共查询到20条相似文献,搜索用时 46 毫秒
1.
底部两层框剪砖房层间侧移刚度比的合理取值 总被引:1,自引:0,他引:1
底部框剪结构多层砖房在城市建设中应用广泛。这种房屋的特点是由两种承重和抗侧力体系构成的。以典型房屋为基础。编制了剪切型结构弹塑性动力时程分析通用程序,通过减小剪力墙厚度。数量或材料标号的方法,基佗层的质量和刚度不变,采用多种层间侧移刚度比以及多种层数进行了弹塑性动力分析。讨论了这类房屋相邻层间侧移刚度比的合理取值问题,可供工程设计和编制有关的规范,规程参考。 相似文献
2.
3.
采用杆系-层模型,将计算结构静力可靠度的改进的JC法、常规有限元法及时程分析法相结合,建立了抗震结构弹塑性变形能力可靠度时域随机算法。本文方法可充分考虑结构参数及地震作用的随机性以及地震作用与静载的共同影响;可对结构侧向变形能力作地震全过程弹塑性时变可靠度分析。采用本文方法及MC模拟算法分析了一榀三层铪框架侧向变形能力弹塑性时变可靠度,结果表明了本文方法的合理性与有效性。 相似文献
4.
半刚接钢框架的动力分析 总被引:3,自引:0,他引:3
推导了半刚接钢框架动力有限元的质量矩阵和刚度矩阵.建立了具有不同节点初始刚度的半刚接多层钢框架及相应刚性框架的计算模型.采用ANSYS软件进行数值模拟分析,研究了节点刚度对结构自振频率的影响以及结构在谐振荷载作用下的响应,对地震波激励下的结构进行了时程分析.分析结果表明不半刚接框架节点的柔性对结构自振频率产生较大的影响,节点柔性越大,结构自振频率降低也越大,结构的抗震设计应考虑节点柔性的影响;半刚接钢框架顶点位移和柱底剪力时程曲线在地震波激励时间内表现出良好的稳定性,柔性连接可以代替刚性节点用于抗震区的钢框架设计中. 相似文献
5.
本文系统地论述了抗震结构的概率弹塑性设计理论与方法(包括设计用随机地震动、结构弹塑性随机反应分析和动力可靠性分析、地震损失分析、期望破损度设计、可靠性设计和双目标优化设计)及其在工程结构(钢结构、钢筋混凝土结构和砌体结构)中的应用。 相似文献
6.
7.
8.
9.
近年来基于功能的结构抗震设计思想逐渐被世界各国地震工程界所接受,与现行抗震规范相比,它在遵循“投资—效益”准则的基础上,更加注重结构在进入弹塑性状态后的表现,并且采用具体的量化指标(结构最大层间变形)来衡量。由于结构抗震设计中存在着大量不确定性,结构可靠度分析成为结构设计中的一个重要工具。本文以钢框架结构为例,考虑了结构抗震设计中的各种不确定性,包括地震作用、结构构件面积、材料弹性模量、恒荷载和活荷载的随机性,采用概率统计理论中的K—S检验法,对最大弹塑性层间变形的概率统计特性进行了分析。结果表明,在给定烈度的地震作用下钢框架结构的最大弹塑性层间变形,在其均值较小时服从极值I型分布,在均值较大时服从极值Ⅱ型分布。以上结论可为研究钢结构弹塑性变形可靠度的近似分析提供参考。 相似文献
10.
《应用力学学报》2020,(5)
建筑物内输液管道作为依附在各楼层的非结构构件,对保障建筑物正常使用具有重要意义。基于主体结构各楼层对管道的二次输入影响,分别分析了管道与建筑结构耦合和管道多点激励下的地震反应,通过比较两个模型的计算结果,研究管道地震反应的实用分析方法。通过对主体结构弹塑性时程分析,得到楼层加速度放大系数变化规律,并建立楼面反应谱分析楼层反应谱相对地面反应谱的放大效应以及楼层对管道的地震作用。利用多点激励分析方法分析了主体结构类型及管径对管道应力的影响,结果表明:地震作用下管道的最大应力发生在与楼层连接处,2层、3层为管道薄弱层;侧向刚度较大的框架-剪力墙结构中的管道应力值较框架结构管道应力偏小;管径为150mm的管道应力约为管径为25mm管道的6倍。 相似文献
11.
Yujie We 《Acta Mechanica Sinica》2014,(6):846-848
The construction and operation of high-speed rail(HSR)grid within the past two decades in China,in terms of the scale,may be possibly comparable to any national-wide construction in the history of China,even the Great Wall.By counting railways with commercial train service at the speed of200 km/h,China has the world’s longest HSR network with over 19 369.8 km of track in service today and this number 相似文献
13.
相对于有限元法,边界单元法在求解断裂问题上有着独特的优势,现有的边界单元法中主要有子区域法和双边界积分方程法.采用一种改进的双边界积分方程法求解二维、三维断裂问题的应力强度因子,对非裂纹边界采用传统的位移边界积分方程,只需对裂纹面中的一面采用面力边界积分方程,并以裂纹间断位移为未知量直接用于计算应力强度因子.采用一种高阶奇异积分的直接法计算面力边界积分方程中的超强奇异积分;对于裂纹尖端单元,提供了三种不同形式的间断位移插值函数,采用两点公式计算应力强度因子.给出了多个具体的算例,与现存的精确解或参考解对比,可得到高精度的计算结果. 相似文献
14.
2008年5月12日,汶川M80地震在四川省绵竹市清平乡文家沟内诱发一巨型滑坡。通过现场调查得知,滑坡前后缘高差455m,厚度20~30m,滑面为基岩层面,初始方量2750×107m3。滑体在运动中转化为碎屑流。滑坡-碎屑流总的水平运动距离为4022m,垂直运动距离为1443m,遗留的堆积物体积达5×107m3。滑坡距映秀—北川断裂仅36km,位于其下盘,地震烈度达XI度。滑坡导致文家沟中48人遇害,并形成一条完整的地震次生地质灾害链。初步分析表明滑坡启动速度快,滑坡向碎屑流转化过程明显、地点明确。碎屑流运动过程复杂,伴有强烈的“气垫效应”和“前缘气浪冲击效应”。作者认为,文家沟滑坡的高启动速度是长持时强烈地震动作用的结果,与山体的猛烈碰撞是导致滑体解体并转化为碎屑流的原因。 相似文献
2008年5月12日,汶川M80地震在四川省绵竹市清平乡文家沟内诱发一巨型滑坡。通过现场调查得知,滑坡前后缘高差455m,厚度20~30m,滑面为基岩层面,初始方量2750×107m3。滑体在运动中转化为碎屑流。滑坡-碎屑流总的水平运动距离为4022m,垂直运动距离为1443m,遗留的堆积物体积达5×107m3。滑坡距映秀—北川断裂仅36km,位于其下盘,地震烈度达XI度。滑坡导致文家沟中48人遇害,并形成一条完整的地震次生地质灾害链。初步分析表明滑坡启动速度快,滑坡向碎屑流转化过程明显、地点明确。碎屑流运动过程复杂,伴有强烈的“气垫效应”和“前缘气浪冲击效应”。作者认为,文家沟滑坡的高启动速度是长持时强烈地震动作用的结果,与山体的猛烈碰撞是导致滑体解体并转化为碎屑流的原因。 相似文献
15.
16.
17.
18.
Junfeng Li 《Acta Mechanica Sinica》2014,30(3):281-281
One of the core issues in modern celestial mechanics is the orbital dynamics in the near-regime gravitational field of as- teroids, which provides deep insights into the mathematical nature of a class of nonlinear systems, and plays as a critical basis for in situ explorations of different science goals. Lots of efforts have been made to reveal the characteristics of orbital motion in the vicinity of asteroids, and to improve the skills of asteroid research in methodology. 相似文献
19.
Maxime Sauzay 《Comptes Rendus Mecanique》2006,334(6):353-361
Experimental studies of the plasticity mechanisms of polycrystals are usually based on the Schmid factor distribution supposing crystalline elasticity isotropy. A numerical evaluation of the effect of crystalline elasticity anisotropy on the apparent Schmid factor distribution at the free surface of polycrystals is presented. Cubic elasticity is considered. Order II stresses (averaged on all grains with the same crystallographic orientation) as well as variations between averages computed on grains with the same crystallographic orientation but with different neighbour grains are computed. The Finite Element Method is used. Commonly studied metals presenting an increasing anisotropy degree are considered (aluminium, nickel, austenite, copper). Concerning order II stresses in strongly anisotropic metals, the apparent Schmid factor distribution is drifted towards small Schmid factor values (the maximum Schmid factor is equal to 0.43 instead of 0.5) and the slip activation order between characteristic orientations of the crystallographic standard triangle is modified. The computed square deviations of the stresses averaged on grains with the same crystallographic orientation but with different neighbour grains are a bit higher than the second order ones (inter-orientation scatter). Our numerical evaluations agree quantitatively with several observations and measures of the literature concerning stress and strain distribution in copper and austenite polycrystals submitted to low amplitude loadings. Hopefully, the given apparent Schmid factor distributions could help to better understand the observations of the plasticity mechanisms taking place at the free surface of polycrystals. To cite this article: M. Sauzay, C. R. Mecanique 334 (2006). 相似文献