Stagnation flow towards a shrinking sheet

The stagnation flow towards a shrinking sheet is studied. A similarity transform reduces the Navier-Stokes equations to a set of non-linear ordinary differential equations which are then integrated numerically. Both two-dimensional and axisymmetric stagnation flows are considered. It is found that solutions do not exist for larger shrinking rates and may be non-unique in the two-dimensional case. The non-alignment of the stagnation flow and the shrinking sheet complicates the flow structure. Convective heat transfer decreases with the shrinking rate due to an increase in boundary layer thickness.     

MHD rotating flow of a viscous fluid over a shrinking surface

This study is concerned with the magnetohydrodynamic (MHD) rotating boundary layer flow of a viscous fluid caused by the shrinking surface. Homotopy analysis method (HAM) is employed for the analytic solution. The similarity transformations have been used for reducing the partial differential equations into a system of two coupled ordinary differential equations. The series solution of the obtained system is developed and convergence of the results are explicitly given. The effects of the parameters M, s and λ on the velocity fields are presented graphically and discussed. It is worth mentioning here that for the shrinking surface the stable and convergent solutions are possible only for MHD flows.     

传热传质对有抽吸的收缩薄片上的非线性磁流体动力学边界层流动的影响

This work is concerned with Magnetohydrodynamic viscous flow due to a shrinking sheet in the presence of suction. The cases of two dimensional and axisymmetric shrinking are discussed. The governing boundary layer equations are written into a dimensionless form by similarity transformations. The transformed coupled nonlinear ordinary differential equations are numerically solved by using an advanced numeric technique. Favorability comparisons with previously published work are presented. Numerical results for the dimensionless velocity, temperature and concentration profiles as well as for the skin friction, heat and mass transfer and deposition rate are obtained and displayed graphically for pertinent parameters to show interesting aspects of the solution.     

纳米流体在伸/缩楔体上的MHD流动数值研究

对纳米流体在伸/缩楔体上的磁流体(MHD)流动进行了数值研究。首先,通过相似变换将控制偏微分方程转化为非线性常微分方程组;然后,利用Matlab软件,借助打靶法,结合四阶五常龙格库塔迭代方案进行数值求解;最后,详细讨论了各控制参数对无量纲速度、温度、浓度、表面摩擦系数、局部Nusselt数和局部Sherwood数的影响。结果表明,楔体在拉伸情况下只有唯一解,理论上不会出现边界层分离;而在一定收缩强度范围内存在双解,边界层流动在壁面处可能会出现边界层分离,壁面抽吸会使边界层分离推迟;楔体在拉伸情况下,磁场参数对表面摩擦系数的影响较大,对局部Nusselt数和局部Sherwood数的影响较小。     

Numerical simulation of MHD stagnation point flow and heat transfer of a micropolar fluid towards a heated shrinking sheet

A comprehensive study of magneto hydrodynamics two‐dimensional stagnation flow with heat transfer characteristics towards a heated shrinking sheet immersed in an electrically conducting incompressible micropolar fluid in the presence of a transverse magnetic field is analyzed numerically. The governing continuity, momentum, angular momentum and heat equations together with the associated boundary conditions are first reduced to a set of self similar nonlinear ordinary differential equations using a similarity transformation and are then solved by a method based on finite difference discretization. Some important features of the flow and heat transfer in terms of normal and streamwise velocities, microrotation and temperature distributions for different values of the governing parameters are analyzed, discussed and presented through tables and graphs. The results indicate that the reverse flow caused due to shrinking of the sheet can be stopped by applying a strong magnetic field. The magnetic field enhances the shear stresses and decreases the thermal boundary layer thickness. The heat loss per unit area from the sheet decreases with an increase in the shrinking parameter. Micropolar fluids exhibit reduction in shear stresses and heat transfer rate as compared with Newtonian fluids, which may be beneficial in the flow and thermal control of polymeric processing. Copyright © 2011 John Wiley & Sons, Ltd.     

Effects of thermal radiation on MHD viscous fluid flow and heat transfer over nonlinear shrinking porous sheet

This paper investigates the effects of thermal radiation on the magnetohy-drodynamic (MHD) flow and heat transfer over a nonlinear shrinking porous sheet. The surface velocity of the shrinking sheet and the transverse magnetic field are assumed to vary as a power function of the distance from the origin. The temperature dependent viscosity and the thermal conductivity are also assumed to vary as an inverse function and a linear function of the temperature, respectively. A generalized similarity transformarion is used to reduce the governing partial differential equations to their nonlinear coupled ordinary differential equations, and is solved numerically by using a finite difference scheme. The numerical results concern with the velocity and temperature profiles as well as the local skin-friction coefficient and the rate of the heat transfer at the porous sheet for different values of several physical parameters of interest.     

Magnetohydrodynamic and heat transfer effects on the stagnation-point flow of an electrically conducting nanofluid past a porous vertical shrinking/stretching sheet in the presence of variable stream conditions

A steady two-dimensional magnetohydrodynamic stagnation-point flow of an electrically conducting fluid and heat transfer with thermal radiation of a nanofluid past a shrinking and stretching sheet is investigated numerically. The model used for the nanofluid incorporates the effects of the Brownian motion and thermophoresis. A similarity transformation is used to convert the governing nonlinear boundary-layer equations into coupled higher-order nonlinear ordinary differential equations. The result shows that the velocity, temperature, and concentration profiles are significantly influenced by the Brownian motion, heat radiation, and thermophoresis particle deposition.     

Oblique stagnation-point flow and heat transfer towards a shrinking sheet with thermal radiation

An analysis is made of steady two-dimensional oblique stagnation-point flow and radiative heat transfer of an incompressible viscous fluid towards a shrinking sheet which is shrunk in its own plane with a velocity proportional to the distance from a fixed point. Here the axis of the stagnation flow and that of the shrinking sheet are not aligned. A similarity transformation reduces the Navier-Stokes equations to a set of non-linear ordinary differential equations and are solved numerically using a shooting technique. The analysis of the results obtained shows that multiple solutions exist for a certain range of the ratio of the shrinking velocity to the free stream velocity. The effect of non-alignment for the wall shear stress and the horizontal velocity components are discussed. Streamline patterns are also shown for shrinking at the sheet with aligned and non-aligned cases. It is found that the temperature at a point in the fluid decreases with increase in effective Prandtl number (Pr _eff ). The results pertaining to the present study indicate that as Pr _eff increases, the rate of heat transfer also increases. The reported results are in good agreement with the available published work in the literature.     

Impact of anisotropic slip on the stagnation-point flow past a stretching/shrinking surface of the Al_2O_3-Cu/H_2O hybrid nanofluid

The characteristics of heat transfer in the three-dimensional stagnationpoint flow past a stretching/shrinking surface of the Al_2O_3-Cu/H_2O hybrid nanofluid with anisotropic slip are investigated. The partial differential equations are converted into a system of ordinary differential equations by valid similarity transformations. The simplified mathematical model is solved computationally by the bvp4c approach in the MATLAB operating system. This solving method is capable of generating more than one solutions when suitable initial guesses are proposed. The results are proven to have dual solutions, which consequently lead to the application of a stability analysis that verifies the achievability of the first solution. The findings reveal infinite values of the dual solutions at several measured parameters causing the non-appearance of the turning points and the critical values. The skin friction increases with the addition of nanoparticles, while the escalation of the anisotropic slip effect causes a reduction in the heat transfer rate.     

Dual solutions of a mixed convection flow near the stagnation point region over an exponentially stretching/shrinking sheet in nanofluids

The aim of this paper is to study the development of mixed convection flow near the stagnation point region over an exponentially stretching/shrinking sheet in nanofluids. The external flow, stretching velocity and wall temperature are assumed to vary as prescribed exponential functions. Using the local similarity method, it has been shown that dual solutions of velocity and temperature exist for certain values of suction/injection, mixed convection, nanoparticle volume fraction and stretching/shrinking parameters. The transformed non-linear ordinary differential equations along with the boundary conditions form a two point boundary value problem and are solved using Shooting method, by converting into an initial value problem. In this method, the system of equations is converted into a set of first order system which is solved by fourth-order Runge–Kutta method. Three different types of nanoparticles, namely copper (Cu), aluminum oxide (Al₂O₃) and titanium oxide (TiO₂) are considered by using water-based fluid with Prandtl number Pr = 6.2. It is also found that the skin friction coefficient and the heat transfer rate at the surface are highest for Copper–water nanofluids as compared to Al₂O₃. The effect of the solid volume fraction parameter φ of the nanofluids on the heat transfer characteristics is also investigated. The results indicate that dual solutions exist only for shrinking sheet. The effects of various parameters on the velocity and temperature profiles are also presented here.     

Effect of thermal radiation on heat transfer in an unsteady copper–water nanofluid flow over an exponentially shrinking porous sheet

The effect of thermal radiation on an unsteady boundary layer flow and heat transfer in a copper–water nanofluid over an exponentially shrinking porous sheet is investigated. With the use of suitable transformations, the governing equations are transformed into ordinary differential equations. Dual non-similarity solutions are obtained for certain values of some parameters. Owing to the presence of thermal radiation, the heat transfer rate is greatly enhanced, and the thermal boundary layer thickness decreases.     

Thermal radiation effect on a mixed convection flow and heat transfer of the Williamson fluid past an exponentially shrinking permeable sheet with a convective boundary condition

The thermal radiation effect on a steady mixed convective flow with heat transfer of a nonlinear (non-Newtonian) Williamson fluid past an exponentially shrinking porous sheet with a convective boundary condition is investigated numerically. In this study, both an assisting flow and an opposing flow are considered. The governing equations are converted into nonlinear ordinary differential equations by using a suitable transformation. A numerical solution of the problem is obtained by using the Matlab software package for different values of the governing parameters. The results show that dual nonsimilar solutions exist for the opposing flow, whereas the solution for the assisting flow is unique. It is also observed that the dual nonsimilar solutions exist only if a certain amount of mass suction is applied through the porous sheet, which depends on the Williamson parameter, convective parameter, and radiation parameter.     

Effect of melting on an MHD micropolar fluid flow toward a shrinking sheet with thermal radiation

The effect of melting on a steady boundary layer stagnation-point flow and heat transfer of an electrically conducting micropolar fluid toward a horizontal shrinking sheet in the presence of a uniform transverse magnetic field and thermal radiation is studied. A similarity transformation technique is adopted to obtain self-similar ordinary differential equations, which are solved numerically. The present results are found to be in good agreement with previously published data. Numerical results for the dimensionless velocity and temperature profiles, as well as for the skin friction and the rate of heat transfer are obtained.     

MHD flow of a viscous fluid on a nonlinear porous shrinking sheet with homotopy analysis method

The present paper investigates the magnetohydrodynamic（MHD） flow of a viscous fluid towards a nonlinear porous shrinking sheet.The governing equations are simplified by similarity transformations.The reduced problem is then solved by the homotopy analysis method.The pertinent parameters appearing in the problem are discussed graphically and presented in tables.It is found that the shrinking solutions exist in the presence of MHD.It is also observed from the tables that the solutions for f（0） with different values of parameters are convergent.     

Stability of dual solutions in stagnation-point flow and heat transfer over a porous shrinking sheet with thermal radiation

An analysis is carried out to study the steady two-dimensional stagnation-point flow and heat transfer of an incompressible viscous fluid over a porous shrinking sheet in the presence of thermal radiation. A set of similarity transformations reduce the boundary layer equations to a set of non-linear ordinary differential equations which are solved numerically using fourth order Runge-Kutta method with shooting technique. The analysis of the result obtained shows that as the porosity parameter β increases, the range of region of existence of similarity solution increases. It is also observed that multiple solutions exist for a certain range of the ratio of the shrinking velocity to the free stream velocity (i.e., α) which again depends on β. We then discuss the stability of the unsteady solutions about each steady solution, showing that one steady state solution corresponds to a stable solution whereas the other corresponds to an unstable solution. The stable solution corresponds to the physically relevant solution. Further we obtain numerical results for each solution, which enable us to discuss the features of the respective solutions.     

Unsteady three-dimensional boundary layer flow due to a permeable shrinking sheet

The unsteady viscous flow over a continuously permeable shrinking surface is studied. Similarity equations are obtained through the application of similar transformation techniques. Numerical techniques are used to solve the similarity equations for different values of the unsteadiness parameter, the mass suction parameter, the shrinking parameter and the Prandtl number on the velocity and temperature profiles as well as the skin friction coefficient and the Nusselt number. It is found that, different from an unsteady stretching sheet, dual solutions exist in a certain range of mass suction and unsteadiness parameters.     

MHD flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge

The steady flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge with magnetic field and radiation effects are studied. The governing equations of the hybrid nanofluid are converted to the similarity equations by techniques of the similarity transformation. The bvp4c function that is available in MATLAB software is utilized for solving the similarity equations numerically. The numerical results are obtained for selected different values of parameters. The results discover that two solutions exist, up to a certain value of the stretching/shrinking and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions for copper and wedge angle parameter increase. It is also found that the hybrid nanofluid enhances the heat transfer rate compared with the regular nanofluid. The reduction of the heat transfer rate is observed with the increase in radiation parameter. The temporal stability analysis is performed to analyze the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.     

Magnetohydrodynamic flow past a shrinking vertical sheet in a dusty hybrid nanofluid with thermal radiation

The magnetohydrodynamic(MHD) mixed convection flow past a shrinking vertical sheet with thermal radiation is considered. Besides, the effects of Cu-Al₂O₃ nanoparticles and dust particles are considered. The similarity variables reduce the governing equations to the similarity equations, which are then solved numerically. The outcome shows that, for the shrinking case, the solutions are not unique. The rate of heat transfer and the friction factor enlarge with increasing the...     

Asymptotic Analysis of the Nonlinear Boussinesq Problem for a Kind of Incompressible Rubber Material (Compression Case)

A half rubber space compressed by a concentrated force normal to the surface is asymptotically analyzed based on large strain elastic theory. The material domain near the singular point is divided into an expanding domain and a shrinking domain. The asymptotic equations are derived and solved individually for both domains. The solutions to expanding and shrinking domains are further assembled together so that there is only one free parameter left which can indicate the amplitude of the singular stress and strain field. Finally, the amplitude parameter of the field is determined by the given concentrated force. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dual solutions in MHD stagnation-point flow of Prandtl fluid impinging on shrinking sheet

The present article investigates the dual nature of the solution of the magneto- hydrodynamic （MHD） stagnation-point flow of a Prandtl fluid model towards a shrinking surface. The self-similar nonlinear ordinary differential equations are solved numerically by the shooting： method. It is found that the dual solutions of the flow exist for cer- tain values of tile velocity ratio parameter. The special case of the first branch solutions （the classical Newtonian fluid model） is compared with the present numerical results of stretching flow. The results are found to be in good agreement. It is also shown that the boundary layer thickness for the second solution is thicker than that for the first solution.