Three-dimensional structure optimal design for extending fatigue life by using biological algorithm

This paper presents some applications of a new structural shape optimization procedure for maximizing fatigue life or inspection intervals for damage tolerant structures. In this approach, a new and simple method, which we termed FAST (Failure Analysis of Structures), for estimating the stress intensity factor for cracks at a notch, as well as an extension of the biological algorithm was employed to study the problem of optimization with fatigue life as the design objective. Research by the authors has demonstrated that the optimum shape for minimizing stress is not necessarily the optimum shape for static strength or fatigue life of a damage tolerant structure. The examples are presented that highlight this difference. The optimal shapes for stress are compared with optimized shapes found for static strength with different crack lengths. These are also compared with optimized shapes found for maximum fatigue life. The choice of initial crack size was found to have a significant effect on the optimal shapes for the structures presented.     

Fatigue based three-dimensional structural design optimisation studies implementing the generalised Frost–Dugdale crack growth law

Experimental studies of fatigue crack growth in aluminium alloys have shown that, at the low-to-mid stress intensity factor range, there is often a log-linear relationship between the crack length and the fatigue life. These observations have led to the development of the generalised Frost–Dugdale crack growth law, which allowed the accurate prediction of fatigue crack growth from Region I. For this research paper the ‘generalised Frost–Dugdale’ law was used to perform an optimisation study of 7050-T7451 Aluminium structures. The structural optimisation procedure proposed integrates geometrical modelling, structural analysis and optimization into one complete and automated computer-aided design process. The results from the structural optimisation study compared the ‘generalised Frost–Dugdale’ law and the traditional Paris law. Gradient-less, gradient-based optimisation algorithm and an enumeration scheme were considered in this investigation. The enumeration scheme takes advantage of a cluster computer architecture which enables a visualisation of the solution space allowing verification and validation of the optimisation algorithm. The results indicated that the optimal geometrical shape and predicted fatigue life depended on the crack sizes, structural geometry, boundary conditions and fatigue crack growth law. As a result, this procedure illustrates that for the design of light weight structures, a fatigue based optimisation used in conjunction with visualisation of the solution space may provide a viable design methodology. The importance of non-destructive inspection (NDI) and its role in determining optimal structural geometries is also revealed. Furthermore, the possibility of the application of the generalised Frost–Dugdale model in design optimisation has been demonstrated. This procedure has the potential to be applied to structures with complex structural configurations taking into account crack propagation in Region I.     

含缺口试件疲劳全寿命预测一种建议的方法

传统的研究含缺口构件的疲劳的方法是将疲劳启裂和疲劳裂纹扩展两个过程完全独立起来,用不同的方法来模拟,相互间并没有定量的关系。本文是基于最新发展的多轴疲劳损伤理论,建立了一种适用于各种载荷条件下的疲劳启裂和裂纹扩展的普适方法。根据从弹塑性分析中得到的应力应变,确定疲劳损伤模型,建立能够预测疲劳启裂、裂纹扩展速率和扩展方向的新方法。整个模拟可以分为两步:弹-塑性应力分析得到材料的应力应变分布;再运用一个通用的疲劳准则预测疲劳裂纹启裂和裂纹扩展。通过对1070号钢含缺口试件的疲劳全寿命预测,得到了与实验非常吻合的模拟结果。     

Accumulative damage near crack tip for welded bridge members: fatigue life determination

The behavior of crack growth for the fatigue damage accumulation near tip where damage is most severe is analyzed. Fatigue life is assessed for the welded members of bridges under traffic loading. Two parts are considered. They consist of the development of a fatigue damage accumulation model for welded bridge members and a method for calculating the stress intensity factor that is needed for evaluating the fatigue life of welded bridge members with cracks. Based on the concept of continuum damage accumulation and fatigue and fatigue crack growth relations, results are obtained to describe the relationship between the cracking count rate and the effective stress intensity factor. Crack growth and fatigue life are found for two types of welded members assisted by using fatigue experimental results. The stress intensity factors are modified by correcting for the geometric shape of the welded members in order to reflect the influence of the weldment and geometry. This is accomplished via the stress intensity factor. The calculated and measured fatigue lives were generally in good agreement for the initial cracking conditions of two types of welded members widely used in steel bridges.     

Development of a multiaxial fatigue theory by considering constraint effects on small mixed-mode cracks

The effects of the transverse strain (the normal strain in the crack-line direction) on the near-tip fields of small shallow surface cracks (Case A cracks) in power-law hardening materials are investigated by finite element analyses. The small Case A cracks are under plane stress, general yielding, and mixed mode I and II conditions. Constant effective stress contours representing the intense straining zones near the tip, deformed crack-tip profiles and near-tip mode mixity factors are presented for different transverse strains in the crack-line direction. Based on the concept of characterization of fatigue crack growth by the cyclic J-integral, the effects of the transverse strain on J are investigated. The results suggest that the fatigue life prediction based on multiaxial fatigue theories and the critical plane approach should include the constraint effects due to the transverse strain. Consequently, the concept of constant fatigue life contour on the Γ-plane in multiaxial fatigue theories is generalized to the constant fatigue life surface in the Γ-space where the shear strain and the two normal strains are the three axes. Finally, a damage parameter as a function of the shear strain and the two normal strains is proposed for evaluation of fatigue damage under multiaxial loading conditions.     

Fatigue growth prediction of elliptical cracks in welded joint structure: Hybrid and energy density approach

A hybrid weight function approach (HWFM) is presented for the fatigue life prediction of infinite body and welded joint structure containing elliptical cracks. A self-containing computer code has been developed for this purpose. Numerical computations were first conducted on cracked infinite body showing a physical fact, that the elliptical shape of the crack becomes circular during its evolution. The prediction of the fatigue crack growth shows that the present results are in perfect concordance with those reported in the literature. Then, numerical tests were carried out on two types of specimens of welded joint structure. The present results were compared to the experimental and predicted ones of other authors, demonstrating that the hybridization method is a powerful numerical technique, and that the SEDF approach (using the Sih’s law) is more valid for the critical cases of welded joints than the SIF approach (using the Paris law). A parametric study has been conducted on the stress ratio “R” showing that the fatigue life to failure decreases with the increase of “R”.     

核电690合金传热管微动疲劳试验及损伤机理分析

核电蒸汽发生器传热管在微幅磨损与交变载荷的作用下形成微动疲劳,导致其表面裂纹萌生和扩展乃至破裂,从而影响反应堆的安全. 为研究径向载荷以及轴向交变应力对690合金管微动疲劳寿命的影响规律,开展690合金管管材的微动疲劳试验,获得690合金管管材的微动疲劳寿命曲线,并与相关研究数据进行对比分析,以便探讨材料在微动疲劳下的寿命模型. 对不同载荷下的690合金管试样的磨痕表面进行三维形貌和扫描电镜观测,分析磨损表面的损伤机理;对不同载荷下的690合金管试样断口的宏观与微观形貌进行表征,分析裂纹萌生、起裂过程及其失效机理. 结果表明690合金管与403不锈钢(SS)抗振条间的磨损机理为剥层及磨粒磨损;690合金管在径向载荷作用下于微动磨损处产生裂纹源,裂纹在轴向交变应力的作用下不断向内部扩展,最终导致断裂;其断裂形式为解理疲劳断裂.      

STUDY ON THE SURFACE CRACK GROWTH BEHAVIOR IN 14MnNbq BRIDGE STEEL

Three-dimensional crack closure correction methods are investigated in this paper.The fatigue crack growth tests of surface cracks in 14MnNbq steel for bridge plate subjected to tensile and bending loadings are systematically conducted.The experimentally measured fatigue crack growth rates of surface cracks are compared with those of through-thickness cracks in detail.It is found that the crack growth rates of surface cracks are lower than those of through-thickness cracks.In order to correct their differences in fatigue crack growth rates, a dimensionless crack closure correction model is proposed.Although this correction model is determined only by the experimental data of surface cracks under tensile loading with a constant ratio R=0.05, it can correlate the surface crack growth rates with reasonable accuracy under tensile and bending loadings with various stress ratios ranging from 0 to 0.5.Furthermore, predictions of fatigue life and crack aspect ratio for surface cracks are discussed, and the predicted results are also compared with those obtained from other prediction approaches.Comparison results show that the proposed crack closure correction model gives better prediction of fatigue life than other models.     

拉压循环载荷下正交异性钢桥面板肋-面板焊缝裂纹扩展分析

采用四步法计算了考虑循环载荷中压应力影响的正交异性钢桥面板的肋-面板焊缝表面裂纹扩展。第一步是基于正交异性钢桥面板的疲劳分析模型,计算肋-面板焊缝处的应力,第二步是通过肋-面板焊缝的三维局部模型,用Schwartz-Neumann交替法计算焊缝表面裂纹的应力强度因子分布,第三步是用二维断裂力学模型和增量塑性损伤模型,计算循环载荷中的压应力对裂纹扩展的影响,第四步是用第二步中的三维裂纹分析结果和第三步中的二维断裂力学模型得到的裂纹扩展公式,计算钢桥面板的肋-面板焊缝表面裂纹扩展。计算结果表明,对应于正交异性钢桥面板肋-面板焊缝处的循环应力,本文所用模型的裂纹尖端反向塑性区导致裂纹扩展率增加50%以上。研究结果为正交异性钢桥面板肋-面板焊缝裂纹的疲劳寿命分析提供了研究基础。     

焊接金属疲劳裂纹萌生寿命估算方法的研究

疲劳裂纹萌生阶段在整个疲劳破坏过程中占有极为重要的地位，而萌生阶段的裂纹体损伤规律用长裂纹断裂力学方法是无法确定的．以萌生阶段中塑性滞回能作为控制参量，根据实验数据拟合出疲劳损伤的连续曲线，得到裂纹萌生寿命估算公式．