Boundary layers in highly anisotropic plane elasticity

The boundary layer method proposed by Everstine and Pipkin for the analysis of highly anisotropic materials, such as fibre-reinforced materials, in elastic plane strain is developed and extended also to include plane stress. It is applied to problems of point forces acting on half-planes, and to two crack problems. The boundary layer solutions are compared with known exact solutions in anisotropic elasticity, and it is found that the boundary layer theory gives good results for elastic constants typical of a carbon fibre reinforced resin.     

Finite deformations of fibre-reinforced elastic solids with fibre bending stiffness

In the conventional theory of finite deformations of fibre-reinforced elastic solids it is assumed that the strain-energy is an isotropic invariant function of the deformation and a unit vector A that defines the fibre direction and is convected with the material. This leads to a constitutive equation that involves no natural length. To incorporate fibre bending stiffness into a continuum theory, we make the more general assumption that the strain-energy depends on deformation, fibre direction, and the gradients of the fibre direction in the deformed configuration. The resulting extended theory requires, in general, a non-symmetric stress and the couple-stress. The constitutive equations for stress and couple-stress are formulated in a general way, and specialized to the case in which dependence on the fibre direction gradients is restricted to dependence on their directional derivatives in the fibre direction. This is further specialized to the case of plane strain, and finite pure bending of a thick plate is solved as an example. We also formulate and develop the linearized theory in which the stress and couple-stress are linear functions of the first and second spacial derivatives of the displacement. In this case for the symmetric part of the stress we recover the standard equations of transversely isotropic linear elasticity, with five elastic moduli, and find that, in the most general case, a further seven moduli are required to characterize the couple-stress.     

The distributions of the interlaminar stress in a laminated shell with free end boundary

This paper studies the free edge effect yielded by interlaminar stress in a laminated cylindrical shell made up of fiber reinforced layer [0°], [90°] and the isotropic material layer under axisymmetric thermal load or radial pressure. Both ends of the shell are in free boundary condition. The exact solution of the problem can be obtained by using the three-dimensional theory of elasticity. For illustration, the numerical laminar stresses in a double-layer laminated shell under thermal load or radial pressure are calculated.     

Stroh formulation for a generally constrained and pre-stressed elastic material

The Stroh formalism is essentially a spatial Hamiltonian formulation and has been recognized to be a powerful tool for solving elasticity problems involving generally anisotropic elastic materials for which conventional methods developed for isotropic materials become intractable. In this paper we develop the Stroh/Hamiltonian formulation for a generally constrained and prestressed elastic material. We derive the corresponding integral representation for the surface-impedance tensor and explain how it can be used, together with a matrix Riccati equation, to calculate the surface-wave speed. The proposed algorithm can deal with any form of constraint, pre-stress, and direction of wave propagation. As an illustration, previously known results are reproduced for surface waves in a pre-stressed incompressible elastic material and an unstressed inextensible fibre-reinforced composite, and an additional example is included analyzing the effects of pre-stress upon surface waves in an inextensible material.     

Bending analysis of a ceramic-metal arched bridge using a mixed first-order theory

In this research, the bending analysis of an arched bridge is presented based on a mixed first-order thick beam one dimensional plate theory. The present arched bridge is considered as a beam with boundary conditions at its edges, which may be simply-supported, and between these two edges, the beam may have quadratic thickness variation. The bridge consists of two layers; the upper flat one is made from an isotropic homogeneous material such as ceramic, and the lower arched layer is made from an isotropic non-homogeneous functionally graded ceramic-metal material. The upper-surface of the arched layer, which represents the interface between the two layers, is ceramic-rich material while the lower-surface of the arched layer is metal-rich material. This structure eliminates interface problem of the arched bridge and thus the stress distributions are smooth. A closed form solution is developed for the static response of such bridge subjected to different distributed loads. The effects of many parameters on the displacements and stresses are investigated. The sample numerical examples presented herein for bending response of the present arched bridge should serve as references for future comparisons.     

Bifurcation conditions for ideal fibre-reinforced materials

A bifurcation of an equilibrium state for ideal fibre-reinforced material is discussed. It is assumed that the material is elastic, locally transversely isotropic, incompressible and inextensible in the direction of fibres. On a finite state of strain an arbitrary field of small displacements is superposed and a set of governing equations for the perturbed state is derived.As an example a stability problem of a rectangular block. Objected to a finite, homogeneous deformation is considered. A discussion of the results is focused on the influence on the stability of the pressure applied in the direction of fibres.Due to the assumption of inextensibility this pressure has no influence on the state of strain, but it is shown that it may cause a loss of stability.     

A Spectral Theory Formulation for Elastostatics by Means of Tensor Spherical Harmonics

Consider a set of (N+1)-phase concentric spherical ensemble consisting of a core region encased by a sequence of nested spherical layers. Each phase is spherically isotropic and is functionally graded (FG) in the radial direction. Determination of the elastic fields when the outermost spherical surface is subjected to a nonuniform loading and the constituent phases are subjected to some prescribed nonuniform body force and eigenstrain fields is of interest. When the outermost layer is an unbounded medium with zero eigenstrain and body force fields, then an N-phase multi-inhomogeneous inclusion problem is realized. Based on higher-order spherical harmonics, presenting a three-dimensional strain formulation with a robust form of compatibility equations, a spectral theory of elasticity in the spherical coordinate system is developed. Application of the established spectral theory leads to the exact closed-form solution when the elastic moduli of each phase vary as power-law functions of radius.     

A plane theory of inextensible transversely isotropic elastic composites

A plane strain or plane stress configuration of an inextensible transversely isotropic linear elastic material, with the axis of symmetry in the plane, leads to a harmonic lateral displacement field in stretched coordinates. Various displacement and traction conditions lead to standard and nonstandard boundary value problems of potential theory. Examples for a rectangular plane, half-plane and infinite plate with elliptic hole, are presented in illustration.     

Analytical solutions for plane problem of functionally graded magnetoelectric cantilever beam

In this paper, an exact analytical solution is presented for a transversely isotropic functionally graded magneto-electro-elastic (FGMEE) cantilever beam, which is subjected to a uniform load on its upper surface, as well as the concentrated force and moment at the free end. This solution can be applied for any form of gradient distribution. For the basic equations of plane problem, all the partial differential equations governing the stress field, electric, and magnetic potentials are derived. Then, the expressions of Airy stress, electric, and magnetic potential functions are assumed as quadratic polynomials of the longitudinal coordinate. Based on all the boundary conditions, the exact expressions of the three functions can be determined. As numerical examples, the material parameters are set as exponential and linear distributions in the thickness direction. The effects of the material parameters on the mechanical, electric, and magnetic fields of the cantilever beam are analyzed in detail.     

Dynamics of ideal fibre-reinforced rigid-plastic beams

A mechanism is proposed by which discontinuities in slope can propagate along an ideal fibr-ereinforced beam which is inextensible in the direction of its axis. The equations of motion of the beam are formulated, including the dynamical conditions which must be satisfied at the discontinuity. Constitutive equations for a rigid-plastic fibre-reinforced beam are established, and it is shown that slope discontinuities may propagate in a strain-hardening material, but are stationary in a perfectlyplastic beam. The theory is illustrated by its application to the problem of a beam moving in a direction normal to its axis brought to rest by striking a rigid stop at its mid-point. It is shown that in the subsequent motion slope discontinuities travel outwards from the centre of the beam. A complete explicit solution is obtained for the case of a beam with linear strain-hardening.     

Free axisymmetric vibration of FGM circular plates

Based on the three-dimensional theory, this work presents a direct displacement method to investigate the free axisymmetric vibration of transversely isotropic circular plates, whose material is functionally graded and properties obey the exponential law along the thickness direction of the plate. Under two boundary conditions, the solution satisfies all basic equations and the Corresponding boundary condition at every point. Thus, it is three-dimensional exact. Numerical examples are presented and compared with previous works. The present method can also be extended to the case of arbitrary distribution of the material properties along the thickness direction of the plate.     

Determination of boundary layers in the plane problem for three-layer strips. Part 2

In the first part of this paper, we considered the exact statement of the plane elasticity problem in displacements for strips made of various materials (problem A, an isotropic material; problem B, an orthotropic material with 2G ₁₂ < √E ₁ E ₂; problem C, an orthotropic material with 2G ₁₂ > √E ₁ E ₂). Further, we stated and solved the boundary layer problem (the problem on a solution decaying away from the boundary) for a sandwich strip of regular structure consisting of isotropic layers (problem AA). In the present paper, we use the solution of the plane problem to consider the problem for sandwich strips of regular structure with isotropic face layers and orthotropic filler (problem AB).     

Analytical solutions for bending and flexure of helically reinforced cylinders

There has been a great deal of interest in the problems of modelling cables and ropes. A recent review by Cardou and Jolicoeur [Appl. Mech. Rev. 50 (1997) 1] considers the modelling of a cable which consists of a central core surrounded by one or several helically wound wire layers. One approach has been to consider the deformations of an individual helical wire and to synthesise the model of a cable by using contact conditions between the various wires. Other authors have adopted a continuum approach regarding each layer as a transversely isotropic material whose principal direction is along a helix surrounding the central axis of the cable. In each layer the helix angle is constant so that, when referred to cylindrical polar co-ordinates, the cylinder has a constant stiffness matrix in each layer. The intention in this paper is to use the continuum approach and describe the analytical solutions that govern the simple bending, flexure, or bending under a uniform load, of an anisotropic elastic cylinder consisting of a single material of this type. The extension of this work to a composite cylinder consisting of several concentric layers, surrounding a central core, which are either bonded together or make a frictionless contact, is briefly described.     

瞬态波在层合板中传播的粘弹比拟法

本文发展了粘弹比拟理论,并将之用于求解半无限空间三层复合材料在垂直层合方向传播的瞬态波问题。对于层合板中应力波的传播问题,寻找到了一等效粘弹体,并用一种较好的Laplace变换的数值反演法求得了等效松弛函数和其它一些必要的辅助函数。用特征线法求得了等效粘弹体的应力和速度,进而得到了三层复合材料中心的应力、速度,进一步就得到了层中任意点的应力和速度。对于一个可由精确理论(射线理论)给出计算结果的问题,将粘弹比拟理论的结果和射线理论的结果进行了比较,结果表明,粘弹比拟理论对三层复合材料的瞬态波传播问题是相当成功的。     

夹层FGM圆柱壳在扭转载荷作用下的弹性稳定性

采用半解析方法研究了两端简支的功能梯度夹层圆柱壳在端部扭转载荷作用下的弹性稳定性.考虑圆柱壳的里外表层为均匀材料,中间层为材料性质沿厚度方向连续变化的功能梯度材料,并且在界面处的材料性质保持连续. 基于Flügge薄壳理论,建立了位移形式的结构静态屈曲控制方程.根据边界条件将位移表示为三角级数形式,获得包含柱壳端部扭转载荷参数的近似线性代数特征值问题,并通过数值方法求得了表征结构失稳特征的临界载荷. 数值结果表明,临界载荷随着半径与厚度比的增加而减小,随着功能梯度中间层的弹性模量的平均值的增加而增加.      

Determining the boundary layers in the plane problem for three-layer strips. Part 1

We propose an exact solution of the problem on a boundary layer (a stress-strain state decreasing away from the boundary) for three-layer strips (rods) whose layers are made of different materials. We use the asymptotic integration method to obtain boundary eigenfunctions and a characteristic equation for the parameter describing the boundary layer decay rate. We study how the middle layer material affects the boundary layer extent.     

Plane strain and generalized plane stress problems for fibre-reinforced materials

In this paper the basic equations governing the plane strain or generalized plane stress deformations of a linear elastic material reinforced by a single family of parallel inextensible fibres are deduced. It is found that a single system of equations will cover all cases. The solutions for plane, half-plane and strip problems are evaluated and compared with those for an ideal fibre-reinforced material.     

Load transfer in fibre-reinforced composites with viscoelastic matrix: an analytical study

In A fibre-reinforced 2D composite material with elastic fibres and viscoelastic, isotropic matrix is studied. Starting from the solution of a reference-problem with elastic matrix material the elastic matrix parameters are substituted by their viscoelastic correspondents in the Laplace domain. For simplification the time-dependent solution is approximated by using limiting value theorems that give information about the time-dependent solution for t → 0 and t → ∞. Then the method of asymptotically equivalent functions is used and illustrated with examples of a steel fibre in a PMMA matrix. The analytical solutions are compared with their numerical counterparts. In summary it can be stated that this paper is a further contribution to the vast literature about the application of the correspondence principle to the solution of special problems of the linear viscoelasticity.     

Exact Solutions for a Thick Elastic Plate with a Thin Elastic Surface Layer

A procedure has been developed in previous papers for constructing exact solutions of the equations of linear elasticity in a plate (not necessarily thin) of inhomogeneous isotropic linearly elastic material in which the elastic moduli depend in any specified manner on a coordinate normal to the plane of the plate. The essential idea is that any solution of the classical equations for a hypothetical thin plate or laminate (which are two-dimensional theories) generates, by straightforward substitutions, a solution of the three-dimensional elasticity equations for the inhomogeneous material. In this paper we consider a thick plate of isotropic elastic material with a thin surface layer of different isotropic elastic material. It is shown that the interface tractions and in-plane stress discontinuities are determined only by the initial two-dimensional solution, without recourse to the three-dimensional elasticity theory. Two illustrative examples are described.     

Axisymmetric bending of functionally graded circular magneto-electro-elastic plates

Axisymmetric bending of functionally graded circular magneto-electro-elastic plates of transversely isotropic materials is analyzed based on linear three-dimensional theory of elasticity coupled with magnetic and electric fields. The transverse loads are expanded in Fourier-Bessel series and therefore can be arbitrarily distributed along the radial direction. The radial distributions of the displacements are assumed in combination of Fourier-Bessel series and polynomials as well as the electric potential and magnetic potential. If the material properties obey the exponential law along the thickness of the plate, two three-dimensional exact solutions for two unusual boundary conditions can be derived since they satisfy the governing equations and specified boundary conditions point by point. For simply supported or clamped boundary, the obtained solutions satisfy the governing equations exactly and the boundary conditions approximately. A layer wise model is also introduced to treat with the plates whose material property components vary independently and arbitrarily along the thickness of the plates. The numerical results are finally tabulated and plotted to demonstrate the presented method and agree well with those from finite element methods.