Chaos synchronization on the N-torus and cryptography

A class of chaotic dynamical systems on the N-dimensional torus is proposed for masking some information in secure communications. The information is then recovered thanks to a chaos synchronization process. To cite this article: L. Rosier et al., C. R. Mecanique 332 (2004).

Résumé

Nous proposons une classe de systèmes chaotiques sur le tore N-dimensionnel pour masquer une information à transmettre dans une communication sécurisée. Cette information est ensuite reconstruite à l'aide d'un mécanisme de synchronisation du chaos. Pour citer cet article : L. Rosier et al., C. R. Mecanique 332 (2004).     

On the slow gravity-driven migration of arbitrary clusters of small solid particles

A new approach is advocated to compute at a low cpu time cost the rigid-body motions of settling solid particles when inertial effects are negligible. In addition to the relevant boundary-integral equations, the numerical implementation and a few convincing benchmark tests we address two configurations of equivalent spheres and spheroids, i.e. that exhibit when isolated the same settling velocity. To cite this article: A. Sellier, C. R. Mecanique 332 (2004).

Résumé

On propose une approche originale pour déterminer le mouvement d'une assemblée de particules solides et de formes arbitraires soumise à l'action de la pesanteur dans l'approximation de Stokes. Outre les intégrales de frontière et la méthode numérique associées on présente quelques comparaisons et examine le cas de deux configurations de sphères et ellipsoides de révolution équivalents, c'est-à-dire dotés lorsqu'ils sont seuls de la même vitesse de sédimentation. Pour citer cet article : A. Sellier, C. R. Mecanique 332 (2004).     

Experimental observation of frequency doubling in a viscoelastic mixing layer

An experimental mixing layer in water at Reynolds number 440 is investigated. A colored viscoelastic solution is introduced in the shear layer before the roll-up dynamics. On the basis of flow visualization and local velocity measurements, it is found that compared to the Newtonian case, the roll-up process is affected by the non-Newtonian behavior of the viscoelastic solution. The effect consists of the appearance of secondary eddies in the mixing layer corresponding to the production of higher harmonics in the vorticity distribution. Consequently, there is a frequency doubling of the local velocity oscillations in the mixing layer. To cite this article: F. Sausset et al., C. R. Mecanique 332 (2004).

Résumé

Une étude expérimentale de la couche de mélange à un nombre de Reynolds de 440 est réalisée. Une solution viscoélastique colorée est introduite dans la couche cisaillée stationnaire juste avant la formation des tourbillons. En utilisant un mesure locale de la vitesse et une technique de visualisation par fluorescence, il est montré que la formation tourbillonnaire est affectée par le comportement non-Newtonien de la solution viscoélastique par rapport au cas Newtonien. Cet effet correspond à la formation de tourbillons secondaires produisant un harmonique supérieur dans la répartition spatiale de vorticité. En conséquence, un doublement de la fréquence des oscillations de la vitesse locale dans la couche de mélange est observé. Pour citer cet article : F. Sausset et al., C. R. Mecanique 332 (2004).     

Variance of the virtual displacement

We show that the affine structure of the 3-dimensional space is deeply enmeshed with the static laws expression. The relevance of tensorial rules for calculus in mechanics is thus enhanced. The virtual work principle is stated precisely but a little twist is given to the usual statements: the tensorial nature of the so-called virtual displacement vector is asserted to be covariant. To cite this article: C. Vallée et al., C. R. Mecanique 332 (2004).

Résumé

Nous montrons que la structure affine de l'espace tridimensionnel est fortement imbriquée avec l'expression des lois de la statique. La pertinence de l'application des règles du calcul tensoriel à la mécanique est ainsi renforcée. Le principe des travaux virtuels est établi précisément avec une seule entorse aux exposés classiques : la nature tensorielle de l'habituel vecteur déplacement virtuel est affirmée covariante. Pour citer cet article : C. Vallée et al., C. R. Mecanique 332 (2004).     

Random-field model for the elasticity tensor of anisotropic random media

This Note deals with the construction of a non-Gaussian positive definite matrix-valued random field whose mathematical properties allow the fourth-order elasticity tensor of random non homogeneous anisotropic three dimensional elastic media to be modelled. If the usual parametric probabilistic approach was used, then 21 mutually dependent random fields should be modelled and identified by using experimental data. Such an approach would be very difficult because the systems of the marginal probability distributions of these random fields have to be identified due to the fact that, for a boundary value problem, the displacement field of the random medium is a non-linear mapping of the random elasticity tensor. The theory presented in this paper allows such a probabilistic model of the fourth-order elasticity tensor field to be constructed and depends only of four scalar parameters: three spatial correlation lengths and one parameter allowing the level of the random fluctuations to be controlled. To cite this article: C. Soize, C. R. Mecanique 332 (2004).

Résumé

On présente la construction d'un champ aléatoire à valeurs dans les matrices définies positives dont les propriétés mathématiques permettent de modéliser le tenseur d'élasticité du quatrième ordre des mileux élastiques anisotropes tridimensionnels aléatoires. Si l'approche probabiliste paramétrique usuelle était utilisée, alors il serait nécessaire de modéliser et d'identifier à l'aide de données expérimentales 21 champs aléatoires mutuellement dépendants. Une telle approche serait très difficile de part le fait que le système de lois marginales de ces champs aléatoires doit être identifié parce que, pour un problème aux limites, le champ de déplacement est une transformation non linéaire du tenseur d'élasticité. La théorie présentée dans ce papier permet de construire une modélisation probabiliste du champ de tenseur d'élasticité qui ne dépend que de quatre paramètres scalaires : trois échelles de corrélation spatiale et un paramètre permettant de contrôler le niveau des fluctuations aléatoires. Pour citer cet article : C. Soize, C. R. Mecanique 332 (2004).     

A simple multiaxial fatigue criterion for metals

A new simple multiaxial high-cycle fatigue endurance criterion, suitable for situations where the convex hull associated with the stress path approximates well an ellipsoid, is proposed. It considers, as measures of fatigue solicitation: (i) a new definition for the equivalent shear stress amplitude; and (ii) the maximum principal stress along the stress history. Assessment of the resulting criterion for a wide range of in-phase and out-phase cyclic loads shows that it compares very well with experimental data published in the literature. To cite this article: C.A. Gonçalves et al., C. R. Mecanique 332 (2004).

Résumé

On propose un critère simple d'endurance à la fatigue polycyclique, applicable à des situations pour lesquelles l'envelope convexe associé à l'histoire des contraintes s'approche bien d'une ellipse. Le critère considère, comme mesures de solicitation à la fatigue : (i) une nouvelle définition de l'amplitude de contrainte de cisaillement ; et (ii) la contrainte principale maximale au cours de l'histoire de chargement. Pour citer cet article : C.A. Gonçalves et al., C. R. Mecanique 332 (2004).     

The influence of crack-imbalance orientation and orbital evolution for an extended cracked Jeffcott rotor

Vibration peaks occurring at rational fractions of the fundamental rotating critical speed, here named Local Resonances, facilitate cracked shaft detection during machine shut-down. A modified Jeffcott-rotor on journal bearings accounting for gravity effects and oscillating around nontrivial equilibrium points is employed. Modal parameter selection allows this linear model to represent first mode characteristics of real machines. Orbit evolution and vibration patterns are analyzed, yielding useful results. Crack detection results indicate that, instead of 1x and 2x components, analysis of the remaining local resonances should have priority; this is due to crack-residual imbalance interaction and to 2x multiple induced origins. Therefore, local resonances and orbital evolution around 1/2, 1/3 and 1/4 of the critical speed are emphasized for various crack-imbalance orientations. To cite this article: J. Gómez-Mancilla et al., C. R. Mecanique 332 (2004).

Résumé

Les pics de vibration apparaissant au passage des fractions de la vitesse de critique de rotation des systèmes tournants, appelées résonances locales, facilitent la détection de fissures sur les machines. Dans cette étude, un modèle de rotor Jeffcott modifié avec une fissure tournante, comportant des coussinets et prenant en compte les effets de pesanteur et de balourd est présenté. Le choix modal des paramètres permet de représenter les caractéristiques liées au premier mode des machines tournantes usuelles. Les évolutions des vibrations et des orbites du système comportant une fissure sont analysées et permettent d'obtenir des résultats utiles pour la détection des fissures sur les machines tournantes. Ainsi, ces résultats indiquent que, en plus des composants 1x et 2x, l'analyse des autres résonances locales restantes doivent être regardées avec attention du fait de l'interaction possible entre les différentes orientations de la fissure et du balourd, et des origines multiples pouvant engendrer la présence des résonances 2x. Par conséquent les résonances et l'évolution des orbites obtenus autour de 1/2, 1/3 et 1/4 de la vitesse critique sont étudiées pour différentes variations d'angle entre le balourd et l'orientation de la fissure. Pour citer cet article : J. Gómez-Mancilla et al., C. R. Mecanique 332 (2004).     

Direct simulation of the motion of neutrally buoyant balls in a three-dimensional Poiseuille flow

In a previous article the authors introduced a Lagrange multiplier based fictitious domain method. Their goal in the present article is to apply a generalization of the above method to: (i) the numerical simulation of the motion of neutrally buoyant particles in a three-dimensional Poiseuille flow; (ii) study – via direct numerical simulations – the migration of neutrally buoyant balls in the tube Poiseuille flow of an incompressible Newtonian viscous fluid. Simulations made with one and several particles show that, as expected, the Segré–Silberberg effect takes place. To cite this article: T.-W. Pan, R. Glowinski, C. R. Mecanique 333 (2005).     

Oscillatory fracture paths in thin elastic sheets

We report a novel mode of quasi-static oscillatory crack propagation when a cutting tip of moderately large width is driven through a thin brittle polymer film. Experiments show that the amplitude and wavelength of the oscillatory crack paths scale linearly with the width of the cutting tip over a wide range of length scales but are independent of the width of the sheet and of the cutting speed. We propose a mechanism for this instability, based on the coupling between crack propagation and out-of-plane deformations of the film. To cite this article: B. Roman et al., C. R. Mecanique 331 (2003).     

Effective flow of a viscous liquid through a helical pipe

We study the flow of a viscous fluid through a pipe with helical shape parameterized with , where the small parameter stands for the distance between two coils of the helix. The pipe has small cross-section of size . Using the asymptotic analysis of the microscopic flow described by the Navier–Stokes system, with respect to the small parameter that tends to zero, we find the effective fluid flow described by an explicit formula of the Poisseuile type including a small distorsion due to the particular geometry of the pipe. To cite this article: E. Marušić-Paloka, I. Pažanin, C. R. Mecanique 332 (2004).

Résumé

On considère un écoulement dans un tube de section circulaire et de forme hélicoïdale paramétré par , où est la distance entre deux tours de la spirale. Le rayon de la section du tube est lui aussi supposé égal à . A partir de l'écoulement microscopique décrit par le système de Navier–Stokes et en utilisant l'analyse asymptotique par rapport à ce petit paramètre on obtient l'écoulemment effectif décrit par une formule explicite de type Poiseuille associée à une petite déviation due à la géometrie du tube. Pour citer cet article : E. Marušić-Paloka, I. Pažanin, C. R. Mecanique 332 (2004).     

A two grid algorithm based on perturbation and homotopy methods

In this paper, we propose a new class of bi-grid algorithm to solve large scale linear algebraic equations. This method is based on homotopy, perturbation technique and Padé approximants. To cite this article: R. El Mokhtari et al., C. R. Mecanique 330 (2002) 825–830.     

Homogenization of an elasticity problem in domains with a net of slender bars near surface

We consider an elasticity problem in a domain Ω⁽⁾=ΩF⁽⁾, where Ω is an open bounded domain in R³, F⁽⁾ is a connected nonperiodic set in Ω like a net of slender bars, and is a parameter characterizing the microstructure of the domain. We consider the case of a surface distribution of the set F⁽⁾, i.e., for sufficiently small , the set F⁽⁾ is concentrated in arbitrary small neighbourhood of a surface Γ. Under a hypothesis on the asymptotic behaviour of the energy functional, we obtain the macroscopic (homogenized) model. To cite this article: M. Goncharenko, L. Pankratov, C. R. Mecanique 331 (2003).     

Transfert du trichloréthylène en milieu poreux à partir d'un panache de vapeursMass transfer of trichloroethylene in a porous medium from a vapor plume

A large scale experiment has been carried out on an experimental facility to study the mass transfer of trichloroethylene (TCE) in a partially saturated porous medium. 5 liters of TCE have been infiltrated in the vadose zone of the site. The mass transfer of TCE from the vapor plume in the unsaturated zone towards the top of groundwater was quantified based on an analytical and a numerical approach. The mass of the pollutant measured at the exit of the model is well represented by the two mathematical approaches. It is found that the transfer of TCE towards the groundwater from the vapor plume is weak, which corresponds to 285 g of TCE, approximately 4% of the initial mass. To cite this article: H. Benremita, G. Schäfer, C. R. Mecanique 331 (2003).     

Analytical development of disturbed matrix eigenvalue problem applied to mixed convection stability analysis in Darcy media

This work consists in evaluating algebraically and numerically the influence of a disturbance on the spectral values of a diagonalizable matrix. Thus, two approaches will be possible; to use the theorem of disturbances of a matrix depending on a parameter, due to Lidskii and primarily based on the structure of Jordan of the no disturbed matrix. The second approach consists in factorizing the matrix system, and then carrying out a numerical calculation of the roots of the disturbances matrix characteristic polynomial. This problem can be a standard model in the equations of the continuous media mechanics. During this work, we chose to use the second approach and in order to illustrate the application, we choose the Rayleigh–Bénard problem in Darcy media, disturbed by a filtering through flow. The matrix form of the problem is calculated starting from a linear stability analysis by a finite elements method. We show that it is possible to break up the general phenomenon into other elementary ones described respectively by a disturbed matrix and a disturbance. A good agreement between the two methods was seen. To cite this article: H.B. Hamed, R. Bennacer, C. R. Mecanique 336 (2008).     

Numerical analysis of a quasistatic piezoelectric problem with damage

The quasistatic evolution of the mechanical state of a piezoelectric body with damage is numerically studied in this paper. Both damage and piezoelectric effects are included into the model. The variational formulation leads to a coupled system composed of two linear variational equations for the displacement field and the electric potential, and a nonlinear parabolic variational equation for the damage field. The existence of a unique weak solution is stated. Then, a fully discrete scheme is introduced by using a finite element method to approximate the spatial variable and an Euler scheme to discretize the time derivatives. Error estimates are derived on the approximate solutions, from which the linear convergence of the algorithm is deduced under suitable regularity conditions. Finally, a two-dimensional example is presented to demonstrate the behaviour of the solution. To cite this article: J.R. Fernández et al., C. R. Mecanique 336 (2008).     

Direct numerical simulation and global stability analysis of three-dimensional instabilities in a lid-driven cavity

The first bifurcation in a lid-driven cavity characterized by three-dimensional Taylor–Görtler-Like instabilities is investigated for a cubical cavity with spanwise periodic boundary conditions at Re=1000. The modes predicted by a global linear stability analysis are compared to the results of a direct numerical simulation. The amplification rate, and the shape of the three-dimensional perturbation fields from the direct numerical simulation are in very good agreement with the characteristics of the steady S1 mode from the stability analysis, showing that this mode dominates the other unstable unsteady modes. To cite this article: J. Chicheportiche et al., C. R. Mecanique 336 (2008).     

A model for frictional slip in woven fabrics

A continuum model for frictional slip of the yarns of a plain-weave fabric is presented. The model is based on the assumption that the weave is composed of two families of continuously distributed yarns constrained at all times to occupy a common evolving surface in three-dimensional space. The two families may slide relative to one another on the surface, subject to their respective equations of motion, fiber constitutive equations, and frictional slip rules. The theory is intended for the quantitative analysis of deformation, slip and energy dissipation during a ballistic impact event. To cite this article: B. Nadler, D.J. Steigmann, C. R. Mecanique 331 (2003).     

Sur les approximations « isotrope » et « anisotrope » de l''opérateur tangent pour les méthodes tangentes incrémentale et affineOn the ‘isotropic’ and ‘anisotropic’ approximations of the tangent operator in the incremental tangent and affine methods

Three localisation rules, TFA, the incremental tangent, and the affine method, are recalled and evaluated in the context of the elastoplastic micromechanical analysis of heterogeneous materials, composites or polycrystals. With the help of a severe example, it is shown how methods based on the complete anisotropic elastoplastic tangent operator yield very stiff predictions which are far from the reference solution; the same conclusion holds for the method using the elastic accommodation rule. On the other hand, using an isotropic form of the tangent operator delivers much better responses. The reasons for such differences are discussed, together with possible justifications for the choice of the isotropic form. To cite this article: J.-L. Chaboche, P. Kanouté, C. R. Mecanique 331 (2003).     

Computing Green's function of elasticity in a half-plane with impedance boundary condition

This Note presents an effective and accurate method for numerical calculation of the Green's function G associated with the time harmonic elasticity system in a half-plane, where an impedance boundary condition is considered. The need to compute this function arises when studying wave propagation in underground mining and seismological engineering. To theoretically obtain this Green's function, we have drawn our inspiration from the paper by Durán et al. (2005), where the Green's function for the Helmholtz equation has been computed. The method consists in applying a partial Fourier transform, which allows an explicit calculation of the so-called spectral Green's function. In order to compute its inverse Fourier transform, we separate as a sum of two terms. The first is associated with the whole plane, whereas the second takes into account the half-plane and the boundary conditions. The first term corresponds to the Green's function of the well known time-harmonic elasticity system in (cf. J. Dompierre, Thesis). The second term is separated as a sum of three terms, where two of them contain singularities in the spectral variable (pseudo-poles and poles) and the other is regular and decreasing at infinity. The inverse Fourier transform of the singular terms are analytically computed, whereas the regular one is numerically obtained via an FFT algorithm. We present a numerical result. Moreover, we show that, under some conditions, a fourth additional slowness appears and which could produce a new surface wave. To cite this article: M. Durán et al., C. R. Mecanique 334 (2006).     

Impact of a bead on a rotating wall

We study experimentally the impact of a plastic bead on a rotating wall made of steel (velocity Ω; radial position x₀). The results show that the restitution coefficient is directly function of the impact velocity x₀Ω and is invariant by changing frame reference. The influence of the height of release of the particle on its angular velocity after impact is also studied. We observe an increase of the angular velocity with height followed by a saturation. We propose an interpretation for this evolution considering that the particle may roll without sliding during all the impact. This physical feature is not always taken into account in existing models of impact between rigid bodies. To cite this article: F. Rioual et al., C. R. Mecanique 336 (2008).