K型管节点的应力集中系数研究

采用有限元法分析了K型管节点在承受轴力作用下的应力集中系数. 用三维固体单元模 拟结构,模拟中对不同区域分别划分网格,每个区域的网格独立产生后,再形成整个结构的 有限元网格. 使用ABAQUS软件分析了200组在轴向循环载荷作用下的节点数值模型,获得 了K节点在轴向循环载荷作用下沿焊缝的应力集中系数(SCF),并对主管和支管的SCF进行 研究,得出了节点几何参数对主管和支管的SCF及极值位置的影响规律.     

含局部焊接细节的钢桁架结构静动力响应实验研究

从考虑损伤的结构有限元模拟的研究需要出发,对考虑焊连接细节构造的钢桁架结构试样进行了结构动力特性及特定载荷下的静力响应实验研究。文中给出了对试样结构进行动力特性测试和结构整体与局部应力分布状态的测试结果及其分析,并将有限元计算的结果与测试结果进行了对比分析。研究结果表明：结构动力特性的计算结果和测试值比较接近,存在的误差主要来自于边界条件的不确定性和可能的材料不均匀性;边界约束的形式对结构名义应力的分布有明显的影响,但对于焊接细节处的热点应力分布的影响很小。实验中所关注部位的热点应力在均布载荷作用下随载荷级别的提高,应力值由下翼缘的中间向两边增大,在焊缝附近有应力突变。     

弹性半空间地基上预应力中厚矩形板的弯曲

基于Reissner-Mindlin一阶剪切变形理论,讨论在预加面内机械荷载或预加温度场作用下,弹性半空间地基上四边自由中厚矩形板的弯曲问题。把地基看作三维弹性半空间体,考虑地基变形的衰减。用一组数学上完备的二元多项式作为位形函数,采用pb-2 Rayleigh-Ritz法求得四边自由中厚矩形板的挠度和弯矩,并讨论了初应力对板的挠度和弯矩的影响。     

ELASTICITY SOLUTIONS OF SPHERICALLY ISOTROPIC CONES UNDER CONCENTRATED LOADS AT APEX

ＥＬＡＳＴＩＣＩＴＹＳＯＬＵＴＩＯＮＳＯＦＳＰＨＥＲＩＣＡＬＬＹＩＳＯＴＲＯＰＩＣＣＯＮＥＳＵＮＤＥＲＣＯＮＣＥＮＴＲＡＴＥＤＬＯＡＤＳＡＴＡＰＥＸＤｉｎｇＨａｏｊｉａｎｇ（丁皓江）；ＺｏｕＤａｏｑｉｎ（邹道勤）；ＲｅｎＹｏｎｇｊｉａｎ；（任永坚）（...     

Nonlinear Deformation and Stability of a Noncircular Cylindrical Shell Under Combined Loading with Bending and Twisting Moments

A previously developed technique is used to solve problems of strength and stability of discretely reinforced noncircular cylindrical shells made of a composite material with allowance for the moments and nonlinearity of their subcritical stress–strain state. Stability of a reinforced bay of the aircraft fuselage made of a composite material under combined loading with bending and twisting moments is studied. The effects of straining nonlinearity, stiffness of longitudinal ribs, and shell thickness on the critical loads that induce shell buckling are analyzed.     

薄板弯曲问题的虚边界元-最小二乘法

本文提出求解任意形状的薄板弯曲问题的虚边界元-最小二乘法。本法首先利用薄板弯曲平衡方程的格林函数和离开实际边界上分布的未知的横向荷载和法向弯矩函数建立满足实际边界条件的积分方程;然后采用最小二乘法和沿虚边界分段离散化的待定的分布横向荷载和法向弯矩函数得到求上述积分方程离散化数值解的线性代数方程组。导出了一系列的数值积分的公式,并求解了许多例题,数值结果说明本法完全避免了奇异积分及其复杂的处理方法和耗时的运算,而且在边界及其附近区域解的精度比普通边界元(以后简称边界元)法大大地提高了。     

A NEW SPATIAL THIN-WALLED BEAM ELEMENT INCLUDING TRANSVERSE AND TORSIONAL SHEAR DEFORMATION

基于Timoshenko梁及Benscoter薄壁杆件理论,建立了考虑剪切变形、弯扭耦合以及翘曲剪应力影响的空间任意开闭口薄壁截面梁单元. 通过引入单元内部结点,对弯曲转角和翘曲角采用三节点Lagrange独立插值的方法,考虑了剪切变形和翘曲剪应力的影响并避免了横向剪切锁死问题;借助载荷作用下薄壁梁的截面运动分析,在位移和应变方程中考虑了弯扭耦合的影响. 通过数值算例将该单元的计算结果与理论解以及商用有限元软件和其他文献中的数值解进行对比和验证,结果对比表明该薄壁梁单元具有良好的精度和收敛性.     

Elasticity solutions of spherically isotropic cones under concentrated loads at apex

Based on the Ref. [9], the displacement and stress distributions in a spherically isotropic cone subjected to concentrated loads at apex are studied. The displacement and stresses are given explicily for the cone in compression torsion and bending cases, respectively, based on the situation of the concentrated forces and moments. Finally, the hollow cone problems are discussed. Project supported by National Natural Science Foundation of China     

EXPERIMENTAL STUDY OF SUBSIDENCE DEFORMATION OF AEOLIAN SOIL AROUND FUXIN CITY UNDER SEISMIC LOADS

地震作用诱发的场地土震陷问题引起了人们广泛关注. 以阜新地区风积土为研究对象,进行了50年超越概率2% 和10% 的地震载荷及等幅正弦载荷作用下风积土的震陷试验,探讨了振动次数、动应力幅值和含水量对风积土震陷系数的影响规律,建立了风积土震陷系数经验公式. 依据分层总和法估算了2 条地震载荷和等幅正弦载荷作用下风积土场地震陷量,并对场地风积土的震陷性进行了评价. 以上研究成果将为阜新地区风积土地基的抗震防震设计提供参考依据,具有重要的工程应用价值.     

BAR SIMULATION METHOD FOR BENDING NORMAL STRESS OF I-BEAM IN CONSIDERATION OF SHEAR EFFECT 1)

随着工字形短深梁和宽翼缘梁结构的发展,截面非线性剪切变形对弯曲应力的影响愈加突出,导致传统设计中所采用的初等梁理论计算结果误差较大,不再适用。本文基于比拟杆法综合考虑剪切效应,推导出工字形梁横力弯曲应力解析计算公式,并与有限元及现有解析计算方法进行对比分析。结果表明：当跨高比较小,翼缘腹板面积比较大时剪切效应对弯曲变形有显著影响。同时相比于现有解析方法,本文计算结果精度较高且适用范围更广,可用于梁结构设计。     

STUDY ON AMPLIFICATION FACTOR OF FLEXURAL BUCKLING CRITICAL LOAD OF AXIAL COMPRESSION BARS1)

为了建立一般条件下轴压构件屈曲临界载荷的计算理论,首先对轴心受压构件发生屈曲时的总势能方程进行了推导,然后采用Rayleigh-Ritz法并基于势能驻值原理得到了4种不同端部约束条件下轴压构件的屈曲临界载荷,对比欧拉临界载荷,给出了临界载荷放大系数 的计算式,全面考虑了构件长细比、压缩变形、剪切变形以及截面形状系数对临界载荷的影响,推导的计算式可用于较小长细比轴压构件发生屈曲时临界载荷的计算.圆截面和双轴对称工字形截面轴压构件屈曲临界载荷的分析表明构件长细比是影响放大系数的主导因素。     

正交异性扁壳的等价关系式和不变量

提出各向同性扁壳比拟法,分析满足条件D_3=D_(12)=(D_1D_2)~(1/2)的正交异性扁壳大挠度弯曲和超屈曲问题,导出了正交异性扁壳与各向同性扁壳之间,两种不同正交异性扁壳之间坐标变量、扁壳厚度和曲率半径、荷载、挠度、转角、弯矩、扭矩、中面应力的等价关系式,还证明了等价正交异性扁壳的几个等价不变量。     

SINGULAR SOLUTIONS OF ANISOTROPIC PLATE WITH AN ELLIPTICAL HOLE OR A CRACK

In the present paper, closed form singular solutions for an infinite anisotropic plate with an elliptic hole or crack are derived based on the Stroh-type formalism for the general anisotropic plate. With the solutions, the hoop stresses and hoop moments around the elliptic hole as well as the stress intensity factors at the crack tip under concentrated in-plane stresses and bending moments are obtained. The singular solutions can be used for approximate analysis of an anisotropic plate weakened by a hole or a crack under concentrated forces and moments.They can also be used as fundamental solutions of boundary integral equations in BEM analysis for anisotropic plates with holes or cracks under general force and boundary conditions.     

不同运动条件下足球气动力及流场分析

为了获得足球空气动力学特性,建立了计算模型,并利用Fluent 软件分别计算了无自旋及有自旋条件下的足球绕流场. 仿真结果与已有工作相比较为合理. 在无自旋条件下,通过分析足球表面极限流线发现接缝使得足球表面分离线与圆球明显不同,接缝深刻地影响三维分离情况,而且还会对足球所受升力大小产生影响;在自旋条件下,足球受到的Magnus力随旋转速度变大而变大;同时还发现,足球受到阻力也会随其旋转速度变大而变大. 最后,本文还以一粒定位球罚球为例考察了足球旋转对其运动轨迹的影响.     

Thin plate bending problem of dissimilar strips with two bond lines

Summary A solution to the thin plate bending problem of partially bonded dissimilar strips with two bond lines is presented. The two strips are symmetrically bonded with respect to the interface which is on theX-axis. The complex stress functions approach together with the rational mapping function technique are used in the analysis. A concentrated bending moment applied at each strip is considered. Distributions of bending and torsional moments, as well as the stress intensity of debonding (SID) at the debonding tips are obtained, and the debonding extension is investigated.     

Stability and second-order non-linear analysis of 2D multi-column systems with semirigid connections: Effects of initial imperfections

An analytical method and closed-form equations that evaluate the elastic stability and second-order response of 2D multi-column systems with initial geometric imperfections (i.e., columns with initial curvature or out-of-straightness and out-of-plumbness in the plane of bending) and semirigid connections subjected to eccentric axial loads and to a lateral load at the top floor level are derived in a classical manner. The proposed method is based on the Euler–Bernoulli theory and limited to 2D multi-column systems with sidesway uninhibited or partially inhibited subjected to gravity loads. The combined effects of initial imperfections and semirigid connections in the plane of bending are condensed into the proposed equations, which can also be used to evaluate the induced elastic bending moments and second-order deflections along each column member of a multi-column system as the lateral and axial loads are applied. The effects of torsion, shear and axial deformations along each column and out-of-plane deformations are not included. Three examples are presented in detail that demonstrate the effectiveness of the proposed method and the corresponding closed form equations showing the importance of initial imperfections, semirigid connections and lateral bracing on the stability and second-order behavior of multi-column systems.     

点支撑预应力中厚矩形板的弯曲

基于Reissner-Mindlin一阶剪切变形板理论，讨论在预加面内机械荷载或温度场作用下，点支撑中厚矩形板的弯曲问题。温度场假定沿板表面为均布，沿板厚方向为线性分布的。利用考虑剪切变形影响的Timoshenko梁函数，采用Rayleigh-Ritz法给出不同边界条件下点支撑中厚板在横向荷载作用下的挠度和弯矩分布。结果表明，均匀温度场与预加面内压力将使板的挠度和弯矩增加。支撑点位置的变化、边界约束条件和横向剪切变形效应都对板的内力大小和分布有显著影响。     

STUDY ON AEROTHERMOELASTICITY OF A HYPERSONIC ALL-MOVABLE CONTROL SURFACE

根据分层求解原理对考虑舵轴及舵轴与机身间隙影响下的高超声速飞行器全动舵面进行了热气动弹性分析. 采用计算流体力学（CFD）方法求解N-S 方程计算舵面周围的热环境,在该温度分布下根据结构壁面温度计算热流,应用傅里叶（Fourier）定律确定结构热传导过程及其内部温度分布,进而分析结构考虑热应力和温度对材料属性的影响下的模态固有特性,结合基于CFD 技术的当地流活塞理论,在状态空间中对舵面进行了热气动弹性分析. 结果表明,气动加热效应改变了结构的固有频率以及弯扭耦合频率之间的间距,进而改变了结构的颤振速度和颤振频率;随着热传导的进行,结构固有频率和颤振频率先快速减小后基本保持不变,弯扭耦合频率之间的间距和颤振速度则先快速减小后略有上升;舵轴及舵轴与机身间隙的存在对舵面的固有频率、颤振频率、颤振速度都产生了影响,使其最大下降了6%.     

NUMERICAL SIMULATION OF BROWNIAN COAGULATION AND MIXING OF NANOPARTICLES IN 2D RAYLEIGH-B?NARD CONVECTION

采用泰勒展开矩方法对二维瑞利-贝纳德热对流系统(1×10⁶ ≤Ra ≤1 ×10⁸) 中纳米颗粒群的混合和凝并特性进行了数值模拟. 结果显示颗粒群随时间演化经历了扩散阶段、混合阶段、充分混合阶段3 个阶段, 随着颗粒群混合和凝并的进行, 颗粒数目浓度减少, 颗粒群的平均体积增大; 得到了颗粒分布函数各特征量与温度相关系数以及各特征量的空间分布标准偏差在3 个阶段的不同特征; 得到了颗粒分布函数各阶矩以及平均体积长时间演化的渐近行为, 结果与零维渐近解析解一致. 最后, 本文进一步研究了无量纲数(包括瑞利数Ra, 斯密特数Sc_M, 达姆科勒数Da) 对颗粒群达到自保持分布时间的影响, 发现该时间随着Ra和Sc_M的增大呈对数率减小, 随着Da的增大呈线性增大     

Discrete element analysis of stone cantilever stairs

Stone cantilever staircases are present in case of both new constructions and reconstructions. The aim of the present paper is to understand the mechanical behaviour of these staircases with the help of discrete element simulations, and to compare the calculated behaviour to the estimations given by the existing manual calculation methods. First a literature review is presented on the statical calculation of cantilevered staircases: manual calculation methods suggested in the 1990s for straight and spiral staircases are introduced, focusing on Heyman’s theory and its improved counterparts. Then the discrete element method is used as a tool to perform virtual experiments, in order to evaluate the mechanical behaviour of the straight and spiral staircases for selfweight, live loads and support movement. The results obtained (internal forces, stresses, deflections) are then compared with the manual calculation results. The most important conclusions are: (1) the term “cantilever stair” is misleading: significant torsion moments occur in the treads, while the bending moments are much smaller than in a free cantilever; (2) the type of the connection between wall and treads (i.e. the end of the tread is simply supported by the wall against translation and torsion, or it is also partly clamped) has a fundamental influence on the internal forces and stress distributions; (3) for simply supported treads the existing manual methods are conservative for straight stairs, but for spiral stairs they dangerously underestimate the torsional moments.