THE DETERMINATION OF BUCKLING POINT AND CRITICAL LOAD OF COMPRESSIVE MEMBER

为了分析压杆失稳的临界力与失稳后杆件屈服形态的关系,在理论推导和试验研究的基础上,提出了通过捕捉细长压杆失稳时的失稳点来确定压杆临界力的分析方法,通过测量细长压杆失稳时微弯状态下杆端的纵向位移,求得临界压力的大小. 文中将该方法的实验结果与直接用欧拉公式计算的临界压力进行了比较,结果表明,考虑细长压杆微弯状态时杆端的纵向位移所得到的失稳的临界压力值大于利用欧拉公式计算的临界压力值.     

STUDY ON AMPLIFICATION FACTOR OF FLEXURAL BUCKLING CRITICAL LOAD OF AXIAL COMPRESSION BARS1)

为了建立一般条件下轴压构件屈曲临界载荷的计算理论,首先对轴心受压构件发生屈曲时的总势能方程进行了推导,然后采用Rayleigh-Ritz法并基于势能驻值原理得到了4种不同端部约束条件下轴压构件的屈曲临界载荷,对比欧拉临界载荷,给出了临界载荷放大系数 的计算式,全面考虑了构件长细比、压缩变形、剪切变形以及截面形状系数对临界载荷的影响,推导的计算式可用于较小长细比轴压构件发生屈曲时临界载荷的计算.圆截面和双轴对称工字形截面轴压构件屈曲临界载荷的分析表明构件长细比是影响放大系数的主导因素。     

局部径向载荷作用下外压薄壁圆筒稳定性分析

为简化真空塔器外挂件支撑区局部失稳分析,提炼出局部径向载荷作用下外压薄壁圆筒稳定性计算模型. 以易拉罐为薄壁圆筒试件,对不同外压下试件的局部径向临界载荷进行了测试. 利用有限元法对各实验模型进行了特征值屈曲分析,结果与实验数据能较好地吻合. 采用正交设计及参数化计算,得到了各结构参数及外压下的局部径向临界载荷经验公式. 实例计算表明,所得经验公式稍有保守,可用于真空塔器外挂件支撑件区的局部稳定性分析.     

预应力杂交结构的屈曲分析

含有预应力索的半刚性大跨度空间结构是一种非常有生命力的杂交钢结构形式,对应用日益广泛的空间杂交结构的正确分析是保证结构安全设计的前提,屈曲分析通常是这类结构分析的主要内容之一,结构的屈曲分析可分为特征值屈曲分析和非线性屈曲分析。论文首先阐述了结构特征值屈曲分析和非线性屈曲分析中的分枝屈曲分析的基本理论,提出了含有恒定荷载的预应力结构特征值的求解方法,明确正确应用屈曲理论对保证工程安全设计的重要性,然后应用有限元软件ANSYS对待建的安徽大学体育馆新型弦支网壳屋盖结构进行了特征值屈曲分析和分枝屈曲分析,提出应用通用有限元程序跟踪结构分枝屈曲路径的方法,本文结论对预应力杂交结构的屈曲分析具有指导意义。     

ANALYTICAL RELATIONS BETWEEN EIGENVALUES OF CIRCULAR PLATE BASED ON VARIOUS PLATE THEORIES

Based on the mathematical similarity of the axisymmetric eigenvalue problems of a circular plate between the classical plate theory(CPT), the first-order shear deformation plate theory(FPT) and the Reddy's third-order shear deformation plate theory (RPT), analytical relations between the eigenvalues of circular plate based on various plate theories are investigated. In the present paper, the eigenvalue problem is transformed to solve an algebra equation. Analytical relationships that are expressed explicitly between various theories are presented. Therefore, from these relationships one can easily obtain the exact RPT and FPT solutions of critical buckling load and natural frequency for a circular plate with CPT solutions. The relationships are useful for engineering application, and can be used to check the validity, convergence and accuracy of numerical results for the eigenvalue problem of plates.     

The torsional buckling of a cruciform column under compressive load with a vertex plasticity model

The torsional buckling of a plastically deforming cruciform column under compressive load is investigated. The problem is solved analytically based on the von Kármán shallow shell theory and the virtual work principle. Solutions found in the literature are extended for path-dependent incremental behaviour as typically found in the presence of the vertex effect that is present in metallic polycrystals.At the critical load for buckling the direction of straining changes by an additional shear component. It is shown that the incremental elastic–plastic moduli are spatially nonuniform for such situations, contrary to the classical J₂ flow and deformation theories. The critical shear modulus that governs the buckling equation is obtained as a weighted average of the incremental elastic–plastic moduli over the cross-section of the cruciform.Using a plasticity model proposed by the authors, that includes the vertex effect, the buckling-critical load is computed for a aluminium column both with the analytical model and a FEM-based eigenvalue buckling analysis. The stable post-buckling path is determined by the energy criterion of path-stability. A comparison with the experimentally obtained classical results by Gerard and Becker (1957) shows good agreement without relying on artificial imperfections as necessary in the classical J₂ flow theory.     

Koiter circles in the buckling of axially compressed conical shells

As is well known, the elastic stability of shell structures under certain loading conditions is characterised by a severely unstable postbuckling behaviour. The presence of simultaneous buckling modes (‘competing’ modes corresponding to the same critical buckling load) is deemed to be largely responsible for such a behaviour. In the present paper, within the framework of the so-called classical theory (linear bifurcation eigenvalue analysis), the buckling behaviour of axially compressed cylindrical shells is firstly reviewed. Accordingly, doubly periodic eigenvectors (buckling modes) corresponding to the same eigenvalue (critical buckling load) can be determined, and their locus in a dimensionless meridional and circumferential buckling wavenumber space is described by a circle (known as the Koiter circle). In the case of axially compressed conical shells, no clear evidence of the existence of simultaneous buckling modes can be found in the literature. Then, such a problem is studied here via linear eigenvalue finite element analyses, showing that simultaneous doubly periodic modes do also occur for cones, and that their locus in a specifically defined dimensionless wavenumber space can be described by an ellipse (hereafter termed as the Koiter ellipse) whose aspect ratio is dependent on the tapering angle of the cone.     

Buckling analysis of two layer delaminated beams with bridging

Stitching has been used as through-thickness reinforcement to reduce the effects of delamination. In stitching, the delamination will be held by stitches in the form of crack/interface bridging. In the present work, the reinforcement of stitching threads is assumed to provide continuous linear restoring tractions opposing the delamination opening. A generalized mathematical model is developed to study the buckling analysis of two layer delaminated beams with bridging by using Rayleigh–Ritz energy method. The delaminated beam is analyzed as four interconnected beams using the delamination as their boundary. Lagrange multipliers are used to enforce the boundary and continuity conditions between the junctions of the interconnected beams. The developed mathematical model is solved as an eigenvalue problem in which the lowest eigenvalue gives the buckling load. Effective-bridging modulus, a new nondimensionalized parameter, is introduced to study the influence of bridging on the delamination buckling. It is shown that bridging strongly influences the buckling load of the delaminated beams and a monotonic relation is observed between the buckling load and the effective-bridging modulus. Parametric studies in terms of delamination sizes and locations along spanwise and thicknesswise positions on the buckling load have been carried out. The bridging is found to be effective for shallow delaminations of moderate length, and for deep and long delaminations. Spanwise positions of delamination strongly influence the buckling loads. In addition, an analytical model for obtaining upper bounds of the buckling load is developed by using Euler–Bernoulli beam theory. Effective-slenderness ratio, a new nondimensionalized parameter is defined and it is found to be controlling the buckling mode configurations, i.e., local, global and mixed modes.     

An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates

In this article, an analytical solution for buckling of moderately thick functionally graded (FG) sectorial plates is presented. It is assumed that the material properties of the FG plate vary through the thickness of the plate as a power function. The stability equations are derived according to the Mindlin plate theory. By introducing four new functions, the stability equations are decoupled. The decoupled stability equations are solved analytically for both sector and annular sector plates with two simply supported radial edges. Satisfying the edges conditions along the circular edges of the plate, an eigenvalue problem for finding the critical buckling load is obtained. Solving the eigenvalue problem, the numerical results for the critical buckling load and mode shapes are obtained for both sector and annular sector plates. Finally, the effects of boundary conditions, volume fraction, inner to outer radius ratio (annularity) and plate thickness are studied. The results for critical buckling load of functionally graded sectorial plates are reported for the first time and can be used as benchmark.     

Axisymmetric static and dynamic buckling of hollow microspheres

Syntactic foams are particulate composites that are obtained by dispersing thin hollow inclusions in a matrix material. The wide spectrum of applications of these composites in naval and aerospace structures has fostered a multitude of theoretical, numerical, and experimental studies on the mechanical behavior of syntactic foams and their constituents. In this work, we study static and dynamic axisymmetric buckling of single hollow spherical particles modeled as non-linear thin shells. Specifically, we compare theoretical predictions obtained by using Donnell, Sanders–Koiter, and Teng–Hong non-linear shell theories. The equations of motion of the particle are obtained from Hamilton׳s principle, and the Galerkin method is used to formulate a tractable non-linear system of coupled ordinary differential equations. An iterative solution procedure based on the modified Newton–Raphson method is developed to estimate the critical static load of the microballoon, and alternative methodologies of reduced complexity are further discussed. For dynamic buckling analysis, a Newmark-type integration scheme is integrated with the modified Newton–Raphson method to evaluate the transient response of the shell. Results are specialized to glass particles, and a parametric study is conducted to investigate the effect of microballoon wall thickness on the predictions of the selected non-linear shell theories. Comparison with finite element predictions demonstrates that Sanders–Koiter theory provides accurate estimates of the static critical load for a wide set of particle wall thicknesses. On the other hand, Donnell and Teng–Hong theories should be considered valid only for very thin particles, with the latter theory generally providing better agreement with finite element findings due to its more complete kinematics. In this context, we also demonstrate that a full non-linear analysis is required when considering thicker shells, while simplified treatment can be utilized for thin particles. For dynamic buckling, we confirm the accuracy of Sanders–Koiter theory for all the considered particle thicknesses and of Teng–Hong and Donnell theories for very thin particles.     

THE TRANSVERSE NONLINEAR FREE VIBRATION AND THE BUCKLING OF A COMPRESSIVE BAR ON AN ELASTIC FOUNDATION

基于Hamilton 原理,运用假设时间模态法,得到了弹性基础上压杆的横向非线性自由振动与屈曲的位移型常微分控制方程. 考虑一端固定另一端可移简支边界条件,采用打靶法得到了结构第一至第三阶结构频率与一阶屈曲载荷的数值结果. 结果表明：随轴心压力增加,结构频率减小;随弹性基础刚度增加,结构频率与屈曲载荷均增加;弹性基础刚度对结构频率的影响随振型阶数增加在减小;在小振幅的情形下,不同振型对一阶屈曲载荷的影响很小.     

Hamilton体系下功能梯度梁的热冲击动力屈曲分析

在Hamilton体系下,基于Euler梁理论研究了功能梯度材料梁受热冲击载荷作用时的动力屈曲问题;将非均匀功能梯度复合材料的物性参数假设为厚度坐标的幂函数形式,采用Laplace变换法和幂级数法解析求得热冲击下功能梯度梁内的动态温度场:首先将功能梯度梁的屈曲问题归结为辛空间中系统的零本征值问题,梁的屈曲载荷与屈曲模态分别对应于Hamilton体系下的辛本征值和本征解问题,由分叉条件求得屈曲模态和屈曲热轴力,根据屈曲热轴力求解临界屈曲升温载荷。给出了热冲击载荷作用下一类非均匀梯度材料梁屈曲特性的辛方法研究过程,讨论了材料的梯度特性、结构几何参数和热冲击载荷参数对临界温度的影响。     

夹层FGM圆柱壳在扭转载荷作用下的弹性稳定性

采用半解析方法研究了两端简支的功能梯度夹层圆柱壳在端部扭转载荷作用下的弹性稳定性.考虑圆柱壳的里外表层为均匀材料,中间层为材料性质沿厚度方向连续变化的功能梯度材料,并且在界面处的材料性质保持连续. 基于Flügge薄壳理论,建立了位移形式的结构静态屈曲控制方程.根据边界条件将位移表示为三角级数形式,获得包含柱壳端部扭转载荷参数的近似线性代数特征值问题,并通过数值方法求得了表征结构失稳特征的临界载荷. 数值结果表明,临界载荷随着半径与厚度比的增加而减小,随着功能梯度中间层的弹性模量的平均值的增加而增加.      

A p-TYPE SUPERCONVERGENT RECOVERY METHOD FOR FE ELASTIC STABILITY ANALYSIS OF EULER BEAMS1)

本文将有限元p型超收敛算法应用于欧拉梁弹性稳定分析。该法基于有限元解答中失稳载荷和失稳模态结点位移的超收敛特性,建立了单元上失稳模态近似满足的线性常微分方程边值问题,在每个单元上,对该边值问题采用一个高次元进行求解,获得失稳模态的超收敛解,再将失稳模态的超收敛解代入瑞利商的解析表达式,最终获得失稳载荷的超收敛解。该法思路简明,通过少量计算即可显著提高失稳载荷和失稳模态的精度与收敛阶。数值算例表明,该法高效、可靠,值得进一步研究和推广到各类杆系结构。     

Plastic buckling analysis of thick plates using p-Ritz method

This paper is concerned with the application of the p-Ritz method for the plastic buckling analysis of thick plates. In order to allow for the effect of transverse shear deformation in thick plates, the Mindlin plate theory is adopted. The plastic buckling behaviour of the plate is captured by using the incremental and deformation theories of plasticity. The material property of the plate is assumed to obey the Ramberg–Osgood stress–strain relation. The p-Ritz method will be applied to obtain the governing eigenvalue equation for the plastic buckling analysis of uniformly stressed plates with edges defined by polynomial functions. In the p-Ritz method, the displacement functions of the plate are approximately represented by the product of mathematically complete two-dimensional polynomial functions and boundary equations raised to appropriate powers that ensure the satisfaction of the geometric boundary conditions. The validity, convergence and accuracy of the method were demonstrated for various plate shapes such as rectangular, triangular and elliptical shapes. A parametric study was also undertaken to study the plastic buckling behaviour and the effect of transverse shear deformation.     

Buckling of a flush-mounted plate in simple shear flow

The buckling of an elastic plate with arbitrary shape flush-mounted on a rigid wall and deforming under the action of a uniform tangential load due to an overpassing simple shear flow is considered. Working under the auspices of the theory of elastic instability of plates governed by the linear von Kármán equation, an eigenvalue problem is formulated for the buckled state resulting in a fourth-order partial differential equation with position-dependent coefficients parameterized by the Poisson ratio. The governing equation also describes the deformation of a plate clamped around the edges on a vertical wall and buckling under the action of its own weight. Solutions are computed analytically for a circular plate by applying a Fourier series expansion to derive an infinite system of coupled ordinary differential equations and then implementing orthogonal collocation, and numerically for elliptical and rectangular plates by using a finite-element method. The eigenvalues of the resulting generalized algebraic eigenvalue problem are bifurcation points in the solution space, physically representing critical thresholds of the uniform tangential load above which the plate buckles and wrinkles due to the partially compressive developing stresses. The associated eigenfunctions representing possible modes of deformation are illustrated, and the effect of the Poisson ratio and plate shape is discussed.     

Buckling of long, regular trusses

The buckling of pin-jointed trusses due to axial end loading is examined using finite difference calculus. Exact solutions are found from which approximate formulae are derived which may be compared with the critical loads for analogous columns buckling due to bending and shear. These are found to differ from previously proposed analogies which were established on an intuitive basis. The possibility of analogies for the lateral buckling of trusses is also examined.     

桁架结构稳定分析的几何非线性欧拉稳定理论

目前,桁架结构稳定分析有两个理论:经典的特征值理论和几何非线性临界点理论。前者发展较早,在许多结构力学书中都有叙述。但是经过工程应用检验,它过高地估计了结构抗稳定的能力。后者是20年前提出的,提出者认为适用于所有的扁桁架。经过几年的研究,作者连续提出三个稳定理论:线性与非线性欧拉理论;非线性临界点-欧拉理论和两个计算方法,进行桁架结构的线性和非线性截面优化设计。经过理论研究和对前人文献中数值例题的计算和比较,发现特征值理论不符合实际,临界点理论只适用于大扁度的桁架,而不适用于一切扁桁架。研究结果提供了若干有用的结论,给出了各种稳定理论的适用范围,指出了国际文献中若干例题的正确和错误,补充了桁架结构的稳定分析理论,使之更为完整和实用了。     

THERMOELASTIC VIBRATION OF FLUID-CONVEYING MICROTUBES EMBEDDED IN ELASTIC MEDIUMS

研究热环境中被弹性介质包围的微米输流管道的横向振动问题. 根据Hamilton 原理及非线性热弹性理论建立管道横向振动控制方程,并利用复模态法对其进行求解,得到了系统的固有频率和屈曲失稳临界流速,讨论了环境温度和一些重要系统参数对管道振动特性的影响. 研究结果表明:环境温度变化、管道和流体的微尺度效应、管道外径及弹性介质刚度对输流微管道固有频率和临界流速都有很大影响.