对流扩散方程的摄动有限体积(PFV)方法及讨论

在有限体积(FV)方法的重构近似中,引入数值摄动处理,即把界面数值通量摄动展开成网格间距的幂级数,并利用积分方程自身的性质求出幂级数的系数,同时获得高精度迎风和中心型摄动有限体积(PFV)格式.对标量输运方程给出积分近似为二阶、重构近似为二、三和四阶迎风和中心型PFV格式,这些PFV格式的结构形式及使用基点数与一阶迎风格式完全一致,迎风PFV格式满足对流有界准则;二阶和四阶中心PFV格式对网格Peclet数的任意值均为正型格式,比常用的二阶中心格式优越.用一维标量输运和方腔流动算例说明PFV格式的优良性能,并把PFV方法与性质相近的摄动有限差分(PFD)方法及相关的高精度方法作了对比分析.     

同位网格摄动有限体积格式求解浮力驱动方腔流

利用对流扩散方程的摄动有限体积格式，在Rayleigh数从10$^{3}$ 到10$^{8}$的范围内对浮力驱动方腔流动问题作了数值模拟. 对流扩散方程的摄动 有限体积格式具有一阶迎风格式的简洁形式，使用相同的基点，重构近似精度高，特别是两 相邻控制体中心到公共界面的距离相等或不相等，PFV格式公式相同等优点. 在数值模拟中， 无论均匀网格还是非均匀网格均获得与DSC方法、自适应有限元法、多重网格法等Benchmark 解相符较好的数值结果，证明UPFV格式对高Rayleigh数对流传热问题的适用性和有效性.     

Perturbation finite volume method for convective-diffusion integral equation

A perturbation finite volume (PFV) method for the convective-diffusion integral equation is developed in this paper. The PFV scheme is an upwind and mixed scheme using any higher-order interpolation and second-order integration approximations, with the least nodes similar to the standard three-point schemes, that is, the number of the nodes needed is equal to unity plus the face-number of the control volume. For instance, in the two-dimensional (2-D) case, only four nodes for the triangle grids and five nodes for the Cartesian grids are utilized, respectively. The PFV scheme is applied on a number of 1-D linear and nonlinear problems, 2-D and 3-D flow model equations. Comparing with other standard three-point schemes, the PFV scheme has much smaller numerical diffusion than the first-order upwind scheme (UDS). Its numerical accuracies are also higher than the second-order central scheme (CDS), the power-law scheme (PLS) and QUICK scheme. The project supported by the National Natural Science Foundation of China (10272106, 10372106)     

Developing a physical influence upwind scheme for pressure-based cell-centered finite volume methods

In the framework of a cell-centered finite volume method (FVM), the advection scheme plays the most important role in developing FVMs to solve complicated fluid flow problems for a wide range of Reynolds numbers. Advection schemes have been widely developed for FVMs employing pressure-velocity coupling methodology in the incompressible flow limit. In this regard, the physical influence upwind scheme (PIS) is developed for a cell-centered finite volume coupled solver (FVCS) using a pressure-weighted interpolation method for linking the pressure and velocity fields. The well-known exponential differencing scheme and skew upwind differencing scheme are also deployed in the current FVCS and their numerical results are presented. The accuracy and convergence of the present PIS are evaluated solving flow in a lid-driven square cavity, a lid-driven skewed cavity, and over a backward-facing step (BFS). The flow within the lid-driven square cavity is numerically solved at Reynolds numbers from 400 to 10 000 on a relatively coarse mesh with respect to other reported solutions. The lid-driven skewed cavity test case at Reynolds number of 1000 demonstrates the numerical performance of the present PIS on nonorthogonal grids. The flow over a BFS at Reynolds number of 800 is numerically solved to examine capabilities of current FVCS employing the current PIS in inlet-outlet flow computations. The numerical results obtained by the current PIS are in excellent agreement with those of benchmark solutions of corresponding test cases. Incorporating implicit role of pressure terms in a pressure-weighted interpolation method and development of PIS provides satisfactory solution convergence alongside the numerical accuracy for the current FVCS. A particular numerical verification is performed for the V velocity calculation within the BFS flow field, which confirms the reliability of present PIS.     

A hybrid vertex-centered finite volume/element method for viscous incompressible flows on non-staggered unstructured meshes

This paper proposes a hybrid vertex-centered finite volume/finite element method for solution of the two dimensional (2D) incompressible Navier-Stokes equations on unstructured grids.An incremental pressure fractional step method is adopted to handle the velocity-pressure coupling.The velocity and the pressure are collocated at the node of the vertex-centered control volume which is formed by joining the centroid of cells sharing the common vertex.For the temporal integration of the momentum equations,an implicit second-order scheme is utilized to enhance the computational stability and eliminate the time step limit due to the diffusion term.The momentum equations are discretized by the vertex-centered finite volume method (FVM) and the pressure Poisson equation is solved by the Galerkin finite element method (FEM).The momentum interpolation is used to damp out the spurious pressure wiggles.The test case with analytical solutions demonstrates second-order accuracy of the current hybrid scheme in time and space for both velocity and pressure.The classic test cases,the lid-driven cavity flow,the skew cavity flow and the backward-facing step flow,show that numerical results are in good agreement with the published benchmark solutions.     

基于非结构化同位网格的SIMPLE算法

通过基于非结构化网格的有限体积法对二维稳态Navier—Stokes方程进行了数值求解。其中对流项采用延迟修正的二阶格式进行离散；扩散项的离散采用二阶中心差分格式；对于压力-速度耦合利用SIMPLE算法进行处理；计算节点的布置采用同位网格技术，界面流速通过动量插值确定。本文对方腔驱动流、倾斜腔驱动流和圆柱外部绕流问题进行了计算，讨论了非结构化同位网格有限体积法在实现SIMPLE算法时，迭代次数与欠松弛系数的关系、不同网格情况的收敛性、同结构化网格的对比以及流场尾迹结构。通过和以往结果比较可知，本文的方法是准确和可信的。     

Implementation of some higher-order convection schemes on non-uniform grids

A generalized formulation is applied to implement the quadratic upstream interpolation (QUICK) scheme, the second-order upwind (SOU) scheme and the second-order hybrid scheme (SHYBRID) on non-uniform grids. The implementation method is simple. The accuracy and efficiency of these higher-order schemes on non-uniform grids are assessed. Three well-known bench mark convection-diffusion problems and a fluid flow problem are revisited using non-uniform grids. These are: (1) transport of a scalar tracer by a uniform velocity field; (2) heat transport in a recirculating flow; (3) two-dimensional non-linear Burgers equations; and (4) a two-dimensional incompressible Navier-Stokes flow which is similar to the classical lid-driven cavity flow. The known exact solutions of the last three problems make it possible to thoroughly evaluate accuracies of various uniform and non-uniform grids. Higher accuracy is obtained for fewer grid points on non-uniform grids. The order of accuracy of the examined schemes is maintained for some tested problems if the distribution of non-uniform grid points is properly chosen.     

数值摄动算法及其CFD格式

作者提出的数值摄动算法把流体动力学效应耦合进NS方程组和对流扩散（CD）方程离散的数学基本格式（MBS）,特别是耦合进最简单的MBS即一阶迎风和二阶中心格式之中,由此构建成一系列新格式,称呼方便和强调耦合流体动力学起见,称它们为流体力学基本格式（FMBS）。构建FMBS的主要步骤是把MBS中的通量摄动重构为步长的幂级数,利用空间分裂和导出的高阶流体动力学关系式,把结点变量展开成Taylor级数,通过消除重构格式修正微分方程的截断误差诸项求出幂级数的待定系数,由此获得非线性FMBS。FMBS的公式是MBS与 （及 ）之简单多项式的乘积, 和 分别是网格Reynolds数和网格CFL数。FMBS和MBS使用相同结点,简单性彼此相当,但FMBS精度高稳定范围大,例如FMBS包含了许多绝对稳定和绝对正型、高阶迎风和中心有限差分（FD）格式和有限体积（FV）格式,这些格式对网格Reynolds数的任意值均为不振荡格式。可见对不振荡CFD格式的构建,数值摄动算法提供了不同于调节数值耗散等常见的人为构建方法,而利用流体力学自身关系以及把迎风机制通过上、下游摄动重构引入中心MBS的解析构建方法,FMBS除了直接应用于流体计算外;对于通过调节数值耗散、色散和数值群速度特性重构高分辨率格式的研究,最简单FMBS提供了比最简单MBS更精确、但同样简单的基础和起步格式。FMBS用于计算不可压缩流,可压缩流,液滴萃取传质,微通道两相流等,均获得良好数值结果或与已有Benchmark解一致的数值结果。已有文献称数值摄动算法为新型高精度格式和高的算法和高的格式;本文FMBS比数值摄动格式的称呼可更好反映FMBS的物理内容。文中也讨论了值得进一步研究的一些课题,该法亦可用于其它一些数学物理方程（例如,简化Boltzmann方程、磁流体方程、KdV-Burgers方程等）MBS耦合物理动力学效应的重构。      

A high-order compact scheme for solving the 2D steady incompressible Navier-Stokes equations in general curvilinear coordinates

In this paper, a high-order compact finite difference algorithm is established for the stream function-velocity formulation of the two-dimensional steady incompressible Navier-Stokes equations in general curvilinear coordinates. Different from the previous work, not only the stream function and its first-order partial derivatives but also the second-order mixed partial derivative is treated as unknown variable in this work. Numerical examples, including a test problem with an analytical solution, three types of lid-driven cavity flow problems with unusual shapes and steady flow past a circular cylinder as well as an elliptic cylinder with angle of attack, are solved numerically by the newly proposed scheme. For two types of the lid-driven trapezoidal cavity flow, we provide the detailed data using the fine grid sizes, which can be considered the benchmark solutions. The results obtained prove that the present numerical method has the ability to solve the incompressible flow for complex geometry in engineering applications, especially by using a nonorthogonal coordinate transformation, with high accuracy.     

A study of upstream-weighted high-order differencing for approximation to flow convection

This paper is concerned with a number of upstream-weighted second- and third-order difference schemes. Also considered are the conventional upwind and central difference schemes for comparison. It commences with a general difference equation which unifies all the given first-, second- and third-order schemes. The various schemes are evaluated through the use of the general equation. The unboundedness and accuracy of the solutions by the difference schemes are assessed via various analyses: examination of the coefficients of the difference equation, Taylor series truncation error analysis, study of the upstream connection to numerical diffusion, single-cell analysis. Finally, the difference schemes are tested on one- and two-dimensional model problems. It is shown that the high-order schemes suffer less from the problem of numerical diffusion than the first-order upwind difference scheme. However, unboundedness cannot be avoided in the solutions by these schemes. Among them the linear upwind difference scheme presents the best compromise between numerical diffusion and solution unboundedness.     

Analysis of fluid flow in constricted tubes and ducts using body-fitted non-staggered grids

A finite volume method for the calculation of laminar and turbulent fluid flows inside constricted tubes and ducts is described. The selected finite volume method is based on curvilinear non-orthogonal co-ordinates (body-fitted co-ordinates) and a non-staggered grid arrangement. The grids are either generated by transfinite interpolation or an elliptic grid generator. The method is employed for calculation of laminar flows through a tube, a converging-diverging duct and different constricted tubes by both a two- and a three-dimensional computer program. In addition, turbulent flow through an axisymmetric constricted tube is calculated. Both the power law scheme and the second-order upwind scheme are used. The calculated results are compared with the experimental data and with other numerical solutions.     

On the Accuracy of Upwind and Symmetric TVD Schemes in Simulating Low Mach Number Flow

The accuracy of MUSCL upwind and Yee-Roe-Davis symmetric TVD schemes for simulating low Mach number flow is studied through a numerical experiment of the 2-D lid driven cavity problem. The steady slate solution is reached by using a marching approach based on the pseudocompressibilty method in conjunction with implicit approximate factorization. A finite volume discretization of the conservation equations is used with a four level multigrid method to accelerate the convergence. The tests performed which were in the range of 100 ≤ Re ≤ 5000, show that the Yee-Roe-Davis symmetric scheme generates results in very good agreement with the benchmark results over this range of Re. The MUSCL upwind scheme accuracy deteriorates with the increasing Re.     

A numerical study of flow over a confined backward-facing step

Numerical solutions using the SIMPLE algorithms for laminar flow over a backward-facing step are presented. Five differencing schemes were used: hybrid; quadratic upwind (QUICK); second-order upwind (SOUD); central-differencing and a novel scheme named second-order upwind biased (SOUBD). The SOUBD scheme is shown to be part of a family of schemes which include the central-differencing, SOUD and QUICK schemes for uniform grids. The results of the backward-facing step problem are presented and are compared with other numerical solutions and experimental data to evaluate the accuracy of the differencing schemes. The accuracy of the differencing schemes was ascertained by using uniform grids of various grid densities. The QUICK, SOUBD and SOUD schemes gave very similar accurate results. The hybrid scheme suffered from excessive diffusion except for the finest grids and the central-differencing scheme only converged for the finest grids.     

Velocity–pressure coupling in finite difference formulations for the Navier–Stokes equations

A new numerical procedure for solving the two‐dimensional, steady, incompressible, viscous flow equations on a staggered Cartesian grid is presented in this paper. The proposed methodology is finite difference based, but essentially takes advantage of the best features of two well‐established numerical formulations, the finite difference and finite volume methods. Some weaknesses of the finite difference approach are removed by exploiting the strengths of the finite volume method. In particular, the issue of velocity–pressure coupling is dealt with in the proposed finite difference formulation by developing a pressure correction equation using the SIMPLE approach commonly used in finite volume formulations. However, since this is purely a finite difference formulation, numerical approximation of fluxes is not required. Results presented in this paper are based on first‐ and second‐order upwind schemes for the convective terms. This new formulation is validated against experimental and other numerical data for well‐known benchmark problems, namely developing laminar flow in a straight duct, flow over a backward‐facing step, and lid‐driven cavity flow. Copyright © 2010 John Wiley & Sons, Ltd.     

A decoupling numerical method for fluid flow

A first-order non-conforming numerical methodology, Separation method, for fluid flow problems with a 3-point exponential interpolation scheme has been developed. The flow problem is decoupled into multiple one-dimensional subproblems and assembled to form the solutions. A fully staggered grid and a conservational domain centred at the node of interest make the decoupling scheme first-order-accurate. The discretization of each one-dimensional subproblem is based on a 3-point interpolation function and a conservational domain centred at the node of interest. The proposed scheme gives a guaranteed first-order accuracy. It is shown that the traditional upwind (or exponentially weighted upstream) scheme is less than first-order-accurate. The pressure is decoupled from the velocity field using the pressure correction method of SIMPLE. Thomas algorithm (tri-diagonal solver) is used to solve the algebraic equations iteratively. The numerical advantage of the proposed scheme is tested for laminar fluid flows in a torus and in a square-driven cavity. The convergence rates are compared with the traditional schemes for the square-driven cavity problem. Good behaviour of the proposed scheme is ascertained.     

Effect of spatial discretization schemes on numerical solutions of viscoelastic fluid flows

This study examines the effect of discretization schemes for the convection term in the constitutive equation on numerical solutions of viscoelastic fluid flows. For this purpose, a temporally evolving mixing layer, a two-dimensional vortex pair interacting with a wall, and a fully developed turbulent channel flow are selected as test cases, and eight different discretization schemes are considered. Among them, the first-order upwind difference scheme (UD) and artificial diffusion scheme (AD), which are commonly used in the literature, show most stable and smooth solutions even for highly extensional flows. However, the stress fields are smeared too much by these schemes and the corresponding flow fields are quite different from those obtained by higher-order upwind difference schemes. Among higher-order upwind difference schemes investigated in this study, a third-order compact upwind difference scheme (CUD3) with locally added AD shows stable and most accurate solutions for highly extensional flows even at relatively high Weissenberg numbers.     

Augmented upwind numerical schemes for the groundwater transport advection‐dispersion equation with local operators

When solute transport is advection‐dominated, the advection‐dispersion equation approximates to a hyperbolic‐type partial differential equation, and finite difference and finite element numerical approximation methods become prone to artificial oscillations. The upwind scheme serves to correct these responses to produce a more realistic solution. The upwind scheme is reviewed and then applied to the advection‐dispersion equation with local operators for the first‐order upwinding numerical approximation scheme. The traditional explicit and implicit schemes, as well as the Crank‐Nicolson scheme, are developed and analyzed for numerical stability to form a comparison base. Two new numerical approximation schemes are then proposed, namely, upwind–Crank‐Nicolson scheme, where only for the advection term is applied, and weighted upwind‐downwind scheme. These newly developed schemes are analyzed for numerical stability and compared to the traditional schemes. It was found that an upwind–Crank‐Nicolson scheme is appropriate if the Crank‐Nicolson scheme is only applied to the advection term of the advection‐dispersion equation. Furthermore, the proposed explicit weighted upwind‐downwind finite difference numerical scheme is an improvement on the traditional explicit first‐order upwind scheme, whereas the implicit weighted first‐order upwind‐downwind finite difference numerical scheme is stable under all assumptions when the appropriate weighting factor (θ) is assigned.     

Basic function scheme of polynomial type

A new numerical method named as basic function method is proposed. It can directly discretize differential operators on unstructured grids. By expanding the basic function to approach the exact function, the central and upwind schemes of derivative are constructed. By using the second-order polynomial as a basic function and applying the flux splitting method and the combination of central and upwind schemes to suppress non-physical fluctuation near shock waves, a second-order basic function scheme of polynomial type is proposed to solve inviscid compressible flows numerically. Numerical results of typical examples for two-dimensional inviscid compressible transonic and supersonic steady flows indicate that the new scheme has high accuracy and high resolution for shock waves. Combined with the adaptive remeshing technique, satisfactory results can be obtained.     

Evaluation of various high-order-accuracy schemes with and without flux limiters

Conventional high-order schemes with reduced levels of numerical diffusion produce results with spurious oscillations in areas where steep velocity gradients exist. To prevent the development of non-physical oscillations in the solution, several monotonic schemes have been proposed. In this work, three monotonic schemes, namely Van Leer's scheme, Roe's flux limiter and the third-order SHARP scheme, are compared and evaluated against schemes without flux limiters. The latter schemes include the standard first-order upwind scheme, the second-order upwind scheme and the QUICK scheme. All the above schemes are applied to four two-dimensional problems: (i) rotation of a scalar ‘cone’ field, (ii) transport of a scalar ‘square’ field, (iii) mixing of a cold with a hot front and (iv) deformation of a scalar ‘cone’ field. These problems test the ability of the selected schemes to produce oscillation-free and accurate results in critical convective situations. The evaluation of the schemes is based on several aspects, such as accuracy, economy and complexity. The tests performed in this work reveal the merits and demerits of each scheme. It is concluded that high-order schemes with flux limiters can significantly improve the accuracy of the results.     

Computation of non-equilibrium hypersonic flow with artificially upstream flux vector splitting (AUFS) schemes

The AUFS scheme has been presented for solving the Euler equations [Sun, M., Takayama, K., 2003. An artificially upstream flux vector splitting scheme for the Euler equations. Journal of Computational Physics, 189, 305–329]. An extension of this high resolution scheme-based on upwind numerical methods has been developed to calculate a two-dimensional hypersonic viscous flowfield in thermochemical non-equilibrium. The time-dependent Navier–Stokes governing equations are computed by using a multi-block finite volume technique on a structured mesh. The convective fluxes at the interfaces are evaluated using a flux vector splitting (FVS) method with a second-order reconstruction of the interface values and the viscous terms are discretised by second-order central differences. A better evaluation of aerodynamic parameters are obtained with this AUFS scheme and they are also compared to those obtained by previous works. The freestream flow conditions of these computations correspond to high-enthalpy flows with a Mach number range between 6.4 and 25.9. The obtained numerical results indicate that the AUFS scheme is accurate, robust, and efficient for the calculation of hypersonic flow.