Determination of elongational viscosity of polymer melts by RME and Rheotens experiments

Several linear (LLDPE, HDPE, PS) and long-chain-branched (LDPE, PP) polymer melts were investigated by an elongational rheometer (RME Rheometrics) and by Rheotens (Göttfert). The Molecular Stress Function (MSF) theory is briefly reviewed and used to extrapolate the steady-state elongational viscosity. To evaluate Rheotens experiments, a new process model is introduced which assumes that the elongational viscosity in the Rheotens test is a function of the draw ratio only. The apparent elongational viscosities extracted from Rheotens curves are found to lie in between the steady-state elongational viscosity and three times the shear viscosity.     

哑铃式聚合物分子模型流变性质的Brown动力学模拟

采用非平衡态Ｂｒｏｗｎ动力学方法（ＮＥＢＤ）模拟ＦＥＮＥ哑铃分子模型在定常拉伸流动和突然开始拉伸流动中的运动，计算流变性质，考虑位形相关Ｓｔｏｋｅｓ阻力系数等模型参数的影响，并从非线性随机动力学角度，分析相图，给出拉伸粘度曲线和哑铃伸展曲线不会出现Ｓ型的解释     

On the “viscosity overshoot” during the uniaxial extension of a low density polyethylene

An experimental investigation of the viscosity overshoot phenomenon observed during uniaxial extension of a low density polyethylene is presented. For this purpose, traditional integral viscosity measurements on a Münstedt-type extensional rheometer are combined with local measurements based on the in-situ visualization of the sample under extension. For elongational experiments at constant strain rates within a wide range of Weissenberg numbers (Wi), three distinct deformation regimes are identified. Corresponding to low values of Wi (regime I), the tensile stress displays a broad maximum, but such maximum is observed with various polymeric materials deformed at low rates and it should not be confused with the “viscosity overshoot” phenomenon. Corresponding to intermediate values of Wi (regime II), a local maximum of the integral extensional viscosity is systematically observed. Moreover, within this regime, a strong discrepancy between integral measurements and the space average of the local elongational viscosity is observed which indicates large deviations from an ideal uniaxial deformation process. Images of samples within this regime reinforce this finding by showing that, corresponding to the maximum of the integral viscosity, secondary necks develop along the sample. The emergence of a maximum of the integral elongational viscosity is, thus, related to the distinct inhomogeneity of deformation states and most probably not to the rheological properties of the material. In the fast stretching limit (high Wi, regime III), the overall geometric uniformity of the sample is well preserved, no secondary necks are observed and both the integral and the space averaged transient elongational viscosity show no maximum. A detailed but yet incomplete comparison of the experimental findings with results from the literature is presented and several open questions are stated.     

A “constrained-chain” network model for viscoelastic fluids

A specific case of the general “constrained-chain” strain-dependent integral viscoelastic model is evaluated with steady simple shear data, stress growth and relaxation data, and steady elongational viscosity data. The model is qualitatively correct and quantitatively reasonable in its predictions and, on balance, compares favourably with strain-dependent, strain-rate-dependent, and stress-dependent models from the current literature. Specific model comparisons are made to demonstrate the effect of the “constrained-chain” or finite extensibility feature of the model.     

The effect of pre-thermal history on shear and uniaxial elongational viscosity of a tetrafluoroethylene/hexafluoropropylene copolymer near the crystal melting transition

The melt rheology of a commercially available tetrafluoroethylene/hexafluoropropylene copolymer, which is known as Teflon FEP copolymer, was studied to examine the effect of pre-thermal history during sample preparation conditions on dynamic shear and uniaxial elongational measurements. The first experimental series includes the sample preparation under hot press at 320 °C followed by a rapid cooling. The master curves were successfully obtained at 300 °C from the time-temperature superposition principle. The loss modulus G″ was found to be proportional to the angular frequency in a double-logarithmic plot toward 0.01 (rad/s), while the slope of the storage modulus G′ did not become 2. The elongational viscosity as a function of time under constant strain rates showed weak strain-hardening, which was enhanced with larger strain rates. The second experimental series contain three kinds of samples with different pre-thermal history to control rheological properties. All samples were hot-pressed at 320 °C followed by a rapid cooling to room temperature for the sample A and a slow cooling for the sample B and C. The dynamic shear and elongational measurements were performed at 270 °C for all samples, which were heated from room temperature for the sample A and B, but heated up to 280 °C and cooled down to 270 °C for the sample C. The distance between G″ and G′ become narrower in the order of the sample C, B, and A. In the same order, unexpectedly, the strain-hardening in the elongational viscosity measurements became the strain-softening. These unusual properties were discussed from a residual crystallinity.     

Influence of molecular structure on the extensional behaviour of polyethylene melts

The elongational behaviour of polyethylene samples having different molecular structure has been tested. Elongational viscosity measurements have been carried out using the isothermal melt spinning technique. The extensional behaviour of the different samples is analysed as a function of total strain. The effect of long-chain branching on elongational viscosities is described. A comparison is presented between elongational viscosity and melt strength data.Some of the results reported here were presented at the VIIIth International Congress on Rheology, Naples, September 1–5, 1980, cf. [16].     

Rheo-optical measurements of the elongational flow of aqueous polymer solutions

An opposed jets rheometer was used to investigate the elongational viscosity as a function of the strain rate for dilute aqueous solutions of polyvinylformamide and polyacrylamide. Critical strain rates at which the enhancement in elongational viscosity occurs were determined for both systems. The influence of the polymer concentration on the elongational viscosity was investigated. The measurements were performed with polymer concentrations less than the critical polymer concentration c_p^* c_p^* . In order to assess the deformation and orientation of the macromolecules, flow-induced birefringence was measured simultaneously.     

Elongational properties and molecular structure of polyethylene melts

Summary The viscosity and the recoverable strain in the steady state of elongation have been measured on several polyethylenes of different molecular structures. The elongational viscosity as a function of tensile stress runs through a more or less pronounced maximum in the nonlinear range whereas in the linear range the Trouton viscosity is reached. For low density polyethylenes it could be demonstrated that the maximum of the steady-state elongational viscosity and the elasticity expressed by the steady-state compliances in shear and tension sensitively increase if the molecular weight distribution is broadened by the addition of high molecular weight components. A variation of the weight average molecular weight does only shift the elongational viscosity curve but leaves its shape unchanged. Two of the four high density polyethylenes investigated do not show a maximum of the steady-state elongational viscosity, for the others it is less pronounced than in the case of low density polyethylenes. The influence of branching on the elongational behaviour of polyethylene melts in the steady-state and the transient region is qualitatively discussed.With 11 figures and 4 tables     

Branched viscoelastic surfactant solutions and their response to elongational flow

Several years ago, Münstedt and Laun reported on the influence of branching on the elongational flow properties of polymer chains (Münstedt and Laun, 1981). They concluded that, in addition to the molecular weight distribution, the degree of branching strongly affects the degree of strain thickening of the elongational viscosity in such a way that the maximum in this material function increases with branching. In a recent paper by Lin, a ternary system of dodecyldimethylamine oxide-sodium laureth sulphate-sodium chloride surfactant solutions was investigated by CryoTEM and rheology (Lin, 1996). He reported a linear relation between the added sodium chloride and the branching of the wormlike micelles. In this paper we present an investigation of these surfactant solutions in elongational flow. Our results indicate that for branched micellar systems the presence of branching enhances the maximum of the elongational viscosity in the same manner as in the case of polymer melts.     

Determination of the elongational viscosity of polymer melts by melt spinning experiments. A comparison with different experimental techniques

In this work, melt spinning experiments were tentatively used for the determination of the elongational viscosity of polymer melts at different levels of tensile strain and strain rate. The materials examined were two high-density polyethylene grades for blow moulding with similar number-average molecular mass but different polydispersity index. The data from melt spinning tests were compared with transient extensional viscosity data obtained by uniform isothermal tensile tests, performed by means of an extensional rheometer, as well as with those produced by converging flow tests (Cogswell model). The results showed that for high strain and strain rate levels, the melt spinning experiments provide elongational viscosity data quite close to the transient extensional viscosity values obtained from the tensile tests.     

Rheological properties of long glass fiber filled polypropylene

Long glass fiber-filled polypropylene (PP) composites are produced by pultrusion, and the extrudate is cut at different lengths producing composites containing long fibers of controlled length. The rheological properties of such composites in the molten state have been studied using different rheometers. A capillary rheometer has been constructed and mounted on a molding-injection machine. The shear viscosity of filled PP determined from the capillary rheometer, after corrections for entrance effects, was found to be very close to that of unfilled PP. However, large excess pressure losses at the capillary entrance were observed and these data have been used to obtain an apparent elongational viscosity. The apparent elongational viscosity was shown to be considerably larger than the shear viscosity for PP and filled PP, and it increased markedly with fiber length and fiber content. Rotational rheometers with a parallel-plate geometry were used to investigate the viscoelastic properties of these composites and their behavior was found to be non-linear, exhibiting a yield stress. A model is proposed to describe the shear viscosity from a solid-like behavior at low stresses to fluid-like behavior at high shear stresses taking into account fiber content and orientation. A modified model, proposed for elongational flow, describes relatively well the apparent elongational data.     

Rheological behaviour of nano-composites based on polyamide 6 under shear and elongational flow at high strain rates

In this work, the rheological behaviour of high molecular mass polyamide 6 (PA6)/organo-montmorillonite nano-composites, obtained via melt blending, was investigated under shear and extensional flow. Capillary rheometry was used for the measurement of high shear rate steady state shear viscosity and die entrance pressure losses; further, by the application of a converging flow method (Cogswell model) to these experimental results, elongational viscosity data were indirectly calculated. The extensional behaviour was directly investigated by means of melt spinning experiments, and data of apparent elongational viscosity were determined. The results evidenced that the presence of the organo-clay in filled PA6 melts modifies the rheological behaviour of the material, with respect to the unfilled polymer, in dependence on the type of flow experienced by the fluid. In shear flow, the nano-composites showed a slightly lower viscosity than neat PA6, whereas in elongation, they appeared much more viscous, in dependence on the organo-clay content.     

Time-dependent non-linear dynamics of polymer solutions in microfluidic contraction flow—a numerical study on the role of elongational viscosity

A generalised form of the finitely extensible non-linear elastic (FENE) model for modelling non-linear flow of semi-dilute polymer solutions is proposed. It accounts for conformation-dependent polymer elasticity and predicts shear-thinning shear viscosity, non-linear elongational viscosity and first and second normal stress differences. The rheometric material functions predicted by the model are critically compared with the results of the linear Phan–Thien–Tanner model. The predictabilities of these constitutive models under benchmark flow problems are evaluated by time-dependent simulations, using finite volume method based on a CFD simulation toolbox. The effects of the model parameters, the inertia and the contraction ratio are numerically studied. The modified FENE model qualitatively captures the non-linear flow phenomena of polymer solution in the high elasticity number ( $\mathrm {El}$ ) flow regime observed in experiments. The results show that an accurate growth function of the elongational viscosity is the key to the prediction of the time-dependent highly asymmetric flow patterns.     

Elongational viscosity by fiber spinning

Isothermal melt, fiber-spinning was recently analyzed by means of a nonlinear, integral, constitutive equation that incorporates shear history effects, spectrum of relaxation times, shear-thinning, and extension thinning or thickening when either the drawing force or the draw ratio is specified. The predictions agreed with experimental data on spinning of polystyrene, low-density polyethylene, and polypropylene melts. The predicted apparent elongational viscosity along the threadline (which, as shown in this work, must be identical to that measured experimentally by fiber spinning type of elongational rheometers) is compared with the true elongational viscosity predicted by the same constitutive equation under well-defined experimental conditions of constant extension rate, independent of any strain history. It is concluded that the apparent elongational viscosity, as measured by fiber-spinning, approaches the true elongational viscosity at low Weissenberg numbers (defined as the product of the liquid's relaxation time multiplied by the extension rate). At moderate Weissenberg numbers, the two viscosities may differ by an order of magnitude and their difference grows even larger at high Weissenberg numbers.     

液晶高分子-各向异性流体挤出拉伸分岔研究

应用共转导数型本构方程研究了液晶高分子纺丝挤出过程的拉伸黏度,应用计算机符号运算软件 Maple得出解析表达式,拉伸黏度与拉伸率之间关系(随剪切速率变化)表明存在分岔现象,得出拉伸黏度显著高于相应的剪切黏度,解释了液晶高分子熔体挤出时不发生挤出胀大的物理机制．     

Isothermal elongational behavior of liquid-crystalline polymers and LCPs based blends

The rheological behavior of two flexible thermoplastics, Nylon-6 (Ny) and bisphenol-A polysulfone (PSu), and two wholly aromatic liquid crystalline polymers, Vectra-A900 (VA) and Vectra-B950 (VB), as well as that of Ny/VB and PSu/VA blends with 10% LCP, has been investigated by the use of capillary viscometers equipped with cylindrical dies having different length-to-diameter ratios. The elongational viscosity of all materials was calculated, from the results of isothermal measurements carried out at 290°C, by means of the Cogswell's analysis, based on the estimation of the pressure drop due to the converging flow at the die inlet. The behavior in elongational flow was compared with the rheological behavior in shear flow conditions. It was found that the elongational viscosities of VA and VB are very large and account for a fairly marked pressure drop at the die entrance, due to the orientation of the LCP domains taking place in the converging flow zone. For these materials, the ratio of the elongational viscosity to the Newtonian shear viscosity is up to two orders of magnitude higher than the value expected on the basis of the Trouton rule. For the flexible resins, the Trouton ratio is 3 and ca. 3–10, are common values for high molar mass linear polymers. The addition of 10% LCP into the flexible resins strongly increases their elongational viscosity and makes the blends resemble neat LCPs in their extensional flow behavior. In shear flow, on the contrary, the addition of LCP was shown to induce a marked reduction of the melt viscosity, even when, as for the Ny/VB blend, the LCP is more viscous than the matrix.     

Uniaxial elongational flow effects and morphology development in LDPE/phosphate glass hybrids

Shear and elongational viscosity measurements were performed on low-density polyethylene/phosphate glass (LDPE/Pglass) hybrid materials in the liquid state. Under shear deformation, the hybrids with low concentrations of Pglass showed a Newtonian region at low frequencies, followed by shear-thinning behavior at high frequencies. High Pglass concentrations displayed shear-thinning behavior over the whole range of frequencies studied. Deviations from the log-additivity rule for viscosity were found to be compositionally dependent and generally indicated an immiscible mixture. The elongational viscosity of the hybrids increased at very low Pglass concentrations (1–2 vol.% Pglass) and then was drastically reduced at higher concentrations (i.e., >10 vol.% Pglass). In addition, elongational flow was found to induce the formation of Pglass fibrils in hybrids containing at least 10 vol.% Pglass. This was correlated to the elongational capillary number; the critical elongational capillary number was estimated to be 0.22. The elongational deformation was also found to greatly increase the overall crystallinity of the system due to molecular orientation of the LDPE polymer chains as confirmed by wide angle X-ray diffraction. A critical composition of 5 vol.% Pglass was found to be the point at which LDPE hybrid rheological properties, molecular orientation, and morphology changed drastically.