共查询到18条相似文献,搜索用时 93 毫秒
1.
2.
提出了一种用傅立叶变换进行电机转速测量的新方法,以Labview为平台建立了实验系统,利用采集卡(或计算机声卡)检测被与电机同轴连接的齿盘调制的光电信号,由信号的幅度谱计算电机的转速。使用斩波器对此方法进行了实验验证,当转速范围为100—6000r/m,测量结果和实际值完全吻合。 相似文献
3.
4.
5.
6.
Windows95环境中转速测量和直流电机转速控制方法 总被引:1,自引:1,他引:0
介绍在Windows95环境中用Visual Basic5.0编写转速测量和直流电机转速控制方法的过程。 相似文献
7.
9.
基于传感器的转速测量方法较多,总体分为模拟式和数字式两种.本文重点研究数字式测量方法.针对光电传感器的原理进行简单介绍,并说明它是如何对电机转速进行测量的.通过实验得到的结果进行了数据分析,用最小二乘法拟合出了线性表达式. 相似文献
10.
11.
本文介绍了转镜式高速相机在爆炸实验中的应用情况。阐明了这些相机使用时配备的各种主要附加装置,并举例说明了所得到的实验结果。 相似文献
12.
高速扫描相机时间测量不确定度分析 总被引:21,自引:6,他引:15
以国内普遍使用的SJZ-30型高速扫描相机为例,用精测转速方法的结果处理数据,转速测量相对合成不确定度小于0.1%,时间间隔测量的相对扩展不确定度为0.2%.扫描速度在像面上的位置误差,采用"中值扫描速度",可予以校正.同时讨论了进一步降低转速测量不确定度和位置误差的方法. 相似文献
13.
14.
基于大涡模拟和光线追踪方法, 对光线穿越流场后的光程分布与混合层流场中涡结构之间的关系进行了分析, 提出了一种基于涡核位置提取的涡结构瞬时对流速度定量计算方法, 并使用直接几何测量数据进行了验证. 通过对不同尺寸的涡结构、涡-涡配对及融合过程中的涡结构和强压缩性流场中涡结构瞬时对流速度的定量数值计算, 揭示了混合层流场中涡结构对流速度的特性: 对单个涡结构而言, 其瞬时对流速度具有脉动特性, 且脉动幅度随涡结构尺寸和流场压缩性而变化; 在涡-涡配对及融合过程中, 涡对中各个涡结构的瞬时对流速度都表现出类似正弦波动的特点. 针对混合层流场中涡结构对流速度的特性, 给出了其背后的物理原因. 相似文献
15.
Direct- and pulse-current (DC and PC) chromium electroplating on Cr-Mo steel were performed in a sulfate-catalyzed chromic acid solution at 50 °C using a rotating cylinder electrode (RCE). The electroplating cathodic current densities were at 30, 40, 50 and 60 A dm−2, respectively. The relationship between electroplating current efficiency and the rotating speed of the RCE was studied. The cross-sectional microstructure of Cr-deposit was examined by transmission electron microscope (TEM). Results showed that DC-plating exhibited higher current efficiency than the PC-plating under the same conditions of electroplating current density and the rotating speed. We found the critical rotating speed of RCE used in the chromium electroplating, above this rotating speed the chromium deposition is prohibited. At the same plating current density, the critical rotating speed for DC-plating was higher than that for PC-plating. The higher plating current density is, the larger difference in critical rotating speeds appears between DC- and PC-electroplating. Equiaxed grains, in a nanoscale size with lower dislocation density, nucleate on the cathodic surface in both DC- and PC-electroplating. Adjacent to the equiaxed grains, textured grains were found in other portion of chromium deposit. Fine columnar grains were observed in the DC-electroplated deposit. On the other hand, very long slender grains with high degree of preferred orientation were detected in PC-electroplated deposit. 相似文献
16.
Yong-Chen Pei Qing-Chang Tan Xin Yang Chris Chatwin 《Journal of sound and vibration》2012,331(16):3762-3773
To investigate the vibrational response of the magnetic read/write head in hard disk drives this paper models a rotating flexible disk excited by a moving suspension-slider system which is considered to be a mass-dashpot-spring loading system, with the initial unstressed transverse runout integrated into the rotating disk dynamic model. The slider motion on the disk surface is driven by the suspension rotating at a constant speed. By subtracting the steady-state deflection component from the instantaneous deflection response of the rotating disk system, the relative vibration transverse deflection of the slider caused by the motion of the suspension-slider loading system is obtained. The effects of the slider initial and final positions, speed of movement, the disk rotational speed, and the disk mode of the initial transverse runout on the maximum amplitude of the relative vibration deflection are analyzed. 相似文献
17.
18.
超高速摄影用高强度铝合金转镜动态特性的研究 总被引:12,自引:4,他引:8
转镜型超高速摄影机的信息容量取决于转镜的材料和横截面形状.本文首次对超高速摄影用高强度铝合金转镜从理论和实验两个方面进行了系统研究.研究表明:高强度铝合金是超高速分幅摄影机转镜的理想材料;当铝转镜截面形状为正三角形、镜面尺寸为(17×32.5)mm2时,转速已达(50×104)rpm,镜面尺寸为(33×24)mm2时,转速已达(40×104)rpm. 相似文献