左心室壁局部范围MRI三维有限元应变解析

利用磁共振标记技术对左心室壁进行局部三维有限元应变的分析．在…个心动周期内，分别拍摄24张短轴平面图像和长轴平面图像，然后进行合成，求解出健康人左心室壁上各个位置不同时刻的位移和应变，为临床应用和定量准确地评价心功能提供重要的理论依据．     

A generalized processing technique in digital particle image velocimetry with direct estimation of velocity gradients

A technique is proposed for the processing of digital particle image velocimetry (PIV) images, in one single step providing direct estimates of fluid velocity, out-of-plane vorticity and in-plane shear rate tensor. The method is based on a generalization of the standard PIV cross-correlation technique and substitutes the usual discrete cross-correlation of image pairs with a correlation of interpolated two-dimensional image intensity functions, being subject to affine transformations. The correlation is implemented by using collocation points, on which image intensity values are interpolated. The resulting six-dimensional correlation function is maximized using a general purpose optimization algorithm. The use of the method is demonstrated by application to different types of synthetically generated image pairs constructed with known particle displacement functions. The resulting errors are assessed and compared with those of a representative standard PIV method as well as with those of the present technique using no differential quantities in the search of the peak location. The examples demonstrate that significant improvements in accuracy can be obtained for flow fields with regions containing strong velocity gradients.     

Three-Dimensional Analytical Solution for an Axisymmetric Biharmonic Problem

In this paper, we propose a method for the solution of the axisymmetric boundary value problem for a finite elastic cylinder with assigned stress and/or displacements acting on the ends and side. The technique utilizes the Love representation, which allows for reduction of the solution of the elastic problem to the search for a biharmonic function on a cylindrical domain. In the solution method suggested here, we write the Love function with a Bessel expansion and analyze in detail the conditions under which it is possible to differentiate the expansion term by term. We show that this is possible only for a restricted class of elastic solutions. In the general case, we introduce two new auxiliary functions of the z-coordinate. In this way, we obtain the general form of the axisymmetric biharmonic function, which is discussed in relation to certain specific boundary conditions applied on the side and ends of the cylinder. We obtain an exact explicit solution of practical interest for a cylinder with free ends and assigned displacements applied to the side.     

Application of DIC Technique to Concrete—Study on Objectivity of Measured Surface Displacements

The measurements of the width of a localized zone on the surface of notched concrete beams under quasi-static three-point bending were performed using the 2D Digital Image Correlation technique. Different image length resolutions, image search patches and distances between search patch centres were tested. Attention was paid to the accuracy and objectivity of surface displacements measured. An original method was proposed to determine the width of localized zones above the notch based on experiments.     

Numerical simulation of debonding of adhesively bonded joint

This paper describes a numerical method to simulate the debonding of adhesively bonded joints. Assuming that the adhesive thickness and the adhesive Young’s modulus are small with respect to the characteristic length of the joint and to the Young’s modulus of the adherents, a simplified model is derived in the case of large displacements using the asymptotic expansion technique. Then, the problem of the crack growth is stated, in the case of a stable growth, as the search of the local minima of the total energy of the joint, sum of the mechanical energy and the Griffith’s fracture energy. This is made using the Newton’s method. To this end, the expressions of the first and second derivatives of the mechanical energy with respect to a crack front displacement are derived analytically. Finally, numerical examples are presented, highlighting the unstable character of the crack growth at initiation.     

A Robust Finite Element-based Filter for Digital Image and Volume Correlation Displacement Data

Background

Digital Image and Volume Correlation (DIC and DVC) are non-contact measurement techniques that are used during mechanical testing for quantitative mapping of full-field displacements. The relatively high noise floor of DIC and DVC, which is exasperated when differentiated to obtain strain fields, often requires some form of filtering. Techniques such as median filters or least-squares fitting perform poorly over high displacement gradients, such as the strain localisation near a crack tip, discontinuities across crack flanks or large pores. As such, filtering does not always effectively remove outliers in the displacement field.

Objective

This work proposes a robust finite element-based filter that detects and replaces outliers in the displacement data using a finite element method-based approximation.

Methods

A method is formulated for surface (2D and Stereo DIC) and volumetric (DVC) measurements. Its validity is demonstrated using analytical and experimental displacement data around cracks, obtained from surface and full volume measurements.

Results

It is shown that the displacement data can be filtered in such a way that outliers are identified and replaced. Moreover, data can be smoothed whilst maintaining the nature of the underlying displacement field such as steep displacement gradients or discontinuities.

Conclusions

The method can be used as a post-processing tool for DIC and DVC data and will support the use of the finite element method as an experimental–numerical technique.

     

3D Flow reconstruction using ultrasound PIV

Ultrasound particle image velocimetry (PIV) can be used to obtain velocity fields in non-transparent geometries and/or fluids. In the current study, we use this technique to document the flow in a curved tube, using ultrasound contrast bubbles as flow tracer particles. The performance of the technique is first tested in a straight tube, with both steady laminar and pulsatile flows. Both experiments confirm that the technique is capable of reliable measurements. A number of adaptations are introduced that improve the accuracy and applicability of ultrasound PIV. Firstly, due to the method of ultrasound image acquisition, a correction is required for the estimation of velocities from tracer displacements. This correction accounts for the fact that columns in the image are recorded at slightly different instances. The second improvement uses a slice-by-slice scanning approach to obtain three-dimensional velocity data. This approach is here demonstrated in a strongly curved tube. The resulting flow profiles and wall shear stress distribution shows a distinct asymmetry. To meaningfully interpret these three-dimensional results, knowledge of the measurement thickness is required. Our third contribution is a method to determine this quantity, using the correlation peak heights. The latter method can also provide the third (out-of-plane) component if the measurement thickness is known, so that all three velocity components are available using a single probe.     

离散颗粒集合体-Cosserat连续体模型的连接尺度方法

基于针对分子动力学-Cauchy连续体模型提出的连接尺度方法(BSM)[1,2],发展了耦合细尺度上基于离散颗粒集合体模型的离散单元法(DEM)和粗尺度上基于Cosserat连续体模型的有限元法(FEM)的BSM。仅在有限局部区域内采用DEM以从细观层次模拟非连续破坏现象,而在全域则采用花费计算时间和存储空间较少的FEM。通过连接尺度位移(包括平移和转动)分解,和基于作用于Cosserat连续体有限元节点和颗粒集合体颗粒形心的离散系统虚功原理,得到了具有解耦特征的粗细尺度耦合系统运动方程。讨论和提出了在准静态载荷条件下粗细尺度域的界面条件,以及动态载荷条件下可以有效消除粗细尺度域界面上虚假反射波的非反射界面条件(NRBC)。本文二维数值算例结果说明了所提出的颗粒材料BSM的可应用性和优越性,及所实施界面条件对模拟颗粒材料动力学响应的有效性。     

Two holographic blind-hole methods for measuring residual stresses

The relationship between the displacements and stresses relieved from blind-hole drilling is introduced via an easily understandable concept in this paper. Combining this concept with holographic interferometry, two holographic blind-hole methods for measuring residual stresses are established. The first is a new technique which requires measuring three out-of plane displacements; and the second is a modification of another technique which requires measuring two out-of plane displacements. Each of the two methods needs only one interference fringe pattern and is demonstrated by using it to measure a known residual stress in an aluminum specimen.     

A technique for reducing the fringe frequency in large-displacement holography

The analytical method of superposition is combined with the experimental technique of multiple-exposure holography to decrease the sensitivity of holographic measurement by at least an order of magnitude. Moiré fringes of a lower frequency are produced which simultaneously extend the range of measurement to larger displacements. The method is demonstrated for the case of a clamped circular plate subjected to a concentrated load centrally applied.