Analytical solution for functionally graded anisotropic cantilever beam subjected to linearly distributed load

The bending problem of a functionally graded anisotropic cantilever beam subjected to a linearly distributed load is investigated.The analysis is based on the exact elasticity equations for the plane stress problem.The stress function is introduced and assumed in the form of a polynomial of the longitudinal coordinate.The expressions for stress components are then educed from the stress function by simple differentiation. The stress function is determined from the compatibility equation as well as the bound- ary conditions by a skilful deduction.The analytical solution is compared with FEM calculation,indicating a good agreement.     

On the displacement potential solution of plane problems of structural mechanics with mixed boundary conditions

The present paper describes the advancement of displacement potential approach in relation to solution of plane problems of structural mechanics with mixed mode of boundary conditions. Both the conditions of the plane stress and the plane strain are considered for analyzing the displacement and stress fields of the structural problem. Using the finite difference technique based on the present displacement potential approach for the case of the plane stress and the plane strain conditions, firstly an elastic cantilever beam subjected to a pure shear at its tip is solved and these two solutions (plane stress and plane strain) are compared with Timoshenko and Goodier cantilever beam bending solutions (Theory of elasticity, 2nd edn. McGraw-Hill, New York, 1951); secondly the above-mentioned displacement potential approach for the case of the plane stress and the plane strain conditions are applied to solve a one-end fixed square plate subjected to a combined loading at its tip. Effects of plane stress and plane strain on the elastic field of the plate are discussed in a comparative fashion. Limitations of Timoshenko and Goodier cantilever beam bending solutions (Theory of elasticity, 2nd edn. McGraw-Hill, New York, 1951) over the displacement potential approach for the case of the plane stress and the plane strain conditions are not only discussed but also the superiority of the present displacement potential approach for the case of the plane stress and the plane strain conditions are reflected in the present research work.     

A higher-order theory for static and dynamic analyses of functionally graded beams

The higher-order theory is extended to functionally graded beams (FGBs) with continuously varying material properties. For FGBs with shear deformation taken into account, a single governing equation for an auxiliary function F is derived from the basic equations of elasticity. It can be used to deal with forced and free vibrations as well as static behaviors of FGBs. A general solution is constructed, and all physical quantities including transverse deflection, longitudinal warping, bending moment, shear force, and internal stresses can be represented in terms of the derivatives of F. The static solution can be determined for different end conditions. Explicit expressions for cantilever, simply supported, and clamped-clamped FGBs for typical loading cases are given. A comparison of the present static solution with existing elasticity solutions indicates that the method is simple and efficient. Moreover, the gradient variation of Young’s modulus and Poisson’s ratio may be arbitrary functions of the thickness direction. Functionally graded Rayleigh and Euler–Bernoulli beams are two special cases when the shear modulus is sufficiently high. Moreover, the classical Levinson beam theory is recovered from the present theory when the material constants are unchanged. Numerical computations are performed for a functionally graded cantilever beam with a gradient index obeying power law and the results are displayed graphically to show the effects of the gradient index on the deflection and stress distribution, indicating that both stresses and deflection are sensitive to the gradient variation of material properties.     

Analytical solution of a bilayer functionally graded cantilever beam with concentrated loads

A general two-dimensional solution for a bilayer functionally graded cantilever beam with concentrated loads at the free end is developed. The beam is treated as a nonhomogeneous plane stress problem, and the elastic modulus of each graded layer varies with the thickness as an arbitrary function, respectively, which makes this analytical solution has a wider application than the solutions only considering FGMs as core materials or modeling the face sheets by Euler beam theory. It can be verified the paper’s close solution coincides with the classical one for beams while let the elastic modulus be constants. The methodology presented here could be easily extended to analyze the functionally graded sandwich beams.     

Axisymmetric bending analysis of thick functionally graded circular plates using fourth-order shear deformation theory

In the present article, axisymmetric bending and stretching of functionally graded (FG) circular plates subjected to uniform transverse loading based on fourth-order shear deformation plate theory (FOST) have been studied. Using a fourth-order shear deformation theory, the solutions for deflection and rotation functions of FG plates are presented in terms of the corresponding quantities for a homogeneous plate using the classical plate theory (CPT), from which solutions one can easily obtain the FOST solutions for axisymmetric bending of FG circular plates. It is assumed that the effective mechanical properties of the functionally graded plates through the thickness are continuous functions of the volume fractions of the constituent parts which are themselves defined by a power-law function. Numerical results for maximum deflection and shear stress are presented for various percentages of ceramic–metal volume fractions. These results are also compared with those obtained from the first-order shear deformation plate theory of Mindlin (FST), the third-order shear deformation plate theory of Reddy (TST) as well as the exact three-dimensional elasticity solution. It is found that although the maximum deflections obtained using FOST and TST are close to each other, the through-thickness shear stress is predicted more accurately by the FOST formulation than by the TST.     

Static analysis of anisotropic functionally graded magneto-electro-elastic beams subjected to arbitrary loading

This paper considers the analytical and semi-analytical solutions for anisotropic functionally graded magneto-electro-elastic beams subjected to an arbitrary load, which can be expanded in terms of sinusoidal series. For the generalized plane stress problem, the stress function, electric displacement function and magnetic induction function are assumed to consist of two parts, respectively. One is a product of a trigonometric function of the longitudinal coordinate (x) and an undetermined function of the thickness coordinate (z), and the other a linear polynomial of x with unknown coefficients depending on z. The governing equations satisfied by these z-dependent functions are derived. The analytical expressions of stresses, electric displacements, magnetic induction, axial force, bending moment, shear force, average electric displacement, average magnetic induction, displacements, electric potential and magnetic potential are then deduced, with integral constants determinable from the boundary conditions. The analytical solution is derived for beam with material coefficients varying exponentially along the thickness, while the semi-analytical solution is sought by making use of the sub-layer approximation for beam with an arbitrary variation of material parameters along the thickness. The present analysis is applicable to beams with various boundary conditions at the two ends. Two numerical examples are presented for validation of the theory and illustration of the effects of certain parameters.     

均布荷载作用下功能梯度悬臂梁弯曲问题的解析解

采用弹性力学半逆解法,假设所有材料常数沿梁厚度方向按同一函数规律变化,求得了功能梯度悬臂梁在均布载荷作用下的解析解.该解退化到各向同性均匀弹性情况时与已有的理论解相一致.对弹性模量按指数函数梯度变化的算例进行了分析.所得到的解对任意梯度函数均成立,可作为数值解以及简化理论的检验依据.     

均布荷载作用下功能梯度简支梁弯曲的解析解

利用应力函数半逆解法,研究了均布载荷作用下、材料属性在厚度上任意变化的功能梯度简支梁弯曲的解析解,给出了各向应力应变与位移的解析显式表达式.首先根据平面应力状态的基本方程,得出了功能梯度梁的应力函数应满足的偏微分方程,并根据应力边界条件得出了各应力分布的表达式;进而根据功能梯度材料的本构方程和位移边界条件,得出了应变和位移的分布.最后,通过将本文的解退化到均质各向同性梁并与经典弹性解比较,证明了本文理论的正确性,并求解了材料组分呈幂律分布的功能梯度梁的应力和位移分布,分析了上下表层材料的弹性模量比λ与组分材料体积分数指数n对应力和位移分布的影响.     

任意光滑梯度变化的功能梯度材料纯弯曲梁的弹塑性分析

假设功能梯度材料为理想弹塑性材料,其屈服强度和弹性模量均沿梁的高度方向按任意光滑函数连续变化,在小变形及平截面假定下,导出了功能梯度材料纯弯曲梁弹性极限弯矩及塑性极限弯矩的解析表达式,建立了弹塑性应力状态下截面弯矩和截面的弹、塑性应力分布之间的解析关系．研究表明,功能梯度材料梁存在多种可能的屈服模式,其最先屈服的点不一定位于截面应力最大处,而可能位于截面的其他任意位置;屈服强度及弹性模量的梯度变化对梁的弹塑性力学性能有很大影响．研究结果可为功能梯度材料纯弯曲梁的弹塑性问题研究提供一定的参考．     

Analytical solutions for single- and multi-span functionally graded plates in cylindrical bending

A recently developed plate theory using the concept of shape function of the transverse coordinate parameter is extended to determine the stress distribution in an orthotropic functionally graded plate subjected to cylindrical bending. The transfer matrix method is presented to derive the shape function. The equations governing the plate deformation are then solved analytically using the transfer matrix method for arbitrary boundary conditions. For a simply supported functionally graded plate, a comparison of the present solution with the exact elasticity solution, the first- and third-order shear deformation plate theories is presented and discussed. It is demonstrated that the present method yields more accurate stresses than the first- and third-order shear deformation theories. The effect of boundary conditions and inhomogeneity of material on the displacements and stresses in functionally graded plates are investigated. A multi-span functionally graded plate with arbitrary boundary conditions is further considered to demonstrate the efficiency of the present method.     

Nonlocal theory solution of two collinear cracks in the functionally graded materials

In this paper, the interaction of two collinear cracks in functionally graded materials subjected to a uniform anti-plane shear loading is investigated by means of nonlocal theory. The traditional concepts of the nonlocal theory are extended to solve the fracture problem of functionally graded materials. To make the analysis tractable, it is assumed that the shear modulus varies exponentially with the coordinate vertical to the crack. By use of the Fourier transform, the problem can be solved with the help of a pair of triple integral equations, in which the unknown variable is the displacement on the crack surfaces. To solve the triple integral equations, the displacement on the crack surfaces is expanded in a series of Jacobi polynomials. Unlike the classical elasticity solutions, it is found that no stress singularity is present near the crack tips. The nonlocal elastic solutions yield a finite hoop stress at the crack tip, thus allowing us to use the maximum stress as a fracture criterion in functionally graded materials. The magnitude of the finite stress field depends on the crack length, the distance between two cracks, the parameter describing the functionally graded materials and the lattice parameter of the materials.     

非保守功能梯度弹性组合曲梁的精确模型及其数值解

基于直法线假设,采用可伸长梁的几何非线性理论,建立了功能梯度材料弹性组合曲梁受切线均布随从力作用下的静态大变形数学模型。该模型不仅计及了轴线伸长,同时也精确地考虑了梁的初始曲率对变形的影响以及轴向变形与弯曲变形之间的耦合效应。用打靶法数值求解了由金属和陶瓷两相材料所构成的一种FGM组合曲梁在沿轴线均布切向随动载荷作用下的非线性平面弯曲问题,给出了不同梯度指标下FGM弹性曲梁随载荷参数大范围变化的平衡路径,并与金属和陶瓷两种单相材料曲梁的相应特性进行了比较。     

A Hamiltonian State Space Approach for 3D Analysis of Circular Cantilevers

A 3D exact analysis of extension, torsion and bending of a cantilever of a circular cross section is studied with emphasis on the fixed-end effect. Through Hamiltonian variational formulation, the basic equations of elasticity in cylindrical coordinates and the boundary conditions of the problem are formulated into the state space setting in which the state vector comprises the displacement vector and the conjugate stress vector as the dual variables. Upon delineating the Hamiltonian characteristics of the system, 3D solutions for transversely isotropic circular cantilevers subjected to an axial force, a torque, terminal couples and transverse forces are determined, thereby, the fixed-end effects and applicability of the solutions of generalized plane strains and the elementary theory of bending of beams are evaluated.     

Energy-consistent shear coefficients for beams with circular cross sections and radially inhomogeneous materials

An exact computational method for the shear stiffness of beams with circular cross sections and arbitrarily radially inhomogeneous Young’s modulus is presented. We derive the displacement and stress field of a cantilever beam according to 3D theory of elasticity, which requires to solve just a 1D linear boundary value problem. The shear stiffness is obtained by setting the shear strain energy from the exact solution equal to that from technical beam theory. Results and closed analytical formulae are given for several functionally graded and layered cross sections.     

Theoretical analysis on elastic buckling of nanobeams based on stress-driven nonlocal integral model

Several studies indicate that Eringen's nonlocal model may lead to some inconsistencies for both Euler-Bernoulli and Timoshenko beams, such as cantilever beams subjected to an end point force and fixed-fixed beams subjected a uniform distributed load. In this paper, the elastic buckling behavior of nanobeams, including both EulerBernoulli and Timoshenko beams, is investigated on the basis of a stress-driven nonlocal integral model. The constitutive equations are the Fredholm-type integral equations of the first kind, which can be transformed to the Volterra integral equations of the first kind. With the application of the Laplace transformation, the general solutions of the deflections and bending moments for the Euler-Bernoulli and Timoshenko beams as well as the rotation and shear force for the Timoshenko beams are obtained explicitly with several unknown constants. Considering the boundary conditions and extra constitutive constraints, the characteristic equations are obtained explicitly for the Euler-Bernoulli and Timoshenko beams under different boundary conditions, from which one can determine the critical buckling loads of nanobeams. The effects of the nonlocal parameters and buckling order on the buckling loads of nanobeams are studied numerically, and a consistent toughening effect is obtained.     

粘贴压电层功能梯度材料Timoshenko梁的热过屈曲分析

研究了上下表面粘贴压电层的功能梯度材料Timoshenko梁在升温及电场作用下的过屈曲行为。在精确考虑轴线伸长和一阶横向剪切变形的基础上,建立了压电功能梯度Timoshenko层合梁在热-电-机械载荷作用下的几何非线性控制方程。其中,假设功能梯度的材料性质沿厚度方向按照幂函数连续变化,压电层为各向同性均匀材料。采用打靶法数值求解所得强非线性边值问题,获得了在均匀电场和横向非均匀升温场内两端固定Timoshenko梁的静态非线性屈曲和过屈曲数值解。并给出了梁的变形随热、电载荷及材料梯度参数变化的特性曲线。结果表明,通过施加电压在压电层产生拉应力可以有效地提高梁的热屈曲临界载荷,延缓热过屈曲发生。由于材料在横向的非均匀性,即使在均匀升温和均匀电场作用下,也会产生拉-弯耦合效应。但是对于两端固定的压电-功能梯度材料梁,在横向非均匀升温下过屈曲变形仍然是分叉形的。     

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。     

On the solution singularity in the plane elasticity problem for a cantilever strip

The plane elasticity problem of bending of a cantilever strip whose material is assumed to be incompressible in the transverse direction is solved. It is shown that, in the classical statement of of the boundary condition for the fixed edge of the strip, the solution has a singularity at the corner points of the edge. Several cases of the strip fixation and loading characterized by the presence or absence of the solution singularity are considered. The strength of glass beams of three types, for which the theory of elasticity predicts whether the normal stress has a singularity, is studied experimentally. It is shown that the limit stresses for the beams of the types under study are practically the same, which testifies that the solution singularity does not have any physical nature.     

线性分布荷载作用下梯度功能压电悬臂梁的解

采用逆解法求解了上表面受线性分布荷载作用的压电悬臂梁执行器，其中体积力$F_z$ 呈非线性分布. 首先确定了应力函数和电位移函数的多项式表达式，进而研究了该问题的 通解，以及体积力的不同分布对解答的影响. 常体积力和无体力情况下的解可以由上述 解直接得到. 本文为研究其它类型的压电梯度微观结构提供了一种可行的方法.