受轴向冲击圆柱壳的塑性动力屈曲研究

令屈曲模态同时包含轴向坐标x和环向坐标 ,通过最优模态的分析 ,直接得到各向同性线性强化刚塑性圆柱壳受轴向冲击时发生轴对称屈曲或非轴对称屈曲时的临界速度 ,在此基础上讨论了临界速度与径厚比的关系。     

静力预加载环向加筋圆柱壳的轴向流-固冲击屈曲

将初缺陷放大准则应用于静力预加载环向加筋圆柱壳结构受轴向流-固冲击加载作用时的几何非线性动力屈曲研究中。运用Galerkin方法推导出壳体-肋骨系统的动力屈曲控制方程,并且采用Runge-Kutta法进行数值求解。着重分析了静力预加载荷对结构屈曲性态及抗轴向冲击能力的影响。     

金属圆柱壳受大质量低速冲击的屈曲变形

对钢质和铜质金属圆柱壳的轴向冲击动力响应进行了实验研究,记录了两种不同材料圆柱壳在大质量低速冲击下的冲击力时程曲线,得到其屈曲模态。采用高速摄像及模拟技术给出了钢质圆柱壳渐进屈曲的全过程,为理解钢质圆柱壳的屈曲机理提供了直观的结果。黄铜质圆柱壳在大质量低速冲击下, 出现整个壳面滿布屈曲波纹的塑性动力屈曲现象,说明高速冲击不是产生塑性动力屈曲的充要条件。像铜这样具有高密度的韧性材料,在大质量低速冲击下,会在轴向产生持续的压缩塑性流作用而出现塑性动力屈曲现象。     

圆柱壳的非线性动力屈曲分析

本文研究在轴向冲击作用下，具有初始几何缺陷的圆柱壳的非线性弹性动力屈曲问题。由于冲击过程中作用时间极短，应力波的影响变得相当重要，同时认为圆柱壳经历大挠度变形。分析中不仅考虑圆柱壳的径向惯性力，而且也考虑轴向惯性力和几何非线性的影响。假设圆柱壳中位移和薄膜力可分成轴对称分量和非轴对称分量之和，并引入应力函数表示非轴对称内力，对平衡方程应用伽辽金方法，将导出的和冲击物体的质量对动屈曲性能的影响很大。     

黏弹性层合圆柱壳的蠕变分岔屈曲

采用Boltzmann积分型本构关系描述铺设单层的黏弹性力学行为,基于DMV扁壳假定和Kármán- Donnell几何非线性关系,研究了对称铺设黏弹性层合圆柱壳的前屈曲变形特征和分岔蠕变屈曲．对玻璃纤维/环氧树脂基复合材料层合圆柱壳的分析结果表明,在前屈曲阶段,挠曲变形和环向薄膜力随时间的变化趋势主要取决于圆柱壳的铺设方式,可以呈现完全相反的变化特征；层合短圆柱壳两端的边界条件对其蠕变分岔屈曲行为有决定性的影响,径厚比的增加将使分岔形式的延迟失稳现象更加明显．     

圆柱形薄壳冲击扭转屈曲的实验研究

本文对受冲击扭矩作用下的圆柱形簿壳扭转屈曲进行了实验研究，利用Ｈｏｐｋｉｎｓｏｎ扭杆使圆柱受阶跃扭矩作用，分析所得到的应变－时间曲线，得到了不同几何参数的圆柱壳的冲击临界扭矩Ｍｄｅｒ和屈曲波数ｎ及几条定性结论，同时找出了圆柱壳静力扭转屈曲行为和冲击扭转屈曲行为之间的异同。     

轴向冲击圆柱壳非弹性响应

简要论述承受轴向冲击载荷圆柱壳非弹性动屈曲响应的研究进展。采用Ｋａｒｍａｎ－Ｄｏｎｎｅｌｌ运动方程研究轴向流固冲击载荷作用下的圆柱壳轴对称弹塑性动屈曲问题。本构关系采用增量理论，借助增量数值方法求解动力方程组。研究不同边界条件对屈曲的影响，以及径向外压力在不同边界条件下对屈曲的影响。     

圆柱薄壳的动相变屈曲行为

利用MTS809材料试验机对TiNi圆柱薄壳进行了轴向动渐进相变屈曲实验,对轴向冲击下处于伪弹性状态的TiNi合金柱壳的动相变屈曲行为进行了数值模拟研究。结果表明,不同的加载强度将会激发出柱壳不同的动屈曲响应模态。当冲击速度较高时,柱壳两端首先形成轴对称环形相变屈曲波纹,并产生应力平台;随着马氏体含量不断增加,环形相变屈曲波纹逐渐贯穿整个壳体,名义应力缓慢抬升;当名义应变超过一定阈值时,对称环形屈曲模态突变为非轴对称块状屈曲模态,名义应力大幅下降。撞击速度为40 m/s的算例（含10％随机缺陷）与S.Nemat-Nasser等的实验结果很好吻合,说明本文中计算模型、方法和结果的有效性经过了实验的考核。结果还表明,相变耗能是TiNi柱壳吸收冲击能量的主要机制,适合制作可重复使用的高效吸能元件,并给出了相应的理想厚径比。     

轴向应力波作用下圆柱壳塑性轴对称动力屈曲

运用有限元特征值分析方法对应力波作用下圆柱壳塑性轴对称动力失稳问题进行了研究。基于应力波理论和相邻平衡准则导出了圆柱壳轴对称动力失稳时的特征方程,在分析中同时考虑了应力波效应及横向惯性效应,把圆柱壳塑性动力失稳问题归结为特征值问题。通过引入圆柱壳动力失稳时的波前约束条件实现了此类问题的有限元特征值解法。计算结果揭示了圆柱壳塑性轴对称动力屈曲变形发展的机理,以及轴向应力波和屈曲变形的相互作用规律。     

充液圆柱壳轴向冲击屈曲的实验研究与计算机数值模拟

借助落锤装置实现冲击加载,完成了一组充满水的金属薄壁圆柱壳试件轴向冲击屈曲过程的实验研究,同时利用LS－DYNA大型动力软件对冲击屈曲的全过程进行了计算机模拟,对于屈曲模态发展过程以及冲击力和液压的动态时程曲线,实验观察和数值结果均表现出较好的一致性,研究表明,在撞击过程中壳内形成很大的液体压力,在此内压和轴向压缩的联合作用下,壳壁发生轴对称塑性屈曲,屈曲模态为一系列依次发展的环带波纹。     

两参数轴向冲击载荷作用下圆柱壳弹塑性动力屈曲

研究圆柱壳在两参数轴向冲击载荷下的弹塑性动力屈曲问题，基本控制方程由弹塑性连续介质中关于加速度的最小原理获得，本构关系采用增量理论。研究表明：屈曲过程可划分为两相，两相之间由临界时间ｔ表征，并分别讨论了应力波对屈曲的影响，压缩波与弯曲波的相互作用及几何尺寸，材料参数，初始缺陷，载荷峰值及持续时间等诸多因素与动力屈曲的关系。     

DYNAMIC BUCKLING OF STATICALLY PRELOADED RING-STIFFENED CYLINDRICAL SHELLS UNDER AXIAL FLUID-SOLID IMPACT LOADING

The Initial Imperfection Amplified Criterion is applied to investigate the geometric nonlinear dynamic buckling of statically preloaded ring-stiffened cylindrical shells under axial fluid-solid impact. Taking account of the effects of large deformation and initial geometric imperfection, the governing equations are obtained by the Galerkin method and solved by the Runge-Kutta method. The effects of static preloading (uniform external radial pressure) on the buckling features and the load-carrying ability of ring-stiffened cylindrical shells against axial impact are discussed. The project is supported by the National Natural Sciences Foundation of China (No. 19802017).     

Nonlinear buckling and postbuckling of heated functionally graded cylindrical shells under combined axial compression and radial pressure

The nonlinear large deflection theory of cylindrical shells is extended to discuss nonlinear buckling and postbuckling behaviors of functionally graded (FG) cylindrical shells which are synchronously subjected to axial compression and lateral loads. In this analysis, the non-linear strain-displacement relations of large deformation and the Ritz energy method are used. The material properties of the shells vary smoothly through the shell thickness according to a power law distribution of the volume fraction of the constituent materials. Meanwhile, by taking the temperature-dependent material properties into account, various effects of external thermal environment are also investigated. The non-linear critical condition is found by defining the possible lowest point of external force. Numerical results show various effects of the inhomogeneous parameter, dimensional parameters and external thermal environments on non-linear buckling behaviors of combine-loaded FG cylindrical shells. In addition, the postbuckling equilibrium paths are also plotted for axially loaded pre-pressured FG cylindrical shells and there is an interesting mode jump exhibited.     

轴向瞬间阶梯载荷下圆柱壳动力屈曲的双特征参数分析

对于轴向瞬间阶梯载荷下圆柱壳的弹性非轴对称动力屈曲问题，将临界应力和屈曲惯性项指数参数作为双特征参数求解。由能量转换和守恒准则，导出压缩波阵面上的屈曲变形附加约束条件。失稳控制方程、边界条件和波阵面上的连续条件，连同此附加约束条件构成求解两个特征参数和动力失稳模态的完备定解条件。由伽辽金法得出求解双特征参数问题的数值方法。     

Studies on the torsional buckling of elastic cylindrical shells

The experimental phenomenon and theoretical analysis are given for the torsional buckling of elastic cylindrical shells. From the experiment, it is found that the postbuckling deformation doesn't occupy the whole length when the shell is longer. In the theoretical calculation, only the normal displacement boundary condition is taken into account. By comparing the present calculation results with the accurate result of Yamakis theory and the results of the present experiment, it is shown that the influence of the axial and circumference boundary condition is less important.     

Creep buckling of axially compressed circular cylindrical shells of a zirconium alloy: Experiment and computer simulation

Experiments were performed to study the deformation and buckling of axially compressed circular cylindrical shells of Zr2.5Nb zirconium alloy under creep conditions. Computer simulation using the MSC.Marc 2012 software was conducted by step-by-step integration of the equations of quasistatic deformation of thin shells using Norton’s law of steady creep. The results of the experiment and computer simulation show that the buckling modes are a combination of axisymmetric bulges located near one end or both ends of the shell and axisymmetric buckling modes with the formation of three or four waves in the circumferential direction. A comparison is made of the time dependences of the axial strain of the shells obtained in the experiment and by computer simulation. It is shown that for large axial compressive stresses, these dependences are in satisfactory agreement. For lower values of these stresses, the difference between the theoretical and experimental dependences is greater.     

充满水的金属圆柱壳经受轴向撞击时屈曲过程的实验研究

本文报道了五种规格充满水的圆柱壳经受大质量低速度轴向撞击作用时屈曲过程的实验结果。研究表明由于液体的存在，圆柱壳的屈曲模态呈轴对称型的环带波纹，整个撞击过程可以明显地分为振荡的动力加载、平稳发展的后屈曲和迅速下降的弹性卸载三个阶段。并讨论了试件壁厚和高度等几何参数对其屈曲性能的影响。     

黏弹性层合圆柱壳的临界轴压分析

基于经典屈曲理论，研究了轴向受压黏弹性复合材料层合圆柱壳的临界屈曲载荷. 利用Boltzmann线性积分型本构关系描述铺设单层的各向异性黏弹性行为. 结合解析与数值 方法，由Donnell型屈曲控制方程以及边界条件的Laplace变换导出相空间的特征方程，根 据Laplace逆变换的极值定理，获得层合圆柱壳的瞬时弹性临界载荷与持久临界载荷. 针对 多组铺设方式，通过数值算例重点分析了临界载荷随铺设角的变化特征，两种临界载荷的峰 值点差异程度与铺设方式、几何参数以及材料类型的关系，得到了一些对黏弹性层合圆柱壳 的优化设计有参考价值的结论.