研究了雷诺数Re=200, 1000, 线速度比$\alpha =0.5$,

研究了雷诺数Re=200, 1000, 线速度比$\alpha =0.5$, 2.0, 4.0, 强迫振荡频率$f_{s}=0.1\sim 2.0$情况下的旋转振荡圆柱绕流问题. 通 过基于非结构同位网格有限体积法对Navier-Stokes方程进行数值求解. 对流项、扩 散项和非恒定项的离散格式均具有二阶精度，利用SIMPLE算法处理压力-速度耦合. 计算得到了作用力系数随不同控制参数的变化规律. 通过对升力系数的频谱分析得到 自然脱落频率和强迫振荡频率下的作用力振幅. 通过对不同频率作用力幅值的分析， 得到频率之间的竞争关系，进而定量地给出了不同尾迹涡脱落模式的分区图.     

基于非结构网格求解二维浅水方程的高精度有限体积方法

采用HLL格式,在三角形非结构网格下采用有限体积离散,建立了求解二维浅水方程的高精度的数值模型.本文采用多维重构和多维限制器的方法来获得高精度的空间格式以及防止非物理振荡的产生,时间离散采用三阶Runge-Kutta法以获得高阶的时间精度.基于三角形网格,底坡源项采用简单的斜底模型离散,为保证计算格式的和谐性,对经典的HLL格式计算的数值通量中的静水压力项进行了修正.算例证明本文提出的方法的和谐性并具有高精度的间断捕捉能力和稳定性.     

用任意不规则网格求解N-S方程

引入辅助点法开发了新的通量近似计算方法，建立了采用任意不规则畸变网格作为控制体积的单元中心有限体积求解Navier—Stokes的方法。它以同位网格作为变量布置方式，压力一速度耦合采用SIMPLE方法。数值算例表明，该算法对高度不规则的畸变网格适应性强；其改进了传统算法在不规则网格下计算的困难，保证了模型在高扭曲度的网格下的整体计算精度不受网格拉伸畸变和剪切畸变的影响。     

利用非结构化网格方法对翼型绕流的数值研究

利用同位非结构化网格上的压力加权修正算法 ,对翼型湍流绕流进行了数值分析。详细地给出了一孤立翼型在不同攻角下的分离流结构及翼型表面压力分布 ,为了显示非结构化网格方法在求解多连通流动区域的优越性 ,对双翼型绕流进行了数值计算。在数值分析中 ,对阵面推进法进行改进来生成三角形网格 ,采用有限控制体方法直接在物理空间中的非结构化网格单元上离散 Navier- Stokes方程及 k- ε方程 ,形成的代数方程组通过预条件矩阵共轭梯度平方法求解。计算结果表明 :当流动为附着流时 ,计算结果与实验值吻合程度令人相当满意 ;而在分离区内 ,计算结果与实验值存在一定的误差 ,需对分离区内的湍流模型做进一步的改进。     

粘性流基于特征线的四阶Runge-Kutta有限元法

对于二维不可压缩粘性流，通过沿流线方向的坐标变换，推导了无对流项的二维N-S（Navier-Stokes）方程。采用四阶Runge-Kutta法对N-S方程进行时间离散，并沿流线进行Taylor展开，得到显式的时间离散格式，然后利用Galerkin法对其进行空间离散，得到了高精度的有限元算法。利用本文算法对方腔驱动流和圆柱绕流进行了数值计算，通过对时间步长、网格尺寸和流场区域的计算分析，进一步验证了本文算法相比经典CBS法在时间步长、收敛性、耗散性和计算精度方面更具有优势。     

NND格式在非结构网格中的推广

在张涵信提出的无波动、无自由参数的差分格式（ＮＮＤ格式）的基础上，构造了适用于非结构网格的二阶精度ＮＮＤ有限体积格式，解决了现有非结构网格方法中为抑制激波附近的波动而必须引入含自由参数的人工粘性项的困难，并采用网格自适应技术以提高效率．通过对二维平板激波反射和前台阶在管道内的流动问题的计算，表明本方法可有效地用于Ｅｕｌｅｒ方程的求解．     

基于同位网格下求解N-S方程的快速算法

在有限容积法基础上建立了基于同位网格的SIMPLEM算法。此算法使初始压力场与速度场耦合,让压力场和速度场同时更好地满足动量方程和连续性方程,且兼顾考虑扩散对流项对计算节点速度修正值的影响及源项与速度场之间的同步性,详细给出了算法的推导过程且对方腔顶盖驱动流进行了数值模拟。计算节点的布置采用同位网格技术,界面流速通过动量插值确定,在不同条件下讨论了迭代次数与残差的关系和不同算法的收敛性,同时验证了算法及程序是准确和可信的。     

燃烧室两相流场亚网格燃烧模型的研究

在三维任意曲线坐标系下采用不同的亚网格燃烧模型对环形燃烧室火焰筒气液两相湍流瞬态反应流进行大涡模拟．计算中所采用的数学度模型有：k方程亚网格尺度模型估算亚网格湍流黏性；热通量辐射模型估算辐射换热，分别采用亚网格EBU燃烧模型（E-A model）、亚网格二阶矩输运方程模型（SOM）和亚网格二阶矩代数模型（SOM-A）估算化学反应速率．并在非交错网格系统下气相采用SIMPLE算法和混合差分格式求解，液相采用Lagrange处理，并用PSIC算法对其进行求解．通过实验结果和计算结果的比较，表明在三维任意曲线坐标系下对燃烧室火焰简两相湍流油雾燃烧流场进行大涡模拟，3种不同的亚网格燃烧模型都能真实反映两相湍流化学反应流流动及实际燃烧过程，而采用亚网格二阶矩输运方程模型稍优于其他两种亚网格燃烧模型．     

粘性流基于特征线的四阶Runge-Kutta有限元法

对于二维不可压缩粘性流,通过沿流线方向的坐标变换,推导了无对流项的二维N-S(Navier-Stokes)方程。采用四阶Runge-Kutta法对N-S方程进行时间离散,并沿流线进行Taylor展开,得到显式的时间离散格式,然后利用Galerkin法对其进行空间离散,得到了高精度的有限元算法。利用本文算法对方腔驱动流和圆柱绕流进行了数值计算,通过对时间步长、网格尺寸和流场区域的计算分析,进一步验证了本文算法相比经典CBS法在时间步长、收敛性、耗散性和计算精度方面更具有优势。     

脉冲爆震发动机进气道气动性能的数值研究

采用有限体积法计算了脉冲爆震发动机某轴对称超音速进气道在3种 不同出口条件(单个正弦扰动压力、某脉冲爆震发动机爆震室头部表压和进气道出口堵塞) 下的进气道内结尾正激波的运动情况，得出了进气道内结尾正激波运动特性和不同出口条件 的关系. 在计算中，采用了多块结构化网格，控制体积的界面无黏通量采用三阶迎风格 式插值获得，同时采用了minmod通量限制器以确保在激波处的解的物理特性；扩散通量采 用二阶中心差分格式插值获得. 定常计算采用当地时间步法，非定常计算采用双时间步法. 离散的代数方程采用交替方向迭代法求解。     

Numerical analysis of conservative unstructured discretisations for low Mach flows

Unstructured meshes allow easily representing complex geometries and to refine in regions of interest without adding control volumes in unnecessary regions. However, numerical schemes used on unstructured grids have to be properly defined in order to minimise numerical errors. An assessment of a low Mach algorithm for laminar and turbulent flows on unstructured meshes using collocated and staggered formulations is presented. For staggered formulations using cell‐centred velocity reconstructions, the standard first‐order method is shown to be inaccurate in low Mach flows on unstructured grids. A recently proposed least squares procedure for incompressible flows is extended to the low Mach regime and shown to significantly improve the behaviour of the algorithm. Regarding collocated discretisations, the odd–even pressure decoupling is handled through a kinetic energy conserving flux interpolation scheme. This approach is shown to efficiently handle variable‐density flows. Besides, different face interpolations schemes for unstructured meshes are analysed. A kinetic energy‐preserving scheme is applied to the momentum equations, namely, the symmetry‐preserving scheme. Furthermore, a new approach to define the far‐neighbouring nodes of the quadratic upstream interpolation for convective kinematics scheme is presented and analysed. The method is suitable for both structured and unstructured grids, either uniform or not. The proposed algorithm and the spatial schemes are assessed against a function reconstruction, a differentially heated cavity and a turbulent self‐igniting diffusion flame. It is shown that the proposed algorithm accurately represents unsteady variable‐density flows. Furthermore, the quadratic upstream interpolation for convective kinematics scheme shows close to second‐order behaviour on unstructured meshes, and the symmetry‐preserving is reliably used in all computations. Copyright © 2016 John Wiley & Sons, Ltd.     

Computation of viscous incompressible flow using pressure correction method on unstructured Chimera grid

In this paper, a pressure correction algorithm for computing incompressible flows is modified and implemented on unstructured Chimera grid. Schwarz method is used to couple the solutions of different sub-domains. A new interpolation to ensure consistency between primary variables and auxiliary variables is proposed. Other important issues such as global mass conservation and order of accuracy in the interpolations are also discussed. Two numerical simulations are successfully performed. They include one steady case, the lid-driven cavity and one unsteady case, the flow around a circular cylinder. The results demonstrate a very good performance of the proposed scheme on unstructured Chimera grids. It prevents the decoupling of pressure field in the overlapping region and requires only little modification to the existing unstructured Navier–Stokes (NS) solver. The numerical experiments show the reliability and potential of this method in applying to practical problems.     

Numerical simulation of fluid flows using an unstructured finite volume method with adaptive tri‐tree grids

A tri‐tree grid generation procedure is developed together with a finite volume method on the unstructured grid for solving the Navier–Stokes equations. A hierarchic numbering system for the data structure is used. The grid is adapted by adding and removing cell elements dependent on the vorticity magnitude. A special treatment is developed to ensure good quality triangular elements around the cylinder boundary. The adopted finite volume method is based on the cell‐centred scheme. The pressure–velocity coupling is treated using the SIMPLE algorithm. A modified QUICK scheme for unstructured grids is derived. The developed method is used to simulate the flow past a single and multiple cylinders at low Reynolds number. The obtained results are in good agreement with the published data. Copyright © 2002 John Wiley & Sons, Ltd.     

多维迎风方法在非结构/混合网格热流计算中的应用研究

非结构/混合网格具有极强的几何灵活性,在复杂外形飞行器的气动力特性数值模拟中已得到广泛应用,但目前还难以准确地预测气动热环境。本文从非结构/混合网格热流计算的三个需求出发,选取了多维迎风方法,并与其他方法进行了对比研究。以二维圆柱高超声速绕流这一Benchmark典型问题为例,对比研究了多维迎风方法和几种广泛使用的无粘通量格式(Roe格式、Van Leer格式和AUSMDV格式)对混合网格热流计算精度的影响。结果表明,多维迎风方法在热流计算精度、鲁棒性以及收敛性方面表现良好。最后,将多维迎风方法应用于常规混合网格上的圆柱和钝双锥绕流问题,均得到了较好的热流计算结果,为非结构/混合网格热流计算在复杂高超飞行器中的应用奠定了基础。     

Computation of Compressible Flows using a Two-equation Turbulence Model on Unstructured Grids

This paper presents a numerical method for solving compressible turbulent flows using a k - l turbulence model on unstructured meshes. The flow equations and turbulence equations are solved in a loosely coupled manner. The flow equations are advanced in time using a multi-stage Runge-Kutta time stepping scheme, while the turbulence equations are advanced using a multi-stage point-implicit scheme. The positivity of turbulence variables is achieved using a simple change of dependent variables. The developed method is used to compute a variety of turbulent flow problems. The results obtained are in good agreement with theoretical and experimental data, indicating that the present method provides a viable and robust algorithm for computing turbulent flows on unstructured meshes.     

A parallel implicit domain decomposition algorithm for the large eddy simulation of incompressible turbulent flows on 3D unstructured meshes

We present a parallel fully implicit algorithm for the large eddy simulation (LES) of incompressible turbulent flows on unstructured meshes in three dimensions. The LES governing equations are discretized by a stabilized Galerkin finite element method in space and an implicit second-order backward differentiation scheme in time. To efficiently solve the resulting large nonlinear systems, we present a highly parallel Newton-Krylov-Schwarz algorithm based on domain decomposition techniques. Analytic Jacobian is applied in order to obtain the best achievable performance. Two benchmark problems of lid-driven cavity and flow passing a square cylinder are employed to validate the proposed algorithm. We then apply the algorithm to the LES of turbulent flows passing a full-size high-speed train with realistic geometry and operating conditions. The numerical results show that the algorithm is both accurate and efficient and exhibits a good scalability and parallel efficiency with tens of millions of degrees of freedom on a computer with up to 4096 processors. To understand the numerical behavior of the proposed fully implicit scheme, we study several important issues, including the choices of linear solvers, the overlapping size of the subdomains, and, especially, the accuracy of the Jacobian matrix. The results show that an exact Jacobian is necessary for the efficiency and the robustness of the proposed LES solver.     

A numerical stabilization framework for viscoelastic fluid flow using the finite volume method on general unstructured meshes

A robust finite volume method for viscoelastic flow analysis on general unstructured meshes is developed. It is built upon a general‐purpose stabilization framework for high Weissenberg number flows. The numerical framework provides full combinatorial flexibility between different kinds of rheological models on the one hand, and effective stabilization methods on the other hand. A special emphasis is put on the velocity‐stress‐coupling on colocated computational grids. Using special face interpolation techniques, a semi‐implicit stress interpolation correction is proposed to correct the cell‐face interpolation of the stress in the divergence operator of the momentum balance. Investigating the entry‐flow problem of the 4:1 contraction benchmark, we demonstrate that the numerical methods are robust over a wide range of Weissenberg numbers and significantly alleviate the high Weissenberg number problem. The accuracy of the results is evaluated in a detailed mesh convergence study.     

SIMPLE‐type preconditioners for cell‐centered,colocated finite volume discretization of incompressible Reynolds‐averaged Navier–Stokes equations

This paper contains a comparison of four SIMPLE‐type methods used as solver and as preconditioner for the iterative solution of the (Reynolds‐averaged) Navier–Stokes equations, discretized with a finite volume method for cell‐centered, colocated variables on unstructured grids. A matrix‐free implementation is presented, and special attention is given to the treatment of the stabilization matrix to maintain a compact stencil suitable for unstructured grids. We find SIMPLER preconditioning to be robust and efficient for academic test cases and industrial test cases. Compared with the classical SIMPLE solver, SIMPLER preconditioning reduces the number of nonlinear iterations by a factor 5–20 and the CPU time by a factor 2–5 depending on the case. The flow around a ship hull at Reynolds number 2E9, for example, on a grid with cell aspect ratio up to 1:1E6, can be computed in 3 instead of 15 h.Copyright © 2012 John Wiley & Sons, Ltd.     

On the Computation of Compressible Turbulent Flows on Unstructured Grids

An accurate, fast, matrix-free implicit method has been developed to solve compressible turbulent How problems using the Spalart and Allmaras one equation turbulence model on unstructured meshes. The mean-flow and turbulence-model equations are decoupled in the time integration in order to facilitate the incorporation of different turbulence models and reduce memory requirements. Both mean flow and turbulent equations are integrated in time using a linearized implicit scheme. A recently developed, fast, matrix-free implicit method, GMRES+LU-SGS, is then applied to solve the resultant system of linear equations. The spatial discretization is carried out using a hybrid finite volume and finite element method, where the finite volume approximation based on a containment dual control volume rather than the more popular median-dual control volume is used to discretize the inviscid fluxes, and the finite element approximation is used to evaluate the viscous flux terms. The developed method is used to compute a variety of turbulent flow problems in both 2D and 3D. The results obtained are in good agreement with theoretical and experimental data and indicate that the present method provides an accurate, fast, and robust algorithm for computing compressible turbulent flows on unstructured meshes.