Mixed convection flow over a vertical wedge embedded in a highly porous medium

 The steady mixed convection flow over a vertical wedge with a magnetic field embedded in a porous medium has been investigated. The effects of the permeability of the medium, surface mass transfer and viscous dissipation on the flow and temperature fields have been included in the analysis. The coupled nonlinear partial differential equations governing the flow field have been solved numerically using the Keller box method. The skin friction and heat transfer are found to increase with the parameters characterizing the permeability of the medium, buoyancy force, magnetic field and pressure gradient. However the effect of the permeability and magnetic field on the heat transfer is very small. The heat transfer increases with the Prandtl number, but the skin friction decreases. The buoyancy force which assists the forced convection flow causes an overshoot in the velocity profiles. Both the skin friction and heat transfer increase with suction and the effect of injection is just the reverse. Received on 21 May 1999     

Unsteady free convection flow over an infinite vertical porous plate due to the combined effects of thermal and mass diffusion,magnetic field and Hall currents

The unsteady free convection flow over an infinite vertical porous plate, which moves with time-dependent velocity in an ambient fluid, has been studied. The effects of the magnetic field and Hall current are included in the analysis. The buoyancy forces arise due to both the thermal and mass diffusion. The partial differential equations governing the flow have been solved numerically using both the implicit finite difference scheme and the difference-differential method. For the steady case, analytical solutions have also been obtained. The effect of time variation on the skin friction, heat transfer and mass transfer is very significant. Suction increases the skin friction coefficient in the primary flow, and also the Nusselt and Sherwood numbers, but the skin friction coefficient in the secondary flow is reduced. The effect of injection is opposite to that of suction. The buoyancy force, injection and the Hall parameter induce an overshoot in the velocity profiles in the primary flow which changes the velocity gradient from a negative to a positive value, but the magnetic field and suction reduce this velocity overshoot.     

Unsteady mixed convection with double diffusion over a horizontal cylinder and a sphere within a porous medium

The combined effects of the permeability of the medium, magnetic field, buoyancy forces and dissipation on the unsteady mixed convection flow over a horizontal cylinder and a sphere embedded in a porous medium have been studied. The nonlinear coupled partial differential equations with three independent variables have been solved numerically using an implicit finite-difference scheme in combination with the quasilinearization technique. The skin friction, heat transfer and mass transfer increase with the permeability of the medium, magnetic field and buoyancy parameter. The heat and mass transfer continuously decrease with the stream-wise distance, whereas the skin friction increases from zero, attains a maximum and then decreases to zero. The skin friction, heat transfer and mass transfer are significantly affected by the free stream velocity distribution. The effect of dissipation parameter is found to be more pronounced on the heat transfer than on the skin friction and mass transfer.Untersucht wurden kombinierte Effekte der Permeabilität des Mediums, des magnetischen Feldes, der Auftriebskräfte und der Dissipation auf die instationäre Mischkonvektions-Strömung über einen horizontalen Zylinder und eine Kugel, die in einem porösen Medium eingebettet sind. Die nichtlinearen gekoppelten partiellen Differentialgleichungen mit drei unabhängigen Variablen wurden numerisch unter Benutzung eines impliziten Finite-Differenzen-Verfahrens in Verbindung mit der Quasi-Linearisierungstechnik gelöst. Die Oberflächenreibung und die Wärme- und Stoffübertragung steigen mit der Permeabilität des Mediums, dem magnetischen Feld und dem Auftriebsparameter an. Die Wärme- und Stoffübertragung fällt stetig in Strömungsrichtung ab, wohingegen die Oberflächenreibung von Null ansteigt, ein Maximum erreicht und wieder auf Null abfällt. Die Oberflächenreibung und die Wärme- und Stoffübertragung werden signifikant von der Verteilung der Freistromgeschwindigkeit beeinflut. Es wurde festgestellt, das der Dissipations-Parameter stärker die Wärmeübertragung als die Oberflächenreibung und die Stoffübertragung beeinflut.     

Non-darcy double-diffusive mixed convection from heated vertical and horizontal plates in saturated porous media

The non-darcy mixed convection flows from heated vertical and horizontal plates in saturated porous media have been considered using boundary layer approximations. The flows are considered to be driven by multiple buoyancy forces. The similarity solutions for both vertical and horizontal plates have been obtained. The governing equations have been solved numerically using a shooting method. The heat transfer, mass transfer and skin friction are reduced due to inertial forces. Also, they increase with the buoyancy parameter for aiding flow and decrease for the opposing flow. For aiding flow, the heat and mass transfer coefficients are found to approach asymptotically the forced or free convection values as the buoyancy parameter approaches zero or infinity.     

Unsteady mixed convection over two-dimensional and axisymmetric bodies

The unsteady laminar incompressible mixed convection flow over a two-dimensional body (cylinder) and an axisymmetric body (sphere) has been studied when the buboyancy forces arise from both thermal and mass diffusion and the unsteadiness in the flow field is introduced by the time dependent free stream velocity. The nonlinear partial differential equations with three independent variables governing the flow have been solved numerically using an implicit finite-difference scheme in combination with the quasilinearization technique. The results indicate that for the thermally assisting flow the local skin friction, heat transfer and mass diffusion are enhanced when the buoyancy force from mass diffusion assists the thermal buoyancy force. But this trend is opposite for the thermally opposing flow. The point of zero skin friction moves upstream due to unsteadiness. No singularity is observed at the point of zero skin friction for unsteady flow unlike steady flow. The flow reversal is observed after a certain instant of time. The velocity overshoot occurs for assisting flows.     

Combined heat and mass transfer along a vertical moving cylinder with a free stream

The mixed convection flow over a continuous moving vertical slender cylinder under the combined buoyancy effect of thermal and mass diffusion has been studied. Both uniform wall temperature (concentration) and uniform heat (mass) flux cases are included in the analysis. The problem is formulated in such a manner that when the ratio λ(= u _w/(u _w + u _∞), where u _w and u _∞ are the wall and free stream velocities, is zero, the problem reduces to the flow over a stationary cylinder, and when λ = 1 it reduces to the flow over a moving cylinder in an ambient fluid. The partial differential equations governing the flow have been solved numerically using an implicit finite-difference scheme. We have also obtained the solution using a perturbation technique with Shanks transformation. This transformation has been used to increase the range of the validity of the solution. For some particular cases closed form solutions are obtained. The surface skin friction, heat transfer and mass transfer increase with the buoyancy forces. The buoyancy forces cause considerable overshoot in the velocity profiles. The Prandtl number and the Schmidt number strongly affect the surface heat transfer and the mass transfer, respectively. The surface skin friction decreases as the relative velocity between the surface and free stream decreases. Received on 17 May 1999     

Influence of lateral mass flux on mixed convection heat and mass transfer over inclined surfaces in porous media

 The effect of lateral mass flux on mixed convection heat and mass transfer in a saturated porous medium adjacent to an inclined permeable surface is analyzed. A similarity solution is obtained when surface temperature and concentration, free stream velocity and injection/suction velocity of fluid are prescribed as power functions of distance from the leading edge. The cases when the flow and buoyancy forces are in the same and opposite directions are discussed both for aiding and opposing buoyancy effects. The governing parameters are the mixed convection parameter Gr, the Lewis number Le, the buoyancy ratio N, the lateral mass flux parameter f _w, representing the effects of injection or withdrawal of fluid at the wall, and λ which specifies three cases of the inclined plate. The interactive effect of these parameters on heat and mass transfer rates are presented. It is observed that the diffusion ratio (Le) has a more pronounced effect on concentration field than on flow and temperature fields. It is found that the rates of heat and mass transfer increase with suction and decrease with injection of the fluid. Received on 31 August 2000 / Published online: 29 November 2001     

Unsteady mixed convection boundary layer flow over a vertical cone with non-uniform slot suction (injection)

The non-similar solution of an unsteady mixed convection laminar boundary layer flow over a vertical cone in the presence of non-uniform surface mass transfer through slot has been obtained while the axis of cone is inline with the flow. The unsteadiness is caused by the time dependent free stream velocity. The governing boundary layer equations are transformed into a non-dimensional form by a group of non-similar transformations. The resulting coupled non-linear partial differential equations have been solved numerically by the combination of quasi-linearization technique and an implicit finite difference scheme. Numerical computations are performed for different values of the parameters to display the velocity and temperature profiles graphically. Both accelerating and decelerating free stream velocities are considered. Numerical results are reported to display the effects of non-uniform single and double slot suction (injection) on skin friction and heat transfer coefficients at the wall. Further, the effects of Prandtl number, buoyancy and mass transfer (suction or injection) parameters at different stream-wise locations for various times on velocity and temperature profiles, and on skin friction and heat transfer coefficients are also presented in this paper.     

Steady mixed convection flow of Maxwell fluid over an exponentially stretching vertical surface with magnetic field and viscous dissipation

The steady mixed convection flow and heat transfer from an exponentially stretching vertical surface in a quiescent Maxwell fluid in the presence of magnetic field, viscous dissipation and Joule heating have been studied. The stretching velocity, surface temperature and magnetic field are assumed to have specific exponential function forms for the existence of the local similarity solution. The coupled nonlinear ordinary differential equations governing the local similarity flow and heat transfer have been solved numerically by Chebyshev finite difference method. The influence of the buoyancy parameter, viscous dissipation, relaxation parameter of Maxwell fluid, magnetic field and Prandtl number on the flow and heat transfer has been considered in detail. The Nusselt number increases significantly with the Prandtl number, but the skin friction coefficient decreases. The Nusselt number slightly decreases with increasing viscous dissipation parameter, but the skin friction coefficient slightly increases. Maxwell fluid reduces both skin friction coefficient and Nusselt number, whereas buoyancy force enhances them.     

Simultaneous heat and mass transfer in unsteady free convection from two-dimensional and axisymmetric bodies

The unsteady laminar free convection boundary layer flows around two-dimensional and axisymmetric bodies placed in an ambient fluid of infinite extent have been studied when the flow is driven by thermal buoyancy forces and buoyancy forces from species diffusion. The unsteadiness in the flow field is caused by both temperature and concentration at the wall which vary arbitrarily with time. The coupled nonlinear partial differential equations with three independent variables governing the flow have been solved numerically using an implicit finite-difference scheme in combination with the quasilinearization technique. Computations have been performed for a circular cylinder and a sphere. The skin friction, heat transfer and mass transfer are strongly dependent on the variation of the wall temperature and concentration with time. Also the skin friction and heat transfer increase or decrease as the buoyancy forces from species diffusion assist and oppose, respectively, the thermal buoyancy force, whereas the mass transfer rate is higher for small values of the ratio of the buoyancy parameters than for large values. The local heat and mass transfer rates are maximum at the stagnation point and they decrease progressively with increase of the angular position from the stagnation point.     

Three dimensional free convection flow and heat transfer along a porous vertical plate

The free convection flow along a vertical porous plate with transverse sinusoidal suction velocity distribution is investigated. Due to this type of suction velocity at the plate the flow becomes three dimensional one. For the asymptotic flow condition, the wall shear stress in the direction of main flow for different values of buoyancy parameter G is obtained. For G=0, the skin friction in the direction of free stream and the rate of heat transfer from the plate to the fluid are given. It is found that these results differ from those obtained by Gersten and Gross.     

Oberbeck convection flow of a couple stress fluid through a vertical porous stratum

The flow and heat transfer characteristics of Oberbeck convection of a couple stress fluid in a vertical porous stratum is investigated. The perturbation method of solution is obtained in terms of buoyancy parameter N valid for small values of N. This limitation is relaxed through numerical solutions using the finite difference technique with an error of 0.1×10^-7. The effect of increase in the values of temperature difference between the plates, permeability parameter and couple stress parameter on velocity, temperature, mass flow rate, skin friction and rate of heat transfer are reported. A new achievement is explored to analyse the flow for strong, weak and comparable porosity with the couple stress parameter. It is noted that both the porous parameter and the couple stress parameter suppress the flow. Higher-temperature difference is required to achieve the mass flow rate equivalent to that of viscous flow.     

Self-similar solution of the unsteady mixed convection flow in the stagnation point region of a rotating sphere

An analysis is performed to present a new self-similar solution of unsteady mixed convection boundary layer flow in the forward stagnation point region of a rotating sphere where the free stream velocity and the angular velocity of the rotating sphere vary continuously with time. It is shown that a self-similar solution is possible when the free stream velocity varies inversely with time. Both constant wall temperature and constant heat flux conditions have been considered in the present study. The system of ordinary differential equations governing the flow have been solved numerically using an implicit finite difference scheme in combination with a quasilinearization technique. It is observed that the surface shear stresses and the surface heat transfer parameters increase with the acceleration and rotation parameters. For a certain value of the acceleration parameter, the surface shear stress in x-direction vanishes and due to further reduction in the value of the acceleration parameter, reverse flow occurs in the x–component of the velocity profiles. The effect of buoyancy parameter is to increase the surface heat transfer rate for buoyancy assisting flow and to decrease it for buoyancy opposing flow. For a fixed buoyancy force, heating by constant heat flux yields a higher value of surface heat transfer rate than heating by constant wall temperature.     

Unsteady mixed convection flow in stagnation region adjacent to a vertical surface

The unsteady two-dimensional laminar mixed convection flow in the stagnation region of a vertical surface has been studied where the buoyancy forces are due to both the temperature and concentration gradients. The unsteadiness in the flow and temperature fields is caused by the time-dependent free stream velocity. Both arbitrary wall temperature and concentration, and arbitrary surface heat and mass flux variations have been considered. The Navier-Stokes equations, the energy equation and the concentration equation, which are coupled nonlinear partial differential equations with three independent variables, have been reduced to a set of nonlinear ordinary differential equations. The analysis has also been done using boundary layer approximations and the difference between the solutions has been discussed. The governing ordinary differential equations for buoyancy assisting and buoyancy opposing regions have been solved numerically using a shooting method. The skin friction, heat transfer and mass transfer coefficients increase with the buoyancy parameter. However, the skin friction coefficient increases with the parameter , which represents the unsteadiness in the free stream velocity, but the heat and mass transfer coefficients decrease. In the case of buoyancy opposed flow, the solution does not exist beyond a certain critical value of the buoyancy parameter. Also, for a certain range of the buoyancy parameter dual solutions exist.Die zweidimensionale laminare Mischkonvektionsströmung im Staubereich einer vertikalen Oberfläche, in der Temperatur- und Konzentrationsgradienten die Auftriebskräfte erzeugen, wurde untersucht. Die Unstetigkeiten im Strömungs- und im Temperaturfeld liegen in der zeitabhängigen freien Strömungsge-schwindigkeit begründet. Die willkürliche Wandtempereratur und Konzentration sowie die willkürliche Oberflächenwärme- und die Massenstromschwankungen wurden in Betracht gezogen. Die Navier-Stokes-Gleichung, die Energiegleichung und die Konzentrationsgleichung, die drei nicht lineare, partielle Differentialgleichungen mit drei unabhängigen Variablen darstellen, sind auf eine Gruppe von nicht linearen, gewöhnlichen Differentialgleichungen reduziert worden. Die Berechnung ist auch mit der Grenzflächenap-proximation gemacht worden und die Unterschiede der Ergebnisse wurden diskutiert.Die bestehenden gewöhnlichen Differentialgleichungen für auftriebsuntertützte und auftriebshemmende Bereiche sind numerisch mit dem Shooting-Verfahren gelöst worden. Die Oberflächenreibung, die Wärme- und Stoffübertragungskoeffizienten steigen mit dem Auftriebsparameter. Der Oberflächenreibungskoeffizient steigt mit dem Parameter, der auch für die Unstetigkeit der freien Strömungsgeschwindigkeit verantwortlich ist. Die Wärme- und Stoffübertragungskoeffizienten sinken dann. Im Fall der auftriebsgehemmten Strömung, existiert nach einem bestimmten kritischen Wert des Auftriebsparameters keine Lösung mehr. Für eine bestimmte Reihe von Auftriebsparametern gibt es zwei Lösungen.     

Effect of viscous dissipation on the mixed convection heat transfer from an exponentially stretching surface

The mixed convection flow and heat transfer from an exponentially stretching vertical surface in a quiescent fluid is analyzed using similarity solution technique. Wall temperature and stretching velocity are assumed to have specific exponential function forms. The influence of buoyancy along with viscous dissipation on the convective transport in the boundary layer region is analyzed in both aiding and opposing flow situations. The flow is governed by the mixed convection parameter Gr/Re². The velocity and temperature inside the boundary layer are observed to be influenced by the parameters like Prandtl number Pr, Gebhart number Gb. Significant changes are observed in non-dimensional skin friction and heat transfer coefficients due to viscous dissipation in the medium. The flow and temperature distributions inside the boundary layer are analyzed and the results for non-dimensional skin friction and heat transfer coefficients are discussed through computer generated plots.     

Radiation effect on mixed convection from a horizontal surface in a porous medium

The effect of thermal radiation on the non-Darcy mixed convection flow over a non-isothermal horizontal surface immersed in a saturated porous medium has been studied. The wall temperature is assumed to have a power-law variation with the distance measured from the leading edge of the plate. The non-linear coupled parabolic partial differential equations governing the flow have been solved numerically using a finite-difference scheme. For some particular cases, the self-similar solution has also been obtained. The heat transfer is found to be strongly influenced by the radiative flux number, buoyancy parameter, variation of wall temperature, non-Darcy parameter and the nature of the free stream velocity.     

Finite Element Solution of Mixed Convection on a Moving Vertical Cylinder with Suction in a Moving Micropolar Fluid Medium

In this paper the problem of mixed convection on a moving vertical cylinder with suction in a moving micropolar fluid medium has been investigated, using finite element method. The effect of important parameters, namely micropolar parameter, suction parameter and velocity coefficient parameter have been discussed on the velocity, microrotation and temperature functions when the velocity of the cylinder is greater than the free stream velocity. Skin friction and the Nusselt number have also been computed, which are given in the table. The temperature distribution is effected moderately by the motion of the cylinder as well with the buoyancy parameter.     

Numerical study of nanofluid mixed convection in a horizontal curved tube using two-phase approach

Laminar mixed convection of nanofluid consisting of water/Al₂O₃ in a horizontal curved tube is investigated numerically. Three dimensional elliptical governing equations have been solved to study the simultaneous effect of the buoyancy and centrifugal forces throughout the curved tube. The effects of nanoparticle concentrations on the secondary flow and also on the contours of temperature are presented and discussed. Axial velocity profiles with respect to the horizontal and vertical diameter are shown. In addition, the effects of nanoparticle volume fractions on the axial evolution of the local peripheral average convective heat transfer coefficient and the local peripheral average skin friction coefficient are studied. It is shown that the average convective heat transfer coefficient augments with the nanoparticle concentrations. However, its effect on the average skin friction coefficient is negligible.     

Steady laminar mixed convection stagnation-point flow of a nanofluid over a vertical permeable surface in the presence of a magnetic field

A similarity solution for a steady laminar mixed convection boundary layer flow of a nanofluid near the stagnation point on a vertical permeable plate with a magnetic field and a buoyancy force is obtained by solving a system of nonlinear ordinary differential equations. These equations are solved analytically by using a new kind of a powerful analytic technique for nonlinear problems, namely, the homotopy analysis method (HAM). Three different types of nanoparticles, namely, copper (Cu), alumina (Al₂O₃), and titanium oxide (TiO₂), with water as the base fluid are considered. The influence of the volume fraction of nanoparticles, permeability parameter, magnetic parameter, and mixed convection parameter on the surface shear stress and surface heat transfer, as well as on the velocity and temperature profiles, is considered. It is observed that the skin friction coefficient and the local Nusselt number increase with the nanoparticle volume fraction for all types of nanoparticles considered in this study. The greatest values of the skin friction coefficient and the local Nusselt number are obtained for Cu nanoparticles.     

化学反应对竖直平板边界磁流体动力学微极流体滑流的影响

Heat and mass transfer effects on the unsteady flow of a micropolar fluid through a porous medium bounded by a semi-infinite vertical plate in a slip-flow regime are studied taking into account a homogeneous chemical reaction of the first order. A uniform magnetic field acts perpendicular to the porous surface absorb micropolar fluid with a suction velocity varying with time. The free stream velocity follows an exponentially increasing or decreasing small perturbation law. Using the approximate method, the expressions for the velocity microrotation, temperature, and concentration are obtained. Futher, the results of the skin friction coefficient, the couple stress coefficient, and the rate of heat and mass transfer at the wall are presented with various values of fluid properties and flow conditions.