多功能SHPB装置及水泥石材料的动态性能研究

为了研究在一定温度和压力下的水泥石的动态力学性能，研制了多功能ＳＨＰＢ材料动态性能测试装置，该装置可分别进行材料的拉伸，压缩，扭转性能测试，拉，压试验可以在带围压和温度的三向应力状态下进行，文中还对水泥石改性材料的动态力学性能进行了实验研究。     

SHPB装置应用于测量高温动态力学性能的研究

ＳＨＰＢ（分离式Ｈｏｐｋｉｎｓｏｎ压杆）装置由于具有结构简单、操作方便等优点，为人们普遍采用；但作测量材料的动态高温力学性能方面还存在诸多不便之处。本文研究了附有恒温加热炉的ＳＨＰＢ装置，利用一维应力波传播理论和传热学原理，修正了温度梯度场对波形测量的影响，从而使ＳＨＰＢ装置用于高温动态力学测量更为准确可靠；并实际测量了３０ＣｒＭｎＳｉＡ钢从室温到高温（６００℃）的动态（１．５～４．０×１０３ｓ－１）应力应变曲线。     

可变形多孔介质渗透系数的测定方法

在Ｂｉｏｔ理论基础上给出可变形多孔介质耦合渗流基本方程；求出小试件一维定常耦合渗流问题的解答；表明在一维流固耦合情况下试件内部压力梯度有明显的非均匀性。因此通过实验确定可变形多孔介质渗透系数在数学上可归结为微分方程的反问题，传统的测试渗透系数的方法需要改进。介绍了可变形多孔介质渗透系数的测试原理和测试方法。对粒状多孔材料实验的结果表明，传统实验方法得到的渗透系数误差较大。     

PVDF压电计在低阻抗介质动态力学性能测试中的应用

介绍了ＰＶＤＦ的压电特性,讨论了用ＰＶＤＦ测试材料动态应力应变曲线的实验方法和数据处理方法,并以聚氨酯泡沫塑料为例,说明了它在对低阻抗介质的动态测试中避开了常规Ｈｏｐ ｋｉｎｓｏｎ压杆方法的难处且实验结果具有更高的精确度。     

SHPB 实验数据处理的解耦方法

分析了ＳＨＰＢ试验中导致试件早期应力不均匀性的主要因素，指出试件中应力波的波速是与试件材料的应力应变曲线耦合在一起的，提出了考虑应力不均匀性的解耦方法，这种解耦方法具有普遍性，可广泛用于ＳＨＰＢ实验数据处理。     

聚氨酯泡沫塑料在应力波加载下的压缩力学性能研究

通过ＳＨＰＢ冲击实验装置研究了硬质聚氨酯泡沫塑料在应力波加载下的动态力学性能，得到了泡沫塑料在较高应变率下的应力－应变曲线；确定了泡沫塑料的动态屈服强度和动态弹性模量等力学参数，并同落锤冲击实验及准静态压缩实验的结果进行了比较。     

硬质聚氨酯泡沫塑料的SHPB实验研究

本文对四种不同密度的硬质聚氨酯泡沫塑料（ＲＰＵＦ）的静态及动态力学性能进行了研究，并对分离式Ｈｏｐｋｉｎｓｏｎ压杆（ＳＨＰＢ）实验中ＲＰＵＦ试样的长径比进行了讨论。静态实验的结果说明了ＲＰＵＦ的弹性模量及屈服应力都随密度增加而增大，并且随密度增加，材料的屈服平台逐渐消失。ＳＨＰＢ实验结果表明ＲＰＵＦ对变形应变率有一定的敏感性且其敏感性随密度增加而稍有降低     

弹性直杆动态屈曲与后屈曲的实验研究

对传统的霍普金森压杆装置（ＳＨＰＢ）进行改进，用于研究弹性直杆的动态屈曲与后屈曲，并且分析了影响实验精度的因素。实验结果表明，在轴向应力波作用下弹性直杆的动态屈曲临界载荷明显高于静态的，并且在屈曲发生后，在直杆中有弯曲波产生，其波速大约为弹性剪切波的波速。     

柱壳在轴向冲击载荷作用下动态塑性屈曲的实验研究

圆柱壳的动态塑性屈曲问题的研究主要是集中在屈曲模态方面，至于屈曲的临介载荷与临介时时间则研究的较少，ＳＨＰＢ用于研究材料在高应变率下动态力学性能已为大家所熟悉，但用于研究结构的动态屈曲则未见报道，本文利用一装置对柱壳的动态塑性屈曲进行了实验研究，测出了壳体屈曲过程的载荷，轴向缩短量与时间的关系曲线，得到屈曲时的临介载荷与临介时间，同时发现壳体屈曲变形的一些规律并与静态实验的结果进行了比较，为理论分     

两相介质中波在平面界面上的反射

借助Ｂｉｏｔ多孔介质中的波动方程，根据各种界面条件导出了波在两相介质各种界面上反射的一般计算公式。作为例子，数值计算了Ｐ１波入射于几种典型界面时，Ｐ１、Ｐ２和Ｓ波的反射系数与频率、入射角之间的关系。结果表明：各种波的反射系数与入射角、频率有关系，若把多孔介质当作单相均一固体处理，将会得到显著不同的结果。     

Preface: Current research progress on mechanics of high speed rail

The construction and operation of high-speed rail（HSR）grid within the past two decades in China,in terms of the scale,may be possibly comparable to any national-wide construction in the history of China,even the Great Wall.By counting railways with commercial train service at the speed of200 km/h,China has the world’s longest HSR network with over 19 369.8 km of track in service today and this number     

ACTA MECHANICA SINICA 2014 ANNUAL SUBJECT INDEX

正~~     

人造地震动合成中的位移误差分析

三角函数级数法是合成人工地震动常用算法之一,但是通过对加速度积分求取位移时,却存在与零线漂移相类似的位移漂移现象。     

Hermitian space-time finite elements for estuarine mass transport

Space-time finite element solutions of the convection–dispersion equation using higher-order nodal continuity and Hermitian polynomial shape functions are described. Five separate elements ranging from a complete linear element with C^0,0 nodal continuity to a complete first-order Hermitian element with C^1,1 nodal continuity are subjected to detailed analysis. Wave deformation analyses identify the source of leading or trailing edge oscillations, trailing edge oscillations being the major source of difficulty. These observations are confirmed by numerical experiments which further demonstrate the potential of higher-order nodal continuity. The performance of the complete first-order Hermitian element is quite satisfactory and measurably superior to the linear element.     

Rainwater rivulets on a cable subject to windFilets d'eau de pluie sur un câble soumis au vent

Rainwater rivulets appear on inclined cables of cable-stayed bridges when wind and rain occur simultaneously. In a restricted range of parameters this is known to cause vibrations of high amplitudes on the cable. The mechanism underlying this effect is still under debate but the role of rainwater rivulets is certain. We use a standard lubrication model to analyse the dynamics of a water film on a cylinder under the effect of gravity and wind load. A simple criterion is then proposed for the appearance and position of rivulets, where the Froude number is the control parameter. Experiments with several geometries of cylinder covered with water in a wind tunnel show the evolution of the rivulets with the Froude number. Comparison of the prediction by the model with these experimental data shows that the main mechanism of rivulet formation and positioning is captured. To cite this article: C. Lemaitre et al., C. R. Mecanique 334 (2006).     

Cristallisation par onde acoustique : le cas de l'héliumCrystallization by acoustic waves: the case of helium

We establish a theoretical model to explain the nucleation of a crystal of helium by an acoustic over-pressure. We explain the interfacial laws for this ultra-fast cristallization, close to the sound speed. Assuming spherical symmetry and taking into account the experimental data, we recover the dynamics of the growth and melting during an over-pressure impulse. To cite this article: M. Ben Amar et al., C. R. Mecanique 331 (2003).     

Structure initiale et propriétés de liquéfaction statique d'un sableInitial structure and static liquefaction properties of sand.

Based on the use of two different preparation procedures for reconstituting triaxial samples of sand, i.e. wet tamping and dry pluviation, significant differences in associated mechanical behaviour are observed on a reference sand with respect to the phenomenon of ‘static’ liquefaction. Wet tamping favours the initiation of liquefaction instability, whereas dry pluviation favours a more stable behaviour, less susceptible to liquefaction. Microscopic observation of corresponding sand specimens allows us to identify two well differentiated structures, i.e., for wet tamping, an irregular structure with predominance of aggregates (aggregated grains) and macropores, very contractant and unstable and, for dry pluviation, a more regular structure, without macropores, more dilatant and more stable. These observations show the importance of further characterization, based on the introduction of appropriate parameters, of the initial structure of sandy materials, strongly dependant upon their mode of formation (natural or artificial). To cite this article: N. Benahmed et al., C. R. Mecanique 332 (2004).     

Sources of Complexity in Human Systems

Complex is a special attribute we can give to many kinds of systems. Although it is used often as a synonym of difficult, it has a specific epistemological meaning, which is going to be shared by the incoming science of complexity. Difficult is an object which, by means of an adequate computational power, can be deterministically or stochastically predictable. On the contrary complex is an object which can not be predictable because of logical impossibility or because its predictability would require a computational power far beyond any physical feasibility, now and forever. For complexity refers to some observing system, it is always subjective, and thus it is defined as observed irreducible complexity. Human systems are affected by several sources of complexity, belonging to three classes, in order of descending restrictivity. Systems belonging to the first class are not predictable at all, those belonging to the second class are predictable only through an infinite computational capacity, and those belonging to the third class are predictable only through a trans-computational capacity. The first class has two sources of complexity: logical complexity, directly deriving from self-reference and Gödel's incompleteness theorems, and relational complexity, resulting in a sort of indeterminacy principle occurring in social systems. The second class has three sources of complexity: gnosiological complexity, which consists of the variety of possible perceptions; semiotic complexity, which represents the infinite possible interpretations of signs and facts; and chaotic complexity, which characterizes phenomena of nonlinear dynamic systems. The third class coincides with computational complexity, which basically coincides with the mathematical concept of intractability. Artificial, natural, biological and human systems are characterized by the influence of different sources of complexity, and the latter appear to be the most complex.