共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
齿轮—转子—滑动轴承系统时变非线性动力特性研究 总被引:4,自引:0,他引:4
本文应用求周期解的数值计算方法-打靶法和判定周期解稳定性的Floquet乘子研究了齿轮-转子-滑动轴承系统中齿轮啮合时变刚度,滑动轴承非线性特性对转子系统不平衡响应和失稳的影响,并比较了平衡位置失稳和不平均响应周期解失稳,以及按双轴计算与单轴计算结果的差别,为工程设计理论计算提供基础。 相似文献
3.
利用解析和数值方法,以弹簧摆为对象讨论了线性的时滞位移反馈控制对一类平方非线性系统动力学行为的影响。根据多尺度法得到了1:2内共振情况下一次近似解的慢变方程,基于此讨论了反馈控制参数对零解的稳定性和周期解振幅的影响。结果表明:耦合的反馈项在平均方程中并不出现。根据罗斯-霍尔维茨判据发现,没有反馈控制时该系统的零解总是不稳定的,而通过调整反馈增益或反馈时滞就可以很容易地使零解稳定。反馈时滞对周期解振幅的影响呈现周期性,反馈增益或时滞发生变化时,周期解振幅的变化会表现出鞍结分岔现象;同时基于MATLAB软件的数值计算结果验证了该理论分析的正确性。 相似文献
4.
非自治时滞反馈控制系统的周期解分岔和混沌 总被引:9,自引:0,他引:9
研究时滞反馈控制对具有周期外激励非线性系统复杂性的影响机理,研究对应的线性平衡态失稳的临界边界,将时滞非线性控制方程化为泛函微分方程,给出由Hopf分岔产生的周期解的解析形式.通过分析周期解的稳定性得到周期解的失稳区域,使用数值分析观察到时滞在该区域可以导致系统出现倍周期运动、锁相运动、概周期运动和混沌运动以及两条通向混沌的道路:倍周期分岔和环面破裂.其结果表明,时滞在控制系统中可以作为控制和产生系统的复杂运动的控制“开关”. 相似文献
5.
6.
7.
针对非线性弹性关节机械臂,研究传动过程中的时滞效应对机械臂系统周期振动的影响.本文改进了具有弹性关节的非线性机械臂动力学模型,引入时滞参数,应用多尺度法,得到系统的近似解析解,考察了时滞对机械臂系统周期运动的影响规律.数值软件计算结果表明解析解与数值解具有较好的吻合度.从而验证了本文多尺度方法的有效性和正确性. 相似文献
8.
应用同伦分析法研究了Mathieu-Duffing振子的周期解,展示了Mathieu-Duffing振子的周期1和周期2解的求解过程,通过求解构造的非线性代数方程组而获得周期解,应用Floquet理论判别了周期解的稳定性。比较了同伦分析方法得到的周期解和数值方法得到的周期解,结果表明两者具有一致性。 相似文献
9.
求解非线性动力系统周期解的改进打靶法 总被引:1,自引:1,他引:1
针对有周期解的动力系统边值问题可以转化为初值问题这一特点,改进了周期解的打靶
法数值求解. 在计算边界条件代数方程关于待定初值参数导数的过程中利用前一次
Runge-Kutta方法计算得到的节点函数值并通过再次利用Runge-Kutta方法获得了该导数值.
用此方法求解了Duffing方程及非线性转子---轴承系统的周期解,用Floquet理论判断了
周期解的稳定性,与普通打靶法作了比较,验证了方法的有效性. 相似文献
10.
建立了考虑瞬态油膜压力影响的热稳定性分析模型 ,用求解系统周期解分岔的 PNF法对推力轴承系统的热稳定性进行了研究 ,结合 Poincare映射与胞映射法思想 ,提出了用于分析系统周期稳态解全局特性的数值计算 PCM方法 ,并对推力轴承热系统周期稳态解的全局特性进行了考察 相似文献
11.
对《力学》中的物体自由度进行多方面分析,以深化教学、提高学生正
确分析物理问题的能力.使用实际教学分析的研究方法,在《力学》范围内讨论自由度与坐标、
自由与约束的关系并得以下结论:
(1) 同一物体的自由度随其所在的``空间'不同而不同, 不因坐标系的选取不同而
异, 在同类参考系中不因参考系的动静而有别;(2)自由度遵循叠加原理.
讨论了质点系的总自由度及相关计算问题,并指出研究《力学》中自由度的意义. 相似文献
12.
13.
When the state and input matrices of a multivariable linear time-invariant system are perturbed, the problem of the estimation of pole perturbance of closed-loop system is considered by making use of the theory of branching of solutions for nonlinear equations. 相似文献
14.
1.IntroductionThestudyofoscillator}'behaviorofneutraldifferentialequationsisarelativealnewfieldandisveryinterestinginapplications.Inrecentyears.theoscillatorytheoryfortheseequationshasbeenextensivelydeveloped.WerefertotherecentbookbyGyoriandLadaSI'I,Baino… 相似文献
15.
SWT-120风洞稳定段的性能测量 总被引:1,自引:0,他引:1
在普通超音速风洞中,由于受到噪声干扰,很难进行有效的边界层转捩特性试验研究,针对超声速流动特点发展较低噪声风洞十分必要,而稳定段设计的好坏直接影响到下游试验段噪声水平。本文介绍一座低噪声风洞稳定段的结构和性能测量结果。先对稳定段的结构设计做了简单介绍,然后对实验结果进行分析,实验结果表明在大角度扩散段内装置孔锥,稳定段安装消音夹层和阻尼网组等部件后,气流的速度脉动和压力脉动明显降低,其中压力脉动降低一个量级,速度脉动为1%。进一步优化设计和改进工艺,速度脉动还可进一步降低。测量结果表明SWT-120稳定段的设计是成功的,对我们以后发展更高性能的静风洞有借鉴和参考价值。 相似文献
16.
郭兴明 《应用数学和力学(英文版)》1996,17(5):445-450
CHARACTERISTICSOFSUBDIFFERENTIALSOFFUNCTIONS(郭兴明)CHARACTERISTICSOFSUBDIFFERENTIALSOFFUNCTIONS¥GuoXingming(ReceivedJune16,1995... 相似文献
17.
以汉中市综合管廊为工程背景,通过有限元软件,首先模拟分析综合管廊早龄期温度场,随后将温度场结果附加到管廊结构中求解温度应力,从而分析综合管廊早龄期混凝土温度应力与浇筑长度的关系。模拟分析发现:综合管廊在混凝土浇筑早期,温度场沿长度方向变化不显著,且随着浇筑长度的增加,温度场不变;在墙体温度上升阶段,墙体内部沿长度方向的应力主要为压应力,当墙体混凝土内部温度达到最高,混凝土开始降温,结构内变形由膨胀逐渐变为收缩,内力由压应力逐渐变为拉应力,随着时间的变化,墙体内外温差趋于稳定,墙体温度应力也逐渐平稳,此时温度应力主要受外界环境变化影响;当综合管廊浇筑长度在60m范围内,浇筑长度越大,温度应力越大,但当浇筑长度超过60m,温度应力不再增加。 相似文献
18.
唐文亮 《应用数学和力学(英文版)》1983,4(1):117-126
This paper reports a type of laws which governs action poten-tial of nervous impulses,and it is discussed by general form-nonlinear dispersive process.We find that the nervous wave is aslowly varying amplitude solitary wave in the small dispersivecase.we prove that the solitary wave is not generated in the or-dinary dispersion,but a travelling wave with varying amplitudesmay be obtained.The stability of various possible action poten-tials and bifurcation in overdamped case are also discussed inthis paper. 相似文献
19.
Prof. Dr. Sc. A.Ya. Malkin S.A. Bolgov V.P. Begishev V.A. Mansurov 《Rheologica Acta》1992,31(4):345-350
Simultaneous measurements of the components of dynamic modulus at the set of frequencies were made by Fourier-Transform Mechanical Spectroscopy (FTMS) to investigate the curing process of a segmented polyurethane.The whole process of curing is treated as consisting of three stages. In the first stage, the material can flow and this stage is complete at the gel-point. In the second stage, the curing proceeds in the network and ends with phase separation of aggregating segments (blocks) of polymeric chains. In the third stage, the curing continues in the two-phase system. The object of investigation was the transition from the second to the third stage. It was shown that the position of the maximum of loss tangent depends on frequency and does not coincide with different characteristic points marking the time dependencies of G and G. This is due to the formation of micro-particles of the newly formed phase. The FTMS method is used for separation of the modulus changes into parts related to formation of chemical and physical networks.Special means of treating calorimetric measurements identified a weak maximum heat output at the moment corresponding to the transition point. 相似文献
20.
In this paper we use the method of derivative expansion of multiple scales of singularperturbations and we have solve the forced vibration equation of a particle attached to anonlinear spring under the influence of slight viscous damping.The problem is of the fourthorder nonlinearity.Tle four cases discussed are: the soft excitation of non-resonance,thehard excitation of non-resonance,the soft excitation of resonance,the hard excitation ofresonance. 相似文献