MHD free convective flow and mass transfer over a stretching sheet with chemical reaction

The effect of chemical reaction on free convective flow and mass transfer of a viscous, incompressible and electrically conducting fluid over a stretching surface is investigated in the presence of a constant transverse magnetic field. The non-linear boundary layer equations with the boundary conditions are transferred by a similarity transformation into a system of non-linear ordinary differential equations with the appropriate boundary conditions. Furthermore, the similarity equations are solved numerically by using a fourth order Runge-Kutta scheme with the shooting method. Numerical results of the skin friction coefficient, the local Nusselt number Nu, the local Sherwood number Sh, as will as the velocity, temperature and concentration profiles are presented for gases with a Prandtl number of 0.71 for various values of chemical reaction parameter, order of reaction, magnetic parameter and Schmidt number.     

Effect of temperature dependent viscosity on revolving axi-symmetric ferrofluid flow with heat transfer

The prime objective of the present study is to examine the effect of temperature dependent viscosity μ(T) on the revolving axi-symmetric laminar boundary layer flow of an incompressible, electrically non-conducting ferrofluid in the presence of a stationary plate subjected to a magnetic field and maintained at a uniform temperature. To serve this purpose, the non-linear coupled partial differential equations are firstly converted into the ordinary differential equations using well-known similarity transformations. The popular finite difference method is employed to discretize the non-linear coupled differential equations. These discretized equations are then solved using the Newton method in MATLAB, for which an initial guess is made with the help of the Flex PDE Solver. Along with the velocity profiles, the effects of temperature dependent viscosity are also examined on the skin friction, the heat transfer, and the boundary layer displacement thickness. The obtained results are presented numerically as well as graphically.     

Natural convection flow of a couple stress fluid between two vertical parallel plates with Hall and ion-slip effects

The Hall and ion-slip effects on fully developed electrically conducting couple stress fluid flow between vertical parallel plates in the presence of a temperature dependent heat source are investigated. The governing non-linear partial differential equations are transformed into a system of ordinary differential equations using similarity transformations. The resulting equations are then solved using the homotopy analysis method (HAM). The effects of the magnetic parameter, Hall parameter, ion-slip parameter and couple stress fluid parameter on velocity and temperature are discussed and shown graphically.     

On axisymmetric flow of Sisko fluid over a radially stretching sheet

This study presents an analysis of the axisymmetric flow of a non-Newtonian fluid over a radially stretching sheet. The momentum equations for two-dimensional flow are first modeled for Sisko fluid constitutive model, which is a combination of power-law and Newtonian fluids. The general momentum equations are then simplified by invoking the boundary layer analysis. Then a non-linear ordinary differential equation governing the axisymmetric boundary layer flow of Sisko fluid over a radially stretching sheet is obtained by introducing new suitable similarity transformations. The resulting non-linear ordinary differential equation is solved analytically via the homotopy analysis method (HAM). Closed form exact solution is then also obtained for the cases n=0 and 1. Analytical results are presented for the velocity profiles for some values of governing parameters such as power-law index, material parameter and stretching parameter. In addition, the local skin friction coefficient for several sets of the values of physical parameter is tabulated and analyzed. It is shown that the results presented in this study for the axisymmetric flow over a radially non-linear stretching sheet of Sisko fluid are quite general so that the corresponding results for the Newtonian fluid and the power-law fluid can be obtained as two limiting cases.     

Flow and heat transfer over an unsteady stretching surface with Hall effect

The present investigation is concerned with the effect of Hall currents on the flow and heat transfer of an electrically conducting fluid over an unsteady stretching surface in presence of a strong magnetic field. The induced magnetic field is neglected while the electron-atom collision frequency is assumed to be relatively high, so that the Hall effect is assumed to exist. The incorrect similarity transformation of Elbashbeshy and Bazid (Heat Mass Transfer 41:1–4, 2004). is corrected and a physically realistic distribution of the velocity and temperature is obtained. Using a similarity transformation the governing time dependent boundary layer equations for momentum and thermal energy are reduced to a set of coupled ordinary differential equations which are then solved numerically by the shooting method. Effects of the magnetic field, M , Hall parameter, m, and the unsteadiness parameter, S, on the velocity and temperature profiles as well as the local skin friction coefficients and the heat transfer rate are shown graphically.     

MHD stagnation point flow of a micropolar fluid towards a heated surface

The problem of two dimensional stagnation point flow of an electrically conducting micropolar fluid impinging normally on a heated surface in the presence of a uniform transverse magnetic field is analyzed. The governing continuity, momentum, angular momentum, and heat equations together with the associated boundary conditions are reduced to dimensionless form using suitable similarity transformations. The reduced self similar non-linear equations are then solved numerically by an algorithm based on the finite difference discretization. The results are further refined by Richardson’s extrapolation. The effects of the magnetic parameter, the micropolar parameters, and the Prandtl number on the flow and temperature fields are predicted in tabular and graphical forms to show the important features of the solution. The study shows that the velocity and thermal boundary layers become thinner as the magnetic parameter is increased. The micropolar fluids display more reduction in shear stress as well as heat transfer rate than that exhibited by Newtonian fluids, which is beneficial in the flow and thermal control of polymeric processing.     

Hall effect on MHD free convection boundary layer flow past a vertical flat plate

Effects of Hall current on MHD free convection boundary layer flow of a viscous incompressible electrically conducting fluid past a heated vertical flat plate of finite dimension in the presence of a uniform transverse magnetic field have been studied. An exact solution of the governing equations describing the flow has been obtained. The velocity field, induced magnetic field and bulk temperature distributions in the boundary layer flow have been discussed. It is found that the velocity components increase with an increase in Hall parameter. It is noticed that the induced magnetic field components are radically influenced by the Hall parameter. It is also found that the magnitude of bulk temperature in the x-direction decreases with an increase in either Hall parameter or magnetic parameter. On the other hand, the magnitude of the bulk temperature in the z-direction increases with an increase in Hall parameter whereas it decreases with an increase in magnetic parameter.     

Effect of Hall current on MHD natural convection flow from vertical permeable fiat plate with uniform surface heat flux

The effect of the Hall current on the magnetohydrodynamic (MHD) natural convection flow from a vertical permeable flat plate with a uniform heat flux is analyzed in the presence of a transverse magnetic field.It is assumed that the induced magnetic field is negligible compared with the imposed magnetic field.The boundary layer equations are reduced to a suitable form by employing the free variable formulation (FVF) and the stream function formulation (SFF).The parabolic equations obtained from FVF are numerically integrated with the help of a straightforward finite difference method.Moreover,the nonsimilar system of equations obtained from SFF is solved by using a local nonsimilarity method,for the whole range of the local transpiration parameter ζ.Consideration is also given to the regions where the local transpiration parameter ζis small or large enough.However,in these particular regions,solutions are acquired with the aid of a regular perturbation method.The effects of the magnetic field M and the Hall parameter m on the local skin friction coefficient and the local Nusselt number coefficient are graphically shown for smaller values of the Prandtl number Pr (=0.005,0.01,0.05).Furthermore,the velocity and temperature profiles are also drawn from various values of the local transpiration parameterζ.     

Effect of Hall current on MHD mixed convection boundary layer flow over a stretched vertical flat plate

In this paper, the steady magnetohydrodynamic (MHD) mixed convection boundary layer flow of an incompressible, viscous and electrically conducting fluid over a stretching vertical flat plate is theoretically investigated with Hall effects taken into account. The governing equations are solved numerically using an implicit finite-difference scheme known as the Keller-box method. The effects of the magnetic parameter, the Hall parameter and the buoyancy parameter on the velocity profiles, the cross flow velocity profiles and the temperature profiles are presented graphically and discussed. Investigated results indicate that the Hall effect on the temperature is small, and the magnetic field and Hall currents produce opposite effects on the shear stress and the heat transfer at the stretching surface.     

Effects of slip and heat transfer analysis of flow over an unsteady stretching surface

In this paper, viscous flow and heat transfer over an unsteady stretching surface is investigated with slip conditions. A system of non-linear partial differential equations is derived and transformed to ordinary differential equations with help of similarity transformations. Numerical computations are carried out for different values of the parameters involved and the analysis of the results obtained shows that the flow field is influenced appreciably by the unsteadiness, and the velocity slip parameter. With increasing values of the unsteadiness parameter, fluid velocity and the temperature are found to decrease in both the presence and absence of slip at the boundary. Fluid velocity decreases due to increasing values of the velocity slip parameter resulting in an increase in the temperature field. Skin-friction decreases with the velocity slip parameter whereas it increases with unsteadiness parameter. The rate of heat transfer decreases with the velocity slip parameter while increases with unsteadiness parameter. Same feature is also noticed for thermal slip parameter.     

Free-convection flow about a wedge under mixed thermal boundary conditions and a magnetic field

A similarity analysis was performed to investigate the laminar free-convection boundary-layer flow in the presence of a transverse magnetic field over a wedge with mixed thermal boundary conditions. Boundary-layer velocity and temperature profiles were determined numerically for various values of the Prandtl number and the magnetic parameter. The results show that the magnetic field retards the velocity profiles and increases the skin friction. The temperature profiles were expanded with increasing values of the magnetic parameter resulting in higher surface temperatures. A transformation relating the similarity solutions of the boundary-layer velocity and temperature profiles associated with different values of the mixed thermal boundary condition parameter was obtained.     

Effect of Hall current on MHD natural convection flow from vertical permeable flat plate with uniform surface heat flux

The effect of the Hall current on the magnetohydrodynamic (MHD) natural convection flow from a vertical permeable flat plate with a uniform heat flux is analyzed in the presence of a transverse magnetic field. It is assumed that the induced magnetic field is negligible compared with the imposed magnetic field. The boundary layer equations are reduced to a suitable form by employing the free variable formulation (FVF) and the stream function formulation (SFF). The parabolic equations obtained from FVF are numerically integrated with the help of a straightforward finite difference method. Moreover, the nonsimilar system of equations obtained from SFF is solved by using a local nonsimilarity method, for the whole range of the local transpiration parameter ζ. Consideration is also given to the regions where the local transpiration parameter ζ is small or large enough. However, in these particular regions, solutions are acquired with the aid of a regular perturbation method. The effects of the magnetic field M and the Hall parameter m on the local skin friction coefficient and the local Nusselt number coefficient are graphically shown for smaller values of the Prandtl number Pr (= 0.005, 0.01, 0.05). Furthermore, the velocity and temperature profiles are also drawn from various values of the local transpiration parameter ζ.     

Lie group analysis for thermophoretic and radiative augmentation of heat and mass transfer in a Brinkman-Darcy flow over a flat surface with heat generation

A boundary layer analysis is presented to investigate numerically the effects of radiation,thermophoresis and the dimensionless heat generation or absorption on hydromagnetic flow with heat and mass transfer over a flat surface in a porous medium.The boundary layer equations are transformed to non-linear ordinary differential equations using scaling group of transformations and they are solved numerically by using the fourth order Runge-Kutta method with shooting technique for some values of physical parameters.Comparisons with previously published work are performed and the results are found to be in very good agreement.Many results are obtained and a representative set is displayed graphically to illustrate the influence of the various parameters on the dimensionless velocity,temperature and concentration profiles as well as the local skin-friction coefficient,wall heat transfer,particle deposition rate and wall thermophoretic deposition velocity.The results show that the magnetic field induces acceleration of the flow,rather than deceleration(as in classical magnetohydrodynamics(MHD) boundary layer flow) but to reduce temperature and increase concentration of particles in boundary layer.Also,there is a strong dependency of the concentration in the boundary layer on both the Schmidt number and mass transfer parameter.     

Influence of chemical reaction on heat and mass transfer of non-Newtonian fluid with yield stress by free convection from vertical surface in porous medium considering Soret effect

The effect of chemical reaction on free convection heat and mass transfer for a non-Newtonian power law fluid over a vertical flat plate embedded in a fluid-saturated porous medium has been studied in the presence of the yield stress and the Soret effect. The governing boundary layer equations and boundary conditions are cast into a dimen- sionless form by similarity transformations, and the resulting system of equations is solved by a finite difference method. The results are preSented and discussed for concentration profiles, as well as the Nusselt number and the Sherwood number for various values of the parameters, which govern the problem. The results obtained show that the flow field is influenced appreciably by the presence of the chemical reaction parameter γ the order of.the chemical reaction parameter m, the Soret number St, the buoyancy ratio N, the Lewis number Le, and the dimensionless rheological parameter Ω.     

Melting heat transfer effects on stagnation point flow of micropolar fluid saturated in porous medium with internal heat generation （absorption）

The effect of melting heat transfer on the two dimensional boundary layer flow of a micropolar fluid near a stagnation point embedded in a porous medium in the presence of internal heat generation/absorption is investigated. The governing non-linear partial differential equations describing the problem are reduced to a system of non-linear ordinary differential equations using similarity transformations solved numerically using the Chebyshev spectral method. Numerical results for velocity, angular velocity and temperature profiles are shown graphically and discussed for different values of the inverse Darcy number, the heat generation/absorption parameter, and the melting parameter. The effects of the pertinent parameters on the local skin-friction coefficient, the wall couple stress, and the local Nusselt number are tabulated and discussed. The results show that the inverse Darcy number has the effect of enhancing both velocity and temperature and suppressing angular velocity. It is also found that the local skin-friction coefficient decreases, while the local Nusselt number increases as the melting parameter increases.     

Effect of viscous dissipation and heat source on flow and heat transfer of dusty fluid over unsteady stretching sheet

This paper investigates the problem of hydrodynamic boundary layer flow and heat transfer of a dusty fluid over an unsteady stretching surface.The study considers the effects of frictional heating(viscous dissipation) and internal heat generation or absorption.The basic equations governing the flow and heat transfer are reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformations.The transformed equations are numerically solved by the Runge-Kutta-Fehlberg-45 order method.An analysis is carried out for two different cases of heating processes,namely,variable wall temperature(VWT) and variable heat flux(VHF).The effects of various physical parameters such as the magnetic parameter,the fluid-particle interaction parameter,the unsteady parameter,the Prandtl number,the Eckert number,the number density of dust particles,and the heat source/sink parameter on velocity and temperature profiles are shown in several plots.The effects of the wall temperature gradient function and the wall temperature function are tabulated and discussed.     

Boundary-layer flow about a vertical spinning cone under mixed thermal boundary conditions and a magnetic field

A similarity analysis was performed to investigate the laminar boundary-layer flow in the presence of a transverse magnetic field over a down-pointing and spinning cone with mixed thermal boundary conditions. Boundary layer velocity and temperature profiles were determined numerically for various values of the magnetic and spin parameters and the Prandtl number. The spin of the cone compresses the velocity profiles towards the surface by inducing an upward flow and decreases the surface temperature. The magnetic field suppresses the velocity profiles and increases the surface temperature. A transformation relating the similarity solutions of the boundary-layer velocity and temperature profiles associated with different values of the mixed thermal boundary condition parameter was obtained.     

MHD flow and heat transfer of a UCM fluid over a stretching surface with variable thermophysical properties

In this paper we investigate the effects of temperature-dependent viscosity, thermal conductivity and internal heat generation/absorption on the MHD flow and heat transfer of a non-Newtonian UCM fluid over a stretching sheet. The governing partial differential equations are first transformed into coupled non-linear ordinary differential equation using a similarity transformation. The resulting intricate coupled non-linear boundary value problem is solved numerically by a second order finite difference scheme known as Keller-Box method for various values of the pertinent parameters. Numerical computations are performed for two different cases namely, zero and non-zero values of the fluid viscosity parameter. That is, 1/?? _r ??0 and 1/?? _r ??0 to get the effects of the magnetic field and the Maxwell parameter on the velocity and temperature fields, for several physical situations. Comparisons with previously published works are presented as special cases. Numerical results for the skin-friction co-efficient and the Nusselt number with changes in the Maxwell parameter and the fluid viscosity parameter are tabulated for different values of the pertinent parameters. The results obtained for the flow characteristics reveal many interesting behaviors that warrant further study on the non-Newtonian fluid phenomena, especially the UCM fluid phenomena. Maxwell fluid reduces the wall-shear stress.     

MHD free convective flow past semi-infinite vertical permeable wall

In this paper,the basic equations governing the flow and heat transfer of an incompressible viscous and electrically conducting fluid past a semi-infinite vertical permeable plate in the form of partial differential equations are reduced to a set of non-linear ordinary differential equations by applying a suitable similarity transformation.Approximate solutions of the transformed equations are obtained by employing the perturbation method for two cases,i.e.,small and large values of the suction parameter.From the numerical evaluations of the solution,it can be seen that the velocity field at any point decreases as the values of the magnetic and suction parameters increase.The effect of the magnetic parameter is to increase the thermal boundary layer.It is also found that the velocity and temperature fields decrease with the increase in the sink parameter.     

Corrigendum of “Similarity analysis in magnetohydrodynamics: Hall effects on free convection flow and mass transfer past a semi-infinite vertical flat plate” [International Journal of Non-Linear Mechanics 38 (2003) 513–520]

The problem of steady, laminar mixed convection heat and mass transfer past a semi-infinite vertical plate in the presence of Hall current has been studied. The governing partial differential equations describing the problem are transformed to a system of non-linear ordinary differential equations with appropriate boundary conditions using Lie's method of infinitesimal transformation groups. The non-linear ordinary differential equations are solved numerically using Chebyshev spectral method. The effects of various parameters on the velocity profiles, temperature and concentration profiles are presented and discussed. This work is an extension and correction for the paper by Megahed et al. [1], published in International Journal of Non-Linear Mechanics 38 (2003) 513–520.