Mixed convection flow in narrow vertical ducts

The mixed convection flow in a vertical duct is analysed under the assumption that , the ratio of the duct width to the length over which the wall is heated, is small. It is assumed that a fully developed Poiseuille flow has already been set up in the duct before heat from the wall causes this to be changed by the action of the buoyancy forces, as measured by a buoyancy parameter . An analytical solution is derived for the case when the Reynolds numberRe, based on the duct width, is of 0 (1). This is extended to the case whenRe is 0 (^–1) by numerical integrations of the governing equations for a range of values of representing both aiding and opposing flows. The limiting cases, || 1 andR=Re of 0 (1), andR and both large, with of 0 (R ^1/3) are considered further. Finally, the free convection limit, large with R of 0 (1), is discussed.

---

Mischkonvektion in engen senkrechten Rohren

Zusammenfassung Mischkonvektion in einem senkrechten Rohr wird unter der Voraussetzung untersucht, daß das Verhältnis der Rohrbreite zur Länge, über welche die Wand beheizt wird, klein ist. Es wird angenommen, daß sich bereits eine voll entwickelte Poiseuille-Strömung in dem Rohr eingestellt hat, bevor Antriebskräfte, gemessen mit dem Auftriebsparameter , aufgrund der Wandbeheizung die Strömung verändern. Es wird eine analytische Lösung für den Fall erhalten, daß die mit der Rohrbreite als charakteristische Länge gebildete Reynolds-ZahlRe konstant ist. Dies wird mittels einer numerischen Integration der wichtigsten Gleichungen auf den FallRe =f (^–1) sowohl für Gleich- als auch für Gegenstrom ausgedehnt. Weiterhin werden die beiden Grenzfälle betrachtet, wenn || 1 undR=Re konstant ist, sowieR und beide groß mit proportionalR ^1/3. Schließlich wird der Grenzfall der freien Konvektion, großes mit konstantem R, diskutiert.

---

Nomenclature g acceleration due to gravity - Gr Grashof number - G modified Grashof number - h duct width - l length of the heated section of the duct wall - p pressure - Pr Prandtl number - Q flow rate through the duct - Q ₀ heat transfer on the wally=0 - Q ₁ heat transfer on the wally=1 - Re Reynolds number - R modified Reynolds number - T temperature of the fluid - T ₀ ambient temperature - T applied temperature difference - u, velocity component in thex-direction - v, velocity component in they-direction - x, co-ordinate measuring distance along the duct - y, co-ordinate measuring distance across the duct - buoyancy parameter - ₀ modified buoyancy parameter, ₀=R ^–1/3 - coefficient of thermal expansion - ratio of duct width to heated length, =h/l - (non-dimensional) temperature - _w applied temperature on the wally=0 - kinematic viscosity - density of the fluid - ₀ shear stress on the wally=0 - ₁ shear stress on the wally=1 - stream function     

Die Torsionsspannungen in Wellen mit tiefen Längsnuten

Übersicht MitF(x, y) als Spannungsfunktion einer Welle ohne Nut und(, y) als Potentialfunktion des Quelle-Senke-Systems erhält man Spannungsfunktionen(, y) =F(x, y) –(, y) für Wellen mit tiefen Längsnuten. Es wird gezeigt, daß sich damit die Schubspannungen in den Läufern von Schraubenverdichtern ermitteln lassen.

---

Shearing stresses in shafts with deep longitudinal grooves

Summary The stress functions(, y) of shafts with deep longitudinal grooves may be represented by(, y) =F(x, y) –(, y) whereF(x, y) is the stress function of a cylindrical shaft without grooves and(, y) denotes the potential function of the source-sink system. It is shown that the shearing stresses in rotors of screw-compressors may be obtained in this way.

     

The wedge subjected to tractions: a paradox resolved

The classical two-dimensional solution provided by Lévy for the stress distribution in an elastic wedge, loaded by a uniform pressure on one face, becomes infinite when the opening angle 2 of the wedge satisfies the equation tan 2 = 2. Such pathological behavior prompted the investigation in this paper of the stresses and displacements that are induced by tractions of O(r ^–) as r0. The key point is to choose an Airy stress function which generates stresses capable of accommodating unrestricted loading. Fortunately conditions can be derived which pre-determine the form of the necessary Airy stress function. The results show that inhomogeneous boundary conditions can induce stresses of O(r ^–), O(r ^– ln r), or O(r ^– ln² r) as r0, depending on which conditions are satisfied. The stress function used by Williams is sufficient only if the induced stress and displacement behavior is of the power type. The wedge loaded by uniform antisymmetric shear tractions is shown in this paper to exhibit stresses of O(ln r) as r0 for the half-plane or crack geometry. At the critical opening angle 2, uniform antisymmetric normal and symmetric shear tractions also induce the above type of stress singularity. No anticipating such stresses, Lévy used an insufficiently general Airy stress function that led to the observed pathological behavior at 2.     

Optical co-ordinates in general relativity 2 — the problem of distance

Summary Let denote the congruence of null geodesics associated with a given optical observer inV ₄. We prove that determines a unique collection of vector fieldsM₍₎ ( =1, 2, 3) and ₍₀₎ overV ₄, satisfying a weak version of Killing's conditions.This allows a natural interpretation of these fields as the infinitesimal generators of spatial rotations and temporal translation relative to the given observer. We prove also that the definition of the fieldsM₍₎ and ₍₀₎ is mathematically equivalent to the choice of a distinguished affine parameter f along the curves of, playing the role of a retarded distance from the observer.The relation between f and other possible definitions of distance is discussed.

---

Sommario Sia la congruenza di geodetiche nulle associata ad un osservatore ottico assegnato nello spazio-tempoV ₄. Dimostriamo che determina un'unica collezione di campi vettorialiM₍₎ ( =1, 2, 3) e ₍₀₎ inV ₄ che soddisfano una versione in forma debole delle equazioni di Killing. Ciò suggerisce una naturale interpretazione di questi campi come generatori infinitesimi di rotazioni spaziali e traslazioni temporali relative all'osservatore assegnato. Dimostriamo anche che la definizione dei campiM₍₎, ₍₀₎ è matematicamente equivalente alla scelta di un parametro affine privilegiato f lungo le curve di, che gioca il ruolo di distanza ritardata dall'osservatore. Successivamente si esaminano i legami tra f ed altre possibili definizioni di distanza in grande.

---

---

Work performed in the sphere of activity of: Gruppo Nazionale per la Fisica Matematica del CNR.     

Free convection heat transfer from an isothermal plate with arbitrary inclination

This paper presents a new formulation for the laminar free convection from an arbitrarily inclined isothermal plate to fluids of any Prandtl number between 0.001 and infinity. A novel inclination parameter is proposed such that all cases of the horizontal, inclined and vertical plates can be described by a single set of transformed equations. Moreover, the self-similar equations for the limiting cases of the horizontal and vertical plates are recovered from the transformed equations by setting=0 and=1, respectively. Heated upward-facing plates with positive and negative inclination angles are investigated. A very accurate correlation equation of the local Nusselt number is developed for arbitrary inclination angle and for 0.001 Pr .

---

Wärmeübertragung bei freier Konvektion an einer isothermen Platte mit beliebiger Neigung

Zusammenfasssung Diese Untersuchung stellt eine neue Formulierung der laminaren freien Konvektion von Flüssigkeiten mit einer Prandtl-Zahl zwischen 0,001 und unendlich an einer beliebig schräggestellten isothermen Platte dar. Ein neuer Neigungsparameter wird eingeführt, so daß alle Fälle der horizontalen, geneigten oder vertikalen Platte von einem einzigen Satz transformierter Gleichungen beschrieben werden können. Die unabhängigen Gleichungen für die beiden Fälle der horizontalen and vertikalen Platte wurden für=0 und=1 aus den transformierten Gleichungen wieder abgeleitet. Es wurden erwärmte aufwärtsgerichtete Platten mit positiven und negativen Neigungswinkeln untersucht. Eine sehr genaue Gleichung wurde für die lokale Nusselt-Zahl bei beliebigen Neigungswinkeln und für 0,001 Pr entwickelt.

---

Nomenclature C _p specific heat - f reduced stream function - g gravitational acceleration - Gr local Grashof number,g(T _w –T _w ) x³/v² - h local heat transfer coefficient - k thermal conductivity - n constant exponent - Nu local Nusselt number,hx/k - p pressure - Pr Prandtl number, v/ - Ra local Rayleigh number,g(T _w –T )J x³/v - T fluid temperature - T _w wall temperature - T temperature of ambient fluid - u velocity component in x-direction - v velocity component in y-direction - x coordinate parallel to the plate - y coordinate normal to the plate Greek symbols thermal diffusivity - thermal expansion coefficient - (Ra¦sin¦)^1/4/( Ra cos()^1/5 - pseudo-similarity variable, (y/) - dimensionless temperature, (T–T )/(T _w–T ) - ( Ra cos)^1/5+(Rasin)^1/4 - v kinematic viscosity - 1/[1 +(Ra cos)^1/5/( Ra¦sin)^1/4] - density of fluid - Pr/(1+Pr) - _w wall shear stress - angle of plate inclination measured from the horizontal - stream function - dimensionless dynamic pressure     

Hypersonic flow over a narrow delta plate at large angles of attack

The problem of hypersonic flow over a flat delta plate with a high sweepback anglex at angles of attack close to /2 is solved using a numerical algorithm based on transition to the conical solution. The existence of conical flow at /2 with the velocity vector directed towards the apex of the plate is established. Values ofC _p/sin² and the thickness of the shock layer in the plane of symmetry of the plate are given as functions of the hypersonic similarity parameterk=tan tanx. A comparison of the calculated and experimental data shows that they are in good agreement.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.5, pp. 183–185, September–October, 1992.     

Mean and turbulent velocity measurements of supersonic mixing layers

The behavior of supersonic mixing layers under three conditions has been examined by schlieren photography and laser Doppler velocimetry. In the schlieren photographs, some large-scale, repetitive patterns were observed within the mixing layer; however, these structures do not appear to dominate the mixing layer character under the present flow conditions. It was found that higher levels of secondary freestream turbulence did not increase the peak turbulence intensity observed within the mixing layer, but slightly increased the growth rate. Higher levels of freestream turbulence also reduced the axial distance required for development of the mean velocity. At higher convective Mach numbers, the mixing layer growth rate was found to be smaller than that of an incompressible mixing layer at the same velocity and freestream density ratio. The increase in convective Mach number also caused a decrease in the turbulence intensity ( _u/U).List of symbols a speed of sound - b total mixing layer thickness between U ₁ – 0.1 U and U ₂ + 0.1 U - f normalized third moment of u-velocity, f u³/(U)³ - g normalized triple product of u² , g u²/(U)³ - h normalized triple product of u ², h u ²/(U)³ - l _u axial distance for similarity in the mean velocity - l _u axial distance for similarity in the turbulence intensity - M Mach number - M _c convective Mach number (for ₁ = ₂), M _c (U ₁ – U ₂)/(a ₁ + a ₂) - P static pressure - r freestream velocity ratio, r U ₂/U ₁ - Re unit Reynolds number, Re U/ - s freestream density ratio, s ₂/₁ - T _t total temperature - u instantaneous streamwise velocity - u deviation of u-velocity, uu – U - U local mean streamwise velocity - U ₁ primary freestream velocity - U ₂ secondary freestream velocity - average of freestream velocities, (U ₁ + U ₂)/2 - U freestream velocity difference, U U ₁ – U ₂ - instantaneous transverse velocity - v deviation of -velocity, – V - V local mean transverse velocity - x streamwise coordinate - y transverse coordinate - y ₀ transverse location of the mixing layer centerline - ensemble average - ratio of specific heats - boundary layer thickness (y-location at 99.5% of free-stream velocity) - similarity coordinate, (y – y ₀)/b - compressible boundary layer momentum thickness - viscosity - density - standard deviation - dimensionless velocity, (U – U ₂)/U - 1 primary stream - 2 secondary stream A version of this paper was presented at the 11th Symposium on Turbulence, October 17–19, 1988, University of Missouri-Rolla     

Heat transfer from laminar flow in ducts with elliptic cross-section

Summary The cooling of a hot fluid in laminar Newtonian flow through cooled elliptic tubes has been calculated theoretically. Numerical data have been computed for the two values 1.25 and 4 of the axial ratio of the elliptic cross-section . For =1.25 the influence of non-zero thermal resistance between outmost fluid layer and isothermal surroundings has also been investigated. Special attention has been given to the distribution of heat flux around the perimeter; when increases the flux varies more with the position at the circumference. This positional dependence becomes less pronounced, however, as the (position-independent) thermal resistance of the wall increases.Flattening of the conduit, while maintaining its cross-sectional area constant, improves the cooling. Comparison with rectangular pipes shows that this improvement is not as marked with elliptic as with rectangular pipes.Nomenclature A _k =A _{m, n} coefficients of expansion (6) - a, b half-axes of ellipse, b<a - a _p =a _{r, s} coefficients of representation (V) - D hydraulic diameter, = 4S/P; S = cross-sectional area, P = perimeter - D _e equivalent diameter, according to (13) - n coordinate (outward) normal to the tube wall - T temperature of fluid - T _i temperature of fluid at the inlet - T _s temperature of surroundings - v ₀ mean velocity of fluid - v _z longitudinal velocity of fluid - x, y carthesian coordinates coinciding with axes of ellipse - z coordinate in flow direction - , dimensionless half-axes of ellipse, =a/D and =b/D - _t heat transfer coefficient from fluid at bulk temperature to surroundings; equation (11) - _w heat transfer coefficient at the wall; equation (3) - axial ratio of ellipse, = a/b = / - , , , dimensionless coordinates; =x/D, =y/D, =z/D, =n/D - dimensionless temperature, = (T–T _s)/(T _i–T _s) - ₀ cup-mixing mean value of ; equation (10) - thermal conductivity of fluid - _m,n = _k eigenvalue - c volumetric heat capacity of fluid - _{m, n} = _k = _k eigenfunction; equations (6) and (I) - Nu total Nusselt number, = _t D/ - Nusselt number at large distance from the inlet - Nu _w wall Nusselt number, = _w D/, based on _w - Pé Péclet number, = ₀ Dc/     

Unsteady convective diffusion in a rotating parallel plate channel

The paper presents an exact analysis of the dispersion of a passive contaminant in a viscous fluid flowing in a parallel plate channel driven by a uniform pressure gradient. The channel rotates about an axis perpendicular to its walls with a uniform angular velocity resulting in a secondary flow. Using a generalized dispersion model which is valid for all time, we evaluate the longitudinal dispersion coefficientsK _i (i=1, 2, ...) as functions of time. It is shown thatK ₁=0 andK ₃,K ₄, ... decay rapidly in comparison withK ₂. ButK ₂ decreases with increasing (the dimensionless rotation parameter) for values of upto approximately =2.2. ThereafterK ₂ increases with further increase in and its value gets saturated for large values of (say, 500) and does not change any further with increase in . A physical explanation of this anomalous behaviour ofK ₂ is given.

---

Instationäre konvektive Diffusion in einem rotierenden Parallelplattenkanal

Zusammenfassung In dieser Untersuchung wird eine exakte Analyse der Ausbreitung eines passiven Kontaminierungsstoffes in einer zähen Flüssigkeit gegeben, die, befördert durch einen gleichförmigen Druckgradienten, in einem Parallelplattenkanal strömt. Der Kanal rotiert mit gleichförmiger Winkelgeschwindigkeit um eine zu seinen Wänden senkrechte Achse, wodurch sich eine Sekundärströmung ausbildet. Unter Verwendung eines generalisierten, für alle Zeiten gültigen Dispersionsmodells werden die longitudinalen DispersionskoeffizientenK _i (i=1, 2, ...) als Funktionen der Zeit ermittelt. Es wird gezeigt, daßK ₁=0 gilt und dieK ₃,K ₄, ... gegenüberK ₂ schnell abnehmen.K ₂ nimmt ab, wenn , der dimensionslose Rotationsparameter, bis etwa zum Wert 2,2 ansteigt. Danach wächstK ₂ mit bis auf einem Endwert an, der etwa ab =500 erreicht wird. Dieses anomale Verhalten vonK ₂ findet eine physikalische Erklärung.

---

List of symbols C solute concentration - D molecular diffusivity - K _i longitudinal dispersion coefficients - 2L depth of the channel - P ₀ dimensionless pressure gradient along main flow - Pe Péclet number - q velocity vector - Q _x,Q _y mass flux along the main flow and the secondary flow directions - dimensionless average velocity along the main flow direction - (x, y, z) Cartesian co-ordinates Greek symbols dimensionless rotation parameter - the inclination of side walls withx-axis - kinematic viscosity - fluid density - dimensionless time - angular velocity of the channel - dimensionless distance along the main flow direction - dimensionless distance along the vertical direction - dimensionless solute concentration - integral of the dispersion coefficientK ₂() over a time interval     

Stability of stationary traveling waves on the surface of a vertical film of viscous fluid

The stability of stationary traveling waves of the first and second families with respect to infinitesimal perturbations of arbitrary wavelength is subjected to a detailed numerical investigation. The existence of a unique region of stability of the first family is established for wave numbers (₁, ₁) corresponding to the optimal wave regime. There are several regions of stability of the second family ( _k , _k),k=2,3,..., lying close to the local flow rate maxima. In the regions of instability the growth rates of perturbations of the first family are several times greater than for the second family. This difference increases with increase in the Reynolds number. The calculations make it possible to explain a number of experimental observations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 33–41, May–June, 1989.The authors are grateful to V. Ya. Shkadov for his constant interest, and to A. G. Kulikovskii, A. A. Barmin and their seminar participants for useful discussions and suggestions.     

Attractors for the Two-Dimensional Navier–Stokes-α Model: An α-Dependence Study

The two-dimensional Navier–Stokes- model is considered on the torus and on the sphere. Upper and lower bounds for the dimension of the global attractors are given. The dependence of the dimension of the global attractors on is studied. Special attention is given for the limiting cases when 0, that is, when the Navier–Stokes- model tends to the Navier–Stokes equations, and to the case when .     

The dynamic and steady shear properties of synovial fluid and of the components making up synovial fluid

Steady-shear and dynamic properties of a pooled sample of cattle synovial fluid have been measured using techniques developed for low viscosity fluids. The rheological properties of synovial fluid were found to exhibit typical viscoelastic behaviour and can be described by the Carreau type A rheological model. Typical model parameters for the fluid are given; these may be useful for the analysis of the complex flow problems of joint lubrication.The two major constituents, hyaluronic acid and proteins, have been successfully separated from the pooled sample of synovial fluid. The rheological properties of the hyaluronic acid and the recombined hyaluronic acid-protein solutions of both equal and half the concentration of the constituents found in the original synovial fluid have been measured. These properties, when compared to those of the original synovial fluid, show an undeniable contribution of proteins to the flow behaviour of synovial fluid in joints. The effect of protein was found to be more prominent in hyaluronic acid of half the normal concentration found in synovial fluid, thus providing a possible explanation for the differences in flow behaviour observed between synovial fluid from certain diseased joints compared to normal joint fluid.Nomenclature A Ratio of angular amplitude of torsion head to oscillation input signal - G Storage modulus - G Loss modulus - I Moment of inertia of upper platen — torsion head assembly - K Restoring constant of torsion bar - N ₁ First normal-stress difference - R Platen radius - S ⁽ⁱ⁾ Geometric factor in the dynamic property analysis - t ₁ Characteristic time parameter of the Carreau model - X, Y Carreau model parameters - Z () Reimann Zeta function of - Carreau model parameter - Shear rate - Apparent steady-shear viscosity - ^* Complex dynamic viscosity - Dynamic viscosity - Imaginary part of the complex dynamic viscosity - ₀ Zero-shear viscosity - ₀ Cone angle - Carreau model characteristic time - Density of fluid - Shear stress - Phase difference between torsion head and oscillation input signals - ₀ Zero-shear rate first normal-stress coefficient - Oscillatory frequency     

New concepts in relative permeabilities at high capillary numbers for surfactant flooding

Flooding oil reservoirs with surfactant solutions can increase the amount of oil that can be recovered. Macroscopic modelling of the process requires relative permeabilities to be functions of saturation and capillary number. With only limited experimental data, relative permeabilities have usually been assumed to be linear functions of saturation at high capillary numbers. The experimental data is reviewed, some of which suggest that this assumption is not necessarily correct. The basis for the assumption is therefore reviewed and it is concluded that the linear model corresponds to microscopically segregated flow in the porous medium. Based on new but equally plausible complementary assumptions about the flow pattern, a mixed flow model is derived. These models are then shown to be limiting cases of a droplet model which represents the mixing scale within the porous medium and gives a physical basis for interpolating between the models. The models are based on physical concepts of flow in a porous medium and so the approach described here represents a significant improvement in the understanding of high capillary number flow. This is shown by the fact that fewer parameters are needed to describe experimental data.Notation A total cross-sectional area assigned to capillary bundle - A ⁽ⁱ⁾ physical cross-sectional area of tube i - c ⁽ⁱ⁾ ordered configurational label for droplets in tube i - c configuration label for tube i (order not considered) - D defined by Equation (26) - E(...) expectation value with respect to the trinomial distribution - S _r ⁽⁾ fractional flow of phase - k absolute permeability - k _r relative permeability of phase - k _r ⁰ endpoint relative permeability of phase - L capillary tube length in bundle model - m ⁽ⁱ⁾ number of droplets of phase a occupying tube i - n exponent for phase a in Equation (2) - N number of droplets in bundle model - N _c capillary number - p pressure - p(c') probability of configuration c - Q ⁽ⁱ⁾ total volume flow rate in tube i - S saturation of phase - S flowing saturation of phase - S _r residual saturation of phase - S _r ⁽⁾ saturations when fractional flow of phase is 1 in the case of varying residual saturations for three-phase flow ( ) - t _c residence time for droplet configuration c - v ⁽ⁱ⁾ total fluid velocity in bundle tube i - , phase label - p pressure differential across capillary bundle - ⁽ⁱ⁾ tube conductivity defined by Equation (7) - viscosity of phase - interfacial tension - gradient operator - ... average over tube droplet configurations     

Similar solutions and the asymptotics of filtration equations

In this paper we consider the asymptotic behavior of solutions of the quasilinear equation of filtration as t. We prove that similar solutions of the equation u _t = (u )_xx asymptotically represent solutions of the Cauchy problem for the full equation u _t = [(u)]_xx if (u) is close to u for small u.     

Parameter determination for thermodynamical models of the pseudoelastic behaviour of shape memory alloy by resistivity measurements and infrared thermography

Two thermodynamical models of pseudoelastic behaviour of shape memory alloys have been formulated. The first corresponds to the ideal reversible case. The second takes into account the hysteresis loop characteristic of this shape memory alloys.Two totally independent techniques are used during a loading-unloading tensile test to determine the whole set of model parameters, namely resistivity and infrared thermography measurements. In the ideal case, there is no difficulty in identifying parameters.Infrared thermography measurements are well adapted for observing the phase transformation thermal effects.Notations 1 austenite 2 martensite - ₍₎ Macroscopic infinitesimal strain tensor of phase - ₍₂₎ ^f Traceless strain tensor associated with the formation of martensite phase - Macroscopic infiniesimal strain tensor - Macroscopic infinitesimal strain tensor deviator - _f Trace - Equivalent strain - ^pe Macroscopic pseudoelastic strain tensor - x Distortion due to parent (austenite =1)product (martensite =2) phase transformation (traceless symmetric second order tensor) - M Total mass of a system - M() Total mass of phase - V Total volume of a system - V() Total volume of phase - z=M(2)/M Weight fraction of martensite - 1-z=M(1)/M Weight fraction of austenite - u ₀ ^* () Specific internal energy of phase (=1,2) - s ₀ ^* () Specific internal entropy of phase - Specific configurational energy - Specific configurational entropy - ₀ ^f (T) Driving force for temperature-induced martensitic transformation at stress free state ( ₀ ^f T) = T ^*–Ts ^*) - Kirchhoff stress tensor - Kirchhoff stress tensor deviator - Equivalent stress - Cauchy stress tensor - Mass density - K Bulk moduli (K ₀=K) - L Elastic moduli tensor (order 4) - E Young modulus - Energetic shear (₀ = ) - Poisson coefficient - M _s ^o (M _F ^o ) Martensite start (finish) temperature at stress free state - A _s ^o (A _F ^o ) Austenite start (finish) temperature at stress free state - C _v Specific heat at constant volume - k Conductivity - Pseudoelastic strain obtained in tensile test after complete phase transformation (AM) (unidimensional test) - ₀ Thermal expansion tensor - r Resistivity - 1MPa 10⁶ N/m ² - ⁽⁾ Specific free energy of phase - _n Specific free energy at non equilibrium (R model) - _n ^eq Specific free energy at equilibrium (R model) - _n ^v Volumic part of ^eq - Specific free energy at non equilibrium (R _L model) - _conf Specific coherency energy (R _L model) - _c Specific free energy at constrained equilibria (R _L model) - _it (T) Coherency term (R _L model)     

Rheologie pathologischer Gelenkflüssigkeiten

Zusammenfassung Die eingehende Analyse des viskoelastischen Verhaltens von 193 Kniegelenkspunktaten verschiedenster entzündlicher und nichtentzündlicher Gelenkerkrankungen ließ keine wesentlichen diagnostischen Hilfen für klinische Problemfälle erkennen. Untersucht wurden im einzelnen Fließkurven einschließlich der Anfangsviskosität ₀ und durch eine Normierungsmethode ermittelte master-curves, sowie Normalspannungen und in 3 Fällen gleichzeitig auch der SpeichermodulG und der VerlustmodulG mit Hilfe von dynamischen Messungen.Durch Vergleich der pathologischen Gelenkpunktate mit normaler, post mortal gewonnener gepoolter Synovia ließ sich ein Eindruck vom Grad der gestörten Viskoelastizität gewinnen. Dabei lassen die erniedrigten Hyaluronsäure-Konzentrationen, die Veränderungen der konzentrationsunabhängigen Knickzeitt _k> und die master-curve erkennen, daß hierfür sowohl eine verringerte Konzentration als auch ein geringeres Molekulargewicht der Hyaluronsäure verantwortlich ist. Konzentrierungsversuche pathologischer Synovia ergaben den Hinweis auf die Entstehung von Mikrogelen und ließen in Fällen zuvor fehlender Normalspannungen auch nach der Eindickung keine Normalspannungen erkennen. Es wird deshalb auch die Möglichkeit gestörter intermolekularer Interaktionen in der pathologischen Synovia diskutiert.

---

Summary A thorough analysis of the viscoelastic behaviour of 193 synovial fluid samples of knee joints concerning different joint diseases (inflammatory and non-inflammatory) gives no essential diagnostic help in case of clinical problems.Investigations were done particularly on flow curves including the Newtonian viscosity ₀ and normal forces, and with the help of a standardization-method we got master curves. In three cases we also got dynamic properties i.e. the elastic modulusG and the loss modulusG. By comparison of the pathological synovial fluid samples with normal, post-mortem pooled synovial fluid one gets an idea of the degree of disturbance on viscoelasticity. It was found that the reduced concentration and the lower molecular weight of the hyaluronic acid are responsible for the pathological variation of the concentration independent bending timet _k as well as the shape of the master curves.Tests on concentrated pathological synovial fluids indicate the beginning formation of micro-gels. In cases of absence of normal forces even after concentration no normal forces could be detected. Therefore the possibility of disturbed intermolecular interactions in pathological synovial fluids will be discussed, too.

---

D Schergeschwindigkeit - D _K D-Koordinate des Tangentenschnittpunktes - t _k Knickzeit - s Steigung des geradlinigen Anteils der Fließkurve - scheinbare Viskosität - _m mittlere Viskosität beiD = 10² s^–1 - ₀ Anfangsviskosität, Nullviskosität - Endviskosität - _{N 11} – ₂₂ 1. Normalspannungsdifferenz - G ₀ Ruheschermodul - G ^* komplexer (dynamischer) Schermodul - G Speichermodul - G Verlustmodul - Winkelgeschwindigkeit - Winkel der Phasendifferenz - Kegelwinkel - d Durchmesser von Kegel und Platte des Meßsystems - f Frequenz der vorgegebenen Oszillation - f _n Eigenfrequenz des Torsionskopfes - _IA Amplitude der Eingangsschwingung - _TA Amplitude der Ausgangsschwingung - _I axiale Bewegung der Schneckenwelle - _T Bewegung des Torsionskopfverminderers - [] Grenzviskositätszahl (Staudinger-Index) - v Verhängungszahl - r Korrelationskoeffizient - m Mittelwert - s Standardabweichung - p Signifikanzniveau - n.s. nicht signifikant p > 0,05 Auszugsweise vorgetragen auf der Jahrestagung der Deutschen Rheologischen Gesellschaft in Berlin vom 8.–10. Mai 1978.Mit 9 Abbildungen und 8 Tabellen     

The contribution of internal degrees of freedom to the non-Newtonian rheology of model polymer fluids

We report non-equilibrium molecular dynamics simulations of rigid and non-rigid dumbbell fluids to determine the contribution of internal degrees of freedom to strain-rate-dependent shear viscosity. The model adopted for non-rigid molecules is a modification of the finitely extensible nonlinear elastic (FENE) dumbbell commonly used in kinetic theories of polymer solutions. We consider model polymer melts — that is, fluids composed of rigid dumbbells and of FENE dumbbells. We report the steady-state stress tensor and the transient stress response to an applied Couerte strain field for several strain rates. We find that the rheological properties of the rigid and FENE dumbbells are qualitatively and quantitatively similar. (The only exception to this is the zero strain rate shear viscosity.) Except at high strain rates, the average conformation of the FENE dumbbells in a Couette strain field is found to be very similar to that of FENE dumbbells in the absence of strain. The theological properties of the two dumbbell fluids are compared to those of a corresponding fluid of spheres which is shown to be the most non-Newtonian of the three fluids considered.Symbol Definition b dimensionless time constant relating vibration to other forms of motion - F force on center of mass of dumbbell - F _i force on bead i of dumbbell - F force between center of masses of dumbbells and - F _ij force between beads i and j - h vector connecting bead to center of mass of dumbbell - H dimensionless spring constant for dumbbells, in units of / ² - I moment of inertia of dumbbell - J general current induced by applied field - k _B Boltzmann's constant - L angular momentum - m mass of bead, (= m/2) - M mass of dumbbell, g - N number of dumbbells in simulation cell - P translational momentum of center of mass of dumbbell - P pressure tensor - P _xy xy component of pressure tensor - Q separation of beads in dumbbell - Q _eq equilibrium extension of FENE dumbbell and fixed extension of rigid dumbbell - Q ₀ maximum extension of dumbbell - r _ij vector connecting beads i and j - r position vector of center of mass dumbbell - R vector connecting centers of mass of two dumbbells - t time - t ^* dimensionless time, in units of m/ - T ^* dimensionless temperature, in units of /k - u potential energy - u velocity vector of flow field - u _x x component of velocity vector - V volume of simulation cell - X general applied field - strain rate, s^–1 - ^* dimensionless shear rate, in units of /m ² - general transport property - Lennard-Jones potential well depth - friction factor for Gaussian thermostat - shear viscosity, g/cms - ^* dimensionless shear viscosity, in units of m/ ² - ^* dimensionless number density, in units of ^–3 - Lennard-Jones separation of minimum energy - relaxation time of a fluid - angular velocity of dumbbell - orientation angle of dumbbell      

Regularity of invariant manifolds

Under mild conditions it is proved that an invariant submanifold ofX 0<1 for the equationdx/dt+Ax=f(x), A sectorial,fC'(X ,X),0<1, is a submanifold ofX ¹ as well. In addition, conditions are given for the semiflow of the equation to extend fromX toX and a new inertial manifold theorem is proved for the scalar reaction diffusion equation.     

A note on three-dimensional boundary layer growth

Summary This note is an extension of the work of Görtler²) on two-dimensional boundary layer growth to the three-dimensional case. The solutions of three-dimensional boundary layer equations are obtained by considering the potential flow of the body to be governed by the functions At U ₀(, ) and At U ₀(, ) where is any positive number.     

Some remarks on differential equations of quadratic type

In this paper we study differential equations of the formx(t) + x(t)=f(x(t)), x(0)=x ₀ C HereC is a closed, bounded convex subset of a Banach spaceX,f(C) C, and it is often assumed thatf(x) is a quadratic map. We study the differential equation by using the general theory of nonexpansive maps and nonexpansive, non-linear semigroups, and we obtain sharp results in a number of cases of interest. We give a formula for the Lipschitz constant off: C C, and we derive a precise explicit formula for the Lipschitz constant whenf is quadratic,C is the unit simplex inR ⁿ, and thel ₁ norm is used. We give a new proof of a theorem about nonexpansive semigroups; and we show that if the Lipschitz constant off: CC is less than or equal to one, then lim_tf(x(t))–x(t)=0 and, if {x(t):t 0} is precompact, then lim_tx(t) exists. Iff¦C=L¦C, whereL is a bounded linear operator, we apply the nonlinear theory to prove that (under mild further conditions on C) lim_t f(x(t))–x(t)=0 and that lim_t x(t) exists if {x(t):t 0} is precompact. However, forn 3 we give examples of quadratic mapsf of the unit simplex ofR ⁿ into itself such that lim_t x(t) fails to exist for mostx ₀ C andx(t) may be periodic. Our theorems answer several questions recently raised by J. Herod in connection with so-called model Boltzmann equations.