laminates showed an excellent agreement with experimental data and with those obtained from McCartney’s stress transfer model. The differences of the developed model with McCartney’s model are discussed in detail. It can be emphasized that the current approach is simpler than McCartney’s model, which needs an averaging procedure to obtain the governing equations. Moreover, it has been shown that the existing variational models are special cases of the current formulation.     

3-D numerical study on the bending of symmetric composite laminates

３－ＤＮＵＭＥＲＩＣＡＬＳＴＵＤＹＯＮＴＨＥＢＥＮＤＩＮＧＯＦＳＹＭＭＥＴＲＩＣＣＯＭＰＯＳＩＴＥＬＡＭＩＮＡＴＥＳＣｈｉｅｎＷｅｉ－ｚａｎｇ（钱伟长）;ＨｕａｎｇＱｉａｎ（黄默）;ＦｅｎｇＷｅｉ（冯伟）（ＳｈａｎｇｈａｉＵｎｉｖｅｒｓｔｙｏｆＴｅｃ...     

Thermal bending analysis of laminated orthotropic plates by the generalized differential quadrature method

The interlaminar stresses in a thin laminated rectangular orthotropic plate with four sides simply supported edges under bending was determined by using the generalized differential quadrature (GDQ) method involving the effects of thermal expansion strain and transverse load. The approximate stress and displacement solutions are obtained under the effects of thermal expansion force and uniform pressure load for eight-layer unidirectional laminates, symmetric cross-ply laminates. Numerical results on the dominant interlaminar stresses and displacement of bending analysis are compared to the Navier solution. The thermal induced forces have significant effect on the bending of plates.     

Component-wise analysis of laminated anisotropic composites

This paper proposes a one-dimensional (1D) refined formulation for the analysis of laminated composites which can model single fibers and related matrices, layers and multilayers. Models built by means of an arbitrary combination of these four components lead to a component-wise analysis. Different scales can be used in different portions of the structure and this leads to a global–local approach. In this work, computational models were developed in the framework of finite element approximations. The 1D FE formulation used has hierarchical features, that is, 3D stress/strain fields can be detected by increasing the order of the 1D model used. The Carrera Unified Formulation (CUF) was exploited to obtain advanced displacement-based theories where the order of the unknown variables over the cross-section is a free parameter of the formulation. Taylor- and Lagrange-type polynomials were used to interpolate the displacement field over the element cross-section. Lagrange polynomials permitted the use of only pure displacements as unknown variables. The related finite element led straightforwardly to the assembly of the stiffness matrices at the structural element interfaces (matrix-to-fiber, matrix-to-layer, layer-to-layer etc). Preliminary assessments with solid model results are proposed in this paper; various numerical examples were carried out on cross-ply symmetrical fiber-reinforced laminates [0/90/0] and a more complex composite C-shaped model. The examples show that the proposed models can analyze laminated structures by combining fibers, matrices, layers and multilayers and by referring to a unique structural finite element formulation.