面向对象的土石坝参数随机反演程序设计

将储液容器流固耦合系统中的液体和容器分别视为理想可压缩流体和线弹 性固体，采用流体压力单元和固体壳单元对流固耦合系统进行有限元离散，得到一个非对称 的大型流固耦合有限元方程. 采用Arnoldi方法求解上面这个大型有限元方程的非对称特征 值问题，以得到储液容器的动力特性. 通过移频技术避免了处理零频问题，并构造了迭代格 式计算Arnoldi向量. 数值算例表明所用解法对于流固耦合系统都是非常有效的.     

线性与非线性流固耦合动力学数值方法的进展及应用（英文）

本文综述了线性与非线性流固耦合问题数值方法的进展及工程应用.讨论了四种数值分析方法:(1)混合有限元–子结构–子区域数值模型,以求解有限域线性流固耦合问题,如流体晃动,声腔–结构耦合,流体中的压力波,化工容器的地震响应,坝水耦合等;(2)混合有限元–边界元数值模型,以求解涉及无限域的线性流固耦合问题,如大型浮体承受飞机降落冲击,船舰的炮击回应等;(3)混合有限元–有限差分(体积)数值模型,以求解不涉及破浪和两相分离的非线性流固耦合问题;(4)混合有限元–光滑粒子数值模型,以求解涉及破浪和两相分离的非线性流固耦合问题.文中推荐分区迭代求解过程,以便应用现有的固体及流体求解器,于毎一时间步长分别求解固体及流体的方程,通过耦合迭代收敛,向前推进以达问题求解.文中选用的工程应用例子包含气–液–壳三相耦合,液化天然气船水晃动,人体步行冲击引起的声腔–建筑结构耦合,大型浮体承受飞机降落冲击的瞬态动力回应,涉及破浪和两相分离的气–翼耦合及结构于水上降落的冲击.数值分析结果与可用的实验或计算结果作了比较,以说明所述方法的精度及工程应用价值.文中列出了基于流固耦合的波能采积装置模型,以应用线性系统的共振及非线性系统的周期解原理,有效地采积波能.本文列出了231篇参考文献,以便读者进一步研讨所感兴趣方法.     

Developments of numerical methods for linear and nonlinear fluid-solid interaction dynamics with applications

本文综述了线性与非线性流固耦合问题数值方法的进展及工程应用. 讨论了四种数值分析方法: (1) 混合有限元-子结构-子区域数值模型, 以求解有限域线性流固耦合问题, 如流体晃动, 声腔-结构耦合, 流体中的压力波, 化工容器的地震响应,坝水耦合等; (2) 混合有限元-边界元数值模型, 以求解涉及无限域的线性流固耦合问题, 如大型浮体承受飞机降落冲击, 船舰的炮击回应等; (3) 混合有限元-有限差分(体积) 数值模型, 以求解不涉及破浪和两相分离的非线性流固耦合问题; (4) 混合有限元-光滑粒子数值模型, 以求解涉及破浪和两相分离的非线性流固耦合问题. 文中推荐分区迭代求解过程, 以便应用现有的固体及流体求解器, 于毎一时间步长分别求解固体及流体的方程, 通过耦合迭代收敛, 向前推进以达问题求解. 文中选用的工程应用例子包含气-液-壳三相耦合, 液化天然气船水晃动, 人体步行冲击引起的声腔-建筑结构耦合, 大型浮体承受飞机降落冲击的瞬态动力回应, 涉及破浪和两相分离的气-翼耦合及结构于水上降落的冲击. 数值分析结果与可用的实验或计算结果作了比较, 以说明所述方法的精度及工程应用价值. 文中列出了基于流固耦合的波能采积装置模型, 以应用线性系统的共振及非线性系统的周期解原理, 有效地采积波能. 本文列出了231 篇参考文献, 以便读者进一步研讨所感兴趣方法.     

基于同步交替法求解流体-弹性板耦合作用

基于预测-多步校正方法提出了流固耦合同步交替求解方法.采用ALE描述流固耦合问题.基于SUPG有限元对流体动量方程进行空间离散,以消除对流项引起的数值振荡.时间域上的积分采用预测-多步校正(predictor-multicorrector)方法.对流体和结构同时进行预测,在多步校正的过程中对流体和固体域动力学方程进行交替求解,从而在时间上达到同步推进.基于上述同步交替法,编程计算了流体-弹性板耦合作用问题,取得了良好的数值计算结果.     

线性与非线性流固耦合动力学数值方法的进展及应用

本文综述了线性与非线性流固耦合问题数值方法的进展及工程应用。讨论了四种数值分析方法：(1)混合有限元–子结构–子区域数值模型,以求解有限域线性流固耦合问题,如流体晃动,声腔–结构耦合,流体中的压力波,化工容器的地震响应,坝水耦合等;(2)混合有限元–边界元数值模型,以求解涉及无限域的线性流固耦合问题,如大型浮体承受飞机降落冲击,船舰的炮击回应等;(3)混合有限元–有限差分(体积)数值模型,以求解不涉及破浪和两相分离的非线性流固耦合问题;(4)混合有限元–光滑粒子数值模型,以求解涉及破浪和两相分离的非线性流固耦合问题。文中推荐分区迭代求解过程,以便应用现有的固体及流体求解器,于毎一时间步长分别求解固体及流体的方程,通过耦合迭代收敛,向前推进以达问题求解。文中选用的工程应用例子包含气–液–壳三相耦合,液化天然气船水晃动,人体步行冲击引起的声腔–建筑结构耦合,大型浮体承受飞机降落冲击的瞬态动力回应,涉及破浪和两相分离的气–翼耦合及结构于水上降落的冲击。数值分析结果与可用的实验或计算结果作了比较,以说明所述方法的精度及工程应用价值。文中列出了基于流固耦合的波能采积装置模型,以应用线性系统的共振及非线性系统的周期解原理,有效地采积波能。本文列出了231篇参考文献,以便读者进一步研讨所感兴趣方法。     

非线性流体-刚体结构相互作用问题的一种数值模拟方法

给出了一种模拟非线性流体-刚体结构相互作用问题的数值方法．文中假定结构承受大的刚体运动,流体流动受非线性有粘或无粘的场方程支配并满足自由表面和两相耦合界面上的非线性边界条件,利用任意拉氏-欧氏（ALE）网格系统构造了数值模型．采用所探讨的多块数值格式,允许可动重造网格间有独立的相对运动,从而克服了流体网格与固体大运动匹配的困难．通过数值离散化,导出了描述非线性流固耦合动力学的数值方程并应用耦合迭代过程对其作了求解．通过算例,说明了所提出数值模型的应用．     

树木在风中摇曳的流固耦合数值模拟方法探索

树木在风中摇曳是一个流固耦合问题,但树的结构复杂,无法直接用已有的流固耦合数值方法来模拟.本文提出一种基于虚拟耦合面的流固耦合方法,该方法用一个虚拟的连续曲面把树冠包裹起来,在这个曲面上建立流固耦合关系,并将虚拟曲面上计算得到的风荷载作为树木结构的外力进行加载.虚拟耦合面本身不妨碍树木枝条的运动,且能避免在每个枝条、树...     

基于ALE有限元法的流固耦合强耦合数值模拟

针对不同流固耦合问题,提出一种基于任意拉格朗日-欧拉(ALE)有限元技术的分区强耦合算法.运用半隐式特征线分裂算法求解ALE描述下的不可压缩黏性流体Navier-Stokes方程.分别考虑一般平面运动刚体和几何非线性固体,采用复合隐式时间积分法推进结构运动方程,故可选用较大时间步长;进一步应用单元型光滑有限元法求解几何非线性固体大变形,获得更精确结构解且不影响计算效率.运用子块移动技术结合正交-半扭转弹簧近似法高效更新流体动网格;同时将一质量源项引入压力泊松方程满足几何守恒律,无需复杂构造网格速度差分格式.采用简单高效的固定点法配合Aitken动态松弛技术实现各场耦合,可灵活选择先进单场求解技术,具备较好程序模块性.运用本文算法分别模拟了H型桥梁截面颤振问题和均匀管道流内节气阀涡激振动问题.研究表明,数值结果与已有文献数据吻合,计算精度和求解效率均令人满意.     

航行体水下发射流固耦合效应分析

对于水下发射过程来说,掌握水动力载荷形成机理与结构响应特征是一个亟待解决的问题.研究该问题需要考虑含相变的复杂多相流动,变约束的结构运动以及这二者之间的耦合效应.本文采用松耦合的方法,以流体求解器为主体,将自编的固体结构程序接入流体求解器中,在每个时间步长内分别对流体动力学方程和固体结构动力学方程进行求解,通过流固界面之间的数据交换实现耦合计算.其中,流体求解器基于雷诺平均纳维斯托克斯方程,采用单流体模型处理多相流问题,引入空化模型描述空化相变,采用修正的湍流模型模拟混合物的湍流效应,并采用动网格技术处理移动边界问题.航行体的刚体运动和结构振动分开求解.结构求解器采用等效梁模型描述结构的振动,通过坐标变换给出了随体坐标系下的结构振动方程,求解方法采用时域积分法.所建立的流固耦合方法不仅能够捕捉到自然空化的演化情况,还可获得航行体所受水动力、结构振动响应以及截面的弯矩,获得了实验的验证.基于该方法研究了结构刚度、发射速度对空泡溃灭与结构振动耦合效应的影响规律.结果表明,同步溃灭是影响结构载荷的主要因素,包括溃灭压力幅值,溃灭压力作用位置,以及溃灭压力与结构振动的相位关系.     

流固耦合地震波动问题的显式谱元模拟方法

流固耦合地震波动问题主要研究由流体和固体构成的复杂系统中地震波传播特性及其规律. 传统模拟方法中一般以声波方程、弹性波方程的数值解分别描述理想流体和弹性固体中的波动, 并实时地处理两种不同性质介质之间的相互耦合作用, 数值格式复杂且限制数值模拟精度与计算效率. 本文采用谱元法结合多次透射公式人工边界条件实现了一种流固耦合地震波动问题的高阶显式数值计算方法. 该方法利用了流固耦合问题统一计算框架,可将饱和多孔介质的Biot波动方程分别退化为理想流体的声波方程和弹性固体的弹性波方程. 通过P波垂直入射的水平成层理想流体-饱和多孔介质-弹性固体场地模型、P波斜入射的不规则层状界面以及任意形状界面的理想流体-饱和多孔介质-弹性固体场地模型等三个算例, 与传递函数法解析解以及集中质量有限元法计算结果进行对比分析, 证明了本文方法的正确性与有效性. 数值模拟结果表明, 本文方法相较传统有限元法可以少得多的节点数量获得更高的数值精度, 并且在较宽的频率范围内都能可靠地模拟出流固耦合系统的动力响应, 充分体现出本文方法兼顾高精度、计算效率和复杂场地建模灵活的特点.      

Shape optimisation of wall structures located in solitary wave flows

ABSTRACT

In this paper, we present a shape optimisation method for wall structures due to the wave force induced by a solitary wave. The fluid is assumed to be incompressible. Introducing the adiabatic assumption in addition, the acoustic velocity method presented by the author's group, the SUPG finite element method, is effectively used. To evaluate the wave force, we use the performance functional, which consists of the sum of the square of the wave force integrated between the starting and final times. The coordinates of the wall structure are regulated to obtain the minimum performance functional. The adjoint equation method is utilised to derive the gradient of the performance functional with respect to the coordinates. The simple weighted gradient method is employed as the minimisation procedure. Two numerical studies show that the results are consistent with existing structures and provide useful information on the practical design of coastal structures.     

Localized coherent structures of the (2+1)-dimensional higher order Broer-Kaup equations

ＩｎｔｒｏｄｕｃｔｉｏｎＳｏｌｉｔｏｎｉｓａｃｏｍｐｌｉｃａｔｅｄｍａｔｈｅｍａｔｉｃａｌｓｔｒｕｃｔｕｒｅｂａｓｅｄｏｎｔｈｅｎｏｎｌｉｎｅａｒｅｖｏｌｕｔｉｏｎｅｑｕａｔｉｏｎ[1].Ｔｈｏｕｇｈｓｏｌｉｔｏｎｓｔｒｕｃｔｕｒｅｓａｎｄｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅ ( 1 + 1 )＿ｄｉｍｅｎｓｉｏｎａｌｎｏｎｌｉｎｅａｒｐｈｙｓｉｃａｌｍｏｄｅｌｓｈａｖｅｂｅｅｎｓｔｕｄｉｅｄｗｅｌｌａｎｄｕｎｄｅｒｓｔｏｏｄｆｕｒｔｈｅｒ,ｔｈｅｓｏｌｉｔｏｎｓｔｒｕｃｔｕｒｅｓｉｎｈｉｇｈｅｒｓｐａｔｉａｌｄｉ…     

On Boundary Damping for a Weakly Nonlinear Wave Equation

In this paper an initial-boundary value problem for a weakly nonlinear string(or wave) equation with non-classical boundary conditions is considered. Oneend of the string is assumed to be fixed and the other end of the string isattached to a spring-mass-dashpot system, where the damping generated by thedashpot is assumed to be small. This problem can be regarded as a rather simple model describing oscillationsof flexible structures such as suspension bridges or overhead transmission lines in a windfield. A multiple-timescales perturbation method will be usedto construct formal asymptotic approximations of the solution. It will also beshown that all solutions tend to zero for a sufficiently large value of thedamping parameter. For smaller values of the damping parameter it will be shownhow the string-system eventually will oscillate.     

ARC-length method for differential equations

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｏｒｄｉｎａｒｙａｎｄｐａｒｔｉａｌｄｉｆｅｒｅｎｔｉａｌｅｑｕａｔｉｏｎｓｏｆｃｏｎｔｉｎｕｕｍｐｒｏｂｌｅｍａｒｅｏｆｔｅｎｗｉｔｈｃｅｒｔａｉｎｔｙｐｅｓｏｆｓｉｎｇｕｌａｒｉｔｙａｓｓｔｉｆｐｒｏｐｅｒｔｙ,ｏｒ...     

一种计算非比例阻尼结构地震响应的新方法

在非比例阻尼结构地震响应分析中, 直接积分法和强迫解耦法均具有鲜明的优缺点, 考虑到计算精度和计算效率的均衡, 提出了一种可用于非比例阻尼结构地震响应计算的新方法---多自由度模态方程方法. 同时, 通过推导指出了直接积分法和强迫解耦法是所提出方法的两种特殊形式, 从而构建了非比例阻尼结构地震响应计算方法的完整理论体系. 最后采用数值算例验证了多自由度模态方程方法在非比例阻尼结构地震响应计算中的有效性, 并说明其可以通过合理划分结构分区来调节计算精度和计算效率.      

On a Rayleigh Wave Equation with Boundary Damping

In this paper an initial-boundary value problem for a weakly nonlinear string (or wave) equation with non-classical boundary conditions is considered. One end of the string is assumed to be fixed and the other end of the string is attached to a dashpot system, where the damping generated by thedashpot is assumed to be small. This problem can be regarded as a simple model describing oscillations of flexible structures such as overhead transmission lines in a windfield. An asymptotic theory for a class ofinitial-boundary value problems for nonlinear wave equations is presented. Itwill be shown that the problems considered are well-posed for all time t. A multiple time-scales perturbation method incombination with the method of characteristics will be used to construct asymptotic approximations of the solution. It will also be shown that all solutions tend to zero for a sufficiently large value of the damping parameter. For smaller values of the damping parameter it will be shown how the string-system eventually will oscillate. Some numerical results are alsopresented in this paper.     

A new auxiliary equation method for finding travelling wave solutions to KdV equation

In this paper, a new auxiliary equation method is used to find exact travelling wave solutions to the （1＋1）-dimensional KdV equation. Some exact travelling wave solu- tions with parameters have been obtained, which cover the existing solutions. Compared to other methods, the presented method is more direct, more concise, more effective, and easier for calculations. In addition, it can be used to solve other nonlinear evolution equations in mathematical physics.     

A fully conservative high‐order upwind multi‐moment method using moments in both upwind and downwind cells

We propose a fully conservative high‐order upwind multi‐moment method for the conservation equation. The proposed method is based on a third‐order polynomial interpolation function and semi‐Lagrangian formulation and is a variant of the constrained interpolation profile conservative semi‐Lagrangian scheme with third‐order polynomial function method. The third‐order interpolation function is constructed based on three constraints in the upwind cell (two boundary values and a cell average) and a constraint in the downwind cell (a cell center value). The proposed method shows fourth‐order accuracy in a benchmark problem (sine wave propagation). We also propose a less oscillatory formulation of the proposed method. The less oscillatory formulation can minimize numerical oscillations. These methods were validated through scalar transport problems, and compressible flow problems (shock tube and 2D explosion problems). Copyright © 2016 John Wiley & Sons, Ltd.     

Numerical modeling of wave interactions with coastal structures by a constrained interpolation profile/immersed boundary method

A high‐order difference method based multiphase model is proposed to simulate nonlinear interactions between water wave and submerged coastal structures. The model is based on the Navier–Stokes equations using a constrained interpolation profile (CIP) method for the flow solver, and employs an immersed boundary method (IBM) for the treatment of wave–structure interactions. A more accurate interface capturing scheme, the volume of fluid/weighed line interface calculation (VOF/WLIC) scheme, is adopted as the interface capturing method. A series of computations are performed to verify the application of the model for simulations of fluid interaction with various structures. These problems include flow over a fixed cylinder, water entry of a circular cylinder and solitary waves passing various submerged coastal structures. Computations are compared with the available analytical, experimental and other numerical results and good agreement is obtained. The results of this study demonstrate the accuracy and applications of the proposed model to simulate the nonlinear flow phenomena and capture the complex free surface flow. Copyright © 2015 John Wiley & Sons, Ltd.     

SOME PROBLEMS WITH THE METHOD OF FUNDAMENTAL SOLUTION USING RADIAL BASIS FUNCTIONS

The present work describes the application of the method of fundamental solutions (MFS) along with the analog equation method (AEM) and radial basis function (RBF) approximation for solving the 2D isotropic and anisotropic Helmholtz problems with different wave numbers. The AEM is used to convert the original governing equation into the classical Poisson's equation, and the MFS and RBF approximations are used to derive the homogeneous and particular solutions, respectively. Finally, the satisfaction of the solution consisting of the homogeneous and particular parts to the related governing equation and boundary conditions can produce a system of linear equations, which can be solved with the singular value decomposition (SVD) technique. In the computation, such crucial factors related to the MFS-RBF as the location of the virtual boundary, the differential and integrating strategies, and the variation of shape parameters in multi-quadric (MQ) are fully analyzed to provide useful reference.