Enhancement of gas phase heat transfer by acoustic field application

This study discusses a possibility for enhancement of heat transfer between solids and ambient gas by application of powerful acoustic fields. Experiments are carried out by using preheated Pt wires (length 0.1-0.15 m, diameter 50 and 100 micro m) positioned at the velocity antinode of a standing wave (frequency range 216-1031 Hz) or in the path of a travelling wave (frequency range 6.9-17.2 kHz). A number of experiments were conducted under conditions of gas flowing across the wire surface. Effects of sound frequency, sound strength, gas flow velocity and wire preheating temperature on the Nusselt number are examined with and without sound application. The gas phase heat transfer rate is enhanced with acoustic field strength. Higher temperatures result in a vigorous radiation from the wire surface and attenuate the effect of sound. The larger the gas flow velocity, the smaller is the effect of sound wave on heat transfer enhancement.     

气体声弛豫过程中有效比热容与弛豫时间的分解对应关系

声在多原子分子气体中传播所引起的弛豫过程是探索气体特性的重要方面. 本文通过研究气体声弛豫过程中振动自由度与平动自由度(V-T)以及振动自由度之间(V-V)的分子能量转移模型, 给出了有效比热容与弛豫时间的分解对应关系及其通用获得方法. 该分解模型与现有的声弛豫模型相比, 反映了分解后的V-T 和V-V弛豫过程中振动比热容与弛豫时间的对应关系, 并发现了较高能级是引起对应声弛豫过程的决定因素. 将基于该分解模型获得的气体声弛豫衰减谱经碰撞直径微调改进后, 比现有理论更接近实验数据, 其结果证明了该分解对应关系的正确性和合理性.     

Combustion driven oscillations

Combustion driven oscillations can occur when a turbulent flame is enclosed in a tube or cavity. Interaction between heat fluctuations and the internal standing wave field at one of the natural frequencies of the air column produces strong organ pipe tones. The sound power emitted by this thermal-acoustic interaction depends on the impedance either side of the combustion zone and on a transfer function defining the response of the flame to sound wave disturbances. If this power exceeds the rate at which energy is dissipated at the cavity boundaries then there is a growth of the internal pressure field and an increase in the radiated sound. Plane wave theory is used to calculate the flame transfer function and adjacent impedances for a simple gas fired tube assembly. The predicted instability frequencies are then compared with experimental data. The results indicate that the flame transfer function plays a dominant role in determining the acoustic stability of the cavity and that insufficient data is available for accurately predicting unsteady flame front behaviour.     

Sound transmission loss across specially orthotropic laminates

This work studies the sound transmission loss across composite material in order to understand the sound-insulating capacity at various frequencies. A so-called specially orthotropic laminate was examined. The material properties in thickness direction are different from those in in-plane directions but it is isotropic in the laminating plane. Thus the specially orthotropic laminate can be analyzed by two-dimensional acoustic analysis. The sound transfer matrix of specially orthotropic single layer is determined by stress and velocity. The boundary conditions between different interface planes and the transfer matrix related to these conditions yield the mathematical model of the sound wave that propagates in composite materials. The experimental and numerical results of sound transmission loss are compared. Arrangement of various material properties and their sound penetrating characteristic were investigated and discussed.     

重塑砂质含气沉积物的声响应特性与模型预测分析

海洋沉积物中气泡的存在对沉积物的声学特性有显著影响.为实现在实验室内对不同初始应力条件下含气沉积物的声学特性测量,研制了一套可用于土工三轴仪的双探针声学测量系统,基于CT扫描试验获得重塑含气砂样品中气泡群的尺寸分布,确定其共振频率范围.试验结果表明:细砂沉积物声速随气体含量的增加呈指数型降低,衰减系数随气体含量的增加呈...     

The nonlinear propagation of acoustic waves in a viscoelastic medium containing cylindrical micropores

Based on an equivalent medium approach, this paper presents a model describing the nonlinear propagation of acoustic waves in a viscoelastic medium containing cylindrical micropores. The influences of pores' nonlinear oscillations on sound attenuation, sound dispersion and an equivalent acoustic nonlinearity parameter are discussed. The calculated results show that the attenuation increases with an increasing volume fraction of micropores. The peak of sound velocity and attenuation occurs at the resonant frequency of the micropores while the peak of the equivalent acoustic nonlinearity parameter occurs at the half of the resonant frequency of the micropores. Furthermore, multiple scattering has been taken into account, which leads to a modification to the effective wave number in the equivalent medium approach. We find that these linear and nonlinear acoustic parameters need to be corrected when the volume fraction of micropores is larger than 0.1%.     

Open cycle traveling wave thermoacoustics: mean temperature difference at the regenerator interface

In an open cycle traveling wave thermoacoustic engine, the hot heat exchanger is replaced by a steady flow of hot gas into the regenerator to provide the thermal energy input to the engine. The steady-state operation of such a device requires that a potentially large mean temperature difference exist between the incoming gas and the solid material at the regenerator's hot side, due in part to isentropic gas oscillations in the open space adjacent to the regenerator. The magnitude of this temperature difference will have a significant effect on the efficiencies of these open cycle devices. To help assess the feasibility of such thermoacoustic engines, a numerical model is developed that predicts the dependence of the mean temperature difference upon the important design and operating parameters of the open cycle thermoacoustic engine, including the acoustic pressure, mean mass flow rate, acoustic phase angles, and conductive heat loss. Using this model, it is also shown that the temperature difference at the regenerator interface is approximately proportional to the sum of the acoustic power output and the conductive heat loss at this location.     

声波在水-含气沉积物界面的反射

含气泡海洋沉积物的声学特性是海底探测的重要问题。为了研究气泡存在对水-含气沉积物界面声反射系数的影响,本文基于气泡振动修正的Biot波动方程推导了气泡存在修正的Biot弹性模量,并结合水-沉积物界面的“开孔”边界条件推导了声波从水入射到水-含气沉积物界面的反射系数。数值分析表明气泡的振动导致反射系数呈现显著的频率特性。在气泡共振频率附近,由于气泡的共振引发的强散射和强衰减,使得反射系数很大,无论以何种角度入射,声波都很难进入含气泡的沉积物。本文研究结果表明,气泡半径、含量、声波频率以及入射角度都是影响水-含气沉积物界面反射系数的主要因素。      

Attenuation of sound in multi-element acoustically lined rectangular ducts in the absence of mean flow

Extensions of the ordinary Wiener-Hopf technique are outlined and applied to the solution of sound attenuation in multi-element ducts with acoustically absorbing liners in series as well as in parallel combination. For demonstration purposes the simplest case of engineering interest is chosen: namely, a rectangular channel at zero convection velocity. Extensions to circular and annular geometries as well as to mean flow situations are possible. In the absence of a realistic source model acoustic power attenuation results are presented for an incoming fundamental mode only, to show the influence of major design parameters for point reacting liners. The broad band-width attenuation capacity of some liner configurations as well as the necessity to include wave reflections at liner discontinuities for multi-element liners is clearly demonstrated. For a given acoustic source a multi-mode solution can be found by summing the contributions of each incoming unattenuated mode.     

Band structures of two dimensional solid/air hierarchical phononic crystals

The hierarchical phononic crystals to be considered show a two-order “hierarchical” feature, which consists of square array arranged macroscopic periodic unit cells with each unit cell itself including four sub-units. Propagation of acoustic wave in such two dimensional solid/air phononic crystals is investigated by the finite element method (FEM) with the Bloch theory. Their band structure, wave filtering property, and the physical mechanism responsible for the broadened band gap are explored. The corresponding ordinary phononic crystal without hierarchical feature is used for comparison. Obtained results show that the solid/air hierarchical phononic crystals possess tunable outstanding band gap features, which are favorable for applications such as sound insulation and vibration attenuation.     

Excitation of Surface and Leaky Waves on a Solid Body – Gas Interface

We analyze excitation of bulk, leaky, and surface waves by a point time-harmonic forcing applied perpendicularly to a solid body – gas interface. The case where the sound speed in the gas is less than the Rayleigh-wave velocity on the solid surface is considered. Expressions for the radiation powers of longitudinal and transverse spherical waves in the solid body and of a Stoneley surface wave, averaged over their periods, are derived. Excitation of a spherical acoustic wave in the gas and a pseudo-Rayleigh leaky wave is analyzed. For the spatial region corresponding to zenith angles exceeding the arcsine of the ratio of the sound speed in the gas and the transverse-wave velocity in the solid body, where the leaky-wave energy is transformed into the acoustic wave, we derive formulas describing their summed radiated power.     

平面波与线性粘弹海底的反射和折射

采用基于广义标准线性体Boltzmann叠加原理的固体流变模型来描述粘弹性海底底质结构,分析了沉积层和基岩的纵、横波速度频散和衰减的特点,计算了海水沉积层界面和沉积层基岩界面位移势反射和折射系数和能量反射和折射系数。结果表明,采取本模型的粘弹性海底的速度频散、衰减和已有文献的实验数据符合较好,能准确的描述海底底质的主要性质,反射和折射系数和声波的频率有关。      

三维浅海下弹性结构声辐射预报的有限元-抛物方程法

利用多物理场耦合有限元法对结构和流体适应性强、抛物方程声场计算高效准确的特点,提出了三维浅海波导下弹性结构声振特性研究的有限元-抛物方程法.该方法采用多物理场耦合有限元理论建立浅海下结构近场声辐射模型,计算局域波导下结构声振信息,并提取深度方向上复声压值作为抛物方程初始值;然后采用隐式差分法求解抛物方程以步进计算结构辐射声场.重点介绍了该方法对浅海下结构声辐射计算的准确性、高效性以及快速收敛性后,对Pekeris波导中有限长弹性圆柱壳的声振特性进行了分析.研究得出,当圆柱壳靠近海面(海底)时,其耦合频率比自由场下的要高(低),当潜深达到一定范围时,与自由场耦合频率基本趋于一致;在低频远场,结构辐射场与同强度点源声场具有一定的等效性,且等效距离随着频率增加而增加;由于辐射声场受结构振动模态、几何尺寸和简正波模式影响,结构辐射场传播的衰减规律按近场声影响区、球面波衰减区、介于球面波和柱面波衰减区、柱面波衰减区四个扩展区依次进行.     

A network approach for analysis of silencers with/without absorbent material

The object of this work is to establish a general approach that can analyze the performance of most of the silencers with/without sound absorbent material. Under the assumption of plane wave propagation, the transfer matrices between the two ends of straight pipe and two-duct perforated section are derived and taken as the basic elements. Based on the conditions of continuity of pressure and of mass velocity, the silencer is modeled as a network formed by the two basic elements. Then the sound attenuation characteristic of the silencers can be investigated. With this scheme the multiply connected acoustic filters can also be analyzed. Further, the porous sound absorbent material is also included in this scheme. The effect of sound absorption material on the performance of silencers is analyzed and discussed.     

A simple model of ultrasound propagation in a cavitating liquid. Part I: Theory, nonlinear attenuation and traveling wave generation

The bubbles involved in sonochemistry and other applications of cavitation oscillate inertially. A correct estimation of the wave attenuation in such bubbly media requires a realistic estimation of the power dissipated by the oscillation of each bubble, by thermal diffusion in the gas and viscous friction in the liquid. Both quantities and calculated numerically for a single inertial bubble driven at 20 kHz, and are found to be several orders of magnitude larger than the linear prediction. Viscous dissipation is found to be the predominant cause of energy loss for bubbles small enough. Then, the classical nonlinear Caflish equations describing the propagation of acoustic waves in a bubbly liquid are recast and simplified conveniently. The main harmonic part of the sound field is found to fulfill a nonlinear Helmholtz equation, where the imaginary part of the squared wave number is directly correlated with the energy lost by a single bubble. For low acoustic driving, linear theory is recovered, but for larger drivings, namely above the Blake threshold, the attenuation coefficient is found to be more than 3 orders of magnitude larger then the linear prediction. A huge attenuation of the wave is thus expected in regions where inertial bubbles are present, which is confirmed by numerical simulations of the nonlinear Helmholtz equation in a 1D standing wave configuration. The expected strong attenuation is not only observed but furthermore, the examination of the phase between the pressure field and its gradient clearly demonstrates that a traveling wave appears in the medium.     

An aeroacoustically driven thermoacoustic heat pump

The mean flow of gas in a pipe past a cavity can excite the resonant acoustic modes of the cavity--much like blowing across the top of a bottle. The periodic shedding of vortices from the leading edge of the mouth of the cavity feeds energy into the acoustic modes which, in turn, affect the shedding of the next vortex. This so-called aeroacoustic whistle can excite very high amplitude acoustic standing waves within a cavity defined by coaxial side branches closed at their ends. The amplitude of these standing waves can easily be 20% of the ambient pressure at optimal gas flow rates and ambient pressures within the main pipe. A standing wave thermoacoustic heat pump is a device which utilizes the in-phase pressure and displacement oscillations to pump heat across a porous medium thereby establishing, or maintaining, a temperature gradient. Experimental results of a combined system of aeroacoustic sound source and a simple thermoacoustic stack will be presented.     

Airborne ultrasound for the precipitation of smokes and powders and the destruction of foams

Sonochemistry is generally associated with the use of power ultrasound in liquid media. Under such circumstances acoustic cavitation can drive a range of reactions and processes. The use of airborne ultrasound in processing is less familiar because of the difficulties that relate to the use of ultrasound in gaseous systems. Firstly there is a greater attenuation (power loss) in the transmission of sound through air compared with that through liquid. Secondly the transfer of acoustic energy generated in air into a liquid or solid material is inefficient due to the mismatch between acoustic impedances of gases and solids or liquids. Despite this, applications do exist for airborne ultrasound but the source must be very powerful and efficient. In this way one can obtain levels of intensities at which it is possible to use ultrasound for specific applications such as to agglomerate fine dusts and to break down foams.     

含少量气泡流体饱和孔隙介质中的弹性波

考虑孔隙流体中含有少量气泡,且气泡在声波作用下线性振动,研究声波在这种孔隙介质中的传播特性.本文先由流体质量守恒方程和孔隙度微分与流体压力微分的关系推导出了含有气泡形式的渗流连续性方程;在处理渗流连续性方程中的气体体积分数时间导数时,应用Commander气泡线性振动理论导出气体体积分数时间导数与流体压强时间导数的关系,进而得到了修正的Biot形式的渗流连续性方程;最后结合Biot动力学方程求得了含气泡形式的位移场方程,便可得到两类纵波及一类横波的声学特性.通过对快、慢纵波的频散、衰减及两类波引起的流体位移与固体位移关系的考察,发现少量气泡的存在对快纵波和慢纵波的传播特性影响较大.     

Nonlinear raman-type acoustic scattering in three-phase marine sediments

Stimulated Raman-type acoustic scattering by bubble oscillations in three-phase marine sediments, which consist of a solid frame, the pore water, and air bubbles, is considered. A model is developed for the case of the bubbles surrounded by water. The acoustic properties of the sediments are described on the basis of the Biot theory of sound propagation in a fluid-saturated porous medium. Nonlinear wave equations are obtained for marine sediments containing air bubbles. Expressions for the nonlinear scattering coefficient and the threshold intensity of the exciting sound wave are derived. A possibility of an experimental observation of the scattering process is discussed.