共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
基于大型炉体焊接残余应力测试的盲孔法研究 总被引:1,自引:0,他引:1
为提高炉体焊接残余应力测试精度,对传统的盲孔法进行改进,即在测点打孔后多次扩孔并增加孔深;通过对SM400ZL钢焊接残余应力测试时的应变释放系数A,B进行实验标定,得出多组应变释放系数值,计算可得残余应力的估算值,并对不同状况下的残余应力值进行比较.通过大拉力标定试验得出SM400ZL钢盲孔的孔边塑性变形对测量精度的影响和塑性修正公式.结果表明,改进的盲孔法能够更准确地测得焊接残余应力值,测量结果经塑性修正,最大误差减小到2%以下.测试方法和结果可直接在相关的工程实际中应用. 相似文献
4.
表面涂层材料的残余应力测量技术 总被引:2,自引:0,他引:2
本文采用电测盲孔法测定表面涂层材料残余应力的测量技术,在试件和表面涂层结构上进行测试.大量试验表明,此方法可靠、有效,可在工程实际中使用,为解决表面涂层“爆裂”等问题,提供了有效的测定残余应力的手段 相似文献
5.
6.
利用改进的应力释放法、X射线衍射法以及Raman光谱,对平面界面结构金刚石复合片表面热残余应力分别进行了实验研究,得到了金刚石层表面热残余应力值及其分布规律,同时得到了基体厚度与热残余应力的相关关系.研究结果表明,采用应力释放法、X射线衍射法及Raman光谱法测试PDC表面热残余应力,其测试结果均与有限元分析结果相吻合,证明了这三种方法的有效性.其中,X射线衍射法测试结果的误差最大,应力释放法其次,Raman光谱法最为精确.由于应力释放法应变片尺寸及X射线衍射法光斑照射范围的限制,无法在试样表面上取较多的测试点,因此难以得到理想的热残余应力分布曲线.而Raman光谱法中所采用的激光光斑仅5μm,可以取更多的测试点,因此其结果更能真实的反映金刚石层表面热残余应力的分布规律.本文的研究结果为精确测试PDC热残余应力,从而为优化PDC界面结构、提高PDC使用性能提供了理论和实验依据. 相似文献
7.
焊接残余应力是引起应力腐蚀开裂的主要原因,准确地掌握残余应力的分布是对结构完整性评定的关键.为了探明反应堆压力容器顶盖控制棒驱动机构(control rod drive mechanism,CRDM)贯穿件J形焊缝残余应力的分布,本研究加工两个CRDM贯穿件实验模拟件,采用盲孔法测试两个J形接头的焊接残余应力.通过实验探明了CRDM贯穿件焊缝残余应力的分布规律,为反应堆压力容器结构完整性的研究提供必要参考. 相似文献
8.
9.
固体氧化物燃料电池在生产过程中采用不同的加工手段,加工过程会产生一定的损伤,同时材料烧结过程产生比较大的残余应力,这些因素都会影响电池的使用寿命和完整性.本文通过实验测试,研究了不同加工过程对材料性能的影响,其中包括直接冲剪,激光切割以及切割后研磨等方法,并测试了这些加工手段对应的试件的强度.结果显示,直接冲剪法造成性能的分散性比较大,激光切割的性能较好,而研磨加工法对材料的性能影响最小;受残余应力或各层有效应力的作用,单层阳极材料的强度要高于双层电池结构材料的强度;利用弯曲法测试了半电池结构中的残余应力和不同薄膜对应的厚度残余应力,测试的结果和热弹性力学计算结果进行了对比.由于在高温时阳极材料有应力松弛现象,计算得出的残余应力高于实验测试结果. 相似文献
10.
用盲孔释放法测残余应力的基本理论导出在任意钻孔偏心下应变释放系数 A、B 的精确公式.同时通过用偏心公式和不偏心公式计算得到的残余应力值的比较,说明钻孔偏心量对残余应力值影响很大. 相似文献
11.
A non‐iterative implicit algorithm for the solution of advection–diffusion equation on a sphere 下载免费PDF全文
Yuri N. Skiba 《国际流体数值方法杂志》2015,78(5):257-282
A numerical algorithm for the solution of advection–diffusion equation on the surface of a sphere is suggested. The velocity field on a sphere is assumed to be known and non‐divergent. The discretization of advection–diffusion equation in space is carried out with the help of the finite volume method, and the Gauss theorem is applied to each grid cell. For the discretization in time, the symmetrized double‐cycle componentwise splitting method and the Crank–Nicolson scheme are used. The numerical scheme is of second order approximation in space and time, correctly describes the balance of mass of substance in the forced and dissipative discrete system and is unconditionally stable. In the absence of external forcing and dissipation, the total mass and L2‐norm of solution of discrete system is conserved in time. The one‐dimensional periodic problems arising at splitting in the longitudinal direction are solved with Sherman–Morrison's formula and Thomas's algorithm. The one‐dimensional problems arising at splitting in the latitudinal direction are solved by the bordering method that requires a prior determination of the solution at the poles. The resulting linear systems have tridiagonal matrices and are solved by Thomas's algorithm. The suggested method is direct (without iterations) and rapid in realization. It can also be applied to linear and nonlinear diffusion problems, some elliptic problems and adjoint advection–diffusion problems on a sphere. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
12.
13.
14.
廖世俊 《应用数学和力学(英文版)》2008,29(2):223-228
A new modification of false position method for solving nonlinear equations is presented by applying homotopy analysis method (HAM). Some numerical illustrations are given to show the efficiency of algorithm. 相似文献
15.
张宝善 《应用数学和力学(英文版)》1994,15(12):1177-1186
AMODIFIEDMETHODOFAVERAGINGFORSOLVINGACLASSOFNONLINEAREQUATIONSZhangBao-shan(张宝善)(DeparimentofMaih.,XuzhouTeachersCollege,Xuzh... 相似文献
16.
预应力混凝土结构的预应力测量技术的探索研究 总被引:2,自引:0,他引:2
本文着重叙述了在预应力轨枕模型和拉压双应力桥梁模型上采用环槽法和盲孔法测量模型预应力的方法,以及有关的分析计算结果. 相似文献
17.
无网格方法与有限元法或边界元法耦合是无网格方法处理边界条件的方法之一,在无网格方法中研究无网格方法与有限元法或边界元法耦合的研究显得非常重要.本文在无单元Galerkin法和边界元法的基础上,基于无单元Galerkin法子域和边界元法子域的界面上位移连续和面力平衡条件,提出了一种新的无单元Galerkin法和边界元法的直接耦合方法,对弹性力学问题详细推导了在整个求解域上的耦合公式.与以往的耦合法相比,这种方法简单直观,不需要增加新的耦合区域,也不需要建立新的逼近函数来保证界面位移的连续性.算例结果表明,该方法具有较好的计算精度. 相似文献
18.
Time-dependent analysis of rubber flow from a capillary rheometer is analyzed by the finite element method, in which both marker-particle and pseudo-concentration methods are used to define extruding rubber positions. The rubbers are assumed to be represented by a power-law fluid. The extruded free surface obtained by the marker-particle method is compared with the one produced by the pseudo-concentration method. 相似文献
19.
拟谱方法和微分求积法是两类重要的无网格法,二者都已在科学和工程计算中获得了广泛应用。采用拉格朗日插值多项式作为二者的试函数,且采用同一种网格点分布,指出了在空间域上,微分求积法是拟谱方法的一种特殊形式。在此基础上,结合二者各自的特点,提出了拟谱-微分求积混合方法用于求解一类双曲电报方程。理论分析和数值测试表明,新方法在空间域上具有谱精度收敛性,在时间域上是A-稳定的,比较适合于求解多维电报方程。 相似文献
20.
Yun Tianquan 《应用数学和力学(英文版)》1999,20(1):36-42
The uniqueness of solution of field point, inside a convex region due to singular source(s) with kernel function decreasing with distance increasing, outsidergeion-distribution(s) such that the boundary condition expressed by the response of the source(s) is satisfied, is proved by using the condition of kernel function decreasing with distance increasing and an integral inequality. Examples of part ofthese singular sources such as Kelvin’s point force, Point-Ring-Couple (PRC) etc.are given. The proof of uniqueness of solution of field point in a twisted shaft of revolution due to PRC distribution is given as an example of application. 相似文献