基于干扰观测器的柔性关节空间机器人退步自适应控制

研究了载体位置、姿态均不受控的情况下,系统参数不确定的柔性关节空间机器人轨迹跟踪的控制问题.结合系统动量、动量矩守恒关系,利用拉格朗日法推导出系统的动力学模型.为减小系统柔性关节对系统控制精度的影响,采用关节柔性补偿器来等效降低系统关节的柔性.再借助奇异摄动法,针对系统参数不确定的情况,设计了柔性关节空间机器人基于干扰观测器的退步自适应滑模控制方案.该方案不需要对系统惯性参数进行线性化处理,控制器结构简单,且实现了空间机器人期望轨迹的精确跟踪控制.通过平面两杆空间机器人的数值仿真证明了该方法的有效性.     

Orientation-error observer-based tracking control of nonholonomic mobile robots

In this paper, a novel trajectory tracking controller is proposed for mobile robots with unknown orientation angle by employing the orientation-error observer (OEO). In order to overcome the local stability resulted from linearization design methods, an asymptotically stable controller is designed using Lyapunov’s direct method. This method breaks down nonlinear systems into low-dimensional systems and simplifies the controller design using virtual auxiliary error function and partial Lyapunov functions. A state-feedback controller for the nonlinear error dynamics of the mobile robot is combined with an observer that estimates the orientation-error based on available trajectory information and measurement of the position coordinates. The stability of the system is easily proved via the Lyapunov theory. Abundant simulation and experiment results validate the effectiveness and superiority of the proposed control method.     

Discrete adaptive fuzzy control for asymptotic tracking of robotic manipulators

This paper presents a novel discrete adaptive fuzzy controller for electrically driven robot manipulators. It addresses how to overcome the nonlinearity, uncertainties, discretizing error and approximation error of the fuzzy system for asymptotic tracking control of robotic manipulators. The proposed controller is model-free in the form of discrete Mamdani fuzzy controller. The parameters of fuzzy controller are adaptively tuned using an adaptive mechanism derived by stability analysis. A robust control term is used to compensate the approximation error of the fuzzy system for asymptotic tracking of a desired trajectory. The controller is robust against all uncertainties associated with the robot manipulator and actuators. It is easy to implement since it requires only the joint position feedback. Compared with fuzzy controllers which employ all states to guarantee stability, the proposed controller is very simpler. Stability analysis and simulation results show its efficiency in the tracking control.     

空间双臂机器人抓捕翻滚目标后的鲁棒稳定控制

针对空间双臂机器人抓捕翻滚目标的稳定控制问题, 由于目标惯性参数的不确定性以及双臂同时作用于目标存在内力挤压, 已有的稳定控制方法无法有效地约束机械臂末端与目标的接触力与力矩, 无法保证控制过程中抓捕点处的接触安全. 为此, 本文考虑被抓捕目标惯性参数不确定性与双臂内力挤压对抓捕后阶段组合体稳定控制的影响, 提出了一种保证接触安全的鲁棒稳定控制方法. 首先, 根据目标的有界不确定性构造鲁棒正不变集, 同时考虑双臂与目标接触内力的影响, 利用预测控制方法在该不变集内规划控制目标运动的虚拟接触力与力矩. 然后, 根据目标动力学模型以及空间双臂机器人的运动约束, 规划空间双臂机器人的鲁棒安全期望运动轨迹. 最后, 利用障碍李雅普诺夫函数构造跟踪控制器, 使空间双臂机器人有效地跟踪期望轨迹, 从而使得翻滚目标运动受到等效于虚拟控制律的作用, 在保证接触安全的同时实现鲁棒的稳定控制. 通过空间双臂机器人稳定翻滚目标的仿真算例验证了所提方法的有效性.      

A particle swarm optimization approach for fuzzy sliding mode control for tracking the robot manipulator

In this paper, an optimal fuzzy sliding mode controller is used for tracking the position of robot manipulator, is presented. In the proposed control, initially by using inverse dynamic method, the known sections of a robot manipulator’s dynamic are eliminated. This elimination is done due to reduction over structured and unstructured uncertainties boundaries. In order to overcome against existing uncertainties for the tracking position of a robot manipulator, a classic sliding mode control is designed. The mathematical proof shows the closed-loop system in the presence of this controller has the global asymptotic stability. Then, by applying the rules that are obtained from the design of classic sliding mode control and TS fuzzy model, a fuzzy sliding mode control is designed that is free of undesirable phenomena of chattering. Eventually, by applying the PSO optimization algorithm, the existing membership functions are adjusted in the way that the error tracking robot manipulator position is converged toward zero. In order to illustrate the performance of the proposed controller, a two degree-of-freedom robot manipulator is used as the case study. The simulation results confirm desirable performance of optimal fuzzy sliding mode control.     

考虑摩擦特性的柔性关节空间机器人自适应CMAC神经网络鲁棒控制

讨论了关节摩擦力矩影响下,具有柔性铰关节的漂浮基空间机器人系统的动力学控制问题.设计了基于高斯基函数的小脑神经网络(CMAC)鲁棒控制器和摩擦力矩补偿器.用奇异摄动理论对系统的动力学模型进行快慢变子系统分解,针对快变子系统,设计力矩微分反馈控制器来抑制机械臂关节柔性引起的振动;对于慢变子系统,设计了基于自适应CMAC神...     

多体系统轨迹跟踪的瞬时最优控制保辛方法

随着近年来机器人在各行业领域的广泛应用,对机器人的动力学与控制性能不断提出新的要求,特别是对设计越来越复杂、操作越来越灵巧的智能机器人,要求其能够对目标轨迹实现高精度跟踪以满足实际工作需求. 因此,针对机器人多体系统对目标轨迹跟踪的任务需求,基于微分代数方程提出瞬时最优控制保辛方法. 首先,采用多体动力学绝对坐标建模方法建立机器人系统的普适动力学方程,即微分代数方程;然后,采用保辛方法将连续时间域内的微分代数方程进行离散化,进而得到以当前位置、速度和拉式乘子为未知量的非线性代数方程组;其次,通过引入对目标轨迹跟踪以及对控制加权的瞬时最优性能指标,根据瞬时最优控制理论获得当前最优控制输入;最后,通过离散时间步的更新完成对目标轨迹的跟踪任务. 为了验证本文方法的有效性,以双摆轨迹跟踪控制为例进行了数值仿真,结果表明:针对机器人轨迹跟踪任务所提出的瞬时最优控制保辛方法能够实现对目标轨迹的高精度跟踪,且瞬时最优控制由受控微分代数方程推导获得,更具一般性,能够适应其他复杂多体系统的轨迹跟踪控制问题.      

Adaptive tracking control of wheeled mobile robots with unknown longitudinal and lateral slipping parameters

An adaptive control approach is proposed for trajectory tracking of wheeled mobile robot (WMR) with unknown longitudinal and lateral slipping. A kinematic model of tracked WMR is established in this paper, in which both longitudinal and lateral slipping are considered and processed as three time-varying parameters. Sliding mode observer is then introduced to real time estimate the slip parameters online. A stable tracking control law for this robot system is proposed by backstepping method, and the asymptotic stability is guaranteed by Lyapunov theory. Meanwhile, the controller gains are determined online by poles placement method. Simulation results show the effectiveness and robustness of the proposed method.     

Adaptive robust control methodology for active roll control system with uncertainty

The active roll control system (ARCS) can impose anti-roll moment quickly to prevent the vehicle rolling when the vehicle generates the roll tendency and effectively enhance the vehicle dynamic performance without sacrificing the ride comfort. In the dynamic model of the ARCS, the sprung mass of the vehicle is considered to be the uncertain parameter, which is (possibly) fast-varying. However, what we know about the uncertainty is just that it is bounded. Furthermore, the bound is unknown. The target roll angle is regarded as the constraint when the vehicle equipped with the ARCS is running under a given case. Taking the parameter uncertainty and possible initial condition deviation from the constraint into account, an adaptive robust control scheme based on the Udwadia and Kalaba’s approach is proposed to drive the ARCS to follow the pre-specified constraint approximately. The adaptive law is of leakage type which can adjust itself based on the tracking error. Numerical simulation shows that by using the adaptive robust control scheme, the error between the actual roll angle and the desired roll angle converges to zero quickly in 0.3 s from initial error 0.287 deg, and the final error is of the order of \(10^{-7}\). Thus, the control design renders the ARCS practically stable and achieves constraints following maneuvering.     

Adaptive robust control of Mecanum-wheeled mobile robot with uncertainties

This paper presents a novel implementation of an adaptive robust second-order sliding mode control (ARSSMC) on a mobile robot with four Mecanum wheels. Each wheel of the mobile robot is actuated by separate motors. It is the first time that higher-order sliding mode control method is implemented for the trajectory tracking control of Mecanum-wheeled mobile robot. Kinematic and dynamic modeling of the robot is done to derive an equation of motion in the presence of friction, external force disturbance, and uncertainties. In order to make the system robust, second-order sliding mode control law is derived. Further, adaptive laws are defined for adaptive estimation of switching gains. To check the tracking performance of the proposed controller, simulations are performed and comparisons of the obtained results are made with adaptive robust sliding mode control (ARSMC) and PID controller. In addition, a new and low-cost experimental approach is proposed to implement the proposed control law on a real robot. Experimental results prove that without compromising on the dynamics of the robot real-time implementation is possible in less computational time. The simulation and experimental results obtained confirms the superiority of ARSSMC over ARSMC and PID controller in terms of integral square error (ISE), integral absolute error (IAE), and integral time-weighted absolute error (ITAE), control energy and total variance (TV).     

考虑气动参数扰动的再入轨迹快速优化方法

针对传统再入轨迹优化方法收敛速度慢、对初值敏感程度高等的局限性,提出了一种基于序列凸优化的再入轨迹快速求解方法.该方法以倾侧角的变化率作为控制量,改进了现有凸化策略,考虑到抑制数值优化过程中由于数值离散方式带来的锯齿化现象,采用 B 样条曲线离散控制量,同时为避免算法在初始猜想值附近出现伪不可行的问题,增加额外虚拟控制量,通过一种"回溯直线"搜索的方法,提高算法的稳定性、快速性和寻优结果的光滑性.为研究飞行器再入过程中的气动参数扰动问题,采用采样点少、易于实现,计算效率高的广义混沌多项式理论研究方法,建立了基于广义混沌多项式和凸优化相结合的再入轨迹鲁棒优化模型,该模型在优化过程中考虑气动参数扰动对寻优结果的影响作用,避免了传统轨迹与制导律的复杂迭代设计环节,可有效降低优化轨迹对气动参数扰动的敏感程度,在气动参数不确定条件的干扰下,依然可以保证飞行器顺利安全的完成飞行任务.最后,以美国某可重复使用飞行器的再入任务为例,验证了基于序列凸优化的再入轨迹优化方法的快速性以及鲁棒优化模型对气动参数扰动的抗干扰性能力,表明了该方法具有一定的工程应用性.      

FAST OPTIMIZATION METHOD OF REENTRY TRAJECTORY CONSIDERING AERODYNAMIC PARAMETER PERTURBATION

针对传统再入轨迹优化方法收敛速度慢、对初值敏感程度高等的局限性,提出了一种基于序列凸优化的再入轨迹快速求解方法.该方法以倾侧角的变化率作为控制量,改进了现有凸化策略,考虑到抑制数值优化过程中由于数值离散方式带来的锯齿化现象,采用 B 样条曲线离散控制量,同时为避免算法在初始猜想值附近出现伪不可行的问题,增加额外虚拟控制量,通过一种"回溯直线"搜索的方法,提高算法的稳定性、快速性和寻优结果的光滑性.为研究飞行器再入过程中的气动参数扰动问题,采用采样点少、易于实现,计算效率高的广义混沌多项式理论研究方法,建立了基于广义混沌多项式和凸优化相结合的再入轨迹鲁棒优化模型,该模型在优化过程中考虑气动参数扰动对寻优结果的影响作用,避免了传统轨迹与制导律的复杂迭代设计环节,可有效降低优化轨迹对气动参数扰动的敏感程度,在气动参数不确定条件的干扰下,依然可以保证飞行器顺利安全的完成飞行任务.最后,以美国某可重复使用飞行器的再入任务为例,验证了基于序列凸优化的再入轨迹优化方法的快速性以及鲁棒优化模型对气动参数扰动的抗干扰性能力,表明了该方法具有一定的工程应用性.     

Fuzzy observer-based command filtered tracking control for uncertain strict-feedback nonlinear systems with sensor faults and event-triggered technology

For the trajectory tracking problem of nth-order uncertain nonlinear systems with sensor faults, a fuzzy controller based on command filtered and event-triggered technology is designed to improve the tracking error of the system. Concurrently, a fault-tolerant control scheme is introduced to effectively solve the problem of sudden output sensor failure. Additionally, the proposed controller can also greatly avoid complexity explosion problem of derivations of virtual control laws, which makes the design of the controller simpler. Furthermore, an effective observer is designed to solve the problem of system state immeasurability. Therefore, the proposed control scheme makes the design of the controller more convenient and flexible. According to Lyapunov stability theory, it is proved that all closed-loop signals are uniformly and ultimately bounded. Finally, two simulation examples of second-order nonlinear system and single-link robot show the effectiveness of the proposed scheme.

     

闭环双臂空间机器人系统运动规划的双向逼近方法

讨论了载体位置、姿态均不受控制的闭环双臂空间机器人系统的非完整运动规划问题. 以系统动量、动量矩守恒关系及几何约束条件为基础，建立了控制设计所需的系统状态方程； 并通过对状态方程应用双向Lyapunov方法，获得了机械臂关节角的控制输入方程，从而达到 对载体姿态及机械臂关节角的双重控制效果. 该方法的优点是减少了载体姿态控制燃料的消 耗，有效地延长了空间机器人系统的使用寿命. 通过一个平面自由漂浮闭环双臂空间机器人系统 的数值仿真，证明了方法的有效性.     

基于虚拟力概念的柔性臂空间机器人模糊退步自适应控制算法设计

讨论了漂浮基柔性臂空间机器人系统的动力学模拟、运动轨迹跟踪控制算法设计及柔性振动主动抑制。采用多体动力学建模方法并结合假设模态法,建立了漂浮基柔性臂空间机器人的系统动力学模型。基于该模型,针对系统惯性参数未知情况,提出了刚性运动基于模糊基函数网络自适应调节的退步控制算法,以完成柔性臂空间机器人载体姿态及机械臂各关节铰的协调运动。然后,为了主动抑制系统柔性振动,运用虚拟力的概念,构造了同时反映柔性模态和刚性运动轨迹的混合期望轨迹,通过改造原有的控制算法,提出了基于虚拟力概念的模糊退步自适应控制算法;这样不但保证了之前刚性运动控制方案对模型不确定的鲁棒性,而且能主动抑制柔性振动,从而提高了轨迹跟踪性能。理论分析及数值仿真算例均表明了控制方法的可行性。     

Dynamics and adaptive control of a dual-arm space robot with closed-loop constraints and uncertain inertial parameters简

A dynamics-based adaptive control approach is proposed for a planar dual-arm space robot in the presence of closed-loop constraints and uncertain inertial parameters of the payload. The controller is capable of controlling the po- sition and attitude of both the satellite base and the payload grasped by the manipulator end effectors. The equations of motion in reduced-order form for the constrained system are derived by incorporating the constraint equations in terms of accelerations into Kane＇s equations of the unconstrained system. Model analysis shows that the resulting equations perfectly meet the requirement of adaptive controller design. Consequently, by using an indirect approach, an adaptive control scheme is proposed to accomplish position/attitude trajectory tracking control with the uncertain parameters be- ing estimated on-line. The actuator redundancy due to the closed-loop constraints is utilized to minimize a weighted norm of the joint torques. Global asymptotic stability is proven by using Lyapunov＇s method, and simulation results are also presented to demonstrate the effectiveness of the proposed approach.     

Combined control of fast attitude maneuver and stabilization for large complex spacecraft

In remote sensing or laser communication space missions, spacecraft need fast maneuver and fast stabilization in order to accomplish agile imaging and attitude tracking tasks. However, fast attitude maneuvers can easily cause elastic deformations and vibrations in flexible appendages of the spacecraft. This paper focuses on this problem and deals with the combined control of fast attitude maneuver and sta- bilization for large complex spacecraft. The mathematical model of complex spacecraft with flexible appendages and momentum bias actuators on board is presented. Based on the plant model and combined with the feedback controller, modal parameters of the closed-loop system are calculated, and a multiple mode input shaper utilizing the modal information is designed to suppress vibrations. Aiming at reducing vibrations excited by attitude maneuver, a quintic polynomial form rotation path planning is proposed with constraints on the actuators and the angular velocity taken into account. Attitude maneuver simulation results of the control systems with input shaper or path planning in loop are sepa- rately analyzed, and based on the analysis, a combined control strategy is presented with both path planning and input shaper in loop. Simulation results show that the combined control strategy satisfies the complex spacecraft＇s require- ment of fast maneuver and stabilization with the actuators＇ torque limitation satisfied at the same time.     

存在关节死区的空间机器人无扰快速终端滑模控制

针对机械臂一般操作过程中运动学的非完整特性进行运动规划时没有考虑机械臂与待抓取目标之间的关系与关节的实际特性, 研究了存在关节死区的漂浮基平面三连杆空间机械臂拦截目标前最后阶段的载体无扰动空间规划与控制. 首先根据拉格朗日第二类方程, 建立存在关节死区的载体位姿均不受控的漂浮基平面三连杆空间机械臂的动力学模型, 推导出三连杆空间机械臂反作用零空间的数学模型, 并对反作用零空间进行向量范数约束算法研究; 进而提出了一种具有抗干扰性与高收敛性的非奇异快速终端滑模控制算法实现系统的姿态无扰控制, 该方法采用变系数双幂次趋近率与非奇异快速终端滑模面相结合的方式, 提高系统状态收敛速度与抗干扰性. 为了消除机械臂关节存在的死区特性, 设计了自适应死区补偿器, 通过自适应控制来逼近死区特性的上界, 以消除关节死区对系统带来的影响, 确保跟踪控制的有效执行. 最后基于Lyapunov函数法证明了系统的稳定性, 并通过系统数值仿真结果验证了存在死区情况下机械臂的各关节角跟踪上无反应空间下的期望轨迹的同时载体的姿态处于稳定状态, 验证了所提方法的有效性.      

Airship horizontal trajectory tracking control based on Active Disturbance Rejection Control (ADRC)

Aiming at flight property of airship, a trajectory tracking controller of airship horizontal model is designed based on active disturbance rejection control (ADRC). The six Degree of Freedom (DOF) dynamic model of airship is simplified at a horizontal plane. ADRC is used to realize the decoupling control for the multivariable system. The uncertain items of the model and external disturbances are estimated by the extended state observer (ESO) and dynamic feedback compensation is carried on at real time. The disturbance of wind is added to the simulation environment. The simulation results show that the designed tracking controller can overcome the influences of uncertain items of the model and external disturbances, and track the desired trajectory rapidly and steadily, and possess good robustness and control performances.     

论轮式移动结构的非完整约束及其运动控制

当质点沿光滑曲线运动时,必须满足横向速度为零的条件.同样地,不同轮式移动结构在平面上做光滑曲线运动时都需要满足该非完整约束条件.本文结合轮子转速和它们运动速度的完整约束关系,理清各轮式移动结构的完整和非完整约束,然后利用 Euler-Lagrange 方程方便地推导出相应的动力学方程.另外,通过该非完整约束,将目标轨迹曲线转化为速度目标的形式,然后引入目标轨迹曲线的相对曲率设计合适的动态跟踪目标.进一步,通过采用该动态跟踪目标可以将轮式移动结构的运动规律和动力学方程有机结合起来,并将原运动任务简化为一般的 轨迹 控制问题.基于该动态跟踪目标可以为轮式移动结构设计合适的鲁棒跟踪控制器,通过跟踪目标轨迹曲线的相对曲率来实现对目标曲线的精确跟踪.最后,理论分析和仿真结果显示,采用动态目标跟踪方法能够从根本上解决初始速度误差过大和位置误差不断被累积的问题,即使前向速度误差系统不稳定的,实际运动轨迹也几乎能和目标轨迹曲线重合.