共查询到20条相似文献,搜索用时 437 毫秒
1.
2.
介绍了电冰箱的多种振动和噪声测量试验,包括:振动频谱分析、模态分析、嗓声标准试验、噪声频谱分析和声强测量等.通过分析振动和噪声的试验结果,找出了产生噪声的主要部件和位置,并且提出了一些合理的改进措施.试验证明:改变压缩机壳体顶盖(主式压缩机)的刚度、阻尼参数和壳体在机箱上的固定方式,以及在压缩机附近采用吸声材料,都是改善电冰箱压缩机噪声的有效途径. 相似文献
3.
建立了一种纵横加肋圆柱壳有限元分析的正确的力学模型,通过大量数值计算,论证了纵骨尺寸,纵骨间距对壳体应力状态的影响,提出了一种等效各向同性壳的近似解析公式,为开展纵横加肋圆柱壳的结构设计打下了良好的基础。 相似文献
4.
壳体对爆炸空气冲击波强度的影响 总被引:3,自引:0,他引:3
壳体对爆炸空气冲击波强度有重要影响,本文提出一种计算壳体破片速度的新方法,分析了壳体对爆炸空气冲击波强度的影响。本文指出,壳体对爆炸空气冲击波强度的影响取决于产生壳体破片部位的壁厚(质量),而不是壳体的全部质量。这反映了实际情况,也是本文的特点所在。通过重量和形状相同的两种装药爆炸空气冲击波对模拟目标的毁伤实验,考查了本文理论分析结果的可靠性。理论分析与实验结果相吻合。本文得到弹体破片最大速度的上限和下限。破片速度与壳体厚度有关,壳体越厚或质量越大.对空气冲击波强度的影响越显著。 相似文献
5.
为了研究多源激励下水中有限长加肋圆柱壳体的声振特性,由Flügge壳体振动理论建立了单频多源激励下水中长度为2L 的有限长加环肋和纵肋壳体的声振耦合方程。将壳体结构位移、表面声压以及激励力展开为各阶模态与波形的组合形式,将肋骨作用表示为附加阻抗与各阶模态的叠加,导出了单频多源激励下加肋壳体振动和声辐射的解析表达式,并通过算例研究了肋骨、激励源相对位置对壳体声振特性的影响。计算结果表明:肋骨改变了壳体的共振特性,使共振频率处壳体的表面平均振速级降低,导致共振频率附近的辐射效率级增加3~5dB;将集中力转化为轴向分布的激振力可降低壳体的中高频处辐射声功率级,在频率f>500Hz频段,轴向距离为L/4时的幅值比单点激励低3~5dB;将集中力转化为周向分布的激振力可降低壳体的低中频处辐射声功率级,在f<150Hz频段,周向相距为π/2和π/3时的辐值比单点激励低7~9dB。本文研究结果可为水下结构的振动与噪声控制提供理论依据。 相似文献
6.
轮胎结构分析的一般壳体精化理论 总被引:2,自引:0,他引:2
基于一般壳体理论和Reddy型剪切精化理论,发展出适用于充气轮胎的结构非线性分析的一般壳体精化理论。为获得一个具有解析结构的近似解,将Bezier多项式用于分片描述轮胎几何形状和位移场,应用Rayleigh-Ritz法构造轮胎在充气内压作用下的内力,变形和层间应力的解,这一模型具有任意铺层性,复杂曲面逼近便捷和求解精度可控等优点。为比较起见,文中还对轮胎结构作了三维有限元数值分析。两种方法的综合比较表明,该文提出的轮胎模型不仅预测结果精确,而且大大节省计算量。 相似文献
7.
加肋圆柱壳的原理及应用卞学询,张锡治(天津轻工业学院,天津300222)(天津大学,天津300072)对加肋圆柱壳的分析,已有的理论不便于求解 ̄[1],以致象肋式烘缸 ̄[2]这样的加肋壳体设计缺乏理论指导,尺寸选取保守。本文以受托辊支托的肋式烘缸为背... 相似文献
8.
???? ?????? 《力学与实践》1994,16(3):52-52
加肋圆柱壳的原理及应用卞学询,张锡治(天津轻工业学院,天津300222)(天津大学,天津300072)对加肋圆柱壳的分析,已有的理论不便于求解 ̄[1],以致象肋式烘缸 ̄[2]这样的加肋壳体设计缺乏理论指导,尺寸选取保守。本文以受托辊支托的肋式烘缸为背... 相似文献
9.
在文献[1]中作者得到了具有刚性加强端的斜锥壳的渐近解法.本文在此基础上进一步讨论横向稀肋加固的斜锥壳的渐近解法.所谓“稀肋”是指相邻两肋的简单边界效应相互影响在工程精度范围内可忽略不计的肋条,例如肋间距l≥3(rh)~(1/2)时(2h——薄壳厚度,r——两肋处壳体的最大平均半径).对于本文所讨论的常用的肋条横截面尺寸,分析结果表明,作为应力状态的第一次渐近解[误差为(h/λ)~(1/2)量级,λ——壳体中心面的特征曲率半径],肋对壳体薄膜应力状态没有影响.而在求解简单边界效应时,可将肋与壳的连接处看成弹性固支边界来处理,即认为此处的壳体转角γ_1为零,而周向应变ε_2等于肋的应变值。在分析过程中,讨论了肋截面形心偏心及形心主轴偏斜等因素对壳体应力状态的影响,证明了在第一次近似时它们可忽略不计. 为了验证所得结果的精确程度,在文献[1]的试件上,进一步作了具有稀肋加强的斜锥壳的电测试验.试验结果证实,本文所得的渐近解的误差基本上在(h/λ)~(1/2)及斜锥偏度m~2的量级范围内. 为了节省篇幅,本文不再给出斜锥壳各基本应力状态的内力及位移表达式,以及它们的待定函数的确定方法,需要时可参阅文献[1]. 相似文献
10.
双层旋转壳流固耦合振动有限元分析 总被引:1,自引:0,他引:1
本文用旋转壳体元和流体元分析了双层旋转壳体流固耦合振动特性,基于Novozhilov壳体理论、水弹性理论以及Hamilton变分原理推导出耦合系统运行方程,计算结果与实测值比较表明本分析方法有较好的精度。 相似文献
11.
B. Rousselet 《基于设计的结构力学与机械力学》2013,41(3):353-358
This paper provides a new proof of design sensitivity of the static response of some typical structures. These structures (beams, plates, and plane elastic solids) have been described previously. A proof of design sensitivity of the inverse state operator was provided there, and design sensitivity of static response was derived. The proof presented here is simpler and self-contained. 相似文献
12.
随着大跨径桥梁结构在工程中应用日趋广泛,其施工控制问题也越来越受到工程界的重视。本文将计算结构力学方法引入桥梁结构的施工设计与控制,给出桥梁结构竣工后受力状态、施工各阶段理想状态的确定、施工控制方法及其程序系统的设计思想。 相似文献
13.
14.
本文通过实验对曲棍球击球技术进行了动力学分析.计算结果表明,击球动作的不确定性对其影响不大。文中使用的实验方法和计算公式适用于其它一些击球类运动. 相似文献
15.
Static, stability and dynamic analysis of gradient elastic flexural Kirchhoff plates 总被引:2,自引:0,他引:2
S. Papargyri-Beskou D. E. Beskos 《Archive of Applied Mechanics (Ingenieur Archiv)》2008,78(8):625-635
The governing equation of motion of gradient elastic flexural Kirchhoff plates, including the effect of in-plane constant
forces on bending, is explicitly derived. This is accomplished by appropriately combining the equations of flexural motion
in terms of moments, shear and in-plane forces, the moment–stress relations and the stress–strain equations of a simple strain
gradient elastic theory with just one constant (the internal length squared), in addition to the two classical elastic moduli.
The resulting partial differential equation in terms of the lateral deflection of the plate is of the sixth order instead
of the fourth, which is the case for the classical elastic case. Three boundary value problems dealing with static, stability
and dynamic analysis of a rectangular simply supported all-around gradient elastic flexural plate are solved analytically.
Non-classical boundary conditions, in additional to the classical ones, have to be utilized. An assessment of the effect of
the gradient coefficient on the static or dynamic response of the plate, its buckling load and natural frequencies is also
made by comparing the gradient type of solutions against the classical ones. 相似文献
16.
工程机械中的运动机构同时往往也是承载机构,其结构优化问题须同时考虑机构运动和结构受力,较传统的结构优化问题需要考虑的因素更多,约束条件更为复杂。本文以广泛应用于工程机械中的四连杆式俯仰机构为对象,研究了工程机械中机构-结构一体化优化问题,探讨了此类优化问题的目标函数、设计变量和约束条件,并对实际工程机械进行了分析和优化,达到了理想的效果。 相似文献
17.
J. Ruud van Ommen Srdjan Sasic John van der Schaaf Stefan Gheorghiu Filip Johnsson Marc-Olivier Coppens 《International Journal of Multiphase Flow》2011
This work reviews methods for time-series analysis for characterization of the dynamics of gas–solid fluidized beds from in-bed pressure measurements for different fluidization regimes. The paper covers analysis in time domain, frequency domain, and in state space. It is a follow-up and an update of a similar review paper written a decade ago. We use the same pressure time-series as used by Johnsson et al. (2000). The paper updates the previous review and includes additional methods for time-series analysis, which have been proposed to investigate dynamics of gas–solid fluidized beds. Results and underlying assumptions of the methods are discussed. 相似文献
18.
本文提出了一种后张法预应力光弹性实验方法与技术,并用该方法解决了三峡工程升船机的试验机-清江隔河岩水利枢纽第二级垂直升船机承重结构的楼板与深梁的预应力分析问题,实验结果已被工程单位所采用。 相似文献
19.
Adrian Bejan 《International Journal of Heat and Fluid Flow》1987,8(4):258-276
This review article places in perspective the new work devoted both to the analysis of the thermodynamic irreversibility of heat and mass transfer components and systems and to the design of these devices on the basis of entropy generation minimization. The review focuses on the fundamental mechanisms responsible for the generation of entropy in heat and fluid flow and on the design tradeoff of balancing the heat transfer irreversibility against the fluid flow irreversibility. Applications are selected from the fields of heat exchanger design, thermal energy storage, and mass exchanger design. This article provides a comprehensive, up-to-date review of second-daw analyses published in the heat and mass transfer literature during the last decade. 相似文献
20.
《International Journal of Solids and Structures》2014,51(7-8):1576-1586
In this study we compare three calculi listed in the title for analysis of structures involving uncertainty. The main idea is based on the consideration that the maximum structural response predicted by the preferred theory ought to be minimal, and the minimum structural response predicted by the preferred theory ought to be maximal, to constitute a lower overestimation. We present analytic results that allow one to calculate the structural response via the interval, ellipsoidal or super-ellipsoidal calculus. We provide several examples of truss structures and illustrate that in different situations, depending on the available data, one of these calculi ought to be preferred. Conclusion is made on the preferable approach to be the super-ellipsoidal calculus. 相似文献