拱暨索拱面内稳定性研究的传递矩阵法

为探究拱桥面内稳定问题求解的新途径,应用传递矩阵法对径向均布荷载作用下的圆拱面内屈曲微分方程进行解答,利用边界条件导出其特征方程,从而求得其屈曲荷载。同时,结合力法以及拱上荷载集度与轴力的关系,将该理论方法推广到承受集中荷载的变截面拱以及索拱组合结构的稳定分析中,并和有限元ANSYS计算结果进行对比,验证了本文理论和方法的正确性。最后,研究了不同荷载工况下的边界条件、圆心角和截面惯性矩对拱结构面内稳定性的影响。结果表明,索拱结构的面内稳定性优于纯拱结构。     

设置反拱加固的拱结构力学性能研究

提出了一种设置反拱结构的拱桥加固方法,该方法是通过在主拱圈拱肋下方设置反拱,在反拱和拱肋之间用竖杆相连,并通过抗弯预埋件和抗剪锚栓把反拱的拱脚和拱肋连接,使反拱结构和原主拱圈共同形成结构受力体系。本文基于有限元参数分析方法,通过设置6个不同参数:拱的矢高f1、拱的拱轴系数m1、反拱的矢高f2、反拱的拱轴系数m2、反拱与待加固拱的等效半径比i、反拱纵向长度与待加固拱的总跨径的比值Kr,以考虑不同拱桥、反拱结构参数对原拱桥关键截面内力、跨中挠度及整体屈曲系数的影响。基于大量计算数据的参数拟合,分别获得跨中弯矩、跨中挠度、拱脚弯矩、拱脚推力、整体屈曲系数的拟合表达式。通过对拟合数据的分析,获得了反拱加固的拱桥结构力学特性的相关变化规律。最后对一个100m跨径拱桥进行加固计算分析,结果表明:本文提出的加固方法不但可以显著提高待加固桥梁的整体刚度与稳定性,而且可有效地降低主拱关键截面的内力。     

Nonlinear dynamic buckling of pinned–fixed shallow arches under a sudden central concentrated load

The structural behavior of a shallow arch is highly nonlinear, and so when the amplitude of the oscillation of the arch produced by a suddenly-applied load is sufficiently large, the oscillation of the arch may reach a position on its unstable equilibrium paths that leads the arch to buckle dynamically. This paper uses an energy method to investigate the nonlinear elastic dynamic in-plane buckling of a pinned–fixed shallow circular arch under a central concentrated load that is applied suddenly and with an infinite duration. The principle of conservation of energy is used to establish the criterion for dynamic buckling of the arch, and the analytical solution for the dynamic buckling load is derived. Two methods are proposed to determine the dynamic buckling load. It is shown that under a suddenly-applied central load, a shallow pinned–fixed arch with a high modified slenderness (which is defined in the paper) has a lower dynamic buckling load and an upper dynamic buckling load, while an arch with a low modified slenderness has a unique dynamic buckling load.     

压弯钢管拱极限承载力计算的等效梁柱法

对抛物线完善的和具有初始几何缺陷的钢管拱,应用双重非线性有限元方法,分析了其在拱顶集中力和非对称分布荷载作用下的失稳特性,提出了以GB50017-2003的轴力-弯矩相关方程为基本计算公式、采用考虑矢跨比因素的稳定系数和缺陷折减系数的等效梁柱法,与双重非线性有限元计算结果比较表明,这种等效梁柱法可方便且较精确地计算抛物线压弯钢管拱的极限承载力.     

两端固支复合材料浅拱的动力屈曲分析

本文研究两端固支层合复合材料浅拱在阶跃载荷作用下的动力稳定性问题。通过对浅拱动力响应的数值计算结果,然后利用B-R动力屈曲准则,着重分析了集中阶跃载荷作用下几种铺层顺序及铺层数对浅拱动力临界载荷的影响,并给出了能够产生‘跳跃失稳’的最小的结构参数γ0。此外,在利用伽辽金法求解浅拱动力学控制方程时,通过取梁的自由振动模态和柱的静力屈曲模态作为浅拱的动力屈曲模态,分别进行计算并比较了二者的结果,进而讨论了二级数解的收敛性。     

考虑混凝土应变率变化的高拱坝非线性动力响应研究

提出一种新的应变率相关的混凝土非线性弹塑性损伤模型。采用此模型对混凝土拱坝的非线性地震响应作了分析。在综合考虑坝-地基-库水动力相互作用和坝缝非线性接触的基础上，着重研究了混凝土应交率相关效应及加载历史对混凝土极限强度等重要参数及拱坝响应的影响，并与采用不考虑应交率影响的混凝土损伤模型计算结果进行了对比分析。结果表明，拱坝考虑横缝作用后的坝面应变率分布不同于整体拱坝。应交率分布形态不仅可以很好地表征拱坝的振动形态，而且对于高拱坝的动力响应的影响也不可忽略。     

Bifurcation analysis of an arch structure with parametric and forced excitation

The subharmonic bifurcation and universal unfolding problems are discussed for an arch structure with parametric and forced excitation in this paper. The amplitude–frequency curve and some dynamical behavior have been shown for this class of problems by Liu et al. Here, by means of singularity theory, in the case of strict 1:2 internal resonance, the bifurcation behavior of the amplitude with respect to a parameter (which is related to the amplitude of the live load imposed on the arch structures) is studied. The results indicate that it is a high codimensional bifurcation problem with codimension 5, and the universal unfolding is given. From the mechanical background, 20 forms of two parameter unfoldings with some constraints are studied. The transition sets in the parameter plane and the bifurcation diagrams are plotted. The results obtained in this paper present some new dynamic buckling patterns and abundant bifurcation phenomena.     

地震作用下高拱坝损伤开裂分析

采用应变率相关的砼非线性损伤模型模拟拱坝横缝,研究了砼非线性本构情况下整体拱坝与考虑分缝拱坝的应力响应和损伤开裂的特点与差别。对实际拱坝的地震响应分析表明,基于非线性砼模型的整体拱坝动力响应模型可以基本反映拱坝的实际应力分布情况。     

Dynamic buckling of a simple elastic-plastic model under pulse loading

The dynamic buckling of an elastic-plastic imperfection-sensitive model subjected to rectangular- and triangular-shaped loading pulses is examined to provide some insight into the dynamic buckling behaviour of structures. The loading pulse is expressed as a function of the horizontal displacement, which allows an analytical method to be used for determining the stability domains for both pulses. The estimates obtained are compared with some previously published results on the dynamic elastic-plastic buckling of the same model under a step loading. It transpires that for the pulse loading of models with large imperfections dynamic instability occurs either elastically or plastically depending on the pulse duration, while for a step loading only an elastic instability is possible for the parameters examined.     

Influence of Initial Geometric Imperfections on the Vibrations and Dynamic Stability of Elastic Shells

The results from studies into the vibrations and dynamic stability of thin elastic shells with initial geometric imperfections are analyzed. The corresponding dynamic problems are solved in both linear and nonlinear formulations. The influence of initial axisymmetric and nonaxisymmetric deflections on natural, forced, parametrically excited, and self-excited vibrations (flutter) is studied. The dynamic buckling of imperfect shells under short-term impulsive loading is examined. Some aspects of experimental investigation into the vibrations of shells with small geometric imperfections (deviations from the design shape) are considered     

集中载荷作用下圆拱梁的静分叉问题

采用有限元法中的伪弧长算法研究了集中载荷作用下圆拱的大范围非线性问题,给出了临界载荷与圆心角间的关系曲缄以及极值分叉与简单分叉的分界点,并对屈曲后的变形进行了追踪,文中首先简述伪弧长算法,然后给出了计算结果。     

Post-buckling behavior of a fixed arch for variable geometry structures

The behavior of a bistable strut for variable geometry structures was investigated in this paper. A fixed shallow arch subjected to a central concentrated load was used to study the equilibrium path of the bistable strut. Based on a nonlinear strain–displacement relationship, the critical loads for both the symmetric snap-through and asymmetric bifurcation buckling modes were obtained. Moreover, the principal of virtual work was also used to establish the post-buckling differential equilibrium equations of the arch in the horizontal and vertical directions. Therefore, the whole mechanical behavior before and after the buckling of fixed arches is investigated.     

柱壳在轴向冲击载荷作用下动态塑性屈曲的实验研究

圆柱壳的动态塑性屈曲问题的研究主要是集中在屈曲模态方面，至于屈曲的临介载荷与临介时时间则研究的较少，ＳＨＰＢ用于研究材料在高应变率下动态力学性能已为大家所熟悉，但用于研究结构的动态屈曲则未见报道，本文利用一装置对柱壳的动态塑性屈曲进行了实验研究，测出了壳体屈曲过程的载荷，轴向缩短量与时间的关系曲线，得到屈曲时的临介载荷与临介时间，同时发现壳体屈曲变形的一些规律并与静态实验的结果进行了比较，为理论分     

Research of air-cushion isolation effects on high arch dam reservoir

A three-dimensional (3D) finite element model of air-cushion isolated arch dam is presented with the nonlinear gas-liquid-solid multi-field dynamic coupling effect taken into account.In this model,the displacement formulation in Lagrange method,pressure formulation in Euler method,nonlinear contact model based on Coulomb friction law are applied to the air-cushion,reservoir and contraction joint domain,respectively.The dynamic response of Jinping I arch dam with a height of 305 m is analyzed using the seismic records of the Wenchuan Earthquake in 2008.Numerical results show that the air-cushion isolation reduces significantly the hydrodynamic pressure as well as the opening width for the contraction joints of high arch dam.     

考虑恒载效应的拱形梁静力近似解

应用虚功原理,推导了考虑恒载效应影响时拱形梁在活载作用下的非线性微分方程,得到了方程的近似闭合解。根据方程的解,讨论了恒载大小及结构自身刚度(矢高、跨度、惯性矩及惯性半径等)不同因素在考虑恒载效应时对拱形梁静力特性的影响。通过与Takabatake得到的直梁解析解结果及作者在其他文献提出的有限元方法对拱形梁分析结果的比较,验证了本文非线性微分方程及其求解公式。结果表明,本文给出的非线性微分方程对于拱形梁和直线梁具有通用性,初始恒载的存在减小了拱形梁在活载作用下的静力反应,这种影响与恒载的大小及结构自身的刚度有关,对轻型结构的设计提出了一些建议。     

The static and dynamic behavior of MEMS arch resonators near veering and the impact of initial shapes

We investigate experimentally and analytically the effect of initial shapes, arc and cosine wave, on the static and dynamic behavior of microelectromechanical systems (MEMS) arch resonators. We show that by carefully choosing the geometrical parameters and the initial shape of the arch, the veering phenomenon (avoided-crossing) among the first two symmetric modes can be strongly activated. To demonstrate this, we study electrothermally tuned and electrostatically driven initially curved MEMS resonators. Upon changing the electrothermal voltage, we demonstrate high frequency tunability of arc resonators compared to the cosine-configuration resonators for the first and third resonance frequencies. For arc beams, we show that the first resonance frequency increases up to twice its fundamental value and the third resonance frequency decreases until getting very close to the first resonance frequency triggering the veering phenomenon. Around the veering regime, we study experimentally and analytically the dynamic behavior of the arc beam for different electrostatic loads. The analytical study is based on a reduced order model of a nonlinear Euler–Bernoulli shallow arch beam model. The veering phenomenon is also confirmed through a finite-element multi-physics and nonlinear model.     

On dynamic buckling phenomena in axially loaded elastic-plastic cylindrical shells

Some characteristic features of the dynamic inelastic buckling behaviour of cylindrical shells subjected to axial impact loads are discussed. It is shown that the material properties and their approximations in the plastic range influence the initial instability pattern and the final buckling shape of a shell having a given geometry. The phenomena of dynamic plastic buckling (when the entire length of a cylindrical shell wrinkles before the development of large radial displacements) and dynamic progressive buckling (when the folds in a cylindrical shell form sequentially) are analysed from the viewpoint of stress wave propagation resulting from an axial impact. It is shown that a high velocity impact causes an instantaneously applied load, with a maximum value at t=0 and whether or not this load causes an inelastic collapse depends on the magnitude of the initial kinetic energy.     

拱桥悬臂施工过程中面内特征值的传递矩阵法

采用传递矩阵法对拱桥悬臂施工过程中的面内特征值问题进行求解,建立了该类桥型施工过程中面内竖弯刚度的评估方法.首先,将索和拱分别视为无垂度的张紧弦和欧拉伯努利梁,基于传递矩阵法基本理论推导了系统的总传递矩阵,考虑拱和索的边界条件以及索拱节点的位移连续性条件得到系统的特征值方程,进而计算出系统的频率和模态.同时,采用有限元...     

Dynamic, multimode buckling of thin-walled columns subjected to in-plane pulse loading

The present paper deals with dynamic, coupled buckling of long, prismatic columns simply supported at the ends. This investigation concerns thin-walled structures of a square cross-section with or without intermediate stiffeners under in-plane pulse loading. The dynamic load of a rectangular shape has been assumed in the analysis. The structures are composed of rectangular plates interconnected along longitudinal edges. A plate model is adopted in the analysis. The material of the structure is isotropic. The problem has been investigated on the basis of the disturbance theory. The dynamic critical load factor DLF has been determined using the Budiansky and Hutchinson criterion. The results obtained with the analytical-numerical method (ANM), which employs the asymptotic perturbation theory, have been compared with the finite element method (FEM).     

Influence of the connecting condition on the dynamic buckling of longitudinal impact for an elastic rod

The stress wave propagation law and dynamic buckling critical velocity are formulated and solved by considering a general axial connecting boundary for a slender elastic straight rod impacted by a rigid body. The influence of connecting stiffness on the critical velocity is investigated with varied impactor mass and buckling time. The influences of rod length and rod mass on the critical velocity are also discussed. It is found that greater connecting stiffness leads to larger stress amplitude, and further results in lower critical velocity. It is particularly noteworthy that when the connecting stiffness is less than a certain value,dynamic buckling only occurs before stress wave reflects off the connecting end. It is also shown that longer rod with larger slenderness ratio is easier to buckle, and the critical velocity for a larger-mass rod is higher than that for a lighter rod with the same geometry.