BUCKING AND FREE VIBRATION OF PIEZOELECTRIC/PIEZOMAGNETIC LAMINATED NANO-BEAM 1)

针对压电/压磁层合纳米梁屈曲、自由振动问题，基于非局部理论与正弦剪切型变形梁理论，建立了力学模型；利用哈密顿原理推导出层合梁运动方程与边界条件；通过数值解法求得层合梁临界屈曲载荷与自由振动频率。对数值结果分析可知：磁电弹夹层对压电/压磁层合纳米梁屈曲和自由振动的影响不能忽略；磁电弹夹层中压电或压磁材料的体积分数和夹层厚度为主要影响因素；分析得到的影响规律可为此类材料在工程中的应用提供理论参考。     

压电/压磁层合纳米梁屈曲及自由振动的研究

针对压电/压磁层合纳米梁屈曲、自由振动问题,基于非局部理论与正弦剪切型变形梁理论,建立了力学模型;利用哈密顿原理推导出层合梁运动方程与边界条件;通过数值解法求得层合梁临界屈曲载荷与自由振动频率。对数值结果分析可知:磁电弹夹层对压电/压磁层合纳米梁屈曲和自由振动的影响不能忽略;磁电弹夹层中压电或压磁材料的体积分数和夹层厚度为主要影响因素;分析得到的影响规律可为此类材料在工程中的应用提供理论参考。     

主动控制压电旋转悬臂梁的参数振动稳定性分析

在工程实际中旋转机械由于制造和加工误差,装配的不均匀性等原因,往往会脉动运行,这将使得机械系统发生参数振动.当脉动参数满足一定关系时,这种参数振动将会失稳,进而影响机械结构的正常运转.本文针对这一问题,引入压电材料对脉动旋转悬臂梁系统的振动进行控制,研究主动控制悬臂梁系统的参数振动优化设计问题,采用Hamilton变分原理与一阶Galerkin离散相结合的方法,建立了受速度反馈传感器主动控制的压电旋转悬臂梁的一阶近似线性控制方程.运用多尺度方法,得到了压电旋转悬臂梁系统在发生1/2亚谐波参数共振时稳定性边界的控制方程,并利用直接分析方法验证了解析摄动解的正确性.将摄动解中临界阻尼比和轮毂角速度脉动幅值的无量纲参数作为评价系统稳定性能的指标.通过数值算例,分析了轮毂半径、轮毂角速度平均值和脉动幅值、梁长以及速度传感器的反馈增益系数对系统稳定性区域的影响.研究结果表明,梁长、轮毂半径、脉动幅值会降低系统稳定性,反馈增益系数可以提高系统稳定性,而轮毂角速度平均值与系统稳定性之间有非单调的关系.为进一步设计压电旋转机械结构提供了理论依据.     

主动控制压电旋转悬臂梁的参数振动稳定性分析

在工程实际中旋转机械由于制造和加工误差,装配的不均匀性等原因,往往会脉动运行,这将使得机械系统发生参数振动. 当脉动参数满足一定关系时,这种参数振动将会失稳,进而影响机械结构的正常运转. 本文针对这一问题,引入压电材料对 脉动旋转悬臂梁系统的振动进行控制,研究主动控制悬臂梁系统的参数振动优化设计问题,采用 Hamilton 变分原理与一阶 Galerkin 离散相结合的方法,建立了受速度反馈传感器主动控制的压电旋转悬臂梁的一阶近似线性控制方程. 运用多尺度方法,得到了压电旋转悬臂梁系统在发生1/2亚谐波参数共振时稳定性边界的控制方程,并利用直接分析方法验证了解析摄动解的正确性. 将摄动解中临界阻尼比和轮毂角速度脉动幅值的无量纲参数作为评价系统稳定性能的指标. 通过数值算例,分析了轮毂半径、轮毂角速度平均值和脉动幅值、梁长以及速度传感器的反馈增益系数对系统稳定性区域的影响. 研究结果表明,梁长、轮毂半径、脉动幅值会降低系统稳定性,反馈增益系数可以提高系统稳定性,而轮毂角速度平均值与系统稳定性之间有非单调的关系. 为进一步设计压电旋转机械结构提供了理论依据.      

纳米尺度压电球壳的径向自由振动分析

基于非局域弹性理论研究了纳米尺度压电球壳的径向自由振动,为了得到控制方程的解析解忽略了非局域效应对电位移的影响.假设球壳沿径向极化,推导了用径向位移表达的非局域微分控制方程.考虑到尺度效应,应用边界条件得到了球壳径向自由振动的频率方程.利用频率方程本文讨论了自然频率与非局域参数以及半径比之间的关系.根据计算结果,径向振动频率受到非局域效应的显著影响.     

纳米圆轴在弹性介质中的扭转振动分析

基于非局部应变梯度理论,考虑周围弹性介质的影响,研究纳米圆轴的扭转自由振动。首先通过Hamilton原理推导纳米圆轴扭转振动的控制方程及边界条件,接着采用微分求积法得到控制方程及三类边界条件的离散形式,最后由数值计算结果分析扭转振动特性。讨论了两个小尺度参数和弹性介质刚度的变化对振动频率的影响,并通过小尺度参数比对振动频率的影响分析两个尺度参数的耦合作用。研究结果表明,扭转自由振动频率随非局部参数增加而减小,随应变梯度尺度参数、弹性介质刚度增加而增大;当非局部参数大于应变梯度尺度参数时,小尺度效应体现为非局部效应,相反则体现为应变梯度效应。     

含压电层的功能梯度柱壳的自由振动分析

基于三维弹性理论，导出了带有压电层的圆柱形梯度壳的动力学方程以及相应的边界条件，用幂级数展开法得到了求解该圆柱形梯度壳自由振动的三维精确公式．通过实例模型求解了该壳体的自由振动的固有频率；分析了不同电学边界条件对壳体的振动频率的影响。结果可评估各种近似理论解和数值解的正确性。     

基于能量准则的梁振动多模态主动控制的LQR法

选用以结构振动能量和控制信号能量作为控制目标函数的LQR算法,在单对压电元件进行梁振动主动控制的基础上,使用多对压电元件进行主动控制．运用该算法对压电层合梁的振动控制进行了分析计算．数值算例表明该方法能够有效地控制多阶模态并减小控制能量的消耗．由此,进一步验证了以结构振动能量和控制信号能量作为控制目标函数的LQR算法的正确性。     

INVESTIGATIONS ON THE MECHANICAL CHARACTERISTICS OF NANOBEAMS BASED ON THE NONLOCAL STRAIN GRADIENT THEORY1)

基于非局部应变梯度理论,建立了一种具有尺度效应的高阶剪切变形纳米梁的力学模型. 其中,考虑了应变场和一阶应变梯度场下的非局部效应. 采用哈密顿原理推导了纳米梁的控制方程和边界条件,并给出了简支边界条件下静弯曲、自由振动和线性屈曲问题的纳维级数解. 数值结果表明,非局部效应对梁的刚度产生软化作用,应变梯度效应对纳米梁的刚度产生硬化作用,梁的刚度整体呈现软化还是硬化效应依赖于非局部参数与材料特征尺度的比值. 梁的厚度与材料特征尺度越接近,非局部应变梯度理论与经典弹性理论所预测结果之间的差异越显著.     

旋转运动中弹性梁耦合振动的辛方法

研究旋转梁结构的弹性耦合振动问题。通过引入对偶体系，建立了解决该类问题的辛方法。在辛体系中描述旋转梁纵向和横向耦合振动控制方程，即哈密顿正则方程。进一步求解得到结构的固有振动频率及相应的振动模态，发现固有振动频率随转动角速度先升后降以及模态之间的某种转化规律。     

Bending and vibration analyses of a rotating sandwich cylindrical shell considering nanocomposite core and piezoelectric layers subjected to thermal and magnetic fields

The bending and free vibration of a rotating sandwich cylindrical shell are analyzed with the consideration of the nanocomposite core and piezoelectric layers subjected to thermal and magnetic fields by use of the first-order shear deformation theory (FSDT) of shells. The governing equations of motion and the corresponding boundary conditions are established through the variational method and the Maxwell equation. The closed-form solutions of the rotating sandwich cylindrical shell are obtained. The effects of geometrical parameters, volume fractions of carbon nanotubes, applied voltages on the inner and outer piezoelectric layers, and magnetic and thermal fields on the natural frequency, critical angular velocity, and deflection of the sandwich cylindrical shell are investigated. The critical angular velocity of the nanocomposite sandwich cylindrical shell is obtained. The results show that the mechanical properties, e.g., Young’s modulus and thermal expansion coefficient, for the carbon nanotube and matrix are functions of temperature, and the magnitude of the critical angular velocity can be adjusted by changing the applied voltage.     

Propagation characteristics of thermoelastic waves in piezoelectric (6 mm class) rotating plate

The propagation of Lamb waves in a homogeneous, transversely isotropic (6 mm class), piezothermoelastic plate rotating with uniform angular velocity about normal to its boundary has been investigated. The generalized (non-classical) theories of thermoelasticity in contrast to Sharma and Pal [Sharma, J.N., Pal, M., 2004. Lamb wave propagation in transversely isotropic piezothermoelastic plate. J. Sound Vib. 270, 587–610] have been used to investigate the problem. The surfaces of the plate are subjected to stress free, thermally insulated/isothermal and electrically shorted boundary conditions. Secular equations for wave propagation modes in the plate are derived from a coupled system of governing partial differential equations of linear piezothermoelasticity. After obtaining the complex characteristic roots with the help of Descartes' algorithm, the transcendental secular equations have been solved by functional iteration numerical technique to compute phase velocity and attenuation coefficient. Finally, in order to illustrate the analytical development, numerical solution of secular equations is carried out for PZT-5A piezo-thermoelastic material. The corresponding simulated results of various physical quantities such as phase velocity, attenuation coefficients, specific loss factor of energy dissipation, thermo-mechanical coupling factor and relative frequency shifts have been presented graphically for both rotating and non-rotating plates for comparison purpose. There is a scope for extension of the present work to other classes of piezo/pyroelectric crystals. The study will be useful in design and construction of gyroscope, rotation sensors, temperature sensors and other pyro/piezoelectric surface acoustic wave (SAW) devices.     

Nonlinear free vibration of piezoelectric cylindrical nanoshells

The nonlinear vibration characteristics of the piezoelectric circular cylindrical nanoshells resting on an elastic foundation are analyzed. The small scale effect and thermo-electro-mechanical loading are taken into account. Based on the nonlocal elasticity theory and Donnell's nonlinear shell theory, the nonlinear governing equations and the corresponding boundary conditions are derived by employing Hamilton's principle. Then,the Galerkin method is used to transform the governing equations into a set of ordinary differential equations, and subsequently, the multiple-scale method is used to obtain an approximate analytical solution. Finally, an extensive parametric study is conducted to examine the effects of the nonlocal parameter, the external electric potential, the temperature rise, and the Winkler-Pasternak foundation parameters on the nonlinear vibration characteristics of circular cylindrical piezoelectric nanoshells.     

Free flapewise vibration analysis of rotating double-tapered Timoshenko beams

Free vibration analysis of a rotating double-tapered Timoshenko beam undergoing flapwise transverse vibration is presented. Using an assumed mode method, the governing equations of motion are derived from the kinetic and potential energy expressions which are derived from a set of hybrid deformation variables. These equations of motion are then transformed into dimensionless forms using a set of dimensionless parameters, such as the hub radius ratio, the dimensionless angular speed ratio, the slenderness ratio, and the height and width taper ratios, etc. The natural frequencies and mode shapes are then determined from these dimensionless equations of motion. The effects of the dimensionless parameters on the natural frequencies and modal characteristics of a rotating double-tapered Timoshenko beam are numerically studied through numerical examples. The tuned angular speed of the rotating double-tapered Timoshenko beam is then investigated.     

Vibration and damping analysis of a composite plate with active and passive damping layer

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｃｏｎｖｅｎｔｉｏｎａｌｐａｓｓｉｖｅｃｏｎｓｔｒａｉｎｅｄｌａｙｅｒｄａｍｐｉｎｇ（ＰＣＬＤ）ｔｒｅａｔｍｅｎｔｓｈａｖｅｂｅｅｎｅｘｔｅｎｓｉｖｅｌｙｕｔｉｌｉｚｅｄａｓａｓｉｍｐｌｅａｎｄｒｅｌｉａｂｌｅｍｅａｎｓｆｏｒｄａｍｐｉｎｇｏｕｔｔｈｅｖｉｂｒａｔｉｏｎｏｆｖａｒｉｏｕｓｓｔｒｕｃｔｕｒｅｓ（ＭｅａｄａｎｄＭａｒｋｕｓ１９６９［１］,Ｙ．Ｋ．Ｃｈｅｕｎｇ１９７２［２］,ＪｏｈｎｓｏｎａｎｄＫｉｅｎｈｏｌｚ１９８２［３］,ＣｕｐｉａｌａｎｄＮｉｚｉｏｌ…     

弹性连接旋转柔性梁动力学分析

采用Chebyshev 谱方法对考虑根部连接弹性的平面内旋转柔性梁动力学特性进行研究. 基于Gauss-Lobatto 节点与Chebyshev 多项式方法对柔性梁变形场进行离散,通过投影矩阵法施加固定及弹性连接边界条件. 利用Chebyshev 谱方法获得了系统固有频率和模态振型数值解,通过与有限元方法及加权残余法的比较,验证了方法的有效性. 分析了弹性连接刚度、角速度比率、系统径长比及梁的长细比等参数对系统固有频率及模态振型的影响. 研究发现:由于系统弯曲模态、拉伸模态的频率随各参数的变化规律不一致,将出现频率转向与振型转换现象;随着弹性连接刚度、角速度比率及系统径长比的增大,低阶弯曲模态频率增大并超过高阶拉伸模态频率,随着梁的长细比的增大,低阶拉伸模态频率增大并超过高阶弯曲模态频率.      

Analytical test functions for free vibration analysis of rotating non-homogeneous Timoshenko beams

In this paper, the governing equations for free vibration of a non-homogeneous rotating Timoshenko beam, having uniform cross-section, is studied using an inverse problem approach, for both cantilever and pinned-free boundary conditions. The bending displacement and the rotation due to bending are assumed to be simple polynomials which satisfy all four boundary conditions. It is found that for certain polynomial variations of the material mass density, elastic modulus and shear modulus, along the length of the beam, the assumed polynomials serve as simple closed form solutions to the coupled second order governing differential equations with variable coefficients. It is found that there are an infinite number of analytical polynomial functions possible for material mass density, shear modulus and elastic modulus distributions, which share the same frequency and mode shape for a particular mode. The derived results are intended to serve as benchmark solutions for testing approximate or numerical methods used for the vibration analysis of rotating non-homogeneous Timoshenko beams.