On determination of mode II fracture toughness using semi-circular bend specimen

The cracked semi-circular specimen subjected to three-point bending has been recognized as an appropriate test specimen for conducting mode I, mode II and mixed mode I/II fracture tests in brittle materials. The manufacturing and pre-cracking of the specimen are simple. No complicated loading fixture is also required for a fracture test. However, almost all of the theoretical criteria available for mixed mode brittle fracture fail to predict the experimentally determined mode II fracture toughness obtained from the semi-circular bend (SCB) specimen. In this paper, a modified maximum tangential stress criterion is used for calculating mode II fracture toughness K_IIc in terms of mode I fracture toughness K_Ic. The modified criterion is used for predicting the reported values of mode II fracture toughness for two brittle materials: a rock material (Johnstone) and a brittle polymer (PMMA). It is shown that the modified criterion provides very good predictions for experimental results.     

A new criterion for mixed mode fracture initiation based on the crack tip plastic core region

In this work, we propose a new criterion for mixed mode I-II crack initiation angles based on the characteristics of the plastic core region surrounding the crack tip. The shape and size of the plastic core region are thoroughly analyzed under different loading conditions and a new formulation for the non-dimensional variable radius of the core region is presented for mixed mode (K_I−K_II) fracture. The proposed criterion states that the crack extends in the direction of the local or global minimum of the plastic core region boundary depending on the resultant stress state at the crack tip. The results show a well-defined correlation between the plastic core region characteristics and crack extension angles predicted by other criteria. The proposed criterion is formulated for various loading conditions and is compared with other available criteria against the limited available experimental data. It is shown that the proposed criterion provides a better agreement with the experimental data.     

Mixed Mode Dynamic Fracture in Particulate Reinforced Functionally Graded Materials

A detailed analytical and experimental investigation is presented to understand the dynamic fracture behavior of functionally graded materials (FGMs) under mode I and mixed mode loading conditions. Crack-tip stress, strain and displacement fields for a mixed mode crack propagating at an angle from the direction of property gradation were obtained through an asymptotic analysis coupled with a displacement potential approach. This was followed by a comprehensive series of experiments to gain further insight into the behavior of propagating cracks in FGMs. Dynamic photoelasticity coupled with high-speed photography was used to obtain crack tip velocities and dynamic stress fields around the propagating cracks. Birefringent coatings were used to conduct the photoelastic study due to the opaqueness of the FGMs. Dynamic fracture experiments were performed using different specimen geometries to develop a dynamic constitutive fracture relationship between the mode I dynamic stress intensity factor (K _ID ) and crack-tip velocity ( ) for FGMs with the crack moving in the direction of increasing fracture toughness. A similar -K _ID relation was also obtained for matrix material (polyester) for comparison purposes. The results obtained show that crack propagation velocities in FGMs were about 80% higher than the polyester matrix. Crack arrest toughness was found to be about 10% lower than the value of local fracture toughness in FGMs.     

Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion

Brittle fracture in ceramics sometimes occurs under combined opening-sliding (or mixed mode I/II) crack deformation. In this paper, a generalized maximum tangential stress criterion is employed for predicting the fracture initiation angle under mixed mode I/II loading in some brittle ceramics including alumina, zirconia, soda lime glass and three silicon based ceramics. The experimental results reported for the fracture angles in these ceramics have been obtained from fracture tests on the centrally cracked circular disc (often called the Brazilian disc). Very good agreement is shown to exist between the experimental results and the theoretical predictions. According to the fracture model, the mixed mode fracture angle is strongly dependent on the elastic T-stress in the tested ceramics. The negative T-stress that exists in the Brazilian disc specimen can be the main influencing parameter for decreasing the fracture initiation angle in the investigated ceramics.     

Study of pure and mixed-mode fracture of a brittle material

In order to study the behavior of a crack in a linear-elastic material in plane mixed mode (modes I+II), a specimen's shape and loading have been specially adapted. The specimens are first precracked in mode I and then subjected to monotonic loading until instability is reached by an original device which makes it possible to control the nature of the mixed mode applied and which is adjustable from pure mode I to pure mode II. After the specimens are fractured, the lengths of the initial cracks and the kinking angles were measured in the plane-strain area. Then the stress-intensity factorsK _I andK _II at the moment when crack instability appeared were calculated. This made it possible to apply two criteria: maximum principal stress and maximum stressintensity factorK ₁ ^* at the onset of kinking. From comparing the calculated values with the experimental values we may note that there is good agreement with respect to the crackkinking directions. However, for the limit load values considerable divergences have been recorded which are analyzed.     

Experimental investigation on the propagation of fatigue cracks emanating from sharp notches

The effect of notch geometry on the propagation of fatigue cracks emanating from sharp V-shaped notches is investigated by means of an experimental campaign performed on Al-7075-T651 specimens carrying notches with opening angles of 45°, 90°, and 135°. The samples were tested using a servohydraulic machine under different loading directions and at several loading levels. The crack deflection induced by the variation in loading direction was determined my measuring the kinking angle and by studying the crack propagation plane through fractographic analysis. A linear elastic fracture mechanics approach was adopted for the analysis of experimental results. Stress intensity factors were calculated using an appropriate weight function set up for studying inclined edge cracks emanating from sharp V-notches. The influence of K _II on the crack propagation was discussed on the basis of theoretical and semi empirical models.     

Effect of temperature on the fracture modes of BHW-35 steel under mode-II loading

Finite element method (FEM) has been used to analyze the stress and strain fields and the stress tri-axial levels around the tip of the crack under mode- II loading. The results show that: under mode- II loading, the direction of the maximum tensile stress and that of the maximum tri-axial levels (R _o ) exist at an angle of –75. 3° from the original crack plane; the maximum shear stress andR _o = 0 exist along the original crack plane.Mode- II loading experiment using BHW-35 steel at different temperatures show that there are two kinds of fracture mode, opening mode (or tensile mode) and sliding mode (or shear mode). A decrease in temperature causes the fracture mode to change from shear mode to tensile mode. For BHW-35 steel, this critical temperature is about –90 C. Actually, under any kind of loading mode (mode I . mode II , mode III or mixed mode), there always exist several kinds of potenital fracture modes (for example, opening mode, sliding mode, tearing mode or mixed mode). The effect of temperature under mode- II loading is actually related to the change of the elastic-plastic properties of the material.     

A biaxial test specimen for crack arrest studies

A biaxially loaded, single edge notched (SEN) fracture specimen, with mixed modes I and II loading, was used to study the crack arrest capability of a bonded and riveted tear strap without and with simulated multiple site damage (MSD). MSD was modeled by a 50-percent groove without which the running crack would inevitably kink due to K_II loading. A total of thirty-one 2024-T3 aluminum specimens with various crack and MSD configurations were tested. The fracture parameters associated with straight and curved crack paths were determined by using the experimenta results to drive a dynamic finite element model of the specimen in its generation mode. The crack kinking and extension criteria were verified by the excellent agreement between the prediction based on these fracture parameters and the measured crack kinking angles. Comparison between the test results generated by the biaxial stress specimens and by those generated by small- and full-scale pressurized fuselage rupture experiments showed that this specimen can be used to prescreen the effectiveness of tear straps and crack arrestors in an airplane fuselage.     

Mode III effects on interface delamination

For crack growth along an interface between dissimilar materials the effect of combined modes I, II and III at the crack-tip is investigated. First, in order to highlight situations where crack growth is affected by a mode III contribution, examples of material configurations are discussed where mode III has an effect. Subsequently, the focus is on crack growth along an interface between an elastic-plastic solid and an elastic substrate. The analyses are carried out for conditions of small-scale yielding, with the fracture process at the interface represented by a cohesive zone model. Due to the mismatch of elastic properties across the interface the corresponding elastic solution has an oscillating stress singularity, and this solution is applied as boundary conditions on the outer edge of the region analyzed. For several combinations of modes I, II and III crack growth resistance curves are calculated numerically in order to determine the steady-state fracture toughness. For given values of K_I and K_II the minimum fracture toughness corresponds to K_III=0 in most of the range analyzed, but there is a range where the minimum occurs for a nonzero value of K_III.     

Dynamic stress-intensity factors for unsymmetric dynamic isochromatics

The mixed mode, near-field state of stresses sourrounding a crack propagating at constant velocity is used to derive a relation between the dynamic stress-intensity factorsK _I,K _II, the remote stress component σ _ox and the dynamic isochromatics. This relation, together with an over-deterministic least-square method, form the basis of a datareduction procedure for extracting dynamic,K _I,K _II and σ _ox from the recorded dynamic photoelastic pattern surrounding a running crack. The overdeterministic least-square method is also used to fit static isochromatics to the numerically generated dynamic isochromatics. The resultant staticK _I,K _II and σ _ox are compared with the corresponding dynamic values and estimats of errors involved in using static analysis to process dynamic isochromatic data are obtained. The data-reduction procedure is then used to evaluate the branching stress-intensity factor associated with crack branching and the mixed-mode stress-intensity factors associated with crack curving.     

Dynamic fracture behavior of ceramics at elevated temperatures by caustics

The fracture behavior of partially stabilized zirconia (PSZ) and silicon-nitride ceramics (Si₃N₄) is investigated under dynamic loading at elevated temperatures up to 1200°C using the caustic method combined with an ultra high-speed camera. The values of the dynamic fracture toughnessK _Id and the crack-propagation fracture toughnessK _ID are obtained, and it is shown that a dynamic effect on these values is observed in PSZ but not in Si₃N₄. The dynamic crack arrest toughnessK _Ia is found to exist for PSZ.     

Finite-deformation analysis of the crack-tip fields under cyclic loading

The plane-strain crack subjected to mode I cyclic loading under small scale yielding was analysed. The influence of the load range, load ratio and overload on the near-tip deformation-, stress- and strain-fields was studied. Although the near-tip zones of appreciable cyclic plastic flow for all loading regimes matched closely one another, when scaled with (ΔK/σ_Y)², the activities of plastic flow within them manifested dependence on K_max and K_min, as well as on overload. Cyclic trajectories of the crack-tip opening displacement (CTOD) converged to stable self-similar loops of the sizes proportional to ΔK² and positions in CTOD-K plane dependent on the maximum K along the whole loading route, including an overload. Computed near-tip deformation evidenced plastic crack advance, this way visualising of the Laird–Smith concept of fatigue cracking. This crack growth by blunting-resharpening accelerated with rising ΔK and was halted by an overload. Crack closure upon unloading had no place. The affinities were revealed between computed near-tip stress–strain variables and the experimental trends of the fatigue crack growth rate, such as its dependence on K_max and K_min (or ΔK and K_max), and retardation by overload. Thus, the effects of loading parameters on fatigue cracking, hitherto associated with crack closure, are attributable to the stress–strain fields in front of it as the direct drives of the key fatigue constituents – damage accumulation and bond breaking.     

Mode II fracture behavior of a Zr-based bulk metallic glass

Shear band formation and fracture are characterized during mode II loading of a Zr-based bulk metallic glass. The measured mode II fracture toughness, K_IIc=75±4 MPa√m, exceeds the reported mode I fracture toughness by ∼4 times, suggesting that normal or mean stresses play a significant role in the deformation process at the crack tip. This effect is explained in light of a mean stress modified free volume model for shear localization in metallic glasses. Thermal imaging of deformation at the mode II crack tip further reveals that shear bands initiate, arrest, and reactivate along the same path, indicating that flow in the shear band leads to permanent changes in the glass structure that retain a memory of the shear band path. The measured temperature increase within the shear band is a fraction of a degree. However, heat dissipation models indicate that the temperature could have exceeded the glass transition temperature for less than 1 ms immediately after the shear band formed. It is shown that this time scale is sufficient for mechanical relaxation slightly above the glass transition temperature.     

一种基于SHTB的Ⅱ型动态断裂实验技术

冲击剪切载荷作用下动态断裂韧性的测定是材料力学性能和断裂行为研究中重要组成部分.为了测定材料的Ⅱ型动态断裂韧性,许多学者采用不同的试样与实验方法进行了实验,但限于实验条件,裂纹断裂模式往往是I+Ⅱ复合型,而不是纯Ⅱ型,因而不能准确测得材料的Ⅱ型动态断裂韧性.鉴于此,本文基于分离式霍普金森拉杆(split Hopkinson tension bar,SHTB)实验技术,提出一种改进的紧凑拉伸剪切(modified compact tension shear,MCTS)试样,通过夹具对MCTS试样施加约束,从而保证试样按照纯Ⅱ型模式断裂.采用实验-数值方法对MCTS试样动态加载过程进行分析,将实验测得的波形输入有限元软件ANSYS-LSDYNA,得到了裂纹尖端应力强度因子-时间曲线,并与紧凑拉伸剪切(compact tension shear,CTS)试样进行了对比.同时采用数字图像相关法进行了实验,验证了有限元分析结果.结果表明,MCTS试样在整个加载过程中K_I K_Ⅱ,裂纹没有张开;而CTS试样在同样的加载过程中K_IK_Ⅱ,出现裂纹张开现象.这说明MCTS试样能够准确地测定材料的Ⅱ型动态断裂韧性,为材料动态力学测试提供了一种有效的实验技术.     

A finite element investigation of the effect of crack tip constraint on hole growth under mode i and mixed mode loading

In this work, the effect of constraint on hole growth near a notch tip in a ductile material under mode I and mixed mode loading (involving modes I and II) is investigated. To this end, a 2-D plane strain, modified boundary layer formulation is employed in which the mixed mode elastic K–T field is prescribed as remote boundary conditions. A finite element procedure that accounts for finite deformations and rotations is used along with an appropriate version of J₂ flow theory of plasticity with small elastic strains. Several analyses are carried out corresponding to different values of T-stress and remote elastic mode-mixity. The interaction between the notch and hole is studied by examining the distribution of hydrostatic stress and equivalent plastic strain in the ligament between the notch tip and the hole, as well as the growth of the hole. The implications of the above results on ductile fracture initiation due to micro-void coalescence are discussed.     

Plasticity aspects of interfacial fracture for polymer/glass specimens

Experimental results suggest that the interfacial fracture resistance is minimal for approximate near tip Mode I accompanied by positive and negative near tip Mode II. Finite-strain FE analysis is made for an elastic–plastic medium bonded to an ideally elastic medium with an interface crack. Small-scale plasticity conditions are invoked and examined in relation to the elastic–plastic stress distribution along the bond line. Plasticity engenders a tendency to turn near tip biaxiality towards pure Mode I regardless of the mixed-mode loading. High levels of hydrostatic stress are attained. For different mode mixities of the applied load, the dependence of the elastic–plastic normal bond stress on load level is examined. It is found that under positive Mode II loading, the normal bond stress σ_yy tends to saturate as the load level rises. This does not occur for Mode I and negative Mode II loading. In addition, deformation patterns inside the plastic zone are examined for mixed-mode situations. A displacement criterion based on the normal bond crack opening suggests a dependence of the critical load level on the extent of mixed mode. Under positive mode II fracture, traces of the ductile material are found at the top of the elastic substrate. Some of these conclusions appear to be consistent with the fracture patterns observed for LD-polyethylene/glass interfacial mixed-mode fracture.     

Strip model plasticity analysis of mixed mode crack opening displacement in aluminum alloy LY12

Under mixed mode loading, the crack tip blunts and undergoes displacements in two directions, the normal and shear component corresponding to Mode I and Mode II loading, respectively. These local displacements are determined by the duplicated film method and used to analyze the behavior of mixed mode fracture in aluminum alloy LY12. The mixed mode resultant crack opening displacement (COD) at fracture initiation tends to increase more rapidly with increase of the Mode II shear component. The fracture initiation value of COD for pure Mode II loading is six (6) times greater than that for Mode 1 loading. The same applies to the maximum effective plastic strain crack growth near the crack front. Observed are two typical morphologies, the equal-axes dimples and the parabolic dimples with evidence of slippage as dominated, respectively, by Mode I and Mode II loading.     

Brittle fracture: Variation of fracture toughness with constraint and crack curving under mode I conditions

The effect of constraint on brittle fracture of solids under predominantly elastic deformation and mode I loading conditions is studied. Using different cracked specimen geometry, the variation of constraint is achieved in this work. Fracture tests of polymethyl methacrylate were performed using single edge notch, compact tension and double cantilever beam specimens to cover a bread range of constraint. The test data demonstrate that the apparent fracture toughness of the material varies with the specimen geometry or the constraint level. Theory is developed using the critical stress (strain) as the fracture criterion to show that this variation can be interpreted using the critical stress intensity factorK _Cand a second parameterT orA ₃,whereT andA ₃are the amplitudes of the second and the third term in the Williams series solution, respectively. The implication of this constraint effect to the ASTM fracture toughness value, crack tip opening displacement fracture criterion and energy release rateG _Cis discussed. Using the same critical stress (strain) as the fracture criterion, the theory further predicts crack curving or instability under mode I loading conditions. Experimental data are presented and compared with the theory.     

A photoelastic study of energy loss during a fracture event

Static and dynamic photoelastic experiments were conducted to evaluate the energy lost due to damping in a thick-walled-ring specimen during a run-arrest fracture event. Short starter cracks were machined into a series of ring specimens fabricated from Homalite 100 and the specimens were loaded by a specially designed mechanical deformeter to giveK _Q/K_Imranging from 1.76 to 2.15. The crack was initiated and high-speed photographs of the isochromatic-fringe loops at the tip of the running crack were recorded. The data were analyzed to obtain the instantaneous stress-intensity factorK(t), the normalized crack positiona/w, and the crack velocity \(\dot a\) . A comparison ofK, as a function of positiona/w, was made between static and dynamic crack growth. Average values ofK were determined from these curves and estimates of initial strain energy and energy lost in forming the fracture surface were made. An energy balance was used to evaluate the energy loss due to damping in all the experiments. The energy loss during the run-arrest event was approximately 50 percent of initial strain energy.